Pull MTD updates from Boris Brezillon:
 "MTD Core:
   - Remove support for asynchronous erase (not implemented by any of
     the existing drivers anyway)
   - Remove Cyrille from the list of SPI NOR and MTD maintainers
   - Fix kernel doc headers
   - Allow users to define the partitions parsers they want to test
     through a DT property (compatible of the partitions subnode)
   - Remove the bfin-async-flash driver (the only architecture using it
     has been removed)
   - Fix pagetest test
   - Add extra checks in mtd_erase()
   - Simplify the MTD partition creation logic and get rid of
     mtd_add_device_partitions()

  MTD Drivers:
   - Add endianness information to the physmap DT binding
   - Add Eon EN29LV400A IDs to JEDEC probe logic
   - Use %*ph where appropriate

  SPI NOR Drivers:
   - Make fsl-quaspi assign different names to MTD devices connected to
     the same QSPI controller
   - Remove an unneeded driver.bus assigned in the fsl-qspi driver

  NAND Core:
   - Prepare arrival of the SPI NAND subsystem by implementing a generic
     (interface-agnostic) layer to ease manipulation of NAND devices
   - Move onenand code base to the drivers/mtd/nand/ dir
   - Rework timing mode selection
   - Provide a generic way for NAND chip drivers to flag a specific
     GET/SET FEATURE operation as supported/unsupported
   - Stop embedding ONFI/JEDEC param page in nand_chip

  NAND Drivers:
   - Rework/cleanup of the mxc driver
   - Various cleanups in the vf610 driver
   - Migrate the fsmc and vf610 to ->exec_op()
   - Get rid of the pxa driver (replaced by marvell_nand)
   - Support ->setup_data_interface() in the GPMI driver
   - Fix probe error path in several drivers
   - Remove support for unused hw_syndrome mode in sunxi_nand
   - Various minor improvements"

* tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits)
  dt-bindings: fsl-quadspi: Add the example of two SPI NOR
  mtd: fsl-quadspi: Distinguish the mtd device names
  mtd: nand: Fix some function description mismatches in core.c
  mtd: fsl-quadspi: Remove unneeded driver.bus assignment
  mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk
  mtd: rawnand: s3c2410: enhance the probe function error path
  mtd: rawnand: tango: fix probe function error path
  mtd: rawnand: sh_flctl: fix the probe function error path
  mtd: rawnand: omap2: fix the probe function error path
  mtd: rawnand: mxc: fix probe function error path
  mtd: rawnand: denali: fix probe function error path
  mtd: rawnand: davinci: fix probe function error path
  mtd: rawnand: cafe: fix probe function error path
  mtd: rawnand: brcmnand: fix probe function error path
  mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode
  mtd: rawnand: marvell: Fix clock resource by adding a register clock
  mtd: ftl: Use DIV_ROUND_UP()
  mtd: Fix some function description mismatches in mtdcore.c
  mtd: physmap_of: update struct map_info's swap as per map requirement
  dt-bindings: mtd-physmap: Add endianness supports
  ...

Merge tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - DM core passthrough ioctl fix to retain reference to DM table, and
   that table's block devices, while issuing the ioctl to one of those
   block devices.

 - DM core passthrough ioctl fix to _not_ override the fmode_t used to
   issue the ioctl. Overriding by using the fmode_t that the block
   device was originally open with during DM table load is a liability.

 - Add DM core support for secure erase forwarding and update the DM
   linear and DM striped targets to support them.

 - A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
   same, write zeroes) for targets that make use of the non-splitting IO
   variant (as is done for multipath or thinp when layered directly on
   NVMe).

 - Allow DM targets to return a payload in response to a DM message that
   they are sent. This is useful for DM targets that would like to
   provide statistics data in response to DM messages.

 - Update DM bufio to support non-power-of-2 block sizes. Numerous other
   related changes prepare the DM bufio code for this support.

 - Fix DM crypt to use a bounded amount of memory across the entire
   system. This is to avoid OOM that can otherwise occur in response to
   certain pathological IO workloads (e.g. discarding a large DM crypt
   device).

 - Add a 'check_at_most_once' feature to the DM verity target to allow
   verity to be used on mobile devices that have very limited resources.

 - Fix the DM integrity target to fail early if a keyed algorithm (e.g.
   HMAC) is to be used but the key isn't set.

 - Add non-power-of-2 support to the DM unstripe target.

 - Eliminate the use of a Variable Length Array in the DM stripe target.

 - Update the DM log-writes target to record metadata (REQ_META flag).

 - DM raid fixes for its nosync status and some variable range issues.

* tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
  dm: remove fmode_t argument from .prepare_ioctl hook
  dm: hold DM table for duration of ioctl rather than use blkdev_get
  dm raid: fix parse_raid_params() variable range issue
  dm verity: make verity_for_io_block static
  dm verity: add 'check_at_most_once' option to only validate hashes once
  dm bufio: don't embed a bio in the dm_buffer structure
  dm bufio: support non-power-of-two block sizes
  dm bufio: use slab cache for dm_buffer structure allocations
  dm bufio: reorder fields in dm_buffer structure
  dm bufio: relax alignment constraint on slab cache
  dm bufio: remove code that merges slab caches
  dm bufio: get rid of slab cache name allocations
  dm bufio: move dm-bufio.h to include/linux/
  dm bufio: delete outdated comment
  dm: add support for secure erase forwarding
  dm: backfill abnormal IO support to non-splitting IO submission
  dm raid: fix nosync status
  dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios()
  dm stripe: get rid of a Variable Length Array (VLA)
  dm log writes: record metadata flag for better flags record
  ...

Pull misc vfs updates from Al Viro:
 "Assorted stuff, including Christoph's I_DIRTY patches"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: move I_DIRTY_INODE to fs.h
  ubifs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call
  ntfs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call
  gfs2: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) calls
  fs: fold open_check_o_direct into do_dentry_open
  vfs: Replace stray non-ASCII homoglyph characters with their ASCII equivalents
  vfs: make sure struct filename->iname is word-aligned
  get rid of pointless includes of fs_struct.h
  [poll] annotate SAA6588_CMD_POLL users

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main addition this time around is the new ARM "SCMI" framework,
  which is the latest in a series of standards coming from ARM to do
  power management in a platform independent way.

  This has been through many review cycles, and it relies on a rather
  interesting way of using the mailbox subsystem, but in the end I
  agreed that Sudeep's version was the best we could do after all.

  Other changes include:

   - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
     which makes more sense. Similarly, the performance monitoring
     portion of the CCI driver are moved the same way and cleaned up a
     little more.

   - a series of updates to the SCPI framework

   - support for the Mediatek mt7623a SoC in drivers/soc

   - support for additional NVIDIA Tegra hardware in drivers/soc

   - a new reset driver for Socionext Uniphier

   - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
     drivers/firmware and drivers/reset across platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  reset: uniphier: add ethernet reset control support for PXs3
  reset: stm32mp1: Enable stm32mp1 reset driver
  dt-bindings: reset: add STM32MP1 resets
  reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
  reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
  clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
  firmware: arm_scmi: prevent accessing rate_discrete uninitialized
  hwmon: (scmi) return -EINVAL when sensor information is unavailable
  amlogic: meson-gx-socinfo: Update soc ids
  soc/tegra: pmc: Use the new reset APIs to manage reset controllers
  soc: mediatek: update power domain data of MT2712
  dt-bindings: soc: update MT2712 power dt-bindings
  cpufreq: scmi: add thermal dependency
  soc: mediatek: fix the mistaken pointer accessed when subdomains are added
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
  soc: mediatek: avoid hardcoded value with bus_prot_mask
  dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
  dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is the usual set of changes for device trees, with over 700
  non-merged changesets. There is an ongoing set of dtc warning fixes
  and the usual bugfixes, cleanups and added device support.

  The most interesting bit as usual is support for new machines listed
  below:

   - The Allwinner H6 makes its debut with the Pine-H64 board, and we
     get two new machines based on its older siblings: the H5 based
     OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
     32-bit side, we add The Olimex som204 based on Allwinner A20, and
     the Banana Pi M2 Zero development board (based on H2).

   - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
     development board and p2888 CPU module.

   - The Nuvoton npcm750 is a BMC that was newly added, for now we only
     support running on the evaluation board.

   - STmicroelectronics stm32 gains support for the stm32mp157c and two
     evaluation boards.

   - The Toradex Colibri board family grows a few members based on the
     i.MX6ULL variant.

   - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
     of chips.

   - The Phytec phyBOARD Mira is a family of industrial boards based on
     i.MX6. For now, four models get added.

   - TI am335x based PDU-001 is an industrial embedded machine used for
     traffic monitoring

   - The Aspeed platform now supports running on the BMC on the Qualcomm
     Centriq 2400 server

   - Samsung Exynos4 based Galaxy S3 is a family of mobile phones
     Qualcomm msm8974 based Galaxy S5 is a rather different phone made
     by the same company.

   - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
     for the various boards made by Xilinx themselves, as well as the
     Digilent Zybo Z7.

   - The ARM Versatile family now supports the "IB2" interface board.

   - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
     evaluation boards named after a kind of beer, as most of them are.
     The r8a77980 (V3H) based "Condor" apparently doesn't follow that
     tradition. ;-)

   - ROC-RK3328-CC is a simple developement board from the Libre
     Computer Project, based on the Rockchips RK3328 SoC

   - Haiku is another development board plus Qseven module based on
     Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
  arm: dts: modify Nuvoton NPCM7xx device tree structure
  arm: dts: modify Makefile NPCM750 configuration name
  arm: dts: modify clock binding in NPCM750 device tree
  arm: dts: modify timer register size in NPCM750 device tree
  arm: dts: modify UART compatible name in NPCM750 device tree
  arm: dts: add watchdog device to NPCM750 device tree
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
  ...

Pull DeviceTree updates from Rob Herring:

 - Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a
   bunch more warnings (hidden behind W=1).

 - Build dtc lexer and parser files instead of using shipped versions.

 - Rework overlay apply API to take an FDT as input and apply overlays
   in a single step.

 - Add a phandle lookup cache. This improves boot time by hundreds of
   msec on systems with large DT.

 - Add trivial mcp4017/18/19 potentiometers bindings.

 - Remove VLA stack usage in DT code.

* tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (26 commits)
  of: unittest: fix an error code in of_unittest_apply_overlay()
  of: unittest: move misplaced function declaration
  of: unittest: Remove VLA stack usage
  of: overlay: Fix forgotten reference to of_overlay_apply()
  of: Documentation: Fix forgotten reference to of_overlay_apply()
  of: unittest: local return value variable related cleanups
  of: unittest: remove unneeded local return value variables
  dt-bindings: trivial: add various mcp4017/18/19 potentiometers
  of: unittest: fix an error test in of_unittest_overlay_8()
  of: cache phandle nodes to reduce cost of of_find_node_by_phandle()
  dt-bindings: rockchip-dw-mshc: use consistent clock names
  MAINTAINERS: Add linux/of_*.h headers to appropriate subsystems
  scripts: turn off some new dtc warnings by default
  scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987
  scripts/dtc: generate lexer and parser during build instead of shipping
  powerpc: boot: add strrchr function
  of: overlay: do not include path in full_name of added nodes
  of: unittest: clean up changeset test
  arm64/efi: Make strrchr() available to the EFI namespace
  ARM: boot: add strrchr function
  ...

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo updates from Eric Biederman:
 "The work on cleaning up and getting the bugs out of siginfo generation
  was largely stalled this round. The progress that was made was the
  definition of FPE_FLTUNK. Which is usable to fix many of the cases
  where siginfo generation is erroneously generating SI_USER by setting
  si_code to 0, that has recently been tagged as FPE_FIXME.

  You already have the change by way of the arm64 tree as that
  definition was pulled into the arm64 tree to allow fixing the problem
  there.

  What remains is the second round of fixing for what I thought was a
  trivial change to the struct siginfo when put the union in _sigfault
  where it belongs. Do to historical reasons 32bit m68k only ensures
  that pointers are 2 byte aligned. So I have added a m68k test case
  made of BUILD_BUG_ONs to verify I have this fix correct and possibly
  catch problems, and I have computed the number of bytes of padding
  needed for the _addr_bnd and _addr_pkey cases and just use an array of
  characters that size.

  For pure paranoia I have written the code so if there is an
  architecture out there that does not perform any alignment of
  structures it should still work.

  With the removal of all of the stale arechitectures this cycle future
  work on cleaning up struct siginfo should be much easier. Almost all
  of the conflicting si_code definitions have been removed with the
  removal of (blackfin, tile, and frv). Plus some of the most difficult
  to test cases have simply been removed from the tree.

  Which means that with a little luck copy_siginfo_to_user can become a
  light weight wrapper around copy_to_user in the next cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  m68k: Verify the offsets in struct siginfo never change.
  signal: Correct the offset of si_pkey and si_lower in struct siginfo on m68k

Pull printk updates from Petr Mladek:

 - Add info about loaded kdump kernel into the dump stack header

 - Move dump-stack related code from printk.c to lib/dump_stack.c

 - Write message about suspending consoles in KERN_INFO log level

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: change message to pr_info
  printk: move dump stack related code to lib/dump_stack.c
  print kdump kernel loaded status in stack dump

Pull misc filesystem updates from Jan Kara:
 "udf, ext2, quota, fsnotify fixes & cleanups:

   - udf fixes for handling of media without uid/gid

   - udf fixes for some corner cases in parsing of volume recognition
     sequence

   - improvements of fsnotify handling of ENOMEM

   - new ioctl to allow setting of watch descriptor id for inotify (for
     checkpoint - restart)

   - small ext2, reiserfs, quota cleanups"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Kill an unused extern entry form quota.h
  reiserfs: Remove VLA from fs/reiserfs/reiserfs.h
  udf: fix potential refcnt problem of nls module
  ext2: change return code to -ENOMEM when failing memory allocation
  udf: Do not mark possibly inconsistent filesystems as closed
  fsnotify: Let userspace know about lost events due to ENOMEM
  fanotify: Avoid lost events due to ENOMEM for unlimited queues
  udf: Remove never implemented mount options
  udf: Update mount option documentation
  udf: Provide saner default for invalid uid / gid
  udf: Clean up handling of invalid uid/gid
  udf: Apply uid/gid mount options also to new inodes & chown
  udf: Ignore [ug]id=ignore mount options
  udf: Fix handling of Partition Descriptors
  udf: Unify common handling of descriptors
  udf: Convert descriptor index definitions to enum
  udf: Allow volume descriptor sequence to be terminated by unrecorded block
  udf: Simplify handling of Volume Descriptor Pointers
  udf: Fix off-by-one in volume descriptor sequence length
  inotify: Extend ioctl to allow to request id of new watch descriptor

Pull nfsd updates from Bruce Fields:
 "Chuck Lever did a bunch of work on nfsd tracepoints, on RDMA, and on
  server xdr decoding (with an eye towards eliminating a data copy in
  the RDMA case).

  I did some refactoring of the delegation code in preparation for
  eliminating some delegation self-conflicts and implementing write
  delegations"

* tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linux: (40 commits)
  nfsd: fix incorrect umasks
  sunrpc: remove incorrect HMAC request initialization
  NFSD: Clean up legacy NFS SYMLINK argument XDR decoders
  NFSD: Clean up legacy NFS WRITE argument XDR decoders
  nfsd: Trace NFSv4 COMPOUND execution
  nfsd: Add I/O trace points in the NFSv4 read proc
  nfsd: Add I/O trace points in the NFSv4 write path
  nfsd: Add "nfsd_" to trace point names
  nfsd: Record request byte count, not count of vectors
  nfsd: Fix NFSD trace points
  svc: Report xprt dequeue latency
  sunrpc: Report per-RPC execution stats
  sunrpc: Re-purpose trace_svc_process
  sunrpc: Save remote presentation address in svc_xprt for trace events
  sunrpc: Simplify trace_svc_recv
  sunrpc: Simplify do_enqueue tracing
  sunrpc: Move trace_svc_xprt_dequeue()
  sunrpc: Update show_svc_xprt_flags() to include recently added flags
  svc: Simplify ->xpo_secure_port
  sunrpc: Remove unneeded pointer dereference
  ...

Pull f2fs update from Jaegeuk Kim:
 "In this round, we've mainly focused on performance tuning and critical
  bug fixes occurred in low-end devices. Sheng Yong introduced
  lost_found feature to keep missing files during recovery instead of
  thrashing them. We're preparing coming fsverity implementation. And,
  we've got more features to communicate with users for better
  performance. In low-end devices, some memory-related issues were
  fixed, and subtle race condtions and corner cases were addressed as
  well.

  Enhancements:
   - large nat bitmaps for more free node ids
   - add three block allocation policies to pass down write hints given by user
   - expose extension list to user and introduce hot file extension
   - tune small devices seamlessly for low-end devices
   - set readdir_ra by default
   - give more resources under gc_urgent mode regarding to discard and cleaning
   - introduce fsync_mode to enforce posix or not
   - nowait aio support
   - add lost_found feature to keep dangling inodes
   - reserve bits for future fsverity feature
   - add test_dummy_encryption for FBE

  Bug fixes:
   - don't use highmem for dentry pages
   - align memory boundary for bitops
   - truncate preallocated blocks in write errors
   - guarantee i_times on fsync call
   - clear CP_TRIMMED_FLAG correctly
   - prevent node chain loop during recovery
   - avoid data race between atomic write and background cleaning
   - avoid unnecessary selinux violation warnings on resgid option
   - GFP_NOFS to avoid deadlock in quota and read paths
   - fix f2fs_skip_inode_update to allow i_size recovery

  In addition to the above, there are several minor bug fixes and clean-ups"

* tag 'f2fs-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
  f2fs: remain written times to update inode during fsync
  f2fs: make assignment of t->dentry_bitmap more readable
  f2fs: truncate preallocated blocks in error case
  f2fs: fix a wrong condition in f2fs_skip_inode_update
  f2fs: reserve bits for fs-verity
  f2fs: Add a segment type check in inplace write
  f2fs: no need to initialize zero value for GFP_F2FS_ZERO
  f2fs: don't track new nat entry in nat set
  f2fs: clean up with F2FS_BLK_ALIGN
  f2fs: check blkaddr more accuratly before issue a bio
  f2fs: Set GF_NOFS in read_cache_page_gfp while doing f2fs_quota_read
  f2fs: introduce a new mount option test_dummy_encryption
  f2fs: introduce F2FS_FEATURE_LOST_FOUND feature
  f2fs: release locks before return in f2fs_ioc_gc_range()
  f2fs: align memory boundary for bitops
  f2fs: remove unneeded set_cold_node()
  f2fs: add nowait aio support
  f2fs: wrap all options with f2fs_sb_info.mount_opt
  f2fs: Don't overwrite all types of node to keep node chain
  f2fs: introduce mount option for fsync mode
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
  ufs, mpt3sas, hisi_sas.

  In addition we have removed several really old drivers: sym53c416,
  NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
  initialization from all remaining drivers.

  Plus an assortment of bug fixes, initialization errors and other minor
  fixes"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
  scsi: ufs: Add support for Auto-Hibernate Idle Timer
  scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
  scsi: qla2xxx: fx00 copypaste typo
  scsi: qla2xxx: fix error message on <qla2400
  scsi: smartpqi: update driver version
  scsi: smartpqi: workaround fw bug for oq deletion
  scsi: arcmsr: Change driver version to v1.40.00.05-20180309
  scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
  scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
  scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
  scsi: qla2xxx: Update driver version to 10.00.00.06-k
  scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
  scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
  scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
  scsi: qla2xxx: Remove nvme_done_list
  scsi: qla2xxx: Return busy if rport going away
  scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
  scsi: qla2xxx: Add FC-NVMe abort processing
  scsi: qla2xxx: Add changes for devloss timeout in driver
  ...

Pull block layer updates from Jens Axboe:
 "It's a pretty quiet round this time, which is nice. This contains:

   - series from Bart, cleaning up the way we set/test/clear atomic
     queue flags.

   - series from Bart, fixing races between gendisk and queue
     registration and removal.

   - set of bcache fixes and improvements from various folks, by way of
     Michael Lyle.

   - set of lightnvm updates from Matias, most of it being the 1.2 to
     2.0 transition.

   - removal of unused DIO flags from Nikolay.

   - blk-mq/sbitmap memory ordering fixes from Omar.

   - divide-by-zero fix for BFQ from Paolo.

   - minor documentation patches from Randy.

   - timeout fix from Tejun.

   - Alpha "can't write a char atomically" fix from Mikulas.

   - set of NVMe fixes by way of Keith.

   - bsg and bsg-lib improvements from Christoph.

   - a few sed-opal fixes from Jonas.

   - cdrom check-disk-change deadlock fix from Maurizio.

   - various little fixes, comment fixes, etc from various folks"

* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
  blk-mq: Directly schedule q->timeout_work when aborting a request
  blktrace: fix comment in blktrace_api.h
  lightnvm: remove function name in strings
  lightnvm: pblk: remove some unnecessary NULL checks
  lightnvm: pblk: don't recover unwritten lines
  lightnvm: pblk: implement 2.0 support
  lightnvm: pblk: implement get log report chunk
  lightnvm: pblk: rename ppaf* to addrf*
  lightnvm: pblk: check for supported version
  lightnvm: implement get log report chunk helpers
  lightnvm: make address conversions depend on generic device
  lightnvm: add support for 2.0 address format
  lightnvm: normalize geometry nomenclature
  lightnvm: complete geo structure with maxoc*
  lightnvm: add shorten OCSSD version in geo
  lightnvm: add minor version to generic geometry
  lightnvm: simplify geometry structure
  lightnvm: pblk: refactor init/exit sequences
  lightnvm: Avoid validation of default op value
  lightnvm: centralize permission check for lightnvm ioctl
  ...

Pull EDAC updates from Borislav Petkov:
 "Noteworthy is the NVDIMM support:

   - NVDIMM support to EDAC (Tony Luck)

   - misc fixes"

* tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, sb_edac: Remove variable length array usage
  EDAC, skx_edac: Detect non-volatile DIMMs
  firmware, DMI: Add function to look up a handle and return DIMM size
  acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle
  EDAC: Add new memory type for non-volatile DIMMs
  EDAC: Drop duplicated array of strings for memory type names
  EDAC, layerscape: Allow building for LS1021A

In the effort to remove all VLAs from the kernel[1], it is desirable to
build with -Wvla.  However, this warning is overly pessimistic, in that
it is only happy with stack array sizes that are declared as constant
expressions, and not constant values.  One case of this is the
evaluation of the max() macro which, due to its construction, ends up
converting constant expression arguments into a constant value result.

All attempts to rewrite this macro with __builtin_constant_p() failed
with older compilers (e.g.  gcc 4.4)[2].  However, Martin Uecker,
constructed[3] a mind-shattering solution that works everywhere.
Cthulhu fhtagn!

This patch updates the min()/max() macros to evaluate to a constant
expression when called on constant expression arguments.  This removes
several false-positive stack VLA warnings from an x86 allmodconfig build
when -Wvla is added:

  $ diff -u before.txt after.txt | grep ^-
  -drivers/input/touchscreen/cyttsp4_core.c:871:2: warning: ISO C90 forbids variable length array ‘ids’ [-Wvla]
  -fs/btrfs/tree-checker.c:344:4: warning: ISO C90 forbids variable length array ‘namebuf’ [-Wvla]
  -lib/vsprintf.c:747:2: warning: ISO C90 forbids variable length array ‘sym’ [-Wvla]
  -net/ipv4/proc.c:403:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
  -net/ipv6/proc.c:198:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
  -net/ipv6/proc.c:218:2: warning: ISO C90 forbids variable length array ‘buff64’ [-Wvla]

This also updates two cases where different enums were being compared
and explicitly casts them to int (which matches the old side-effect of
the single-evaluation code): one in tpm/tpm_tis_core.h, and one in
drm/drm_color_mgmt.c.

 [1] https://lkml.org/lkml/2018/3/7/621
 [2] https://lkml.org/lkml/2018/3/10/170
 [3] https://lkml.org/lkml/2018/3/20/845Co-Developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-Developed-by: Martin Uecker <Martin.Uecker@med.uni-goettingen.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:

 - new driver for PhoenixRC Flight Controller Adapter

 - new driver for RAVE SP Power button

 - fixes for autosuspend-related deadlocks in a few unput USB dirvers

 - support for 2nd wheel in ATech PS/2 mouse

 - fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370

 - bunch of cleanups in various in PS/2 protocols

 - other assorted changes and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
  Input: stmfts, s6sy761 - update my e-mail
  Input: stmfts - use async probe & suspend/resume to avoid 2s delay
  Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
  Input: xpad - add PDP device id 0x02a4
  Input: alps - report pressure of v3 and v7 trackstick
  Input: pxrc - new driver for PhoenixRC Flight Controller Adapter
  Input: usbtouchscreen - do not rely on input_dev->users
  Input: usbtouchscreen - fix deadlock in autosuspend
  Input: pegasus_notetaker - do not rely on input_dev->users
  Input: pagasus_notetaker - fix deadlock in autosuspend
  Input: synaptics_usb - do not rely on input_dev->users
  Input: synaptics_usb - fix deadlock in autosuspend
  Input: gpio-keys - add support for wakeup event action
  Input: appletouch - use true and false for boolean values
  Input: silead - add Chuwi Hi8 support
  Input: analog - use get_cycles() on PPC
  Input: stmpe-keypad - remove VLA usage
  Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
  Input: add RAVE SP Powerbutton driver
  ...

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  kfifo: fix inaccurate comment
  tools/thermal: tmon: fix for segfault
  net: Spelling s/stucture/structure/
  edd: don't spam log if no EDD information is present
  Documentation: Fix early-microcode.txt references after file rename
  tracing: Block comments should align the * on each line
  treewide: Fix typos in printk
  GenWQE: Fix a typo in two comments
  treewide: Align function definition open/close braces

Pull HID updates from Jiri Kosina:

 - 3rd generation Wacom Intuos BT device support from Aaron Armstrong
   Skomra

 - support for NSG-MR5U and NSG-MR7U devices from Todd Kelner

 - multitouch Razer Blade Stealth support from Benjamin Tissoires

 - Elantech touchpad support from Alexandrov Stansilav

 - a few other scattered-around fixes and cleanups to drivers and
   generic code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits)
  HID: google: Enable PM Full On mode when adjusting backlight
  HID: google: add google hammer HID driver
  HID: core: reset the quirks before calling probe again
  HID: multitouch: do not set HID_QUIRK_NO_INIT_REPORTS
  HID: core: remove the need for HID_QUIRK_NO_EMPTY_INPUT
  HID: use BIT() macro for quirks too
  HID: use BIT macro instead of plain integers for flags
  HID: multitouch: remove dead zones of Razer Blade Stealth
  HID: multitouch: export a quirk for the button handling of touchpads
  HID: usbhid: extend the polling interval configuration to keyboards
  HID: ntrig: document sysfs interface
  HID: wacom: wacom_wac_collection() is local to wacom_wac.c
  HID: wacom: generic: add the "Report Valid" usage
  HID: wacom: generic: Support multiple tools per report
  HID: wacom: Add support for 3rd generation Intuos BT
  HID: core: rewrite the hid-generic automatic unbind
  HID: sony: Add touchpad support for NSG-MR5U and NSG-MR7U remotes
  HID: hid-multitouch: Use true and false for boolean values
  HID: hid-ntrig: use true and false for boolean values
  HID: logitech-hidpp: document sysfs interface
  ...

Pull sound updates from Takashi Iwai:
 "This became a large update. The changes are scattered widely, and the
  majority of them are attributed to ASoC componentization. The gitk
  output made me dizzy, but it's slightly better than London tube.

  OK, below are some highlights:

   - Continued hardening works in ALSA PCM core; most of the existing
     syzkaller reports should have been covered.

   - USB-audio got the initial USB Audio Class 3 support, as well as
     UAC2 jack detection support and more DSD-device support.

   - ASoC componentization: finally each individual driver was converted
     to components framework, which is more future-proof for further
     works. Most of conversations were systematic.

   - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek
     codecs, typically tablets and small PCs.

   - Fixes / cleanups for Samsung Odroid systems

   - Cleanups in Freescale SSI driver

   - New ASoC drivers:
      * AKM AK4458 and AK5558 codecs
      * A few AMD based machine drivers
      * Intel Kabylake machine drivers
      * Maxim MAX9759 codec
      * Motorola CPCAP codec
      * Socionext Uniphier SoCs
      * TI PCM1789 and TDA7419 codecs

   - Retirement of Blackfin drivers along with architecture removal"

* tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits)
  ALSA: pcm: Fix UAF at PCM release via PCM timer access
  ALSA: usb-audio: silence a static checker warning
  ASoC: tscs42xx: Remove owner assignment from i2c_driver
  ASoC: mediatek: remove "simple-mfd" in the example
  ASoC: cpcap: replace codec to component
  ASoC: Intel: bytcr_rt5651: don't use codec anymore
  ASoC: amd: don't use codec anymore
  ALSA: usb-audio: fix memory leak on cval
  ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls
  ASoC: topology: Fix kcontrol name string handling
  ALSA: aloop: Mark paused device as inactive
  ALSA: usb-audio: update clock valid control
  ALSA: usb-audio: UAC2 jack detection
  ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
  ALSA: pcm: Avoid potential races between OSS ioctls and read/write
  ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs.
  ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC
  ALSA: usb-audio: Add native DSD support for Luxman DA-06
  ALSA: usb-audio: fix uac control query argument
  ASoC: nau8824: recover system clock when device changes
  ...

Pull dma-mapping updates from Christoph Hellwig:
 "Very light this round as the interesting dma mapping changes went
  through the x86 tree.

  This just provides proper stubs for architectures not supporting dma
  (Geert Uytterhoeven)"

* tag 'dma-mapping-4.17' of git://git.infradead.org/users/hch/dma-mapping:
  usb: gadget: Add NO_DMA dummies for DMA mapping API
  scsi: Add NO_DMA dummies for SCSI DMA mapping API
  mm: Add NO_DMA dummies for DMA pool API
  dma-coherent: Add NO_DMA dummies for managed DMA API
  dma-mapping: Convert NO_DMA get_dma_ops() into a real dummy

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.17 kernel cycle:

  New drivers:

   - Nintendo Wii GameCube GPIO, known as "Hollywood"

   - Raspberry Pi mailbox service GPIO expander

   - Spreadtrum main SC9860 SoC and IEC GPIO controllers.

  Improvements:

   - Implemented .get_multiple() callback for most of the
     high-performance industrial GPIO cards for the ISA bus.

   - ISA GPIO drivers now select the ISA_BUS_API instead of depending on
     it. This is merged with the same pattern for all the ISA drivers
     and some other Kconfig cleanups related to this.

  Cleanup:

   - Delete the TZ1090 GPIO drivers following the deletion of this SoC
     from the ARM tree.

   - Move the documentation over to driver-api to conform with the rest
     of the kernel documentation build.

   - Continue to make the GPIO drivers include only
     <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we
     want to get rid of.

   - Managed to remove VLA allocation from two drivers pending more
     fixes in this area for the next merge window.

   - Misc janitorial fixes"

* tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: Add Spreadtrum PMIC EIC driver support
  gpio: Add Spreadtrum EIC driver support
  dt-bindings: gpio: Add Spreadtrum EIC controller documentation
  gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
  pinctrl: qcom: Don't allow protected pins to be requested
  gpiolib: Support 'gpio-reserved-ranges' property
  gpiolib: Change bitmap allocation to kmalloc_array
  gpiolib: Extract mask allocation into subroutine
  dt-bindings: gpio: Add a gpio-reserved-ranges property
  gpio: mockup: fix a potential crash when creating debugfs entries
  gpio: pca953x: add compatibility for pcal6524 and pcal9555a
  gpio: dwapb: Add support for a bus clock
  gpio: Remove VLA from xra1403 driver
  gpio: Remove VLA from MAX3191X driver
  gpio: ws16c48: Implement get_multiple callback
  gpio: gpio-mm: Implement get_multiple callback
  gpio: 104-idi-48: Implement get_multiple callback
  gpio: 104-dio-48e: Implement get_multiple callback
  gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
  gpio: pci-idio-16: Implement get_multiple callback
  ...

Modify configuration and MakeFile
for the Nuvoton NPCM and NPCM7xx BMC.

[arnd: took this one late, since it fixes some build problems
 with the original commit]
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull support for 3rd generation Intuos BT device

Pull a few small generic code cleanups.

Pull support for NSG-MR5U and NSG-MR7U devices.

Pull Razer Blade Stealth support improvement and a few generic cleanups

Small hid-i2c acpi cleanup.

Pull new hid-elan driver, currently providing support for touchpad
found in certain HP Pavilion x2 laptops.

Support for Google Hammer device.

Support for new elecom device.

Modify Nuvoton NPCM7xx device tree structure by adding
nuvoton common nNPCM7xx device tree structure that
include all common modules.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Modify clock binding in a common device tree for all Nuvoton
NPCM750 BMCs.

Modify NPCM750 modules clock numbers accourding the new
clock driver.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Modify timer register size in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Modify UART compatible name in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add watchdog device node to a common device tree for all Nuvoton
NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg)
evaluation board.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'davinci-for-v4.17/soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci SoC update fixes for v4.17" from Sekhar Nori:

A fix and a clean-up patch for content previously queued for v4.17.

* tag 'davinci-for-v4.17/soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data

Synaptics has acquired the Multimedia Solutions Business of Marvell[1].
So change the berlin entry name and move it to its alphabetical
location. We move to ARM/Synaptics instead of ARM/Marvell.

This patch also updates my email address from marvell to synaptics.

[1] https://www.synaptics.com/company/news/conexant-marvellSigned-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

When CONFIG_CACHE_L2X0 is disabled, the am43xx specific suspend
implemnentation fails to link:

arch/arm/mach-omap2/sleep43xx.o: In function `get_l2cache_base':
(.text+0x180): undefined reference to `omap4_get_l2cache_base'

This adds an #ifdef protection around the code, like we do for am44xx.

Fixes: 41d37e61 ("ARM: OMAP2+: Introduce low-level suspend code for AM43XX")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>