- 27 Oct, 2021 3 commits
-
-
Collin Walling authored
The diag 318 data contains values that denote information regarding the guest's environment. Currently, it is unecessarily difficult to observe this value (either manually-inserted debug statements, gdb stepping, mem dumping etc). It's useful to observe this information to obtain an at-a-glance view of the guest's environment, so lets add a simple VCPU event that prints the CPNC to the s390dbf logs. Signed-off-by:
Collin Walling <walling@linux.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20211027025451.290124-1-walling@linux.ibm.com [borntraeger@de.ibm.com]: change debug level to 3 Signed-off-by:
-
Claudio Imbrenda authored
Introduce variants of the convert and destroy page functions that also clear the PG_arch_1 bit used to mark them as secure pages. The PG_arch_1 flag is always allowed to overindicate; using the new functions introduced here allows to reduce the extent of overindication and thus improve performance. These new functions can only be called on pages for which a reference is already being held. Signed-off-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
-
Janis Schoetterl-Glausch authored
If handle_sske cannot set the storage key, because there is no page table entry or no present large page entry, it calls fixup_user_fault. However, currently, if the call succeeds, handle_sske returns -EAGAIN, without having set the storage key. Instead, retry by continue'ing the loop without incrementing the address. The same issue in handle_pfmf was fixed by a11bdb1a ("KVM: s390: Fix pfmf and conditional skey emulation"). Fixes: bd096f64 ("KVM: s390: Add skey emulation fault handling") Signed-off-by:
Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by:
-
- 25 Oct, 2021 14 commits
-
-
Eric Farman authored
This capability exists, but we don't record anything when userspace enables it. Let's refactor that code so that a note can be made in the debug logs that it was enabled. Signed-off-by:
Eric Farman <farman@linux.ibm.com> Reviewed-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20211008203112.1979843-7-farman@linux.ibm.comSigned-off-by:
-
Eric Farman authored
The Principles of Operations describe the various reasons that each individual SIGP orders might be rejected, and the status bit that are set for each condition. For example, for the Set Architecture order, it states: "If it is not true that all other CPUs in the configu- ration are in the stopped or check-stop state, ... bit 54 (incorrect state) ... is set to one." However, it also states: "... if the CZAM facility is installed, ... bit 55 (invalid parameter) ... is set to one." Since the Configuration-z/Architecture-Architectural Mode (CZAM) facility is unconditionally presented, there is no need to examine each VCPU to determine if it is started/stopped. It can simply be rejected outright with the Invalid Parameter bit. Fixes: b697e435 ("KVM: s390: Support Configuration z/Architecture Mode") Signed-off-by:
-
Claudio Imbrenda authored
Improve make_secure_pte to avoid stalls when the system is heavily overcommitted. This was especially problematic in kvm_s390_pv_unpack, because of the loop over all pages that needed unpacking. Due to the locks being held, it was not possible to simply replace uv_call with uv_call_sched. A more complex approach was needed, in which uv_call is replaced with __uv_call, which does not loop. When the UVC needs to be executed again, -EAGAIN is returned, and the caller (or its caller) will try again. When -EAGAIN is returned, the path is the same as when the page is in writeback (and the writeback check is also performed, which is harmless). Fixes: 214d9bbc ("s390/mm: provide memory management functions for protected KVM guests") Signed-off-by:
-
Claudio Imbrenda authored
When the system is heavily overcommitted, kvm_s390_pv_init_vm might generate stall notifications. Fix this by using uv_call_sched instead of just uv_call. This is ok because we are not holding spinlocks. Signed-off-by:
-
Claudio Imbrenda authored
If kvm_s390_pv_destroy_cpu is called more than once, we risk calling free_page on a random page, since the sidad field is aliased with the gbea, which is not guaranteed to be zero. This can happen, for example, if userspace calls the KVM_PV_DISABLE IOCTL, and it fails, and then userspace calls the same IOCTL again. This scenario is only possible if KVM has some serious bug or if the hardware is broken. The solution is to simply return successfully immediately if the vCPU was already non secure. Signed-off-by:
-
Claudio Imbrenda authored
Add macros to describe the 4 possible CC values returned by the UVC instruction. Signed-off-by:
-
David Hildenbrand authored
We already optimize get_guest_storage_key() to assume that if we don't have a PTE table and don't have a huge page mapped that the storage key is 0. Similarly, optimize reset_guest_reference_bit() to simply do nothing if there is no PTE table and no huge page mapped. Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20210909162248.14969-10-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We already optimize get_guest_storage_key() to assume that if we don't have a PTE table and don't have a huge page mapped that the storage key is 0. Similarly, optimize set_guest_storage_key() to simply do nothing in case the key to set is 0. Signed-off-by:
-
David Hildenbrand authored
pte_map_lock() is sufficient. Signed-off-by:
-
David Hildenbrand authored
We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap"). find_vma() does not check if the address is >= the VMA start address; use vma_lookup() instead. Fixes: 214d9bbc ("s390/mm: provide memory management functions for protected KVM guests") Signed-off-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Link: https://lore.kernel.org/r/20210909162248.14969-6-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
There are multiple things broken about our storage key handling functions: 1. We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap"). gfn_to_hva() will only translate using KVM memory regions, but won't validate the VMA. 2. We should not allocate page tables outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. 3. We don't handle large PUDs that might suddenly appeared inside our page table hierarchy. Don't manually allocate page tables, properly validate that we have VMA and bail out on pud_large(). All callers of page table handling functions, except get_guest_storage_key(), call fixup_user_fault() in case they receive an -EFAULT and retry; this will allocate the necessary page tables if required. To keep get_guest_storage_key() working as expected and not requiring kvm_s390_get_skeys() to call fixup_user_fault() distinguish between "there is simply no page table or huge page yet and the key is assumed to be 0" and "this is a fault to be reported". Although commit 637ff9ef ("s390/mm: Add huge pmd storage key handling") introduced most of the affected code, it was actually already broken before when using get_locked_pte() without any VMA checks. Note: Ever since commit 637ff9ef ("s390/mm: Add huge pmd storage key handling") we can no longer set a guest storage key (for example from QEMU during VM live migration) without actually resolving a fault. Although we would have created most page tables, we would choke on the !pmd_present(), requiring a call to fixup_user_fault(). I would have thought that this is problematic in combination with postcopy life migration ... but nobody noticed and this patch doesn't change the situation. So maybe it's just fine. Fixes: 9fcf93b5 ("KVM: S390: Create helper function get_guest_storage_key") Fixes: 24d5dd02 ("s390/kvm: Provide function for setting the guest storage key") Fixes: a7e19ab5 ("KVM: s390: handle missing storage-key facility") Signed-off-by:
-
David Hildenbrand authored
We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap"). gfn_to_hva() will only translate using KVM memory regions, but won't validate the VMA. Further, we should not allocate page tables outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. Similarly, we have to check if we suddenly find a hugetlbfs VMA, before calling get_locked_pte(). Fixes: 2d42f947 ("s390/kvm: Add PGSTE manipulation functions") Signed-off-by:
-
David Hildenbrand authored
... otherwise we will try unlocking a spinlock that was never locked via a garbage pointer. At the time we reach this code path, we usually successfully looked up a PGSTE already; however, evil user space could have manipulated the VMA layout in the meantime and triggered removal of the page table. Fixes: 1e133ab2 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by:
-
David Hildenbrand authored
We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap"). The pure prescence in our guest_to_host radix tree does not imply that there is a VMA. Further, we should not allocate page tables (via get_locked_pte()) outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. Similarly, we have to check if we suddenly find a hugetlbfs VMA, before calling get_locked_pte(). Note that gmap_discard() is different: zap_page_range()->unmap_single_vma() makes sure to stay within VMA boundaries. Fixes: b31288fa ("s390/kvm: support collaborative memory management") Signed-off-by:
-
- 20 Oct, 2021 2 commits
-
-
Halil Pasic authored
Changing the deliverable mask in __airqs_kick_single_vcpu() is a bug. If one idle vcpu can't take the interrupts we want to deliver, we should look for another vcpu that can, instead of saying that we don't want to deliver these interrupts by clearing the bits from the deliverable_mask. Fixes: 9f30f621 ("KVM: s390: add gib_alert_irq_handler()") Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Reviewed-by:
Michael Mueller <mimu@linux.ibm.com> Reviewed-by:
-
Halil Pasic authored
The idea behind kicked mask is that we should not re-kick a vcpu that is already in the "kick" process, i.e. that was kicked and is is about to be dispatched if certain conditions are met. The problem with the current implementation is, that it assumes the kicked vcpu is going to enter SIE shortly. But under certain circumstances, the vcpu we just kicked will be deemed non-runnable and will remain in wait state. This can happen, if the interrupt(s) this vcpu got kicked to deal with got already cleared (because the interrupts got delivered to another vcpu). In this case kvm_arch_vcpu_runnable() would return false, and the vcpu would remain in kvm_vcpu_block(), but this time with its kicked_mask bit set. So next time around we wouldn't kick the vcpu form __airqs_kick_single_vcpu(), but would assume that we just kicked it. Let us make sure the kicked_mask is cleared before we give up on re-dispatching the vcpu. Fixes: 9f30f621 ("KVM: s390: add gib_alert_irq_handler()") Reported-by:
Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by:
-
- 28 Sep, 2021 1 commit
-
-
Janosch Frank authored
The latest compile changes pointed us to a few instances where we use the kernel documentation style but don't explain all variables or don't adhere to it 100%. It's easy to fix so let's do that. Signed-off-by:
-
- 27 Sep, 2021 1 commit
-
-
Zhenzhong Duan authored
When updating the host's mask for its MSR_IA32_TSX_CTRL user return entry, clear the mask in the found uret MSR instead of vmx->guest_uret_msrs[i]. Modifying guest_uret_msrs directly is completely broken as 'i' does not point at the MSR_IA32_TSX_CTRL entry. In fact, it's guaranteed to be an out-of-bounds accesses as is always set to kvm_nr_uret_msrs in a prior loop. By sheer dumb luck, the fallout is limited to "only" failing to preserve the host's TSX_CTRL_CPUID_CLEAR. The out-of-bounds access is benign as it's guaranteed to clear a bit in a guest MSR value, which are always zero at vCPU creation on both x86-64 and i386. Cc: stable@vger.kernel.org Fixes: 8ea8b8d6 ("KVM: VMX: Use common x86's uret MSR list as the one true list") Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210926015545.281083-1-zhenzhong.duan@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 24 Sep, 2021 3 commits
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 5.15, take #1 - Add missing FORCE target when building the EL2 object - Fix a PMU probe regression on some platforms
-
Oliver Upton authored
Compiling the KVM selftests with clang emits the following warning: >> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized] >> return (unsigned long)xmm0; where xmm0 is accessed via an uninitialized register variable. Indeed, this is a misuse of register variables, which really should only be used for specifying register constraints on variables passed to inline assembly. Rather than attempting to read xmm registers via register variables, just explicitly perform the movq from the desired xmm register. Fixes: 783e9e51 ("kvm: selftests: add API testing infrastructure") Signed-off-by:
Oliver Upton <oupton@google.com> Message-Id: <20210924005147.1122357-1-oupton@google.com> Reviewed-by:
Ricardo Koller <ricarkol@google.com> Signed-off-by:
-
Oliver Upton authored
While x86 does not require any additional setup to use the ucall infrastructure, arm64 needs to set up the MMIO address used to signal a ucall to userspace. rseq_test does not initialize the MMIO address, resulting in the test spinning indefinitely. Fix the issue by calling ucall_init() during setup. Fixes: 61e52f16 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by:
-
- 23 Sep, 2021 7 commits
-
-
Lai Jiangshan authored
There is no user of tlbs_dirty. Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by:
-
Lai Jiangshan authored
If gpte is changed from non-present to present, the guest doesn't need to flush tlb per SDM. So the host must synchronze sp before link it. Otherwise the guest might use a wrong mapping. For example: the guest first changes a level-1 pagetable, and then links its parent to a new place where the original gpte is non-present. Finally the guest can access the remapped area without flushing the tlb. The guest's behavior should be allowed per SDM, but the host kvm mmu makes it wrong. Fixes: 4731d4c7 ("KVM: MMU: out of sync shadow core") Signed-off-by:
-
Lai Jiangshan authored
When kvm->tlbs_dirty > 0, some rmaps might have been deleted without flushing tlb remotely after kvm_sync_page(). If @gfn was writable before and it's rmaps was deleted in kvm_sync_page(), and if the tlb entry is still in a remote running VCPU, the @gfn is not safely protected. To fix the problem, kvm_sync_page() does the remote flush when needed to avoid the problem. Fixes: a4ee1ca4 ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by:
-
Maxim Levitsky authored
These field correspond to features that we don't expose yet to L2 While currently there are no CVE worthy features in this field, if AMD adds more features to this field, that could allow guest escapes similar to CVE-2021-3653 and CVE-2021-3656. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Maxim Levitsky authored
GP SVM errata workaround made the #GP handler always emulate the SVM instructions. However these instructions #GP in case the operand is not 4K aligned, but the workaround code didn't check this and we ended up emulating these instructions anyway. This is only an emulation accuracy check bug as there is no harm for KVM to read/write unaligned vmcb images. Fixes: 82a11e9c ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions") Signed-off-by:
-
Maxim Levitsky authored
Test that if: * L1 disables virtual interrupt masking, and INTR intercept. * L1 setups a virtual interrupt to be injected to L2 and enters L2 with interrupts disabled, thus the virtual interrupt is pending. * Now an external interrupt arrives in L1 and since L1 doesn't intercept it, it should be delivered to L2 when it enables interrupts. to do this L0 (abuses) V_IRQ to setup an interrupt window, and returns to L2. * L2 enables interrupts. This should trigger the interrupt window, injection of the external interrupt and delivery of the virtual interrupt that can now be done. * Test that now L2 gets those interrupts. This is the test that demonstrates the issue that was fixed in the previous patch. Signed-off-by:
-
Maxim Levitsky authored
In svm_clear_vintr we try to restore the virtual interrupt injection that might be pending, but we fail to restore the interrupt vector. Signed-off-by:
-
- 22 Sep, 2021 9 commits
-
-
Fares Mehanna authored
Intel PMU MSRs is in msrs_to_save_all[], so add AMD PMU MSRs to have a consistent behavior between Intel and AMD when using KVM_GET_MSRS, KVM_SET_MSRS or KVM_GET_MSR_INDEX_LIST. We have to add legacy and new MSRs to handle guests running without X86_FEATURE_PERFCTR_CORE. Signed-off-by:
Fares Mehanna <faresx@amazon.de> Message-Id: <20210915133951.22389-1-faresx@amazon.de> Signed-off-by:
-
Maxim Levitsky authored
If L1 had invalid state on VM entry (can happen on SMM transactions when we enter from real mode, straight to nested guest), then after we load 'host' state from VMCS12, the state has to become valid again, but since we load the segment registers with __vmx_set_segment we weren't always updating emulation_required. Update emulation_required explicitly at end of load_vmcs12_host_state. Signed-off-by:
-
Maxim Levitsky authored
It is possible that when non root mode is entered via special entry (!from_vmentry), that is from SMM or from loading the nested state, the L2 state could be invalid in regard to non unrestricted guest mode, but later it can become valid. (for example when RSM emulation restores segment registers from SMRAM) Thus delay the check to VM entry, where we will check this and fail. Signed-off-by:
-
Maxim Levitsky authored
Since no actual VM entry happened, the VM exit information is stale. To avoid this, synthesize an invalid VM guest state VM exit. Suggested-by:
-
Maxim Levitsky authored
Use return statements instead of nested if, and fix error path to free all the maps that were allocated. Suggested-by:
-
Maxim Levitsky authored
Currently the KVM_REQ_GET_NESTED_STATE_PAGES on SVM only reloads PDPTRs, and MSR bitmap, with former not really needed for SMM as SMM exit code reloads them again from SMRAM'S CR3, and later happens to work since MSR bitmap isn't modified while in SMM. Still it is better to be consistient with VMX. Signed-off-by:
-
Maxim Levitsky authored
When exiting SMM, pdpts are loaded again from the guest memory. This fixes a theoretical bug, when exit from SMM triggers entry to the nested guest which re-uses some of the migration code which uses this flag as a workaround for a legacy userspace. Signed-off-by:
-
Maxim Levitsky authored
Otherwise guest entry code might see incorrect L1 state (e.g paging state). Fixes: 37be407b ("KVM: nSVM: Fix L1 state corruption upon return from SMM") Signed-off-by:
-
Vitaly Kuznetsov authored
Windows Server 2022 with Hyper-V role enabled failed to boot on KVM when enlightened VMCS is advertised. Debugging revealed there are two exposed secondary controls it is not happy with: SECONDARY_EXEC_ENABLE_VMFUNC and SECONDARY_EXEC_SHADOW_VMCS. These controls are known to be unsupported, as there are no corresponding fields in eVMCSv1 (see the comment above EVMCS1_UNSUPPORTED_2NDEXEC definition). Previously, commit 31de3d25 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()") introduced the required filtering mechanism for VMX MSRs but for some reason put only known to be problematic (and not full EVMCS1_UNSUPPORTED_* lists) controls there. Note, Windows Server 2022 seems to have gained some sanity check for VMX MSRs: it doesn't even try to launch a guest when there's something it doesn't like, nested_evmcs_check_controls() mechanism can't catch the problem. Let's be bold this time and instead of playing whack-a-mole just filter out all unsupported controls from VMX MSRs. Fixes: 31de3d25 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210907163530.110066-1-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
