- 11 Jul, 2016 20 commits
-
-
Dan Carpenter authored
I moved the sanity check on ecc->size before the allocation so that we don't leak memory on error. Fixes: 05af074a4b73 ('mtd: nand: sunxi: check ecc->size values') Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
Icenowy Zheng authored
The NAND controller on some sun8i chips needs its reset line to be deasserted before they can enter working state. Signed-off-by:
Icenowy Zheng <icenowy@aosc.xyz> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Icenowy Zheng authored
Document the reset lines Signed-off-by:
-
Hauke Mehrtens authored
Instead of using IO_ADDR_W and IO_ADDR_R use an own pointer to the NAND controller memory area. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
This driver needs a special write_buf and read_buf function, because we have to read from a specific address to tell the controller this is a read from the nand controller. Signed-off-by:
-
Hauke Mehrtens authored
Extract the functions to read and write to the register of the NAND flash controller. Signed-off-by:
-
John Crispin authored
The external Bus Unit (EBU) can control different flash devices, but these NAND flash commands have to be atomic and should not be interrupted in between. Lock the EBU from the beginning of the command till the end by moving the lock to the chip select. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
Hauke Mehrtens authored
nand_scan() already resets the NAND flash chip, this driver does not have to call it manually. The xway_reset_chip() functions does the same as the normal NAND reset function. The waiting for the NAND_WAIT_WR_C is done in xway_cmd_ctrl(). Signed-off-by:
-
John Crispin authored
The ->cmd_ctrl() function is adjusting the ->IO_ADDR_W value depending on the command type each time NAND_CTRL_CHANGE is passed. This is not only useless but can lead to an ->IO_ADDR_W corruption. Get rid of this logic and rely on the NAND_CLE and NAND_ALE flags to deduce the iomem address to write the cmd argument to. Signed-off-by:
-
Hauke Mehrtens authored
Instead of hacking this into the plat_nand driver just make this a normal nand driver. Signed-off-by:
-
Hauke Mehrtens authored
This adds some register documentation which should make it easier to understand how this controller works. In addition it makes now use of BIT() macro and adds some more defines. Signed-off-by:
-
Iwo Mergler authored
Support for NAND biterrors test on platforms without raw write While the default test mode relies on raw write (mtd_write_oob) to introduce bit errors into a page, the rewrite test mode doesn't need it. Changed the overwrite test to use normal writes. The default test mode is unaffected and still requires raw write as before. Signed-off-by:
Iwo Mergler <Iwo.Mergler@netcommwireless.com> Signed-off-by:
-
Boris Brezillon authored
Implement ecc->write_subpage() to prevent core code from assigning this hook to nand_write_subpage_hwecc(). This default implementation tries to call ecc->hwctl() which in our case is NULL, thus leading to a NULL pointer dereference. Signed-off-by: -
Boris Brezillon authored
Verify that the ecc->size value is either 512 or 1024 bytes. This should always be the case if this field was assigned to the nand->ecc_step_size_ds value, but can be wrong when the user overloaded this value with the nand-ecc-step-size DT property. Signed-off-by: -
Boris Brezillon authored
Switching to 1k ECC blocks when possible provides better resistance against concentrated bitflips. Say you have those two configurations: 1/ 16bits/512bytes 2/ 32bits/1024bytes Both of them require the same amount of ECC bytes (only true for this specific engine), but the second config allows you to correct the case where most of your bitflips are concentrated in a single 512bytes portion. This fact makes the 1k ECC block size more advantageous than the 512bytes one. Signed-off-by: -
Boris Brezillon authored
The column address passed to the RNDOUT operation was missing the page size offset. Signed-off-by:
-
Jorge Ramirez-Ortiz authored
Add support for mediatek's SDG1 NFC nand controller embedded in SoC 2701 Signed-off-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by:
Xiaolei Li <xiaolei.li@mediatek.com>
-
Jorge Ramirez-Ortiz authored
Documentation support for Smart Device Gen1 type of NAND controllers Signed-off-by:
-
Wei Yongjun authored
In case of error, the function dmaengine_prep_slave_sg() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Fixes: 614049a8 ("mtd: nand: sunxi: add support for DMA assisted operations") Signed-off-by:
-
Kamal Dasu authored
This change provides a fix for controller bug where nand controller could have a possible sticky error after a PIO followed by a DMA read. The fix retries a read if we see a uncorr_ecc after read to detect such sticky errors. The fix applies to only controller version 7.0 and 7.1. Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by:
-
- 13 Jun, 2016 1 commit
-
-
Kamal Dasu authored
Check for erased page bitflips in a page. And if well within threshold return data as all 0xff. Apply sw check for controller version < 7.2. Controller vesion >= 7.2 has hw support. Signed-off-by:
-
- 09 Jun, 2016 1 commit
-
-
Rafał Miłecki authored
I got device with ESMT (Elite Semiconductor Memory Technology Inc) F59L1G81MA flash that was detected as: [ 0.852034] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1 [ 0.858402] nand: Unknown NAND 128MiB 3,3V 8-bit [ 0.863031] nand: 128MiB, SLC, page size: 2048, OOB size: 64 According to the F59L1G81MA datasheet (and Read Id documentation) C8h is a "Maker Code" which should mean ESMT. Add it to fix above "Unknown". Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
- 06 Jun, 2016 2 commits
-
-
Boris Brezillon authored
Document dmas and dma-names properties. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Boris Brezillon authored
The sunxi NAND controller is able to pipeline ECC operations only when operated in DMA mode, which improves a lot NAND throughput while keeping CPU usage low. Signed-off-by:
-
- 03 Jun, 2016 1 commit
-
-
Florian Fainelli authored
The 7.2 controller differs in a few area compared to its predecssor (7.1): - NAND scrambler, which we are not using just yet - higher ECC levels (up to 120 bits) per 1KB data blocks, also not supported yet - up to 128B OOB This patch adds the necessary code to support such a controller generation and updates the Device Tree binding. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
-
- 30 May, 2016 2 commits
-
-
Cooper Jr., Franklin authored
Add additional details to the GPMC NAND documentation to clarify what is needed to enable NAND DMA prefetch. Signed-off-by:
Franklin S Cooper Jr <fcooper@ti.com> Acked-by:
-
Cooper Jr., Franklin authored
Switch from dma_request_channel to allow passing dma channel information from DT rather than hardcoding a value. Also provide a handle to the GPMC's dev so it can be used to parse the DMA channel information within the GPMC's DT node. Performance Numbers via mtd_speedtest now that EDMA based prefetch works: AM335x Performance numbers: DMA CPULOAD Write: 54% Read: 35% page write speed -23% (vs non dma) page read speed -35% (vs non dma) NO DMA (prefetch-polled) CPULOAD Write: 98% Read: 98% AM437x Performance numbers: DMA CPU LOAD Write: 56% Read: 36% page write speed -16% (vs non dma) page read speed -22% (vs non dma) NO DMA (prefetch-polled) CPULOAD Write: 93% Read: 93% Signed-off-by:
-
- 29 May, 2016 3 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
-
- 28 May, 2016 10 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... -
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: -
git://ftp.sciencehorizons.net/linuxLinus Torvalds authored
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac8 ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> -
George Spelvin authored
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: -
George Spelvin authored
Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: -
George Spelvin authored
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.htmlSigned-off-by:
-
George Spelvin authored
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by:
-
