- 23 Nov, 2021 11 commits
-
-
Marek Behún authored
Add support for PHY_INTERFACE_MODE_5GBASER. Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marek Behún authored
Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110 common PHY driver. This is currently only supported via SMC calls to TF-A. Legacy support may be added later, if needed. Signed-off-by:
-
Gerhard Engleder authored
Commit 4dfb9982 ("tsn: Fix build.") fixed compilation with const dev_addr. In tsnep_netdev_set_mac_address() the call of ether_addr_copy() was replaced with dev_set_mac_address(), which calls ndo_set_mac_address(). This results in an endless recursive loop because ndo_set_mac_address is set to tsnep_netdev_set_mac_address. Call eth_hw_addr_set() instead of dev_set_mac_address() in ndo_set_mac_address()/tsnep_netdev_set_mac_address() to copy the address as intended. [ 26.563303] Insufficient stack space to handle exception! [ 26.563312] ESR: 0x96000047 -- DABT (current EL) [ 26.563317] FAR: 0xffff80000a507fc0 [ 26.563320] Task stack: [0xffff80000a508000..0xffff80000a50c000] [ 26.563324] IRQ stack: [0xffff80000a0c0000..0xffff80000a0c4000] [ 26.563327] Overflow stack: [0xffff00007fbaf2b0..0xffff00007fbb02b0] [ 26.563333] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60 [ 26.563340] Hardware name: TSN endpoint (DT) [ 26.563343] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 26.563351] pc : inetdev_event+0x4/0x560 [ 26.563364] lr : raw_notifier_call_chain+0x54/0x78 [ 26.563372] sp : ffff80000a508040 [ 26.563374] x29: ffff80000a508040 x28: ffff00000132b800 x27: 0000000000000000 [ 26.563386] x26: 0000000000000000 x25: ffff800000ea5058 x24: 0904030201020001 [ 26.563396] x23: ffff800000ea5058 x22: ffff80000a5080e0 x21: 0000000000000009 [ 26.563405] x20: 00000000fffffffa x19: ffff80000a009510 x18: 0000000000000000 [ 26.563414] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd1341030 [ 26.563422] x14: ffffffffffffffff x13: 0000000000000020 x12: 0101010101010101 [ 26.563432] x11: 0000000000000020 x10: 0101010101010101 x9 : 7f7f7f7f7f7f7f7f [ 26.563441] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff30677364 x6 : 0000000080808080 [ 26.563450] x5 : 0000000000000000 x4 : ffff800008dee170 x3 : ffff80000a50bd42 [ 26.563459] x2 : ffff80000a5080e0 x1 : 0000000000000009 x0 : ffff80000a0092d0 [ 26.563470] Kernel panic - not syncing: kernel stack overflow [ 26.563474] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60 [ 26.563481] Hardware name: TSN endpoint (DT) [ 26.563484] Call trace: [ 26.563486] dump_backtrace+0x0/0x1b0 [ 26.563497] show_stack+0x18/0x68 [ 26.563504] dump_stack_lvl+0x68/0x84 [ 26.563513] dump_stack+0x18/0x34 [ 26.563519] panic+0x164/0x324 [ 26.563524] nmi_panic+0x64/0x98 [ 26.563533] panic_bad_stack+0x108/0x128 [ 2k6.563539] handle_bad_stack+0x38/0x68 [ 26.563548] __bad_stack+0x88/0x8c [ 26.563553] inetdev_event+0x4/0x560 [ 26.563560] call_netdevice_notifiers_info+0x58/0xa8 [ 26.563569] dev_set_mac_address+0x78/0x110 [ 26.563576] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] [ 26.563591] dev_set_mac_address+0xc4/0x110 [ 26.563599] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] ... [ 26.565444] dev_set_mac_address+0xc4/0x110 [ 26.565452] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] [ 26.565462] dev_set_mac_address+0xc4/0x110 [ 26.565469] dev_set_mac_address_user+0x44/0x68 [ 26.565477] dev_ifsioc+0x30c/0x568 [ 26.565483] dev_ioctl+0x124/0x3f0 [ 26.565489] sock_do_ioctl+0xb4/0xf8 [ 26.565497] sock_ioctl+0x2f4/0x398 [ 26.565503] __arm64_sys_ioctl+0xa8/0xe8 [ 26.565511] invoke_syscall+0x44/0x108 [ 26.565520] el0_svc_common.constprop.3+0x94/0xf8 [ 26.565527] do_el0_svc+0x24/0x88 [ 26.565534] el0_svc+0x20/0x50 [ 26.565541] el0t_64_sync_handler+0x90/0xb8 [ 26.565548] el0t_64_sync+0x180/0x184 [ 26.565556] SMP: stopping secondary CPUs [ 26.565622] Kernel Offset: disabled [ 26.565624] CPU features: 0x0,00004002,00000846 [ 26.565628] Memory Limit: none [ 27.843428] ---[ end Kernel panic - not syncing: kernel stack overflow ]--- Fixes: 4dfb9982 ("tsn: Fix build.") Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by:
-
David S. Miller authored
Ansuel Smith says: ==================== Add mirror and LAG support to qca8k With the continue of adding 'Multiple feature to qca8k' The switch supports mirror mode and LAG. In mirror mode a port is set as mirror and other port are configured to both igress or egress mode. With no port configured for mirror, the mirror port is disabled and reverted to normal port. The switch supports max 4 LAG with 4 different member max. Current supported mode is Hash mode in both L2 or L2+3 mode. There is a problematic implementation for the hash mode where with multiple LAG configured, someone has to remove them to change the hash mode as it's global. When a member of the LAG is disconnected, the traffic is redirected to the other port. Some warning are present from checkpatch but can't really be fixed as it would result in making the regs less readable. (They really did their best with the LAG reg logic and complexity) ==================== Signed-off-by: -
Ansuel Smith authored
Add LAG support to this switch. In Documentation this is described as trunk mode. A max of 4 LAGs are supported and each can support up to 4 port. The current tx mode supported is Hash mode with both L2 and L2+3 mode. When no port are present in the trunk, the trunk is disabled in the switch. When a port is disconnected, the traffic is redirected to the other available port. The hash mode is global and each LAG require to have the same hash mode set. To change the hash mode when multiple LAG are configured, it's required to remove each LAG and set the desired hash mode to the last. An error is printed when it's asked to set a not supported hadh mode. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by:
-
Ansuel Smith authored
The switch supports mirror mode. Only one port can set as mirror port and every other port can set to both ingress and egress mode. The mirror port is disabled and reverted to normal operation once every port is removed from sending packet to it. Signed-off-by:
-
Yajun Deng authored
Add neigh_confirm() for the confirmed member in struct neighbour, it can be called as an independent unit by other functions. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jeremy Kerr authored
This change adds a MCTP Serial transport binding, as defined by DMTF specificiation DSP0253 - "MCTP Serial Transport Binding". This is implemented as a new serial line discipline, and can be attached to arbitrary tty devices. From the Kconfig description: This driver provides an MCTP-over-serial interface, through a serial line-discipline, as defined by DMTF specification "DSP0253 - MCTP Serial Transport Binding". By attaching the ldisc to a serial device, we get a new net device to transport MCTP packets. This allows communication with external MCTP endpoints which use serial as their transport. It can also be used as an easy way to provide MCTP connectivity between virtual machines, by forwarding data between simple virtual serial devices. Say y here if you need to connect to MCTP endpoints over serial. To compile as a module, use m; the module will be called mctp-serial. Once the N_MCTP line discipline is set [using ioctl(TCIOSETD)], we get a new netdev suitable for MCTP communication. The 'mctp' utility[1] provides a simple wrapper for this ioctl, using 'link serial <device>': # mctp link serial /dev/ttyS0 & # mctp link dev lo index 1 address 0x00:00:00:00:00:00 net 1 mtu 65536 up dev mctpserial0 index 5 address 0x(no-addr) net 1 mtu 68 down [1]: https://github.com/CodeConstruct/mctpSigned-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various updates Patch #1 removes deadcode reported by Coverity. Patch #2 adds a shutdown method in the PCI driver to ensure the kexeced kernel starts working with a device that is in a sane state. ==================== Signed-off-by: -
Danielle Ratson authored
On an arm64 platform with the Spectrum ASIC, after loading and executing a new kernel via kexec, the following trace [1] is observed. This seems to be caused by the fact that the device is not properly shutdown before executing the new kernel. Fix this by implementing a shutdown method which mirrors the remove method, as recommended by the kexec maintainer [2][3]. [1] BUG: Bad page state in process devlink pfn:22f73d page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2ffff00000000000() raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount Modules linked in: CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44 Hardware name: Marvell Armada 7040 TX4810M (DT) Call trace: dump_backtrace+0x0/0x1d0 show_stack+0x1c/0x28 dump_stack+0xbc/0x118 bad_page+0xcc/0xf8 check_free_page_bad+0x80/0x88 __free_pages_ok+0x3f8/0x418 __free_pages+0x38/0x60 kmem_freepages+0x200/0x2a8 slab_destroy+0x28/0x68 slabs_destroy+0x60/0x90 ___cache_free+0x1b4/0x358 kfree+0xc0/0x1d0 skb_free_head+0x2c/0x38 skb_release_data+0x110/0x1a0 skb_release_all+0x2c/0x38 consume_skb+0x38/0x130 __dev_kfree_skb_any+0x44/0x50 mlxsw_pci_rdq_fini+0x8c/0xb0 mlxsw_pci_queue_fini.isra.0+0x28/0x58 mlxsw_pci_queue_group_fini+0x58/0x88 mlxsw_pci_aqs_fini+0x2c/0x60 mlxsw_pci_fini+0x34/0x50 mlxsw_core_bus_device_unregister+0x104/0x1d0 mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48 devlink_reload+0x44/0x158 devlink_nl_cmd_reload+0x270/0x290 genl_rcv_msg+0x188/0x2f0 netlink_rcv_skb+0x5c/0x118 genl_rcv+0x3c/0x50 netlink_unicast+0x1bc/0x278 netlink_sendmsg+0x194/0x390 __sys_sendto+0xe0/0x158 __arm64_sys_sendto+0x2c/0x38 el0_svc_common.constprop.0+0x70/0x168 do_el0_svc+0x28/0x88 el0_sync_handler+0x88/0x190 el0_sync+0x140/0x180 [2] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html [3] https://patchwork.kernel.org/project/linux-scsi/patch/20170212214920.28866-1-anton@ozlabs.org/#20116693 Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Danielle Ratson authored
The function idr_for_each_entry() already checks that the next entry in the IDR is not NULL. Therefore, checking that again in every iteration leads to deadcode. Remove the unnecessary check in order to avoid that. Addresses-Coverity: ("Logically dead code") Signed-off-by:
-
- 22 Nov, 2021 29 commits
-
-
David S. Miller authored
Ansuel Smith says: ==================== Multiple cleanup and feature for qca8k This is a reduced version of the old massive series. Refer to the changelog to know what is removed from this. We clean and convert the driver to GENMASK FIELD_PREP to clean multiple use of various naming scheme. (example we have a mix of _MASK, _S _M, and various name) The idea is to ""simplify"" and remove some shift and data handling by using FIELD API. The patch contains various checkpatch warning and are ignored to not create more mess in the header file. (fixing the too long line warning would results in regs definition less readable) We conver the driver to regmap API as ipq40xx SoC is based on the same reg structure and we need to generilize the read/write access to split the driver to commond and specific code. The conversion to regmap is NOT done for the read/write/rmw operation, the function are reworked to use the regmap helper instead. This is done to keep the patch delta low but will come sooner or later when the code will be split. Any new feature will directly use the regmap helper and the reg set/clear and the busy wait function are migrated to regmap helper as the use of these function is low. We also add a minor patch for MIB counter as qca8337 is missing 2 extra counter, support for mdb and ageing settings. v3: - Try to reduce regmap conversion patch v2: - Move regmap init to sw_probe instead of moving switch id check. - Removed LAGs, mirror extra features will come later in another smaller series. - Squash 2 ageing patch - Add more description about the regmap patch - Rework mdb patch to do operation under the same lock ==================== Signed-off-by: -
Ansuel Smith authored
Add support for mdb add/del function. The ARL table is used to insert the rule. The rule will be searched, deleted and reinserted with the port mask updated. The function will check if the rule has to be updated or insert directly with no deletion of the old rule. If every port is removed from the port mask, the rule is removed. The rule is set STATIC in the ARL table (aka it doesn't age) to not be flushed by fast age function. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Ansuel Smith authored
qca8k support setting ageing time in step of 7s. Add support for it and set the max value accepted of 7645m. Documentation talks about support for 10000m but that values doesn't make sense as the value doesn't match the max value in the reg. Signed-off-by:
-
Ansuel Smith authored
The switch supports fast aging by flushing any rule in the ARL table for a specific port. Signed-off-by:
-
Ansuel Smith authored
We are currently missing 2 additionals MIB counter present in QCA833x switch. QC832x switch have 39 MIB counter and QCA833X have 41 MIB counter. Add the additional MIB counter and rework the MIB function to print the correct supported counter from the match_data struct. Signed-off-by:
-
Ansuel Smith authored
Convert any qca8k set/clear/pool to regmap helper and add missing config to regmap_config struct. Read/write/rmw operation are reworked to use the regmap helper internally to keep the delta of this patch low. These additional function will then be dropped when the code split will be proposed. Ipq40xx SoC have the internal switch based on the qca8k regmap but use mmio for read/write/rmw operation instead of mdio. In preparation for the support of this internal switch, convert the driver to regmap API to later split the driver to common and specific code. The overhead introduced by the use of regamp API is marginal as the internal mdio will bypass it by using its direct access and regmap will be used only by configuration functions or fdb access. Signed-off-by:
-
Ansuel Smith authored
In preparation for regmap conversion, move regmap init in the probe function and make it mandatory as any read/write/rmw operation will be converted to regmap API. Signed-off-by:
-
Ansuel Smith authored
Mutex is already init in sw_probe. Remove the extra init in qca8k_setup. Signed-off-by:
-
Ansuel Smith authored
Convert and try to standardize bit fields using GENMASK/FIELD_PREP/FIELD_GET macros. Rework some logic to support the standard macro and tidy things up. No functional change intended. Signed-off-by:
-
Ansuel Smith authored
The very next check for port 0 and 6 already makes sure we don't go out of bounds with the ports_config delay table. Remove the redundant check. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Kees Cook says: ==================== skbuff: Switch structure bounds to struct_group() This is a pair of patches to add struct_group() to struct sk_buff. The first is needed to work around sparse-specific complaints, and is new for v2. The second patch is the same as originally sent as v1. ==================== Signed-off-by: -
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Replace the existing empty member position markers "headers_start" and "headers_end" with a struct_group(). This will allow memcpy() and sizeof() to more easily reason about sizes, and improve readability. "pahole" shows no size nor member offset changes to struct sk_buff. "objdump -d" shows no object code changes (outside of WARNs affected by source line number changes). Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> # drivers/net/wireguard/* Link: https://lore.kernel.org/lkml/20210728035006.GD35706@embeddedorSigned-off-by:
-
Kees Cook authored
In preparation for using the struct_group() macro in struct sk_buff, move the conditional preprocessor directives out of the region of struct sk_buff that will be enclosed by struct_group(). While GCC and Clang are happy with conditional preprocessor directives here, sparse is not, even under -Wno-directive-within-macro[1], as would be seen under a C=1 build: net/core/filter.c: note: in included file (through include/linux/netlink.h, include/linux/sock_diag.h): ./include/linux/skbuff.h:820:1: warning: directive in macro's argument list ./include/linux/skbuff.h:822:1: warning: directive in macro's argument list ./include/linux/skbuff.h:846:1: warning: directive in macro's argument list ./include/linux/skbuff.h:848:1: warning: directive in macro's argument list Additionally remove empty macro argument definitions and usage. "objdump -d" shows no object code differences. [1] https://www.spinics.net/lists/linux-sparse/msg10857.htmlSigned-off-by:
-
Antoine Tenart authored
When checking an address is located in a global data section also check for the .bss section as global variables initialized to 0 can be in there (-fzero-initialized-in-bss). This was found when looking at ensure_safe_net_sysctl which was failing to detect non-init sysctl pointing to a global data section when the data was in the .bss section. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Yajun Deng authored
proc_create_net() and remove_proc_entry() already contain the case whether to define CONFIG_PROC_FS, so remove #ifdef CONFIG_PROC_FS. Signed-off-by:
-
Christophe JAILLET authored
'send_section_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. While at it, change an '== NULL' test into a '!'. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
'cid_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Also change some 'memset()' into 'bitmap_zero()' to keep consistency. This is also much less verbose. Signed-off-by:
-
Christophe JAILLET authored
The 'mask' bitmap is local to this function. So the non-atomic '__set_bit()' can be used to save a few cycles. Signed-off-by:
-
Christophe JAILLET authored
s/cold/could/ Signed-off-by:
Devesh Sharma <devesh.s.sharma@oracle.com> Signed-off-by:
-
Yacov Simhony authored
There are three boolean variable which were not initialized and later being used in the code. Signed-off-by:
Yacov Simhony <ysimhony@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
pcmcia_get_mac_from_cis is only called from networking and recent changes made it call dev_addr_mod() which is itself only defined if NET. Reported-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Due to const dev_addr changes. Signed-off-by: -
M Chetan Kumar authored
This patch brings in support for device trace collection. It implements relayfs interface for pushing device trace from kernel space to user space. Driver gets the debugfs base directory associated to WWAN Device and creates trace_control and trace debugfs for device tracing. Both trace_control & trace debugfs are created under /sys/kernel/debug/wwan/wwan0/. In order to collect device trace on trace0 interface, user need to write 1 to trace_ctl interface. Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
M Chetan Kumar authored
This patch set brings in a common debugfs base directory i.e. /sys/kernel/debugfs/wwan/ in WWAN Subsystem for a WWAN device instance. So that it avoids driver polluting debugfs root with unrelated directories & possible name collusion. Having a common debugfs base directory for WWAN drivers eases user to match control devices with debugfs entries. WWAN Subsystem creates dentry (/sys/kernel/debugfs/wwan) on module load & removes dentry on module unload. When driver registers a new wwan device, dentry (wwanX) is created for WWAN device instance & on driver unregister dentry is removed. New API is introduced to return the wwan device instance dentry so that driver can create debugfs entries under it. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Jakub Kicinski authored
Argument of a helper is missing a const. Reported-by:
-
Haiyang Zhang authored
Add support of XDP for the MANA driver. Supported XDP actions: XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED XDP actions not yet supported: XDP_REDIRECT Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
David S. Miller authored
Gerhard Engleder says: ==================== TSN endpoint Ethernet MAC driver This series adds a driver for my FPGA based TSN endpoint Ethernet MAC. It also includes the device tree binding. The device is designed as Ethernet MAC for TSN networks. It will be used in PLCs with real-time requirements up to isochronous communication with protocols like OPC UA Pub/Sub. v3: - set MAC mode based on PHY information (Andrew Lunn) - remove/postpone loopback mode interface (Andrew Lunn) - add suppress_preamble node support (Andrew Lunn) - add mdio timeout (Andrew Lunn) - no need to call phy_start_aneg (Andrew Lunn) - remove unreachable code (Andrew Lunn) - move 'struct napi_struct' closer to queues (Vinicius Costa Gomes) - remove unused variable (kernel test robot) - switch from mdio interrupt to polling - mdio register without PHY address flag - thread safe interrupt enable register - add PTP_1588_CLOCK_OPTIONAL dependency to Kconfig - introduce dmadev for DMA allocation - mdiobus for platforms without device tree - prepare MAC address support for platforms without device tree - add missing interrupt disable to probe error path v2: - add C45 check (Andrew Lunn) - forward phy_connect_direct() return value (Andrew Lunn) - use phy_remove_link_mode() (Andrew Lunn) - do not touch PHY directly, use PHY subsystem (Andrew Lunn) - remove management data lock (Andrew Lunn) - use phy_loopback (Andrew Lunn) - remove GMII2RGMII handling, use xgmiitorgmii (Andrew Lunn) - remove char device for direct TX/RX queue access (Andrew Lunn) - mdio node for mdiobus (Rob Herring) - simplify compatible node (Rob Herring) - limit number of items of reg and interrupts nodes (Rob Herring) - restrict phy-connection-type node (Rob Herring) - reference to mdio.yaml under mdio node (Rob Herring) - remove device tree (Michal Simek) - fix %llx warning (kernel test robot) - fix unused tmp variable warning (kernel test robot) - add missing of_node_put() for of_parse_phandle() - use devm_mdiobus_alloc() - simplify mdiobus read/write - reduce required nodes - ethtool priv flags interface for loopback - add missing static for some functions - remove obsolete hardware defines ==================== Signed-off-by: -
Gerhard Engleder authored
The TSN endpoint Ethernet MAC is a FPGA based network device for real-time communication. It is integrated as Ethernet controller with ethtool and PTP support. For real-time communcation TC_SETUP_QDISC_TAPRIO is supported. Signed-off-by:
-
Gerhard Engleder authored
The TSN endpoint Ethernet MAC is a FPGA based network device for real-time communication. It is integrated as normal Ethernet controller with ethernet-controller.yaml and mdio.yaml. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
