Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-24-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-23-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-22-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-21-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-20-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-19-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-18-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-17-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all this device appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Frank Li <Frank.li@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-16-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform devices.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-15-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-14-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the appropriate platform devices.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Atish Patra <atishp@atishpatra.org>
CC: Anup Patel <anup@brainfault.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-13-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Robert Richter <rric@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-12-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-11-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the hardware related struct device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-10-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-9-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-8-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-7-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the PCI device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-6-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-5-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-4-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Having assigned a parent to the device, the suggested path is
no longer valid.  As /sys/bus/event_sources based path is also
provided, simply drop mention of alternative.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-3-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the PCI device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-2-Jonathan.Cameron@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Currently we're using "sbfx" to extract the PMUVer from ID_AA64DFR0_EL1
and skip the init/reset if no PMU present when the extracted PMUVer is
negative or is zero. However for PMUv3p8 the PMUVer will be 0b1000 and
PMUVer extracted by "sbfx" will always be negative and we'll skip the
init/reset in __init_el2_debug/reset_pmuserenr_el0 unexpectedly.

So this patch use "ubfx" instead of "sbfx" to extract the PMUVer. If
the PMUVer is implementation defined (0b1111) or not implemented(0b0000)
then skip the reset/init. Previously we'll also skip the init/reset
if the PMUVer is higher than the version we known (currently PMUv3p9),
with this patch we'll only skip if the PMU is not implemented or
implementation defined. This keeps consistence with how we probe
the PMU in the driver with pmuv3_implemented().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240411123030.7201-1-yangyicong@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Now that perf supports giving the PMU device a parent, we can use our
platform device to make the relationship between CMN instances and PMU
IDs trivially discoverable, from either nominal direction:

root@crazy-taxi:~# ls /sys/devices/platform/ARMHC600:00 | grep cmn
arm_cmn_0
root@crazy-taxi:~# realpath /sys/bus/event_source/devices/arm_cmn_0/..
/sys/devices/platform/ARMHC600:00
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/25d4428df1ddad966c74a3ed60171cd3ca6c8b66.1712682917.git.robin.murphy@arm.comSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-11-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-10-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-9-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-8-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-7-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-6-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-5-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-4-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-3-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

In some cases, it's useful to be able to select a random cpu from the
intersection of two masks, excluding a particular CPU.

For example, in some systems an uncore PMU is shared by a subset of
CPUs, and management of this PMU is assigned to some arbitrary CPU in
this set. Whenever the management CPU is hotplugged out, we wish to
migrate responsibility to another arbitrary CPU which is both in this
set and online.

Today we can use cpumask_any_and() to select an arbitrary CPU in the
intersection of two masks. We can also use cpumask_any_but() to select
any arbitrary cpu in a mask excluding, a particular CPU.

To do both, we either need to use a temporary cpumask, which is
wasteful, or use some lower-level cpumask helpers, which can be unclear.

This patch adds a new cpumask_any_and_but() to cater for these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-2-dawei.li@shingroup.cnSigned-off-by: Will Deacon <will@kernel.org>

Replace open coded acpi_match_acpi_device() in get_tx2_pmu_type().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404170016.2466898-1-andriy.shevchenko@linux.intel.comSigned-off-by: Will Deacon <will@kernel.org>

This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)

Remove sentinel from sbi_pmu_sysctl_table
Signed-off-by: Joel Granados <j.granados@samsung.com>
Link: https://lore.kernel.org/r/20240328-jag-sysctl_remset_misc-v1-7-47c1463b3af2@samsung.comSigned-off-by: Will Deacon <will@kernel.org>

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation