- 27 Mar, 2019 28 commits
-
-
Enric Balletbo i Serra authored
commit 5fb5caee upstream. Before this patch the enable signal was set before the PWM signal and vice-versa on power off. This sequence is wrong, at least, it is on the different panels datasheets that I checked, so I inverted the sequence to follow the specs. For reference the following panels have the mentioned sequence: - N133HSE-EA1 (Innolux) - N116BGE (Innolux) - N156BGE-L21 (Innolux) - B101EAN0 (Auo) - B101AW03 (Auo) - LTN101NT05 (Samsung) - CLAA101WA01A (Chunghwa) Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Acked-by:
Jingoo Han <jingoohan1@gmail.com> Acked-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baolin Wang authored
commit 36d46cdb upstream. If we convert one large time values to rtc_time, in the original formula 'days * 86400' can be overflowed in 'unsigned int' type to make the formula get one incorrect remain seconds value. Thus we can use div_s64_rem() function to avoid this situation. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
kehuanlin authored
commit 83dc7e3d upstream. Since the command type of UTRD in UFS 2.1 specification is the same with UFS 2.0. And it assumes the future UFS specification will follow the same definition. Signed-off-by:
kehuanlin <kehuanlin@pinecone.net> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Andrey Konovalov authored
commit 32fd87b3 upstream. When cleaning up the configurations, make sure we only free the number of configurations and interfaces that we could have allocated. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 3f329570 upstream. The current int_sqrt() computation is sub-optimal for the case of small @x. Which is the interesting case when we're going to do cumulative distribution functions on idle times, which we assume to be a random variable, where the target residency of the deepest idle state gives an upper bound on the variable (5e6ns on recent Intel chips). In the case of small @x, the compute loop: while (m != 0) { b = y + m; y >>= 1; if (x >= b) { x -= b; y += m; } m >>= 2; } can be reduced to: while (m > x) m >>= 2; Because y==0, b==m and until x>=m y will remain 0. And while this is computationally equivalent, it runs much faster because there's less code, in particular less branches. cycles: branches: branch-misses: OLD: hot: 45.109444 +- 0.044117 44.333392 +- 0.002254 0.018723 +- 0.000593 cold: 187.737379 +- 0.156678 44.333407 +- 0.002254 6.272844 +- 0.004305 PRE: hot: 67.937492 +- 0.064124 66.999535 +- 0.000488 0.066720 +- 0.001113 cold: 232.004379 +- 0.332811 66.999527 +- 0.000488 6.914634 +- 0.006568 POST: hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681 cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219 Averages computed over all values <128k using a LFSR to generate order. Cold numbers have a LFSR based branch trace buffer 'confuser' ran between each int_sqrt() invocation. Link: http://lkml.kernel.org/r/20171020164644.876503355@infradead.org Fixes: 30493cc9 ("lib/int_sqrt.c: optimize square root algorithm") Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by:
Anshul Garg <aksgarg1989@gmail.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joe Perches <joe@perches.com> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Davidson <md@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Lanqing Liu authored
commit 43507825 upstream. On Spreadtrum's serial device, nearly all of interrupts would be cleared by hardware except timeout interrupt. This patch removed the operation of clearing all interrupt in irq handler, instead added an if statement to check if the timeout interrupt is supposed to be cleared. Wrongly clearing timeout interrupt would lead to uart data stay in rx fifo, that means the driver cannot read them out anymore. Signed-off-by:
Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by:
-
Qiao Zhou authored
commit 6f44a0ba upstream. In current die(), the irq is disabled for __die() handle, not including the possible panic() handling. Since the log in __die() can take several hundreds ms, new irq might come and interrupt current die(). If the process calling die() holds some critical resource, and some other process scheduled later also needs it, then it would deadlock. The first panic will not be executed. So here disable irq for the whole flow of die(). Signed-off-by:
Qiao Zhou <qiaozhou@asrmicro.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Al Viro authored
commit 81be24d2 upstream. It's not hard to trigger a bunch of d_invalidate() on the same dentry in parallel. They end up fighting each other - any dentry picked for removal by one will be skipped by the rest and we'll go for the next iteration through the entire subtree, even if everything is being skipped. Morevoer, we immediately go back to scanning the subtree. The only thing we really need is to dissolve all mounts in the subtree and as soon as we've nothing left to do, we can just unhash the dentry and bugger off. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Wei Qiao authored
commit e1dc9b08 upstream. SPRD_TIMEOUT was 256, which is too small to wait until the status switched to workable in a while loop, so that the earlycon could not work correctly. Signed-off-by:
Wei Qiao <wei.qiao@spreadtrum.com> Signed-off-by:
-
Eric Dumazet authored
commit 5ea8ea2c upstream. Per listen(fd, backlog) rules, there is really no point accepting a SYN, sending a SYNACK, and dropping the following ACK packet if accept queue is full, because application is not draining accept queue fast enough. This behavior is fooling TCP clients that believe they established a flow, while there is nothing at server side. They might then send about 10 MSS (if using IW10) that will be dropped anyway while server is under stress. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hui Wang authored
commit b5a236c1 upstream. Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 98081ca6 upstream. Currently we deal with single codec and suspend codec callbacks for all S3, S4 and runtime PM handling. But it turned out that we want distinguish the call patterns sometimes, e.g. for applying some init sequence only at probing and restoring from hibernate. This patch slightly modifies the common PM callbacks for HD-audio codec and stores the currently processed PM event in power_state of the codec's device.power field, which is currently unused. The codec callback can take a look at this event value and judges which purpose it's being called. Signed-off-by:
-
Waiman Long authored
commit 71492580 upstream. Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Debugged-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Myungho Jung authored
commit e20a2e9c upstream. When releasing socket, it is possible to enter hci_sock_release() and hci_sock_dev_event(HCI_DEV_UNREG) at the same time in different thread. The reference count of hdev should be decremented only once from one of them but if storing hdev to local variable in hci_sock_release() before detached from socket and setting to NULL in hci_sock_dev_event(), hci_dev_put(hdev) is unexpectedly called twice. This is resolved by referencing hdev from socket after bt_sock_unlink() in hci_sock_release(). Reported-by: syzbot+fdc00003f4efff43bc5b@syzkaller.appspotmail.com Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Hans Verkuil authored
commit f45f3f75 upstream. Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
zhangyi (F) authored
commit 674a2b27 upstream. All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by:
-
Lukas Czerner authored
commit 372a03e0 upstream. Ext4 needs to serialize unaligned direct AIO because the zeroing of partial blocks of two competing unaligned AIOs can result in data corruption. However it decides not to serialize if the potentially unaligned aio is past i_size with the rationale that no pending writes are possible past i_size. Unfortunately if the i_size is not block aligned and the second unaligned write lands past i_size, but still into the same block, it has the potential of corrupting the previous unaligned write to the same block. This is (very simplified) reproducer from Frank // 41472 = (10 * 4096) + 512 // 37376 = 41472 - 4096 ftruncate(fd, 41472); io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376); io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472); io_submit(io_ctx, 1, &iocbs[1]); io_submit(io_ctx, 1, &iocbs[2]); io_getevents(io_ctx, 2, 2, events, NULL); Without this patch the 512B range from 40960 up to the start of the second unaligned write (41472) is going to be zeroed overwriting the data written by the first write. This is a data corruption. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 With this patch the data corruption is avoided because we will recognize the unaligned_aio and wait for the unwritten extent conversion. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 * 0000b200 Reported-by:
Frank Sorenson <fsorenso@redhat.com> Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Jiufei Xue authored
commit fa30dde3 upstream. We see the following NULL pointer dereference while running xfstests generic/475: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10 RIP: 0010:ext4_do_update_inode+0x4ec/0x760 ... Call Trace: ? jbd2_journal_get_write_access+0x42/0x50 ? __ext4_journal_get_write_access+0x2c/0x70 ? ext4_truncate+0x186/0x3f0 ext4_mark_iloc_dirty+0x61/0x80 ext4_mark_inode_dirty+0x62/0x1b0 ext4_truncate+0x186/0x3f0 ? unmap_mapping_pages+0x56/0x100 ext4_setattr+0x817/0x8b0 notify_change+0x1df/0x430 do_truncate+0x5e/0x90 ? generic_permission+0x12b/0x1a0 This is triggered because the NULL pointer handle->h_transaction was dereferenced in function ext4_update_inode_fsync_trans(). I found that the h_transaction was set to NULL in jbd2__journal_restart but failed to attached to a new transaction while the journal is aborted. Fix this by checking the handle before updating the inode. Fixes: b436b9be ("ext4: Wait for proper transaction commit on fsync") Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: stable@kernel.org Signed-off-by:
-
Josh Poimboeuf authored
commit 0c671812 upstream. Objtool uses over 512k of stack, thanks to the hash table embedded in the objtool_file struct. This causes an unnecessarily large stack allocation and breaks users with low stack limits. Move the struct off the stack. Fixes: 042ba73f ("objtool: Add several performance improvements") Reported-by:
Vassili Karpov <moosotc@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.comSigned-off-by:
-
Chen Jie authored
commit 5a07168d upstream. The futex code requires that the user space addresses of futexes are 32bit aligned. sys_futex() checks this in futex_get_keys() but the robust list code has no alignment check in place. As a consequence the kernel crashes on architectures with strict alignment requirements in handle_futex_death() when trying to cmpxchg() on an unaligned futex address which was retrieved from the robust list. [ tglx: Rewrote changelog, proper sizeof() based alignement check and add comment ] Fixes: 0771dfef ("[PATCH] lightweight robust futexes: core") Signed-off-by:
Chen Jie <chenjie6@huawei.com> Signed-off-by:
-
Archer Yan authored
commit 47c25036 upstream. Insert Branch instruction instead of NOP to make sure assembler don't patch code in forbidden slot. In jump label function, it might be possible to patch Control Transfer Instructions(CTIs) into forbidden slot, which will generate Reserved Instruction exception in MIPS release 6. Signed-off-by:
Archer Yan <ayan@wavecomp.com> Reviewed-by:
Paul Burton <paul.burton@mips.com> [paul.burton@mips.com: - Add MIPS prefix to subject. - Mark for stable from v4.0, which introduced r6 support, onwards.] Signed-off-by:
-
Yasha Cherikovsky authored
commit 3f0a53bc upstream. This fixes booting with the combination of CONFIG_RELOCATABLE=y and CONFIG_MIPS_ELF_APPENDED_DTB=y. Sections that appear after the relocation table are not relocated on system boot (except .bss, which has special handling). With CONFIG_MIPS_ELF_APPENDED_DTB, the dtb is part of the vmlinux ELF, so it must be relocated together with everything else. Fixes: 069fd766 ("MIPS: Reserve space for relocation table") Signed-off-by:
Yasha Cherikovsky <yasha.che3@gmail.com> Signed-off-by:
-
Yifeng Li authored
commit 5f5f67da upstream. Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in cascade_irqaction, MFGPT interrupts will be masked in suspend mode, and the machine would be unable to resume once suspended. Previously, MIPS IRQs were not disabled properly, so the original code appeared to work. Commit a3e6c1ef ("MIPS: IRQ: Fix disable_irq on CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to cascade_irqaction. This commit is functionally identical to 0add9c2f ("MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot to apply the same fix to Loongson2. Signed-off-by:
Yifeng Li <tomli@tomli.me> Signed-off-by:
-
Jan Kara authored
commit d3ca4651 upstream. When truncate(2) hits IO error when reading indirect extent block the code just bugs with: kernel BUG at linux-4.15.0/fs/udf/truncate.c:249! ... Fix the problem by bailing out cleanly in case of IO error. CC: stable@vger.kernel.org Reported-by:
jean-luc malet <jeanluc.malet@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit bb229bbb upstream. Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: stable@vger.kernel.org Fixes: 6305a3b4 ("libceph: support for blacklisting clients") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jason Dillaman <dillaman@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 4e50ce03 upstream. Take into account that sg->offset can be bigger than PAGE_SIZE when setting segment sg->dma_address. Otherwise sg->dma_address will point at diffrent page, what makes DMA not possible with erros like this: xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020] Additinally with wrong sg->dma_address unmap_sg will free wrong pages, what what can cause crashes like this: Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1 Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000() Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000 Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E) Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E) Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1 Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018 Feb 28 19:27:45 kernel: Call Trace: Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80 Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2 Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0 Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180 Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20 Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60 Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340 Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30 Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100 Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180 Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250 Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0 Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290 Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30 Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170 Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: stable@vger.kernel.org Reported-and-tested-by:
Jan Viktorin <jan.viktorin@gmail.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Fixes: 80187fd3 ('iommu/amd: Optimize map_sg and unmap_sg') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
commit c2d31155 upstream. When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <stable@vger.kernel.org> Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Arnd Bergmann authored
commit e60a582b upstream. clang points out several instances of mismatched types in this drivers, all coming from a single declaration: drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion] direction = DMA_DEV_TO_MEM; ~ ^~~~~~~~~~~~~~ drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion] tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, The behavior is correct, so this must be a simply typo from dma_data_direction and dma_transfer_direction being similarly named types with a similar purpose. Fixes: 6464b714 ("mmc: pxamci: switch over to dmaengine use") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
- 23 Mar, 2019 12 commits
-
-
Greg Kroah-Hartman authored
-
Wanpeng Li authored
commit bbeac283 upstream. Reported by syzkaller: The kvm-intel.unrestricted_guest=0 WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] CPU: 5 PID: 1014 Comm: warn_test Tainted: G W OE 4.13.0-rc3+ #8 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] Call Trace: ? put_pid+0x3a/0x50 ? rcu_read_lock_sched_held+0x79/0x80 ? kmem_cache_free+0x2f2/0x350 kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 The syszkaller folks reported a residual mmio emulation request to userspace due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs several threads to launch the same vCPU, the thread which lauch this vCPU after the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will trigger the warning. #define _GNU_SOURCE #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> #include <linux/kvm.h> #include <stdio.h> int kvmcpu; struct kvm_run *run; void* thr(void* arg) { int res; res = ioctl(kvmcpu, KVM_RUN, 0); printf("ret1=%d exit_reason=%d suberror=%d\n", res, run->exit_reason, run->internal.suberror); return 0; } void test() { int i, kvm, kvmvm; pthread_t th[4]; kvm = open("/dev/kvm", O_RDWR); kvmvm = ioctl(kvm, KVM_CREATE_VM, 0); kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0); run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0); srand(getpid()); for (i = 0; i < 4; i++) { pthread_create(&th[i], 0, thr, 0); usleep(rand() % 10000); } for (i = 0; i < 4; i++) pthread_join(th[i], 0); } int main() { for (;;) { int pid = fork(); if (pid < 0) exit(1); if (pid == 0) { test(); exit(0); } int status; while (waitpid(pid, &status, __WALL) != pid) {} } return 0; } This patch fixes it by resetting the vcpu->mmio_needed once we receive the triple fault to avoid the residue. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Sean Christopherson authored
commit 34333cc6 upstream. Regarding segments with a limit==0xffffffff, the SDM officially states: When the effective limit is FFFFFFFFH (4 GBytes), these accesses may or may not cause the indicated exceptions. Behavior is implementation-specific and may vary from one execution to another. In practice, all CPUs that support VMX ignore limit checks for "flat segments", i.e. an expand-up data or code segment with base=0 and limit=0xffffffff. This is subtly different than wrapping the effective address calculation based on the address size, as the flat segment behavior also applies to accesses that would wrap the 4g boundary, e.g. a 4-byte access starting at 0xffffffff will access linear addresses 0xffffffff, 0x0, 0x1 and 0x2. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
commit 946c522b upstream. The VMCS.EXIT_QUALIFCATION field reports the displacements of memory operands for various instructions, including VMX instructions, as a naturally sized unsigned value, but masks the value by the addr size, e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is reported as 0xffffffd8 for a 32-bit address size. Despite some weird wording regarding sign extension, the SDM explicitly states that bits beyond the instructions address size are undefined: In all cases, bits of this field beyond the instructionâ€
™ s address size are undefined. Failure to sign extend the displacement results in KVM incorrectly treating a negative displacement as a large positive displacement when the address size of the VMX instruction is smaller than KVM's native size, e.g. a 32-bit address size on a 64-bit KVM. The very original decoding, added by commit 064aea77 ("KVM: nVMX: Decoding memory operands of VMX instructions"), sort of modeled sign extension by truncating the final virtual/linear address for a 32-bit address size. I.e. it messed up the effective address but made it work by adjusting the final address. When segmentation checks were added, the truncation logic was kept as-is and no sign extension logic was introduced. In other words, it kept calculating the wrong effective address while mostly generating the correct virtual/linear address. As the effective address is what's used in the segment limit checks, this results in KVM incorreclty injecting #GP/#SS faults due to non-existent segment violations when a nested VMM uses negative displacements with an address size smaller than KVM's native address size. Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in KVM using 0x100000fd8 as the effective address when checking for a segment limit violation. This causes a 100% failure rate when running a 32-bit KVM build as L1 on top of a 64-bit KVM L0. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by: -
Gustavo A. R. Silva authored
commit cc5034a5 upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00 ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sakari Ailus authored
commit 9dd0627d upstream. The UVC video driver converts the timestamp from hardware specific unit to one known by the kernel at the time when the buffer is dequeued. This is fine in general, but the streamoff operation consists of the following steps (among other things): 1. uvc_video_clock_cleanup --- the hardware clock sample array is released and the pointer to the array is set to NULL, 2. buffers in active state are returned to the user and 3. buf_finish callback is called on buffers that are prepared. buf_finish includes calling uvc_video_clock_update that accesses the hardware clock sample array. The above is serialised by a queue specific mutex. Address the problem by skipping the clock conversion if the hardware clock sample array is already released. Fixes: 9c0863b1 ("[media] vb2: call buf_finish from __queue_cancel") Reported-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Zhang, Jun authored
commit 1d1f898d upstream. The rcu_gp_kthread_wake() function is invoked when it might be necessary to wake the RCU grace-period kthread. Because self-wakeups are normally a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from this kthread, it naturally refuses to do the wakeup. Unfortunately, natural though it might be, this heuristic fails when rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler that interrupted the grace-period kthread just after the final check of the wait-event condition but just before the schedule() call. In this case, a wakeup is required, even though the call to rcu_gp_kthread_wake() is within the RCU grace-period kthread's context. Failing to provide this wakeup can result in grace periods failing to start, which in turn results in out-of-memory conditions. This race window is quite narrow, but it actually did happen during real testing. It would of course need to be fixed even if it was strictly theoretical in nature. This patch does not Cc stable because it does not apply cleanly to earlier kernel versions. Fixes: 48a7639c ("rcu: Make callers awaken grace-period kthread") Reported-by:
"He, Bo" <bo.he@intel.com> Co-developed-by:
"Zhang, Jun" <jun.zhang@intel.com> Co-developed-by:
"xiao, jin" <jin.xiao@intel.com> Co-developed-by:
Bai, Jie A <jie.a.bai@intel.com> Signed-off: "Zhang, Jun" <jun.zhang@intel.com> Signed-off: "He, Bo" <bo.he@intel.com> Signed-off: "xiao, jin" <jin.xiao@intel.com> Signed-off: Bai, Jie A <jie.a.bai@intel.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.comSigned-off-by:
-
Aditya Pakki authored
commit e406f12d upstream. mddev->sync_thread can be set to NULL on kzalloc failure downstream. The patch checks for such a scenario and frees allocated resources. Committer node: Added similar fix to raid5.c, as suggested by Guoqing. Cc: stable@vger.kernel.org # v3.16+ Acked-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Adrian Hunter authored
commit 07633387 upstream. When TSC is not available, "timeless" decoding is used but a divide by zero occurs if perf_time_to_tsc() is called. Ensure the divisor is not zero. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lkml.kernel.org/n/tip-1i4j0wqoc8vlbkcizqqxpsf4@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 5a99d99e upstream. Auxtrace records might have up to 7 bytes of padding appended. Adjust the overlap accordingly. Signed-off-by:
-
Adrian Hunter authored
commit c3fcadf0 upstream. Define auxtrace record alignment so that it can be referenced elsewhere. Note this is preparation for patch "perf intel-pt: Fix overlap calculation for padding" Signed-off-by:
-
Adrian Hunter authored
commit 03997612 upstream. CYC packet timestamp calculation depends upon CBR which was being cleared upon overflow (OVF). That can cause errors due to failing to synchronize with sideband events. Even if a CBR change has been lost, the old CBR is still a better estimate than zero. So remove the clearing of CBR. Signed-off-by:
-
