- 12 Dec, 2013 26 commits
-
-
Tom Lendacky authored
commit 389a5390 upstream. Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is enabled. Use sg_chain_ptr instead of sg_page on a chain entry. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Cox authored
commit 9aa5b018 upstream. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772Signed-off-by:
Alan Cox <alan@linux.intel.com> Reported-by:
Leho Kraav <leho@kraav.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Cluytens authored
commit 3b59d16c upstream. Signed-off-by:
David Cluytens <david.cluytens@gmail.com> Signed-off-by:
-
Colin Leitner authored
commit 711fbdfb upstream. This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by:
Colin Leitner <colin.leitner@gmail.com> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Colin Leitner authored
commit 78692cc3 upstream. This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by:
-
Colin Leitner authored
commit a3132499 upstream. This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a value of 0 and the CSIZE setting has been skipped altogether by the enclosing if. Tested on 3.11.6 and the scope shows the correct output after the fix has been applied. Tagged to be added to stable, because it fixes a user visible driver bug and is simple enough to backport easily. Signed-off-by:
-
Seth Heasley authored
commit c2db409c upstream. This patch adds the PCU SMBus DeviceID for the Intel Avoton SOC. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Reviewed-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: "Ong, Boon Leong" <boon.leong.ong@intel.com> Signed-off-by:
-
Seth Heasley authored
commit 29e674dd upstream. This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Cc: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
-
James Ralston authored
commit 77b12bc9 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Sergei Trofimovich authored
commit fdfa4c95 upstream. arch/um/os-Linux/start_up.c: In function 'check_coredump_limit': arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration] Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> CC: Jeff Dike <jdike@addtoit.com> CC: Richard Weinberger <richard@nod.at> CC: Al Viro <viro@zeniv.linux.org.uk> CC: user-mode-linux-devel@lists.sourceforge.net CC: user-mode-linux-user@lists.sourceforge.net CC: linux-kernel@vger.kernel.org Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Tom Gundersen authored
commit dfaaed08 upstream. Moust (if not all) modern software, including X, uses /dev/eventX rather than the legacy /dev/mouseX devices. It therefore makes sense for general-purpose (distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y requirement. Signed-off-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tom Gundersen authored
commit bcd26230 upstream. There is plenty of consumer hardware (e.g., mac books) that does not use AT keyboards or PS/2 mice. It therefore makes sense for distro kernels to build the related drivers as modules to avoid loading them on hardware that does not need them. As such, these options should no longer be protected by EXPERT. Moreover, building these drivers as modules gets rid of the following ugly error during boot: [ 2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.439537] i8042: No controller found Signed-off-by:
-
Shawn Landden authored
commit d3f7d56a upstream. Commit 35f9c09f (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reported-and-tested-by:
Shawn Landden <shawnlandden@gmail.com> Original-patch: Richard Weinberger <richard@nod.at> Signed-off-by:
Shawn Landden <shawn@churchofgit.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Laxman Dewangan authored
commit ac01810c upstream. When the system enters suspend, it disables all interrupts in suspend_device_irqs(), including the interrupts marked EARLY_RESUME. On the resume side things are different. The EARLY_RESUME interrupts are reenabled in sys_core_ops->resume and the non EARLY_RESUME interrupts are reenabled in the normal system resume path. When suspend_noirq() failed or suspend is aborted for any other reason, we might omit the resume side call to sys_core_ops->resume() and therefor the interrupts marked EARLY_RESUME are not reenabled and stay disabled forever. To solve this, enable all irqs unconditionally in irq_resume() regardless whether interrupts marked EARLY_RESUMEhave been already enabled or not. This might try to reenable already enabled interrupts in the non failure case, but the only affected platform is XEN and it has been confirmed that it does not cause any side effects. [ tglx: Massaged changelog. ] Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Acked-by-and-tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Pavel Machek <pavel@ucw.cz> Cc: <ian.campbell@citrix.com> Cc: <rjw@rjwysocki.net> Cc: <len.brown@intel.com> Cc: <gregkh@linuxfoundation.org> Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Liu Gang authored
commit 1aeef303 upstream. For MPC8572/MPC8536, the status of GPIOs defined as output cannot be determined by reading GPDAT register, so the code use shadow data register instead. But the code may give the wrong status of GPIOs defined as input under some scenarios: 1. If some pins were configured as inputs and were asserted high before booting the kernel, the shadow data has been initialized with those pin values. 2. Some pins have been configured as output first and have been set to the high value, then reconfigured as input. The above cases will make the shadow data for those input pins to be set to high. Then reading the pin status will always return high even if the actual pin status is low. The code should eliminate the effects of the shadow data to the input pins, and the status of those pins should be read directly from GPDAT. Acked-by:
Scott Wood <scottwood@freescale.com> Acked-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
Liu Gang <Gang.Liu@freescale.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Trond Myklebust authored
commit c97cf606 upstream. If the DELEGRETURN errors out with something like NFS4ERR_BAD_STATEID then there is no recovery possible. Just quit without returning an error. Also, note that the client must not assume that the NFSv4 lease has been renewed when it sees an error on DELEGRETURN. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Linus Walleij authored
commit a0c20fb0 upstream. After commit e9e4ea74 "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data" The Versatile SMSC LAN91C111 is crashing like this: ------------[ cut here ]------------ kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24 task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000 PC is at smc_hardware_send_pkt+0x198/0x22c LR is at smc_hardware_send_pkt+0x24/0x22c pc : [<c01be324>] lr : [<c01be1b0>] psr: 20000013 sp : c6cd1d08 ip : 00000001 fp : 00000000 r10: c02adb08 r9 : 00000000 r8 : c6ced802 r7 : c786fba0 r6 : 00000146 r5 : c8800000 r4 : c78d6000 r3 : 0000000f r2 : 00000146 r1 : 00000000 r0 : 00000031 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 06cf4000 DAC: 00000015 Process udhcpc (pid: 43, stack limit = 0xc6cd01c0) Stack: (0xc6cd1d08 to 0xc6cd2000) 1d00: 00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868 1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60 1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000 1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000 1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000 1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000 1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000 1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740 1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff 1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc 1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88 1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0 1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08 1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000 1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000 1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002 1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c 1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0 1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0 1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8 1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000 1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000 1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000 [<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c) [<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c) [<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28) [<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8) [<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc) [<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c) Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2) ---[ end trace 81104fe70e8da7fe ]--- Kernel panic - not syncing: Fatal exception in interrupt This is because the macro operations in smc91x.h defined for Versatile are missing SMC_outsw() as used in this commit. The Versatile needs and uses the same accessors as the other platforms in the first if(...) clause, just switch it to using that and we have one problem less to worry about. This includes a hunk of a patch from Will Deacon fixin the other 32bit platforms as well: Innokom, Ramses, PXA, PCM027. Checkpatch complains about spacing, but I have opted to follow the style of this .h-file. Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Stephen M. Cameron authored
commit 88bf6d62 upstream. A return value of 1 is interpreted as an error. See pci_driver. in local_pci_probe(). If you're wondering how this ever could have worked, it's because it used to be the case that only return values less than zero were interpreted as failure. But even in the current kernel if the driver registers its various entry points with the kernel, and then returns a value which is interpreted as failure, those registrations aren't undone, so the driver still mostly works. However, the driver's remove function wouldn't be called on rmmod, and pci power management functions wouldn't work. In the case of Smart Array, since it has a battery backed cache (or else no cache) even if the driver is not shut down properly as long as there is no outstanding i/o, nothing too bad happens, which is why it took so long to notice. Requesting backport to stable because the change to pci-driver.c which requires driver probe functions to return 0 occurred between 2.6.35 and 2.6.36 (the pci power management breakage) and again between 3.7 and 3.8 (pci_dev->driver getting set to NULL in local_pci_probe() preventing driver remove function from being called on rmmod.) Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Stephen M. Cameron authored
commit 2e311fba upstream. We inadvertantly discarded the scsi status for aborted commands. For some commands (e.g. reads from tape drives) these can't be retried, and if we discarded the scsi status, the scsi mid layer couldn't notice anything was wrong and the error was not reported. Signed-off-by:
-
Dan Williams authored
commit ae5fbae0 upstream. Since commit 110dd8f1 "[SCSI] libsas: fix scr_read/write users and update the libata documentation" we have been passing pmp=1 and is_cmd=0 to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not discover correctly. His investigation found that the BIOS was passing pmp=0 while Linux was passing pmp=1 and failing to discover the drives. Update libsas to follow the libata example of pulling the pmp setting from the ata_link and correct is_cmd to be 1 since all tf's submitted through ->qc_issue are commands. Presumably libsas lldds do not care about is_cmd as they have sideband mechanisms to perform link management. http://marc.info/?l=linux-scsi&m=138179681726990 [jejb: checkpatch fix] Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Praveen Murali <pmurali@logicube.com> Tested-by:
-
James Bottomley authored
commit a1470c7b upstream. Bug report from: wenxiong@linux.vnet.ibm.com The issue is happened in dual controller configuration. We got the sysfs warnings when rmmod the ipr module. enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister() for each componment deivce, device_unregister() ->device_del()->kobject_del() ->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL. For each componment device, enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link() in which checking kobj->sd again, it has been set as NULL when doing device_unregister. So we saw all these sysfs WARNING. Tested-by: wenxiong@linux.vnet.ibm.com Signed-off-by:
-
Bo Shen authored
commit b4af6ef9 upstream. According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0. So, fix LRP for DSP mode as the datesheet specification. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Mark Brown authored
commit 2ab2b742 upstream. Otherwise we'll skip sync on resume. Signed-off-by:
-
Tom Lendacky authored
commit fc019c71 upstream. When performing an asynchronous ablkcipher operation the authenc completion callback routine is invoked, but it does not locate and use the proper IV. The callback routine, crypto_authenc_encrypt_done, is updated to use the same method of calculating the address of the IV as is done in crypto_authenc_encrypt function which sets up the callback. Signed-off-by:
-
Horia Geanta authored
commit 5638cabf upstream. There are cases when cryptlen can be zero in crypto_ccm_auth(): -encryptiom: input scatterlist length is zero (no plaintext) -decryption: input scatterlist contains only the mac plus the condition of having different source and destination buffers (or else scatterlist length = max(plaintext_len, ciphertext_len)). These are not handled correctly, leading to crashes like: root@p4080ds:~/crypto# insmod tcrypt.ko mode=45 ------------[ cut here ]------------ kernel BUG at crypto/scatterwalk.c:37! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14 task: ee12c5b0 ti: eecd0000 task.ti: eecd0000 NIP: c0204d98 LR: f9225848 CTR: c0204d80 REGS: eecd1b70 TRAP: 0700 Not tainted (3.11.0) MSR: 00029002 <CE,EE,ME> CR: 22044022 XER: 20000000 GPR00: f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464 GPR08: 00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20 GPR16: ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000 GPR24: ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460 NIP [c0204d98] scatterwalk_start+0x18/0x30 LR [f9225848] get_data_to_compute+0x28/0x2f0 [ccm] Call Trace: [eecd1c20] [f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable) [eecd1c70] [f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm] [eecd1cb0] [f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm] [eecd1cf0] [c020d77c] __test_aead+0x3ec/0xe20 [eecd1e20] [c020f35c] test_aead+0x6c/0xe0 [eecd1e40] [c020f420] alg_test_aead+0x50/0xd0 [eecd1e60] [c020e5e4] alg_test+0x114/0x2e0 [eecd1ee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eecd1ef0] [c0047058] kthread+0xa8/0xb0 [eecd1f40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000 39000001 8124000c 2f890000 7d28579e <0f090000> 81240008 91230004 4e800020 ---[ end trace 6d652dfcd1be37bd ]--- Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Signed-off-by:
-
Tom Lendacky authored
commit 41da8b5a upstream. The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain function to chain two scatterlists, but the chain pointer indication bit is not set. When the resulting scatterlist is used, for example, by sg_nents to count the number of scatterlist entries, a segfault occurs because sg_nents does not follow the chain pointer to the chained scatterlist. Update scatterwalk_sg_chain to set the chain pointer indication bit as is done by the sg_chain function. Signed-off-by:
-
- 08 Dec, 2013 14 commits
-
-
Greg Kroah-Hartman authored
-
Mikulas Patocka authored
commit fff4996b upstream. If blkcg_init_queue fails, blk_alloc_queue_node doesn't call bdi_destroy to clean up structures allocated by the backing dev. ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:260 debug_print_object+0x85/0xa0() ODEBUG: free active (active state 0) object type: percpu_counter hint: (null) Modules linked in: dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev ipt_MASQUERADE iptable_nat nf_nat_ipv4 msr nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack lm85 hwmon_vid snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq freq_table mperf sata_svw serverworks kvm_amd ide_core ehci_pci ohci_hcd libata ehci_hcd kvm usbcore tg3 usb_common libphy k10temp pcspkr ptp i2c_piix4 i2c_core evdev microcode hwmon rtc_cmos pps_core e100 skge floppy mii processor button unix CPU: 0 PID: 2739 Comm: lvchange Tainted: G W 3.10.15-devel #14 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 0000000000000009 ffff88023c3c1ae8 ffffffff813c8fd4 ffff88023c3c1b20 ffffffff810399eb ffff88043d35cd58 ffffffff81651940 ffff88023c3c1bf8 ffffffff82479d90 0000000000000005 ffff88023c3c1b80 ffffffff81039a67 Call Trace: [<ffffffff813c8fd4>] dump_stack+0x19/0x1b [<ffffffff810399eb>] warn_slowpath_common+0x6b/0xa0 [<ffffffff81039a67>] warn_slowpath_fmt+0x47/0x50 [<ffffffff8122aaaf>] ? debug_check_no_obj_freed+0xcf/0x250 [<ffffffff81229a15>] debug_print_object+0x85/0xa0 [<ffffffff8122abe3>] debug_check_no_obj_freed+0x203/0x250 [<ffffffff8113c4ac>] kmem_cache_free+0x20c/0x3a0 [<ffffffff811f6709>] blk_alloc_queue_node+0x2a9/0x2c0 [<ffffffff811f672e>] blk_alloc_queue+0xe/0x10 [<ffffffffa04c0093>] dm_create+0x1a3/0x530 [dm_mod] [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod] [<ffffffffa04c6c07>] dev_create+0x57/0x2b0 [dm_mod] [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod] [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod] [<ffffffffa04c6528>] ctl_ioctl+0x268/0x500 [dm_mod] [<ffffffff81097662>] ? get_lock_stats+0x22/0x70 [<ffffffffa04c67ce>] dm_ctl_ioctl+0xe/0x20 [dm_mod] [<ffffffff81161aad>] do_vfs_ioctl+0x2ed/0x520 [<ffffffff8116cfc7>] ? fget_light+0x377/0x4e0 [<ffffffff81161d2b>] SyS_ioctl+0x4b/0x90 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f ---[ end trace 4b5ff0d55673d986 ]--- ------------[ cut here ]------------ This fix should be backported to stable kernels starting with 2.6.37. Note that in the kernels prior to 3.5 the affected code is different, but the bug is still there - bdi_init is called and bdi_destroy isn't. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mikulas Patocka authored
commit fd7c092e upstream. Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Tomoki Sekiyama authored
commit 7c8a3679 upstream. Add locking of q->sysfs_lock into elevator_change() (an exported function) to ensure it is held to protect q->elevator from elevator_init(), even if elevator_change() is called from non-sysfs paths. sysfs path (elv_iosched_store) uses __elevator_change(), non-locking version, as the lock is already taken by elv_iosched_store(). Signed-off-by:
Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by:
-
Julian Stecklina authored
commit f9423606 upstream. The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that it gets addresses beyond the addressing capabilities of its IOMMU. intel_iommu_iova_to_phys does not. This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and (correctly) return EFAULT to the user with a helpful warning message in the kernel log. Signed-off-by:
Julian Stecklina <jsteckli@os.inf.tu-dresden.de> Acked-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Sasha Levin authored
commit 2ab68ec9 upstream. kyro would copy u32s and specify sizeof(unsigned long) as the size to copy. This would copy more data than intended and cause memory corruption and might leak kernel memory. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Stanislav Kinsbursky authored
commit f7fb86c6 upstream. There could be a situation, when NFSd was started in one network namespace, but stopped in another one. This will trigger kernel panic, because RPCBIND client is stored on per-net NFSd data, and will be NULL on NFSd shutdown. Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Weng Meiling <wengmeiling.weng@huawei.com> Signed-off-by:
-
KOBAYASHI Yoshitake authored
commit c8760069 upstream. Current MMC driver doesn't handle generic error (bit19 of device status) in write sequence. As a result, write data gets lost when generic error occurs. For example, a generic error when updating a filesystem management information causes a loss of write data and corrupts the filesystem. In the worst case, the system will never boot. This patch includes the following functionality: 1. To enable error checking for the response of CMD12 and CMD13 in write command sequence 2. To retry write sequence when a generic error occurs Messages are added for v2 to show what occurs. Signed-off-by:
KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Kees Cook authored
commit 1e87a245 upstream. A HID device could send a malicious output report that would cause the picolcd HID driver to trigger a NULL dereference during attr file writing. [jkosina@suse.cz: changed report->maxfield < 1 to report->maxfield != 1 as suggested by Bruno]. CVE-2013-2899 Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Reviewed-by:
Bruno Prémont <bonbons@linux-vserver.org> Acked-by:
Jiri Kosina <jkosina@suse.cz> [Kefeng: backported to stable 3.4: adjust filename] Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
fan.du authored
[ Upstream commit 3868204d ] commit a553e4a6 ("[PKTGEN]: IPSEC support") tried to support IPsec ESP transport transformation for pktgen, but acctually this doesn't work at all for two reasons(The orignal transformed packet has bad IPv4 checksum value, as well as wrong auth value, reported by wireshark) - After transpormation, IPv4 header total length needs update, because encrypted payload's length is NOT same as that of plain text. - After transformation, IPv4 checksum needs re-caculate because of payload has been changed. With this patch, armmed pktgen with below cofiguration, Wireshark is able to decrypted ESP packet generated by pktgen without any IPv4 checksum error or auth value error. pgset "flag IPSEC" pgset "flows 1" Signed-off-by:
Fan Du <fan.du@windriver.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 7f88c6b2 ] IPv6 stats are 64 bits and thus are protected with a seqlock. By not disabling bottom-half we could deadlock here if we don't disable bh and a softirq reentrantly updates the same mib. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f1d8cba6 ] In commit c9e90429 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used. udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context. This was detected by lockdep seqlock support. Reported-by:
jongman heo <jongman.heo@samsung.com> Fixes: 584bdf8c ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by:
-
Shawn Landden authored
[ Upstream commit d3f7d56a ] Commit 35f9c09f (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Reported-and-tested-by:
-
Veaceslav Falico authored
[ Upstream commit ec6f809f ] Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(), however the timer might fire right in the middle and thus try to re-aquire the same spinlock, leaving us in a endless loop. To fix that, use the spin_lock_bh() to block it. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") CC: "David S. Miller" <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: Willem de Bruijn <willemb@google.com> CC: Phil Sutter <phil@nwl.cc> CC: Eric Dumazet <edumazet@google.com> Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
