Allocating simple interrupt descriptors in the core code has to be multi
device irqdomain aware for the upcoming PCI/IMS support.

Change the interfaces to take a domain id into account. Use the internal
control struct for transport of arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.279112474@linutronix.de

Change the descriptor free functions to take a domain id to prepare for the
upcoming multi MSI domain per device support.

To avoid changing and extending the interfaces over and over use an core
internal control struct and hand the pointer through the various functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.220788011@linutronix.de

Change the descriptor allocation and insertion functions to take a domain
id to prepare for the upcoming multi MSI domain per device support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.163043028@linutronix.de

This reflects the functionality better. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.103554618@linutronix.de

In preparation of the upcoming per device multi MSI domain support, change
the interface to support lookups based on domain id and zero based index
within the domain.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.044613697@linutronix.de

To support multiple MSI interrupt domains per device it is necessary to
segment the xarray MSI descriptor storage. Each domain gets up to
MSI_MAX_INDEX entries.

Change the iterators so they operate with domain ids and take the domain
offsets into account.

The publicly available iterators which are mostly used in legacy
implementations and the PCI/MSI core default to MSI_DEFAULT_DOMAIN (0)
which is the id for the existing "global" domains.

No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.985498981@linutronix.de

With the upcoming per device MSI interrupt domain support it is necessary
to store the domain pointers per device.

Instead of delegating that storage to device drivers or subsystems add a
domain pointer to the msi_dev_domain array in struct msi_device_data.

This pointer is also used to take care of tearing down the irq domains when
msi_device_data is cleaned up via devres.

The interfaces into the MSI core will be changed from irqdomain pointer
based interfaces to domain id based interfaces to support multiple MSI
domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS.

Once the per device domain support is complete the irq domain pointer in
struct device::msi.domain will not longer contain a pointer to the "global"
MSI domain. It will contain a pointer to the MSI parent domain instead.

It would be a horrible maze of conditionals to evaluate all over the place
which domain pointer should be used, i.e. the "global" one in
device::msi::domain or one from the internal pointer array.

To avoid this evaluate in msi_setup_device_data() whether the irq domain
which is associated to a device is a "global" or a parent MSI domain. If it
is global then copy the pointer into the first entry of the msi_dev_domain
array.

This allows to convert interfaces and implementation to domain ids while
keeping everything existing working.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de

The upcoming support for multiple MSI domains per device requires storage
for the MSI descriptors and in a second step storage for the irqdomain
pointers.

Move the xarray into a separate data structure msi_dev_domain and create an
array with size 1 in msi_device_data, which can be expanded later when the
support for per device domains is implemented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.864887773@linutronix.de

In the upcoming per device MSI domain concept the MSI parent domains are
not allowed to be used as regular MSI domains where the MSI allocation/free
operations are applicable.

Add appropriate checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.806128070@linutronix.de

Similar to marking parent MSI domains it's required to identify per device
domains. Add flag and helpers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.747627287@linutronix.de

The new PCI/IMS (Interrupt Message Store) functionality is allowing
hardware vendors to provide implementation specific storage for the MSI
messages. This can be device memory and also host/guest memory, e.g. in
queue memory which is shared with the hardware.

This requires device specific MSI interrupt domains, which cannot be
achieved by expanding the existing PCI/MSI interrupt domain concept which is
a global interrupt domain shared by all PCI devices on a particular (IOMMU)
segment:

                                         |--- device 1
     [Vector]---[Remapping]---[PCI/MSI]--|...
                                         |--- device N

This works because the PCI/MSI[-X] space is uniform, but falls apart with
PCI/IMS which is implementation defined and must be available along with
PCI/MSI[-X] on the same device.

To support PCI/MSI[-X] plus PCI/IMS on the same device it is required to
rework the PCI/MSI interrupt domain hierarchy concept in the following way:

                              |--- [PCI/MSI] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N

That allows in the next step to create multiple interrupt domains per device:


                              |--- [PCI/MSI] device 1
                              |--- [PCI/IMS] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N
                              |--- [PCI/IMS] device N

So the domain which previously created the global PCI/MSI domain must now
act as parent domain for the per device domains.

The hierarchy depth is the same as before, but the PCI/MSI domains are then
device specific and not longer global.

Provide IRQ_DOMAIN_FLAG_MSI_PARENT, which allows to identify these parent
domains, along with helpers to query it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.690038274@linutronix.de

Create a API header for MSI specific functions which are relevant to device
drivers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.632679220@linutronix.de

irq_domain::dev is a misnomer as it's usually the rule that a device
pointer points to something which is directly related to the instance.

irq_domain::dev can point to some other device for power management to
ensure that this underlying device is not powered down when an interrupt is
allocated.

The upcoming per device MSI domains really require a pointer to the device
which instantiated the irq domain and not to some random other device which
is required for power management down the chain.

Rename irq_domain::dev to irq_domain::pm_dev and fixup the few sites which
use that pointer.

Conversion was done with the help of coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.574541683@linutronix.de

Tabular alignment of both kernel-doc and the actual struct declaration make
visual parsing way more conveniant.

No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.514944367@linutronix.de

It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de

Use bullet-list RST syntax for kernel-doc parameters' flags and interrupt
mode descriptions. Otherwise Sphinx produces "Unexpected identation" errors
and warnings.

Fixes: 5c0997dc ("PCI/MSI: Move pci_alloc_irq_vectors() to api.c")
Fixes: 017239c8 ("PCI/MSI: Move pci_irq_vector() to api.c")
Fixes: be37b842 ("PCI/MSI: Move pci_irq_get_affinity() to api.c")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ahmed S. Darwish <darwi@linutronix.de>
Link: https://lore.kernel.org/r/20221203100511.222136-1-bagasdotme@gmail.com

Fault injection tests trigger warnings like this:

  kernfs: can not remove 'chip_name', no directory
  WARNING: CPU: 0 PID: 253 at fs/kernfs/dir.c:1616 kernfs_remove_by_name_ns+0xce/0xe0
  RIP: 0010:kernfs_remove_by_name_ns+0xce/0xe0
  Call Trace:
   <TASK>
   remove_files.isra.1+0x3f/0xb0
   sysfs_remove_group+0x68/0xe0
   sysfs_remove_groups+0x41/0x70
   __kobject_del+0x45/0xc0
   kobject_del+0x29/0x40
   free_desc+0x42/0x70
   irq_free_descs+0x5e/0x90

The reason is that the interrupt descriptor sysfs handling does not roll
back on a failing kobject_add() during allocation. If the descriptor is
freed later on, kobject_del() is invoked with a not added kobject resulting
in the above warnings.

A proper rollback in case of a kobject_add() failure would be the straight
forward solution. But this is not possible due to the way how interrupt
descriptor sysfs handling works.

Interrupt descriptors are allocated before sysfs becomes available. So the
sysfs files for the early allocated descriptors are added later in the boot
process. At this point there can be nothing useful done about a failing
kobject_add(). For consistency the interrupt descriptor allocation always
treats kobject_add() failures as non-critical and just emits a warning.

To solve this problem, keep track in the interrupt descriptor whether
kobject_add() was successful or not and make the invocation of
kobject_del() conditional on that.

[ tglx: Massage changelog, comments and use a state bit. ]

Fixes: ecb3f394 ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221128151612.1786122-1-yangyingliang@huawei.com

irqreturn.h:6: warning: missing initial short description on line:
 * enum irqreturn
irqreturn.h:15: warning: Enum value 'IRQ_NONE' not described in enum 'irqreturn'
irqreturn.h:15: warning: Enum value 'IRQ_HANDLED' not described in enum 'irqreturn'
irqreturn.h:15: warning: Enum value 'IRQ_WAKE_THREAD' not described in enum 'irqreturn'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221124063013.28479-1-rdunlap@infradead.org

Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20221113202428.889624434@linutronix.de

Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20221113202428.826924043@linutronix.de

Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221113202428.760225831@linutronix.de

Neither dprc-driver.c nor fsl-mc-bus.c need anything from linux/msi.h.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221113202428.511591041@linutronix.de

Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.

Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de

No more users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.807616900@linutronix.de

All these sanity checks are now done _before_ any allocation work
happens. No point in doing it twice.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.749446904@linutronix.de

With interrupt domains the sanity check for MSI-X vector validation can be
done _before_ any allocation happens. The sanity check only applies to the
allocation functions which have an 'entries' array argument. The entries
array is filled by the caller with the requested MSI-X indices. Some drivers
have gaps in the index space which is not supported on all architectures.

The PCI/MSI irq domain has a 'feature' bit to enforce this validation late
during the allocation phase.

Just do it right away before doing any other work along with the other
sanity checks on that array.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.691357406@linutronix.de

Similar to PCI multi-MSI reject MSI-X enablement when a irq domain is
attached to the device which does not support MSI-X.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.631728309@linutronix.de

When hierarchical MSI interrupt domains are enabled then there is no point
to do tons of work and detect the missing support for multi-MSI late in the
allocation path.

Just query the domain feature flags right away. The query function is going
to be used for other purposes later and has a mode argument which influences
the result:

  ALLOW_LEGACY returns true when:
     - there is no irq domain attached (legacy support)
     - there is a irq domain attached which has the feature flag set

  DENY_LEGACY returns only true when:
     - there is a irq domain attached which has the feature flag set

This allows to use the function universally without ifdeffery in the
calling code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.574339988@linutronix.de

There is no point in doing the same sanity checks over and over in a loop
during MSI-X enablement. Put them in front of the loop and return early
when they fail.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.516946468@linutronix.de

There is no way to navigate msi.c without banging the head against the wall
every now and then because MSI and MSI-X specific functions are
intermingled and the code flow is completely non-obvious.

Reorder everthing so common helpers, MSI and MSI-X specific functions are
grouped together.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.459089736@linutronix.de

All exported device-driver MSI APIs are now grouped in one place at
drivers/pci/msi/api.c with comprehensive kernel-docs added.

Reference these kernel-docs in the official PCI/MSI howto.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.397739421@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.
    
Move pci_msi_enabled() and add kernel-doc for the function.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.331584998@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_msi_enabled() and make its kernel-doc comprehensive.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.271447896@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_irq_get_affinity() and let its kernel-doc match rest of the
file.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.214792769@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_disable_msix() and make its kernel-doc comprehensive.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.156785224@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_msix_vec_count() and make its kernel-doc comprehensive.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.099461602@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_free_irq_vectors() and make its kernel-doc comprehensive.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122015.042870570@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_irq_vector() and let its kernel-doc match the rest of the file.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.984490384@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Move pci_alloc_irq_vectors_affinity() and let its kernel-doc reference
pci_alloc_irq_vectors() documentation added in parent commit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.927531290@linutronix.de

To disentangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.

Make pci_alloc_irq_vectors() a real function instead of wrapper and add
proper kernel doc to it.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.870888193@linutronix.de