- 25 Sep, 2023 40 commits
-
-
Fabio Estevam authored
Per bq25890.yaml, 'phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' are not valid properties. Remove them to fix the following schema warning: imx8mq-librem5-r2.dtb: charger@6a: Unevaluated properties are not allowed ('phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' were unexpected) from schema $id: http://devicetree.org/schemas/power/supply/bq25890.yaml#Signed-off-by:Fabio Estevam <festevam@denx.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Per fsl-imx-gpio.yaml, 'pad-wakeup' and 'pad-wakeup-num' are not valid properties/ Remove them to fix the following schema warning: imx8qm-apalis-ixora-v1.1.dtb: gpio@5d0a0000: 'pad-wakeup', 'pad-wakeup-num' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
-
Fabio Estevam authored
Per fsl-imx-gpio.yaml, 'ngpios' is not a valid property. Remove it to fix the following schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: gpio@5d0d0000: 'ngpios' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#Signed-off-by:
-
Fabio Estevam authored
Per mdio-gpio.yaml, the node name should be 'mdio'. Change it accordingly to fix the following schema warning: imx8mq-zii-ultra-zest.dtb: bitbang-mdio: $nodename:0: 'bitbang-mdio' does not match '^mdio(@.*)?' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml#Signed-off-by:
-
Fabio Estevam authored
Per i2c-mux-pca954x.yaml, the PCA9546 I2C subnodes should be in the 'i2c@' format. Change it accordingly to fix the following schema warning: imx8mm-nitrogen-r2.dtb: i2c-mux@70: Unevaluated properties are not allowed ('i2c3@0' was unexpected) Signed-off-by: -
Fabio Estevam authored
According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one. Remove it to fix the following schema warnings: imx8mp-venice-gw73xx-2x.dtb: accelerometer@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Fabio Estevam authored
spi-nxp-fspi.yaml expects the clock-names entries to be in the following order: "fspi_en", "fspi". Change it accordingly to fix the following schema warnings: imx8ulp-evk.dtb: spi@29810000: clock-names:0: 'fspi_en' was expected from schema $id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml# imx8ulp-evk.dtb: spi@29810000: clock-names:1: 'fspi' was expected from schema $id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml#Signed-off-by:
-
Fabio Estevam authored
nxp,fspi-dll-slvdly is not documented nor used anywhere. Drop this invalid property. Signed-off-by:
-
Fabio Estevam authored
The conn_enet0_root_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by:
-
Fabio Estevam authored
The audio_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by:
-
Fabio Estevam authored
The img_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by:
-
Fabio Estevam authored
The conn clock nodes do not have any register associated with it, so they should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by:
-
Fabio Estevam authored
The dma_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by:
-
Fabio Estevam authored
The lsio_bus_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by:
-
Fabio Estevam authored
The lsio_mem_clk is not used anywhere, so simply remove it. Signed-off-by:
-
Fabio Estevam authored
The 'funnel' node does not contain a register range, so it should be placed outside of the soc node to fix schema warnings from simple-bus.yaml. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
Fabio Estevam authored
The 'funnel' node does not contain a register range, so it should be placed outside of the soc node to fix schema warnings from simple-bus.yaml. Signed-off-by:
-
Teresa Remmet authored
Add UART2 for RS232/RS485 support. Signed-off-by:
Teresa Remmet <t.remmet@phytec.de> (Updated the node by not setting the reserved bits(BIT 0 and BIT 3) and enabled internal pullup for RX and TX.) Signed-off-by:
Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by:
Cem Tenruh <c.tenruh@phytec.de> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Cem Tenruh authored
Add gpio-line-names to the imx8mp-phyboard-pollux devicetree. Signed-off-by:
-
Cem Tenruh authored
Add gpio-line-names to the imx8mp-phycore-som devicetree. Signed-off-by:
-
Teresa Remmet authored
Enable USB support for both interfaces in host mode. USB1 is directly conncted to a type-A connector and USB2 is attached to a 4-Port USB Hub. Signed-off-by:
-
Teresa Remmet authored
Add flexcan1 and flexcan2 support for CAN FD on phyBOARD-Pollux. Signed-off-by:
-
Marek Vasut authored
Remove the connector as well as all the links and only connect the PTN5150 with xHCI controller. This is sufficient to implement the role switching. Furthermore, this makes resume work without hanging. Without this patch, the platform would hang on resume of 'connector'. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Adam Ford authored
The i.MX8MP has a micfil controller which is used for interfacing with a pulse density microphone. Add the node and mark it as disabled by default. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Adam Ford authored
The i.MX8MP has an asynchronous sample rate converter which seems to be the same as what is available on the i.MX8M Nano. Signed-off-by:
-
Tim Harvey authored
This is not used by the DSA dt-binding, so remove it from the devicetrees. Signed-off-by:
-
Frank Li authored
Enable uart5 for imx93-evk board. Signed-off-by:
Frank Li <Frank.Li@nxp.com> Signed-off-by:
-
Frank Li authored
Add dma support for lpuart[1..8]. Signed-off-by:
-
Frank Li authored
Add edma<n> nodes. Signed-off-by:
-
Alexander Stein authored
This overlay enables the DSI-LVDS display chain and configures the actual panel compatible. Signed-off-by:
-
Alexander Stein authored
This overlay enables the DSI-LVDS display chain and configures the actual panel compatible. Also add the DSIM supply voltages. Signed-off-by:
-
Alexander Stein authored
This overlay enables the DSI-LVDS display chain and configures the actual panel compatible. Also add the DSIM supply voltages. Signed-off-by:
-
Alexander Stein authored
This adds the DSI-LVDS bridge including the regulator, backlight and an unspecified panel. It is expected to set the compatible when the display chain is enabled. Signed-off-by:
-
Fabio Estevam authored
The 'fsl,rgmii_txc_dly' is not a valid property. Remove it to fix the following schema warning: imx8qm-apalis-ixora-v1.1.dtb: ethernet@5b040000: Unevaluated properties are not allowed ('fsl,rgmii_txc_dly' was unexpected) from schema $id: http://devicetree.org/schemas/net/fsl,fec.yaml#Signed-off-by: -
Fabio Estevam authored
As per mmc-pwrseq-simple.yaml, the correct way to describe the GPIO is by using the 'reset-gpios' property. Change it accordingly to fix the following schema warning: imx8mq-thor96.dtb: sdio-pwrseq: 'gpio' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#Signed-off-by:
-
Fabio Estevam authored
Pass the required '#clock-cells' property and remove the invalid 'interrupt-names' property to fix the following schema warnings: imx8mq-pico-pi.dtb: pmic@4b: '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml# imx8mq-pico-pi.dtb: pmic@4b: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#Signed-off-by:
-
Fabio Estevam authored
The 'lane-mapping' property is not a valid one and cause the following schema warning: imx8mq-librem5-r2.dtb: pmic-5v-hog: 'lane-mapping' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/gpio-hog.yaml# Replace it with 'line-name'. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
Marek Vasut authored
The PDK2 carrier board had to be manually patched to obtain working PCIe with the i.MX8MP DHCOM SoM so far, because the PCIe clock generator has not been connected to the PCIe block REF_PAD_CLK inputs. Switch to use of HSIO PLL as the clock source for the PCIe block instead, and use the REF_PAD_CLK as outputs to generate PCIe clock from the SoC. This way, it is not necessary to patch the PDK2 in any way to obtain a working PCIe. Note that PDK3 has PCIe clock generator always connected to REF_PAD_CLK and is not affected. Signed-off-by:
-
Fabio Estevam authored
'pinctrl-assert-gpios' is not a valid property. Remove it to fix the following schema warning: imx8dxl-evk.dtb: spi@5a030000: Unevaluated properties are not allowed ('pinctrl-assert-gpios' was unexpected) Signed-off-by: -
Fabio Estevam authored
The imx8mm-tqma8mqml SoM used on the PHG board does not come with the QSPI flash populated, so disable it to avoid the following error message: spi-nor spi3.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00 Signed-off-by:
-
