- 25 Jul, 2018 23 commits
-
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/microchip/lan743x_main.c:2944:25: warning: symbol 'lan743x_pm_ops' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fixes the following sparse warnings: net/ipv4/tcp_timer.c:25:5: warning: symbol 'tcp_retransmit_stamp' was not declared. Should it be static? Signed-off-by:
-
Jianbo Liu authored
This fixes the following sparse warning: net/sched/cls_flower.c:1356:36: warning: incorrect type in argument 3 (different base types) net/sched/cls_flower.c:1356:36: expected unsigned short [unsigned] [usertype] value net/sched/cls_flower.c:1356:36: got restricted __be16 [usertype] vlan_tpid Signed-off-by:
Jianbo Liu <jianbol@mellanox.com> Reported-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
Tariq Toukan authored
Allow obtaining MTTs starting at any index, thus give a better cache utilization. For this, allow setting log_mtts_per_seg to 0, and use this in default. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
Anaty Rahamim Bar Kat <anaty@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== net/mlx5: Offload setting/matching on tunnel tos/ttl This series enables mlx5 offloading of tc eswitch rules that set tos/ttl (encap) or match on them (decap) for tunnels. ==================== Signed-off-by: -
Or Gerlitz authored
Enable offloading of TC matching on tos/ttl for ipv4/6 tunnels. Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Use the values provided by user-space for the encapsulation headers. Signed-off-by:
-
Or Gerlitz authored
Currnetly, the ttl for the encapsulation headers is taken from the route lookup result. As a pre-step to allow for an offload case when the user specifies the ttl, take it from the route lookup only if not zero. While here, also move to use u8 instead int for the ttl. Signed-off-by:
-
Bjorn Helgaas authored
The vxge driver doesn't need anything provided by pci_hotplug.h, so remove the unnecessary include of it. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Heiner Kallweit authored
Add a helper for checking whether polling is used to detect PHY status changes. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Krzysztof Kozlowski authored
Use generic kernel CRC32 implementation because it: 1. Should be faster (uses lookup tables), 2. Removes duplicated CRC generation code, 3. Uses well-proven algorithm instead of coding it one more time. Suggested-by:
Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Use generic kernel CRC32 implementation because it: 1. Should be faster (uses lookup tables), 2. Removes duplicated CRC generation code, 3. Uses well-proven algorithm instead of coding it one more time. Suggested-by:
-
Camelia Groza authored
genphy_config_aneg() should be called only by PHYs that implement the Clause 22 register set. Prevent Clause 45 PHYs that don't implement the register set from calling the genphy function. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Reviewed-by:
-
David S. Miller authored
Toshiaki Makita says: ==================== virtio_net: Add ethtool stat items Add some ethtool stat items useful for performance analysis. ==================== Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Toshiaki Makita authored
So we can infer the number of VM-Exits. Signed-off-by:
-
Toshiaki Makita authored
Add counters below: * Tx - xdp_tx: frames sent by ndo_xdp_xmit or XDP_TX. - xdp_tx_drops: dropped frames out of xdp_tx ones. * Rx - xdp_packets: frames went through xdp program. - xdp_tx: XDP_TX frames. - xdp_redirects: XDP_REDIRECT frames. - xdp_drops: any dropped frames out of xdp_packets ones. Signed-off-by:
-
Toshiaki Makita authored
Make sure to use the same logic in all places to determine xdp sq. This is useful for xdp counters which the following commit will introduce as well. Signed-off-by:
-
Toshiaki Makita authored
Since when XDP was introduced, drop counter has been able to be updated much more frequently than before, as XDP_DROP increments the counter. Thus for performance analysis per-queue drop counter would be useful. Also this avoids cache contention and race on updating the counter. It is currently racy because napi handlers read-modify-write it without any locks. There are more counters in dev->stats that are racy, but I left them per-device, because they are rarely updated and does not worth being per-queue counters IMHO. To fix them we need atomic ops or some kind of locks. Signed-off-by:
-
Toshiaki Makita authored
The purpose is to keep receive_buf arguments simple when more per-queue counter items are added later. Also XDP_TX related sq counters will be updated in the following changes so create a container struct virtnet_rx_stats which will includes both rq and sq statistics. For now it only covers rq stats. Signed-off-by:
-
Toshiaki Makita authored
When received packets are dropped in virtio_net driver, received packets counter is incremented but bytes counter is not. As a result, for instance if we drop all packets by XDP, only received is counted and bytes stays 0, which looks inconsistent. IMHO received packets/bytes should be counted if packets are produced by the hypervisor, like what common NICs on physical machines are doing. So fix the bytes counter. Signed-off-by:
-
David S. Miller authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A couple more MIPS fixes for 4.18: - Fix an off-by-one in reporting PCI resource sizes to userland which regressed in v3.12. - Fix writes to DDR controller registers used to flush write buffers, which regressed with some refactoring in v4.2" * tag 'mips_fixes_4.18_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: ath79: fix register address in ath79_ddr_wb_flush() MIPS: Fix off-by-one in pci_resource_to_user() -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle stations tied to AP_VLANs properly during mac80211 hw reconfig. From Manikanta Pubbisetty. 2) Fix jump stack depth validation in nf_tables, from Taehee Yoo. 3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran Ben Elisha. 4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann. 5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan. 6) Fix cached netdev name leak in nf_tables, from Florian Westphal. 7) Fix memory leaks on chain rename, also from Florian Westphal. 8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk Cheng. 9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing. 10) Fix link local address handling with VRF, from David Ahern. 11) Don't clobber 'err' on a successful call to __skb_linearize() in skb_segment(). From Eric Dumazet. 12) Fix vxlan fdb notification races, from Roopa Prabhu. 13) Hash UDP fragments consistently, from Paolo Abeni. 14) If TCP receives lots of out of order tiny packets, we do really silly stuff. Make the out-of-order queue ending more robust to this kind of behavior, from Eric Dumazet. 15) Don't leak netlink dump state in nf_tables, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: axienet: Fix double deregister of mdio qmi_wwan: fix interface number for DW5821e production firmware ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull bnx2x: Fix invalid memory access in rss hash config path. net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper r8169: restore previous behavior to accept BIOS WoL settings cfg80211: never ignore user regulatory hint sock: fix sg page frag coalescing in sk_alloc_sg netfilter: nf_tables: move dumper state allocation into ->start tcp: add tcp_ooo_try_coalesce() helper tcp: call tcp_drop() from tcp_data_queue_ofo() tcp: detect malicious patterns in tcp_collapse_ofo_queue() tcp: avoid collapses in tcp_prune_queue() if possible tcp: free batches of packets in tcp_prune_ofo_queue() ip: hash fragments consistently ipv6: use fib6_info_hold_safe() when necessary can: xilinx_can: fix power management handling can: xilinx_can: fix incorrect clear of non-processed interrupts can: xilinx_can: fix RX overflow interrupt not being enabled can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting ...
-
- 24 Jul, 2018 17 commits
-
-
Shubhrajyoti Datta authored
If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
-
Aleksander Morgado authored
The original mapping for the DW5821e was done using a development version of the firmware. Confirmed with the vendor that the final USB layout ends up exposing the QMI control/data ports in USB config #1, interface #0, not in interface #1 (which is now a HID interface). T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Fixes: e7e197ed ("qmi_wwan: add support for the Dell Wireless 5821e module") Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Willem de Bruijn authored
Syzbot reported a read beyond the end of the skb head when returning IPV6_ORIGDSTADDR: BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242 CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x5ef/0x860 net/core/scm.c:242 ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719 ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733 rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521 [..] This logic and its ipv4 counterpart read the destination port from the packet at skb_transport_offset(skb) + 4. With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a packet that stores headers exactly up to skb_transport_offset(skb) in the head and the remainder in a frag. Call pskb_may_pull before accessing the pointer to ensure that it lies in skb head. Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com Signed-off-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Jack Morgenstein authored
Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp context, rather than the one passed in the input modifier. However, the qp number in the qp context is not defined as a required parameter by the FW. Therefore, drivers may choose to not specify the qp number in the qp context for the reset-to-init transition. Thus, we must save the qp number passed in the command input modifier -- which is always present. (This saved qp number is used as the input modifier for command 2RST_QP when a slave's qp's are destroyed). Fixes: c82e9aa0 ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by:
-
Nishanth Devarajan authored
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets according to their skb->priority field. Under congestion, already-enqueued lower priority packets will be dropped to make space available for higher priority packets. Skbprio was conceived as a solution for denial-of-service defenses that need to route packets with different priorities as a means to overcome DoS attacks. v5 *Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set default sch->limit to 64. v4 *Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man page for Skbprio, in iproute2. v3 *Drop max_limit parameter in struct skbprio_sched_data and instead use sch->limit. *Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for qdisc (previously being referenced every time qdisc changes). *Move qdisc's detailed description from in-code to Documentation/networking. *When qdisc is saturated, enqueue incoming packet first before dequeueing lowest priority packet in queue - improves usage of call stack registers. *Introduce and use overlimit stat to keep track of number of dropped packets. v2 *Use skb->priority field rather than DS field. Rename queueing discipline as SKB Priority Queue (previously Gatekeeper Priority Queue). *Queueing discipline is made classful to expose Skbprio's internal priority queues. Signed-off-by:
Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by:
Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by:
Cody Doucette <doucette@bu.edu> Reviewed-by:
Michel Machado <michel@digirati.com.br> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by:
-
David S. Miller authored
Stephen Hemminger says: ==================== net whitespace cleanups Ran script that I use to check for trailing whitespace and blank lines at end of files across all files in net/ directory. These are errors that checkpatch reports and git flags. These are the resulting fixes broken up mostly by subsystem. ==================== Signed-off-by: -
Stephen Hemminger authored
Several files have extra line at end of file. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Remove trailing whitespace and extra lines at EOF Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Remove blank line at EOF and trailing whitespace. Signed-off-by:
-
