- 16 Feb, 2018 4 commits
-
-
Jon Maloy authored
The message transmission and reception in the topology server is more generic than is currently necessary. By basing the funtionality on the fact that we only send items of type struct tipc_event and always receive items of struct tipc_subcr we can make several simplifications, and also get rid of some unnecessary dynamic memory allocations. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
It is unnecessary to keep two structures, struct tipc_conn and struct tipc_subscriber, with a one-to-one relationship and still with different life cycles. The fact that the two often run in different contexts, and still may access each other via direct pointers constitutes an additional hazard, something we have experienced at several occasions, and still see happening. We have identified at least two remaining problems that are easier to fix if we simplify the topology server data structure somewhat. - When there is a race between a subscription up/down event and a timeout event, it is fully possible that the former might be delivered after the latter, leading to confusion for the receiver. - The function tipc_subcrp_timeout() is executing in interrupt context, while the following call chain is at least theoretically possible: tipc_subscrp_timeout() tipc_subscrp_send_event() tipc_conn_sendmsg() conn_put() tipc_conn_kref_release() sock_release(sock) I.e., we end up calling a function that might try to sleep in interrupt context. To eliminate this, we need to ensure that the tipc_conn structure and the socket, as well as the subscription instances, only are deleted in work queue context, i.e., after the timeout event really has been sent out. We now remove this unnecessary complexity, by merging data and functionality of the subscriber structure into struct tipc_conn and the associated file server.c. We thereafter add a spinlock and a new 'inactive' state to the subscription structure. Using those, both problems described above can be easily solved. Acked-by: -
Jon Maloy authored
Interaction between the functionality in server.c and subscr.c is done via function pointers installed in struct server. This makes the code harder to follow, and doesn't serve any obvious purpose. Here, we replace the function pointers with direct function calls. Acked-by:
-
Jon Maloy authored
The socket handling in the topology server is unnecessarily generic. It is prepared to handle both SOCK_RDM, SOCK_DGRAM and SOCK_STREAM type sockets, as well as the only socket type which is really used, SOCK_SEQPACKET. We now remove this redundant code to make the code more readable. Acked-by:
-
- 15 Feb, 2018 15 commits
-
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-02-15 Here's the first bluetooth-next pull request targetting the 4.17 kernel release. - Fixes & cleanups to Atheros and Marvell drivers - Support for two new Realtek controllers - Support for new Intel Bluetooth controller - Fix for supporting multiple slave-role Bluetooth LE connections ==================== Signed-off-by:
-
Prashant Bhole authored
eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David Ahern authored
Remove rt_table_id from rtable. It was added for getroute to return the table id that was hit in the lookup. With the changes for fibmatch the table id can be extracted from the fib_info returned in the fib_result so it no longer needs to be in rtable directly. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Brenda J. Butler says: ==================== tools: tc-testing: Plugin Architecture To make tdc.py more general, we are introducing a plugin architecture. This patch set first organizes the command line parameters, then introduces the plugin architecture and some example plugins. ==================== Signed-off-by: -
Brenda J. Butler authored
Signed-off-by:
Brenda J. Butler <bjb@mojatatu.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Brenda J. Butler authored
Run the command under test under valgrind. Produce an extra set of tap output for the memory check on each test. Signed-off-by:
-
Brenda J. Butler authored
Move the functionality of creating a namespace before the test suite and destroying it afterwards to a plugin. Signed-off-by:
-
Brenda J. Butler authored
Move the functionality that checks for root permissions into a plugin. Signed-off-by:
-
Brenda J. Butler authored
This should be a general test architecture, and yet allow specific tests to be done. Introduce a plugin architecture. An individual test has 4 stages, setup/execute/verify/teardown. Each plugin gets a chance to run a function at each stage, plus one call before all the tests are called ("pre" suite) and one after all the tests are called ("post" suite). In addition, just before each command is executed, the plugin gets a chance to modify the command using the "adjust_command" hook. This makes the test suite quite flexible. Future patches will take some functionality out of the tdc.py script and place it in plugins. To use the plugins, place the implementation in the plugins directory and run tdc.py. It will notice the plugins and use them. Signed-off-by: -
Brenda J. Butler authored
Split the test_runner function into the loop part (test_runner) and the contents (run_one_test) for maintainability. It makes it a little easier to catch exceptions in an individual test, and keep going (and flush a bunch of tap results for the skipped tests). Signed-off-by:
-
Brenda J. Butler authored
Separate the functionality of the command line parameters into "selection" parameters, "action" parameters and other parameters. "Selection" parameters are for choosing which tests on which to act. "Action" parameters are for choosing what to do with the selected tests. "Other" parameters are for global effect (like "help" or "verbose"). With this commit, we add the ability to name a directory as another selection mechanism. We can accumulate a number of tests by directory, file, category, or even by test id, instead of being constrained to run all tests in one collection or just one test. Signed-off-by:
-
David S. Miller authored
Kirill Tkhai says: ==================== net: Add ioctl() SIOCGSKNS cmd to allow obtaining net ns of tun device Currently, it's not possible to get or check net namespace, which was used to create tun socket. User may have two tun devices with the same names in different nets, and there is no way to differ them each other. The patchset adds support for ioctl() cmd SIOCGSKNS for tun devices. It will allow people to obtain net namespace file descriptor like we allow to do that for sockets in general. v2: Add new patch [2/3] to export open_related_ns(). ==================== Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Kirill Tkhai authored
This patch adds possibility to get tun device's net namespace fd in the same way we allow to do that for sockets. Socket ioctl numbers do not intersect with tun-specific, and there is already SIOCSIFHWADDR used in tun code. So, SIOCGSKNS number is choosen instead of custom-made for this functionality. Note, that open_related_ns() uses plain get_net_ns() and it's safe (net can't be already dead at this moment): tun socket is allocated via sk_alloc() with zero last arg (kern = 0). So, each alive socket increments net::count, and the socket is definitely alive during ioctl syscall. Also, common variable net is introduced, so small cleanup in TUNSETIFF is made. Signed-off-by:
-
Kirill Tkhai authored
This function will be used to obtain net of tun device. Signed-off-by:
-
Kirill Tkhai authored
This function will be used to obtain net of tun device. Signed-off-by:
-
- 14 Feb, 2018 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-02-14 This patch series enables the new mqprio hardware offload mechanism creating traffic classes on VFs for XL710 devices. The parameters needed to configure these traffic classes/queue channels are provides by the user via the tc tool. A maximum of four traffic classes can be created on each VF. This patch series also enables application of cloud filters to each of these traffic classes. The cloud filters are applied using the tc-flower classifier. Example: 1. tc qdisc add dev vf0 root mqprio num_tc 4 map 0 0 0 0 1 2 2 3\ queues 2@0 2@2 1@4 1@5 hw 1 mode channel 2. tc qdisc add dev vf0 ingress 3. ethtool -K vf0 hw-tc-offload on 4. ip link set eth0 vf 0 spoofchk off 5. tc filter add dev vf0 protocol ip parent ffff: prio 1 flower dst_ip\ 192.168.3.5/32 ip_proto udp dst_port 25 skip_sw hw_tc 2 ==================== Signed-off-by: -
Tom Herbert authored
In kcm_attach strp_done is called when sk_user_data is already set to fail the attach. strp_done needs the strp to be stopped and warns if it isn't. Call strp_stop in this case to eliminate the warning message. Reported-by: syzbot+88dfb55e4c8b770d86e3@syzkaller.appspotmail.com Fixes: e5571240 ("kcm: Check if sk_user_data already set in kcm_attach" Signed-off-by:
Tom Herbert <tom@quantonium.net> Signed-off-by:
-
Wadim Egorov authored
Add documentation of ti,clk-output-sel which can be used to select a specific clock for CLK_OUT. Signed-off-by:
Wadim Egorov <w.egorov@phytec.de> Signed-off-by:
Daniel Schultz <d.schultz@phytec.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Wadim Egorov authored
The DP83867 has a muxing option for the CLK_OUT pin. It is possible to set CLK_OUT for different channels. Create a binding to select a specific clock for CLK_OUT pin. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Jon Maloy authored
Currently, the default link tolerance set in struct tipc_bearer only has effect on links going up after that moment. I.e., a user has to reset all the node's links across that bearer to have the new value applied. This is too limiting and disturbing on a running cluster to be useful. We now change this so that also already existing links are updated dynamically, without any need for a reset, when the bearer value is changed. We leverage the already existing per-link functionality for this to achieve the wanted effect. Acked-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: speed up reading on-chip memory This series of patches speed up reading on-chip memory (EDC and MC) by reading 64-bits at a time. Patch 1 reworks logic to read EDC and MC. Patch 2 adds logic to read EDC and MC 64-bits at a time. v2: - Dropped AVX CPU intrinsic instructions. - Use readq() to read 64-bits at a time. ==================== Signed-off-by: -
Rahul Lakkireddy authored
Use readq() (via t4_read_reg64()) to read 64-bits at a time. Read residual in 32-bit multiples. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
Rework logic to read EDC and MC. Do 32-bit reads at a time. Signed-off-by:
-
David Ahern authored
IPv4 uses set_lwt_redirect to set the lwtunnel redirect functions as needed. Move it to lwtunnel.h as lwtunnel_set_redirect and change IPv6 to also use it. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== PTP support for DSA and mv88e6xxx driver. This patchset adds support for using the PTP hardware in switches supported by the mv88e6xxx driver. The code was produces in collaboration with Brandon Streiff doing the initial implementation, and then Richard Cochran and Andrew Lunn making further changes and cleanups. The code is sufficient to use ptp4l on a single DSA interface, either as a master or a slave. Due to the use of an MDIO bus to access the switch, reading hardware timestamps is slower than what ptp4l expects. Thus it is necessary to use the option --tx_timestamp_timeout=32. Heavy use of ethtool -S, or bridge fdb show can also upset ptp4l. Patches to address this will follow. Further work is requires to support bridges using Boundary Clock or Transparent Clock mode. Since the RFC, an overflow bug has been fixed. Brandon Streiff has also Acked-by: the updates to his initial patchset. ==================== Signed-off-by: -
Brandon Streiff authored
88E6341 devices default to timestamping at the PHY, but due to a hardware issue, timestamps via this component are unreliable. For this family, configure the PTP hardware to force the timestamping to occur at the MAC. Signed-off-by:
Brandon Streiff <brandon.streiff@ni.com> Signed-off-by:
-
Brandon Streiff authored
This patch implements RX/TX timestamping support. The Marvell PTP hardware supports RX timestamping individual message types, but for simplicity we only support the EVENT receive filter since few if any clients bother with the more specific filter types. checkpatch and reverse Christmas tree changes by Andrew Lunn. Re-factor duplicated code paths and avoid IfOk anti-pattern, use the common ptp worker thread from the class layer and time stamp UDP/IPv4 frames as well as Layer-2 frame by Richard Cochran. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Brandon Streiff authored
Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by:
-
Brandon Streiff authored
This patch adds support to the dsa slave network device so that switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the ethtool timestamp-info interface. Signed-off-by:
-
Brandon Streiff authored
This patch adds support for configuring mv88e6xxx GPIO lines as PTP pins, so that they may be used for time stamping external events or for periodic output. Checkpatch and reverse Christmas tree fixes by Andrew Lunn Periodic output removed by Richard Cochran, until a better abstraction of a VCO is added to Linux in general. Signed-off-by:
-
Brandon Streiff authored
MV88E6352 and later switches support GPIO control through the "Scratch & Misc" global2 register. (Older switches do too, though with a slightly different register interface. Only the 6352-style is implemented here.) Add a new file, global2_scratch.c, for operations in the Scratch & Misc space. Additionally, add a GPIO operations structure to present an abstract view over GPIO manipulation. Reverse Christmas tree and unsigned has been replaced with unsigned int by Andrew Lunn. Signed-off-by:
-
Brandon Streiff authored
This patch adds basic support for exposing the 32-bit timestamp counter inside the mv88e6xxx switch as a ptp_clock. Adjfine implemented by Richard Cochran. Andrew Lunn: fix return value of PTP stub function. Signed-off-by:
-
Brandon Streiff authored
This patch implements support for accessing the Precision Time Protocol and Time Application Interface registers via the AVB register interface in the Global 2 register. The register interface differs slightly between different models; older models use a 3-bit operations field, while newer models use a 2-bit field. The operations values and the special "global port" values are different between the two. This is a similar split to the differences in the "Ingress Rate" register between models, so, like in that case, we call the two variants "6352" and "6390" and create an ops structure to abstract between the two. checkpatch fixups by Andrew Lunn Signed-off-by:
-
Brandon Streiff authored
Let the mv88e6xxx_g2_* register accessor functions be accessible outside of global2.c. Signed-off-by:
-
Andrew Lunn authored
When NET_PTP_CLASSIFY is disabled, a stub function is required in order that the drivers compile. Signed-off-by:
-
Eric Dumazet authored
배석진 reported that in some situations, packets for a given 5-tuple end up being processed by different CPUS. This involves RPS, and fragmentation. 배석진 is seeing packet drops when a SYN_RECV request socket is moved into ESTABLISH state. Other states are protected by socket lock. This is caused by a CPU losing the race, and simply not caring enough. Since this seems to occur frequently, we can do better and perform a second lookup. Note that all needed memory barriers are already in the existing code, thanks to the spin_lock()/spin_unlock() pair in inet_ehash_insert() and reqsk_put(). The second lookup must find the new socket, unless it has already been accepted and closed by another cpu. Note that the fragmentation could be avoided in the first place by use of a correct TCP MSS option in the SYN{ACK} packet, but this does not mean we can not be more robust. Many thanks to 배석진 for a very detailed analysis. Reported-by:배석진 <soukjin.bae@samsung.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
