- 27 Sep, 2012 7 commits
-
-
Ezequiel Garcia authored
This function returns an integer and it's mandatory to check the return code. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean Delvare authored
The Terratec Cinergy T PCIe Dual is based on the CX23885, and uses MT2063, DRX-3913k and DRX-3916k chips, so select the relevant drivers. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Alan Cox authored
We want to check the contents not the array itself versus NULL Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Antti Palosaari authored
This reduces power consumption 10mA. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Disable RXEN and enable RESETN pins on attach to ensure chip is totally powered down after attach. Signed-off-by:
-
Guennadi Liakhovetski authored
A recent commit commit f135a8a2 Author: Hans Verkuil <hans.verkuil@cisco.com> [media] sh_vou: remove V4L2_FL_LOCK_ALL_FOPS broke compilation of sh_vou.c: drivers/media/platform/sh_vou.c: In function 'sh_vou_mmap': drivers/media/platform/sh_vou.c:1227: error: 'vdev' undeclared (first use in this function) drivers/media/platform/sh_vou.c:1227: error: (Each undeclared identifier is reported only once drivers/media/platform/sh_vou.c:1227: error: for each function it appears in.) drivers/media/platform/sh_vou.c: In function 'sh_vou_poll': drivers/media/platform/sh_vou.c:1242: error: 'vdev' undeclared (first use in this function) make[2]: *** [drivers/media/platform/sh_vou.o] Error 1 Add missing variable definitions. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
- 26 Sep, 2012 33 commits
-
-
Hans Verkuil authored
When the separate tda9875 driver was merged into tvaudio the copyright line of the tda9875 driver was dropped inadvertently. Add it back. Signed-off-by:
-
Hans Verkuil authored
VIDIOC_S_HW_FREQ_SEEK should return EAGAIN when called in non-blocking mode. This might change in the future if we add support for this in the future, but right now this is not supported. Signed-off-by:
-
Hans Verkuil authored
VIDIOC_S_HW_FREQ_SEEK should return EAGAIN when called in non-blocking mode. This might change in the future if we add support for this in the future, but right now this is not supported. Signed-off-by:
-
Hans Verkuil authored
Merge the two entries since they are one and the same error. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Sakari Ailus authored
Provide module ident information through sysfs. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.if> Signed-off-by:
-
Sakari Ailus authored
The format shown on the links internal to the sensor was the first one enumerated from the sensor, not the highest bit depth data that can be produced by the sensor. Correct this. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Sachin Kamat authored
smiapp_replace_limit_at() function is not called by the driver. This was detected by sparse as: drivers/media/i2c/smiapp/smiapp-quirk.c:64:5: warning: symbol 'smiapp_replace_limit_at' was not declared. Should it be static? Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
devm_* functions are device managed functions and make code a bit smaller and cleaner. Signed-off-by:
-
Sangwook Lee authored
This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by:
Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
New mem-to-mem video drivers should use V4L2_CAP_VIDEO_M2M capability, rather than ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT flags, as outlined in commit a1367f1b. Acked-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
channel_first_int[][] variable is used as a flag for the ISR, This flag was being set after enabling the interrupts, There where situations when the isr occurred even before the flag was set dues to which it was causing the application hang. This patch sets channel_first_int[][] flag just before enabling the interrupt. Reported-by:
David Oleszkiewicz <doleszki@adsyscontrols.com> Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by:
-
Hans Verkuil authored
Remove old videobuf-core.h includes. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Philipp Zabel authored
This fixes a failure in vb2_qbuf in user pointer mode where __qbuf_userptr checks if the buffer queued by userspace is large enough. The failure would happen if coda_queue_setup was called with empty fmt (and thus set the expected buffer size to the maximum resolution), and userspace queues buffers of smaller size - corresponding to the negotiated dimensions - were queued. Explicitly setting sizeimage to the value negotiated via s_fmt fixes the issue. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
The hardware can also rotate in 90° steps, but there is no corresponding V4L2_CID defined yet. Signed-off-by:
-
Philipp Zabel authored
VIDIOC_TRY_FMT would incorrectly return bytesperline * height, instead of width * height * 3 / 2. Signed-off-by:
-
Philipp Zabel authored
While the CODA is running a PIC_RUN command, its registers are not to be touched. Signed-off-by:
-
Philipp Zabel authored
USERPTR buffer support is provided by the videobuf2 framework. Signed-off-by:
-
Philipp Zabel authored
Add a 1 second timeout for each PIC_RUN command to the CODA. In case it locks up, stop all queues and dequeue remaining buffers. Signed-off-by:
-
Philipp Zabel authored
Determining the next free instance just by incrementing and decrementing an instance counter does not work: if there are two instances opened, 0 and 1, and instance 0 is released, the next call to coda_open will create a new instance with index 1, but instance 1 is already in use. Instead, scan a bitfield of active instances to determine the first free instance index. Signed-off-by:
-
Philipp Zabel authored
job_ready is supposed to signal whether a context is ready to be added to the job queue, not whether the CODA is ready to run it immediately. Calling v4l2_m2m_job_finish at the end of coda_irq_handler already guarantees that the coda is ready when v4l2-mem2mem eventually tries to run the next queued job. Signed-off-by:
-
Philipp Zabel authored
Some codecs running on CODA need internal framebuffers for reference and reconstructed frames. Allocate them separately, and do not use the input vb2_buffers: those will be handed off to userspace regularly, and there is no way to signal to the CODA which of the registered framebuffers are off limits. As a consequence, userspace is now free to choose the number of v4l2 buffers. This patch also includes the code to set up the parameter buffer for CODA7 and above with 64-bit AXI bus width. Signed-off-by:
-
Philipp Zabel authored
This uses the ARCH_MXC specific iram_alloc API to allocate a work buffer in the SoC's on-chip SRAM and sets up the AXI_SRAM_USE register. In the future, the allocation will be converted to use the genalloc API. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Add support for loading a raw firmware with 16-bit chars ordered in little-endian 64-bit words, corresponding to the memory access pattern of CODA7 and above: When writing the boot code into the code download register, the chars have to be reordered back. Signed-off-by:
-
Sylwester Nawrocki authored
New mem-to-mem video drivers should use V4L2_CAP_VIDEO_M2M capability, rather than ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT flags, as outlined in commit a1367f1b. Signed-off-by:
-
Hans Verkuil authored
Check against q->fileio to see if the queue owner should be set or not. The former check against the return value of read or write is wrong, since read/write can return an error, even if the queue is in streaming mode. For example, EAGAIN when in non-blocking mode. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This makes it easier to read and also ties in more closely with the profile concept. Signed-off-by:
-
Hans Verkuil authored
The ioctl validity checks have been improved and now take vfl_type and vfl_dir into account. During the 2012 Media Workshop it was decided that these improved v4l2 core checks should be added as they simplified drivers and made drivers behave consistently. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
