- 20 Mar, 2015 4 commits
-
-
Shiraz Hashim authored
commit 23aaed66 upstream. walk_page_range() silently skips vma having VM_PFNMAP set, which leads to undesirable behaviour at client end (who called walk_page_range). Userspace applications get the wrong data, so the effect is like just confusing users (if the applications just display the data) or sometimes killing the processes (if the applications do something with misunderstanding virtual addresses due to the wrong data.) For example for pagemap_read, when no callbacks are called against VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual address range at wrong index. Eventually userspace may get wrong pagemap data for a task. Corresponding to a VM_PFNMAP marked vma region, kernel may report mappings from subsequent vma regions. User space in turn may account more pages (than really are) to the task. In my case I was using procmem, procrack (Android utility) which uses pagemap interface to account RSS pages of a task. Due to this bug it was giving a wrong picture for vmas (with VM_PFNMAP set). Fixes: a9ff785e ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas") Signed-off-by:
Shiraz Hashim <shashim@codeaurora.org> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Myron Stowe authored
commit 06cf35f9 upstream. Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e81648 ("PCI: Restore detection of read-only BARs"). Prior to 36e81648, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e81648, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e81648 ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdfReported-and-tested-by:
Nix <nix@esperi.org.uk> Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> [ kamal: backport to 3.13-stable: pcibios_bus_to_resource takes (pci_dev *) ] Signed-off-by:
-
Eric Nelson authored
commit 58cc9c9a upstream. To quote from section 1.3.1 of the data sheet: The SGTL5000 has an internal reset that is deasserted 8 SYS_MCLK cycles after all power rails have been brought up. After this time, communication can start ... 1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK. Signed-off-by:
Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Charlotte Richardson authored
commit 51ac3d2f upstream. NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by:
Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by:
-
- 19 Mar, 2015 36 commits
-
-
Johan Hovold authored
commit 49d2ca84 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when setting the gpio-line polarity. Fixes: 07697461 ("gpiolib: add support for changing value polarity in sysfs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> [ kamal: backport to 3.13-stable: applied to drivers/gpio/gpiolib.c ] Signed-off-by:
-
Johan Hovold authored
commit 0f303db0 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when creating a link. Fixes: a4177ee7 ("gpiolib: allow exported GPIO nodes to be named using sysfs links") Signed-off-by:
-
Hemmo Nieminen authored
commit c7754e75 upstream. As printk() invocation can cause e.g. a TLB miss, printk() cannot be called before the exception handlers have been properly initialized. This can happen e.g. when netconsole has been loaded as a kernel module and the TLB table has been cleared when a CPU was offline. Call cpu_report() in start_secondary() only after the exception handlers have been initialized to fix this. Without the patch the kernel will randomly either lockup or crash after a CPU is onlined and the console driver is a module. Signed-off-by:
Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8953/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
karl beldan authored
commit 150ae0e9 upstream. The carry from the 64->32bits folding was dropped, e.g with: saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1, csum_tcpudp_nofold returned 0 instead of 1. Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
commit 4161b450 upstream. When ak4114 work calls its callback and the callback invokes ak4114_reinit(), it stalls due to flush_delayed_work(). For avoiding this, control the reentrance by introducing a refcount. Also flush_delayed_work() is replaced with cancel_delayed_work_sync(). The exactly same bug is present in ak4113.c and fixed as well. Reported-by:
Pavel Hofman <pavel.hofman@ivitera.com> Acked-by:
Jaroslav Kysela <perex@perex.cz> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Bhuvanchandra DV authored
commit 973fbce6 upstream. devm_* API was supposed to be used only in probe function call. Memory is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to memory leak. Avoid using devm_kzalloc in dspi_setup_transfer and use kzalloc instead. Also add the dspi_cleanup function to free the controller data upon cleanup. Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by:
-
Axel Lin authored
commit 0e0cd9ea upstream. The memory allocated for chip is not freed anywhere. Convert to use devm_kzalloc to fix the memory leak. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Bo Shen authored
commit a43bd7e1 upstream. According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge. Reported-by:
Songjun Wu <songjun.wu@atmel.com> Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
Lai Jiangshan authored
commit 4bee9686 upstream. The following race exists in the smpboot percpu threads management: CPU0 CPU1 cpu_up(2) get_online_cpus(); smpboot_create_threads(2); smpboot_register_percpu_thread(); for_each_online_cpu(); __smpboot_create_thread(); __cpu_up(2); This results in a missing per cpu thread for the newly onlined cpu2 and in a NULL pointer dereference on a consecutive offline of that cpu. Proctect smpboot_register_percpu_thread() with get_online_cpus() to prevent that. [ tglx: Massaged changelog and removed the change in smpboot_unregister_percpu_thread() because that's an optimization and therefor not stable material. ] Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/1406777421-12830-1-git-send-email-laijs@cn.fujitsu.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sachin Prabhu authored
commit ca7df8e0 upstream. Commit c11f1df5 requires writers to wait for any pending oplock break handler to complete before proceeding to write. This is done by waiting on bit CIFS_INODE_PENDING_OPLOCK_BREAK in cifsFileInfo->flags. This bit is cleared by the oplock break handler job queued on the workqueue once it has completed handling the oplock break allowing writers to proceed with writing to the file. While testing, it was noticed that the filehandle could be closed while there is a pending oplock break which results in the oplock break handler on the cifsiod workqueue being cancelled before it has had a chance to execute and clear the CIFS_INODE_PENDING_OPLOCK_BREAK bit. Any subsequent attempt to write to this file hangs waiting for the CIFS_INODE_PENDING_OPLOCK_BREAK bit to be cleared. We fix this by ensuring that we also clear the bit CIFS_INODE_PENDING_OPLOCK_BREAK when we remove the oplock break handler from the workqueue. The bug was found by Red Hat QA while testing using ltp's fsstress command. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Felix Fietkau authored
commit a3e6c1ef upstream. If the irq_chip does not define .irq_disable, any call to disable_irq will defer disabling the IRQ until it fires while marked as disabled. This assumes that the handler function checks for this condition, which handle_percpu_irq does not. In this case, calling disable_irq leads to an IRQ storm, if the interrupt fires while disabled. This optimization is only useful when disabling the IRQ is slow, which is not true for the MIPS CPU IRQ. Disable this optimization by implementing .irq_disable and .irq_enable Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8949/Signed-off-by:
-
Guenter Roeck authored
commit e262eb93 upstream. Fix misspelled define. Fixes: 33692f27 ("vm: add VM_FAULT_SIGSEGV handling support") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Peter Zijlstra authored
commit c3c87e77 upstream. The fix from 9fc81d87 ("perf: Fix events installation during moving group") was incomplete in that it failed to recognise that creating a group with events for different CPUs is semantically broken -- they cannot be co-scheduled. Furthermore, it leads to real breakage where, when we create an event for CPU Y and then migrate it to form a group on CPU X, the code gets confused where the counter is programmed -- triggered in practice as well by me via the perf fuzzer. Fix this by tightening the rules for creating groups. Only allow grouping of counters that can be co-scheduled in the same context. This means for the same task and/or the same cpu. Fixes: 9fc81d87 ("perf: Fix events installation during moving group") Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Hannes Frederic Sowa authored
commit 6e9e16e6 upstream. Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
-
Daniel Borkmann authored
commit 3f2ab135 upstream. When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Daniel Borkmann authored
commit 7913ecf6 upstream. In cls_bpf_modify_existing(), we read out the number of filter blocks, do some sanity checks, allocate a block on that size, and copy over the BPF instruction blob from user space, then pass everything through the classic BPF checker prior to installation of the classifier. We should reject mismatches here, there are 2 scenarios: the number of filter blocks could be smaller than the provided instruction blob, so we do a partial copy of the BPF program, and thus the instructions will either be rejected from the verifier or a valid BPF program will be run; in the other case, we'll end up copying more than we're supposed to, and most likely the trailing garbage will be rejected by the verifier as well (i.e. we need to fit instruction pattern, ret {A,K} needs to be last instruction, load/stores must be correct, etc); in case not, we would leak memory when dumping back instruction patterns. The code should have only used nla_len() as Dave noted to avoid this from the beginning. Anyway, lets fix it by rejecting such load attempts. Fixes: 7d1d65cb ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by:
-
Joe Thornber authored
commit 2a7eaea0 upstream. You can't modify the metadata in these modes. It's better to fail these messages immediately than let the block-manager deny write locks on metadata blocks. Otherwise these failed metadata changes will trigger 'needs_check' to get set in the metadata superblock -- requiring repair using the thin_check utility. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 766a7888 upstream. Commit 9b1cc9f2 ("dm cache: share cache-metadata object across inactive and active DM tables") mistakenly ignored the use of ERR_PTR returns. Restore missing IS_ERR checks and ERR_PTR returns where appropriate. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ilya Dryomov authored
commit e69b8d41 upstream. This effectively reverts the last hunk of 392a9dad ("rbd: detect when clone image is flattened"). The problem with parent_overlap != 0 condition is that it's possible and completely valid to have an image with parent_overlap == 0 whose parent state needs to be cleaned up on unmap. The next commit, which drops the "clone image now standalone" logic, opens up another window of opportunity to hit this, but even without it # cat parent-ref.sh #!/bin/bash rbd create --image-format 2 --size 1 foo rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar rbd resize --allow-shrink --size 0 bar rbd resize --size 1 bar DEV=$(rbd map bar) rbd unmap $DEV leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client hanging around. My thinking behind calling rbd_dev_parent_put() unconditionally is that there shouldn't be any requests in flight at that point in time as we are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused by flatten is delayed by in-flight requests, it will have finished by the time we reach rbd_dev_unprobe() caused by unmap, thus turning unconditional rbd_dev_parent_put() into a no-op. Fixes: http://tracker.ceph.com/issues/10352Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Ilya Dryomov authored
commit ae43e9d0 upstream. The comment for rbd_dev_parent_get() said * We must get the reference before checking for the overlap to * coordinate properly with zeroing the parent overlap in * rbd_dev_v2_parent_info() when an image gets flattened. We * drop it again if there is no overlap. but the "drop it again if there is no overlap" part was missing from the implementation. This lead to absurd parent_ref values for images with parent_overlap == 0, as parent_ref was incremented for each img_request and virtually never decremented. Fix this by leveraging the fact that refresh path calls rbd_dev_v2_parent_info() under header_rwsem and use it for read in rbd_dev_parent_get(), instead of messing around with atomics. Get rid of barriers in rbd_dev_v2_parent_info() while at it - I don't see what they'd pair with now and I suspect we are in a pretty miserable situation as far as proper locking goes regardless. Signed-off-by:
-
Jan Kara authored
commit 14bf61ff upstream. Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> [ luis: backported to 3.16: since 3.16 doesn't contain commit 2451337d ("xfs: global error sign conversion"), return values for functions xfs_qm_scall_setqlim, xfs_fs_get_dqblk and xfs_fs_set_dqblk had to be adjusted. ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Ahmed S. Darwish authored
commit e638642b upstream. While being in an ERROR_WARNING state, and receiving further bus error events with error counters still in the ERROR_WARNING range of 97-127 inclusive, the state handling code erroneously reverts back to ERROR_ACTIVE. Per the CAN standard, only revert to ERROR_ACTIVE when the error counters are less than 96. Moreover, in certain Kvaser models, the BUS_ERROR flag is always set along with undefined bits in the M16C status register. Thus use bitwise operators instead of full equality for checking that register against bus errors. Signed-off-by:
Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
commit 14c10c2a upstream. On some x86 laptops, plugging a Kvaser device again after an unplug makes the firmware always ignore the very first command. For such a case, provide some room for retries instead of completely exiting the driver init code. Signed-off-by:
-
Ahmed S. Darwish authored
commit 3803fa69 upstream. Send expected argument to the URB completion hander: a CAN netdevice instead of the network interface private context `kvaser_usb_net_priv'. This was discovered by having some garbage in the kernel log in place of the netdevice names: can0 and can1. Signed-off-by:
-
Ahmed S. Darwish authored
commit ded50066 upstream. Upon receiving a hardware event with the BUS_RESET flag set, the driver kills all of its anchored URBs and resets all of its transmit URB contexts. Unfortunately it does so under the context of URB completion handler `kvaser_usb_read_bulk_callback()', which is often called in an atomic context. While the device is flooded with many received error packets, usb_kill_urb() typically sleeps/reschedules till the transfer request of each killed URB in question completes, leading to the sleep in atomic bug. [3] In v2 submission of the original driver patch [1], it was stated that the URBs kill and tx contexts reset was needed since we don't receive any tx acknowledgments later and thus such resources will be locked down forever. Fortunately this is no longer needed since an earlier bugfix in this patch series is now applied: all tx URB contexts are reset upon CAN channel close. [2] Moreover, a BUS_RESET is now treated _exactly_ like a BUS_OFF event, which is the recommended handling method advised by the device manufacturer. [1] http://article.gmane.org/gmane.linux.network/239442 http://www.webcitation.org/6Vr2yagAQ [2] can: kvaser_usb: Reset all URB tx contexts upon channel close 889b77f7 [3] Stacktrace: <IRQ> [<ffffffff8158de87>] dump_stack+0x45/0x57 [<ffffffff8158b60c>] __schedule_bug+0x41/0x4f [<ffffffff815904b1>] __schedule+0x5f1/0x700 [<ffffffff8159360a>] ? _raw_spin_unlock_irqrestore+0xa/0x10 [<ffffffff81590684>] schedule+0x24/0x70 [<ffffffff8147d0a5>] usb_kill_urb+0x65/0xa0 [<ffffffff81077970>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff8147d7d8>] usb_kill_anchored_urbs+0x48/0x80 [<ffffffffa01f4028>] kvaser_usb_unlink_tx_urbs+0x18/0x50 [kvaser_usb] [<ffffffffa01f45d0>] kvaser_usb_rx_error+0xc0/0x400 [kvaser_usb] [<ffffffff8108b14a>] ? vprintk_default+0x1a/0x20 [<ffffffffa01f5241>] kvaser_usb_read_bulk_callback+0x4c1/0x5f0 [kvaser_usb] [<ffffffff8147a73e>] __usb_hcd_giveback_urb+0x5e/0xc0 [<ffffffff8147a8a1>] usb_hcd_giveback_urb+0x41/0x110 [<ffffffffa0008748>] finish_urb+0x98/0x180 [ohci_hcd] [<ffffffff810cd1a7>] ? acct_account_cputime+0x17/0x20 [<ffffffff81069f65>] ? local_clock+0x15/0x30 [<ffffffffa000a36b>] ohci_work+0x1fb/0x5a0 [ohci_hcd] [<ffffffff814fbb31>] ? process_backlog+0xb1/0x130 [<ffffffffa000cd5b>] ohci_irq+0xeb/0x270 [ohci_hcd] [<ffffffff81479fc1>] usb_hcd_irq+0x21/0x30 [<ffffffff8108bfd3>] handle_irq_event_percpu+0x43/0x120 [<ffffffff8108c0ed>] handle_irq_event+0x3d/0x60 [<ffffffff8108ec84>] handle_fasteoi_irq+0x74/0x110 [<ffffffff81004dfd>] handle_irq+0x1d/0x30 [<ffffffff81004727>] do_IRQ+0x57/0x100 [<ffffffff8159482a>] common_interrupt+0x6a/0x6a Signed-off-by:
-
Mugunthan V N authored
commit 02a54164 upstream. In Dual EMAC, the default VLANs are used to segregate Rx packets between the ports, so adding the same default VLAN to the switch will affect the normal packet transfers. So returning error on addition of dual EMAC default VLANs. Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to break dual EMAC port separations. Fixes: d9ba8f9e (driver: net: ethernet: cpsw: dual emac interface implementation) Reported-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 45cd15e6 upstream. Array of platform_device_id elements should be terminated with empty element. Fixes: 5bccae6e ("rtc: s5m-rtc: add real-time clock driver for s5m8767") Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Clemens Ladisch authored
commit 0767e95b upstream. When the last subscriber to a "Through" port has been removed, the subscribed destination ports might still be active, so it would be wrong to send "all sounds off" and "reset controller" events to them. The proper place for such a shutdown would be the closing of the actual MIDI port (and close_substream() in rawmidi.c already can do this). This also fixes a deadlock when dummy_unuse() tries to send events to its own port that is already locked because it is being freed. Reported-by:
Peter Billam <peter@www.pjb.com.au> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Rodrigo Vivi authored
commit 6b96d705 upstream. BDW with PCI-IDs ended in "2" aren't ULT, but HALO. Let's fix it and at least allow VGA to work on this units. v2: forgot ammend and v1 doesn't compile Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87220 Cc: Xion Zhang <xiong.y.zhang@intel.com> Cc: Guo Jinxian <jinxianx.guo@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Rodrigo Vivi authored
commit a35cc9d0 upstream. It seems in the past we have BDW with PCH not been propperly identified and we force it to be LPT and we were warning !IS_HASWELL on propper identification. Now that products are out there we are receiveing logs with this incorrect WARN. And also according to local tests on all production BDW here ULT or HALO we don't need this force anymore. So let's clean this block for real. v2: Fix LPT_LP WARNs to avoid wrong warns on BDW_ULT (By Jani). Reference: https://bugs.freedesktop.org/attachment.cgi?id=110972 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Xion Zhang <xiong.y.zhang@intel.com> Signed-off-by:
-
Bob Paauwe authored
commit af1a7301 upstream. When creating a fence for a tiled object, only fence the area that makes up the actual tiles. The object may be larger than the tiled area and if we allow those extra addresses to be fenced, they'll get converted to addresses beyond where the object is mapped. This opens up the possiblity of writes beyond the end of object. To prevent this, we adjust the size of the fence to only encompass the area that makes up the actual tiles. The extra space is considered un-tiled and now behaves as if it was a linear object. Testcase: igt/gem_tiled_fence_overflow Reported-by:
Dan Hettena <danh@ghs.com> Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dmitry Nezhevenko authored
commit bf5c4136 upstream. It looks like FUA support is broken on JMicron 152d:2566 bridge: [223159.885704] sd 7:0:0:0: [sdc] Write Protect is off [223159.885706] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 [223159.885942] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [223283.691677] sd 7:0:0:0: [sdc] [223283.691680] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [223283.691681] sd 7:0:0:0: [sdc] [223283.691682] Sense Key : Illegal Request [current] [223283.691684] sd 7:0:0:0: [sdc] [223283.691685] Add. Sense: Invalid field in cdb [223283.691686] sd 7:0:0:0: [sdc] CDB: [223283.691687] Write(10): 2a 08 15 d0 83 0d 00 00 01 00 [223283.691690] blk_update_request: critical target error, dev sdc, sector 2927892584 This patch adds blacklist flag so that sd will not use FUA Signed-off-by:
Dmitry Nezhevenko <dion@dion.org.ua> Cc: Phil Dibowitz <phil@ipom.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Paul Osmialowski authored
commit 34e81ad5 upstream. This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by:
Paul Osmialowski <p.osmialowsk@samsung.com> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Johannes Berg authored
commit 0fa7b391 upstream. In case userspace attempts to obtain key information for or delete a unicast key, this is currently erroneously rejected unless the driver sets the WIPHY_FLAG_IBSS_RSN flag. Apparently enough drivers do so it was never noticed. Fix that, and while at it fix a potential memory leak: the error path in the get_key() function was placed after allocating a message but didn't free it - move it to a better place. Luckily admin permissions are needed to call this operation. Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Mathy Vanhoef authored
commit 3a5c5e81 upstream. Fix a regression introduced by commit a5e70697 ("mac80211: add radiotap flag and handling for 5/10 MHz") where the IEEE80211_CHAN_CCK channel type flag was incorrectly replaced by the IEEE80211_CHAN_OFDM flag. This commit fixes that by using the CCK flag again. Fixes: a5e70697 ("mac80211: add radiotap flag and handling for 5/10 MHz") Signed-off-by:
Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by:
-
Jochen Hein authored
commit 1d90d6d5 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. With this patch the touchpad is detected: $ dmesg | grep -E "(SYN|i8042|serio)" pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2863, fw id: 1473085 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 dmidecode excerpt for this laptop is: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Medion Product Name: Akoya E7225 Version: 1.0 Signed-off-by:
Jochen Hein <jochen@jochen.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
