Skip to content

L
linux
Switch branch/tag
  1. 24 Sep, 2012 13 commits
  3. 21 Sep, 2012 3 commits
    • Xiao Guangrong's avatar
      perf kvm: Events analysis tool · bcf6edcd
      Xiao Guangrong authored 
      Add 'perf kvm stat' support to analyze kvm vmexit/mmio/ioport smartly

Usage:
- kvm stat
  run a command and gather performance counter statistics, it is the alias of
  perf stat

- trace kvm events:
  perf kvm stat record, or, if other tracepoints are interesting as well, we
  can append the events like this:
  perf kvm stat record -e timer:* -a

  If many guests are running, we can track the specified guest by using -p or
  --pid, -a is used to track events generated by all guests.

- show the result:
  perf kvm stat report

The output example is following:
13005
13059

total 2 guests are running on the host

Then, track the guest whose pid is 13059:
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.253 MB perf.data.guest (~11065 samples) ]

See the vmexit events:

Analyze events for all VCPUs:

             VM-EXIT    Samples  Samples%     Time%         Avg time

         APIC_ACCESS        460    70.55%     0.01%     22.44us ( +-   1.75% )
                 HLT         93    14.26%    99.98% 832077.26us ( +-  10.42% )
  EXTERNAL_INTERRUPT         64     9.82%     0.00%     35.35us ( +-  14.21% )
   PENDING_INTERRUPT         24     3.68%     0.00%      9.29us ( +-  31.39% )
           CR_ACCESS          7     1.07%     0.00%      8.12us ( +-   5.76% )
      IO_INSTRUCTION          3     0.46%     0.00%     18.00us ( +-  11.79% )
       EXCEPTION_NMI          1     0.15%     0.00%      5.83us ( +-   -nan% )

Total Samples:652, Total events handled time:77396109.80us.

See the mmio events:

Analyze events for all VCPUs:

         MMIO Access    Samples  Samples%     Time%         Avg time

        0xfee00380:W        387    84.31%    79.28%      8.29us ( +-   3.32% )
        0xfee00300:W         24     5.23%     9.96%     16.79us ( +-   1.97% )
        0xfee00300:R         24     5.23%     7.83%     13.20us ( +-   3.00% )
        0xfee00310:W         24     5.23%     2.93%      4.94us ( +-   3.84% )

Total Samples:459, Total events handled time:4044.59us.

See the ioport event:

Analyze events for all VCPUs:

      IO Port Access    Samples  Samples%     Time%         Avg time

         0xc050:POUT          3   100.00%   100.00%     13.75us ( +-  10.83% )

Total Samples:3, Total events handled time:41.26us.

And, --vcpu is used to track the specified vcpu and --key is used to sort the
result:

Analyze events for VCPU 0:

             VM-EXIT    Samples  Samples%     Time%         Avg time

                 HLT         27    13.85%    99.97% 405790.24us ( +-  12.70% )
  EXTERNAL_INTERRUPT         13     6.67%     0.00%     27.94us ( +-  22.26% )
         APIC_ACCESS        146    74.87%     0.03%     21.69us ( +-   2.91% )
      IO_INSTRUCTION          2     1.03%     0.00%     17.77us ( +-  20.56% )
           CR_ACCESS          2     1.03%     0.00%      8.55us ( +-   6.47% )
   PENDING_INTERRUPT          5     2.56%     0.00%      6.27us ( +-   3.94% )

Total Samples:195, Total events handled time:10959950.90us.
Signed-off-by: default avatarDong Hao <haodong@linux.vnet.ibm.com>
Signed-off-by: default avatarRunzhen Wang <runzhen@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>
  Runzhen Wang <runzhen@linux.vnet.ibm.com>:
     - rebase it on current acme's tree
     - fix the compiling-error on i386 ]
Signed-off-by: default avatarXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: default avatarDavid Ahern <dsahern@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-4-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      bcf6edcd
    • Xiao Guangrong's avatar
      KVM: x86: Export svm/vmx exit code and vector code to userspace · 26bf264e
      Xiao Guangrong authored 
      Exporting KVM exit information to userspace to be consumed by perf.
Signed-off-by: default avatarDong Hao <haodong@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ]
Signed-off-by: default avatarXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: default avatarMarcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      26bf264e
    • Eric Sandeen's avatar
      perf tools: Fix parallel build · e6048fb8
      Eric Sandeen authored 
      Parallel builds of perf were failing for me on a 32p box, with:

    * new build flags or prefix
util/pmu.l:7:23: error: pmu-bison.h: No such file or directory

...

make: *** [util/pmu-flex.o] Error 1
make: *** Waiting for unfinished jobs....

This can pretty quickly be seen by adding a sleep in front of the bison
calls in tools/perf/Makefile and running make -j4 on a smaller box i.e.:

	sleep 10; $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c

Adding the following dependencies fixes it for me.
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Reviewed-by: default avatarNamhyung Kim <namhyung@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/505BD190.40707@redhat.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      e6048fb8
  5. 20 Sep, 2012 3 commits
  7. 19 Sep, 2012 3 commits
  9. 17 Sep, 2012 12 commits
  11. 15 Sep, 2012 6 commits
    • Oleg Nesterov's avatar
      uprobes: Make arch_uprobe_task->saved_trap_nr "unsigned int" · baedbf02
      Oleg Nesterov authored 
      Make arch_uprobe_task->saved_trap_nr "unsigned int" and move it down
after ->saved_scratch_register, this changes sizeof() from 24 to 16.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      baedbf02
    • Oleg Nesterov's avatar
      uprobes/x86: Fix arch_uprobe_disable_step() && UTASK_SSTEP_TRAPPED interaction · d6a00b35
      Oleg Nesterov authored 
      arch_uprobe_disable_step() should also take UTASK_SSTEP_TRAPPED into
account. In this case the probed insn was not executed, we need to
clear X86_EFLAGS_TF if it was set by us and that is all.

Again, this code will look more clean when we move it into
arch_uprobe_post_xol() and arch_uprobe_abort_xol().
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      d6a00b35
    • Oleg Nesterov's avatar
      uprobes/x86: Xol should send SIGTRAP if X86_EFLAGS_TF was set · 3a4664aa
      Oleg Nesterov authored 
      arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and
returns to user-mode. But this means the application gets SIGTRAP
only after the next insn.

This means that UPROBE_CLEAR_TF logic is not really right. _enable
should only record the state of X86_EFLAGS_TF, and _disable should
check it separately from UPROBE_FIX_SETF.

Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and
change enable/disable accordingly. This assumes that the probed insn
was not trapped, see the next patch.

arch_uprobe_skip_sstep() logic has the same problem, change it to
check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this
all after we fold enable/disable_step into pre/post_hol hooks.

Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap().
But this needs more changes, handle_swbp() does the same and this is
equally wrong.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      3a4664aa
    • Oleg Nesterov's avatar
      uprobes/x86: Do not (ab)use TIF_SINGLESTEP/user_*_single_step() for single-stepping · 9bd1190a
      Oleg Nesterov authored 
      user_enable/disable_single_step() was designed for ptrace, it assumes
a single user and does unnecessary and wrong things for uprobes. For
example:

	- arch_uprobe_enable_step() can't trust TIF_SINGLESTEP, an
	  application itself can set X86_EFLAGS_TF which must be
	  preserved after arch_uprobe_disable_step().

	- we do not want to set TIF_SINGLESTEP/TIF_FORCED_TF in
	  arch_uprobe_enable_step(), this only makes sense for ptrace.

	- otoh we leak TIF_SINGLESTEP if arch_uprobe_disable_step()
	  doesn't do user_disable_single_step(), the application will
	  be killed after the next syscall.

	- arch_uprobe_enable_step() does access_process_vm() we do
	  not need/want.

Change arch_uprobe_enable/disable_step() to set/clear X86_EFLAGS_TF
directly, this is much simpler and more correct. However, we need to
clear TIF_BLOCKSTEP/DEBUGCTLMSR_BTF before executing the probed insn,
add set_task_blockstep(false).

Note: with or without this patch, there is another (hopefully minor)
problem. A probed "pushf" insn can see the wrong X86_EFLAGS_TF set by
uprobes. Perhaps we should change _disable to update the stack, or
teach arch_uprobe_skip_sstep() to emulate this insn.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      9bd1190a
    • Oleg Nesterov's avatar
      ptrace/x86: Partly fix set_task_blockstep()->update_debugctlmsr() logic · 95cf00fa
      Oleg Nesterov authored 
      Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in
step.c was always very wrong.

1. update_debugctlmsr() was simply unneeded. The child sleeps
   TASK_TRACED, __switch_to_xtra(next_p => child) should notice
   TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if
   needed.

2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register
   should always match the state of current's TIF_BLOCKSTEP bit.

3. Even get_debugctlmsr() + update_debugctlmsr() itself does not
   look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR
   register or the caller can be preempted in between.

4. It is not safe to play with TIF_BLOCKSTEP if task != current.
   DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each
   other if the task is running. The tracee is stopped but it
   can be SIGKILL'ed right before set/clear_tsk_thread_flag().

However, now that uprobes uses user_enable_single_step(current)
we can't simply remove update_debugctlmsr(). So this patch adds
the additional "task == current" check and disables irqs to avoid
the race with interrupts/preemption.

Unfortunately this patch doesn't solve the last problem, we need
another fix. Probably we should teach ptrace_stop() to set/clear
single/block stepping after resume.

And afaics there is yet another problem: perf can play with
MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even
__switch_to_xtra() has problems.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      95cf00fa
    • Oleg Nesterov's avatar
      ptrace/x86: Introduce set_task_blockstep() helper · 848e8f5f
      Oleg Nesterov authored 
      No functional changes, preparation for the next fix and for uprobes
single-step fixes.

Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the
new helper, set_task_blockstep().
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      848e8f5f
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7