Given that the plan is to retire Classic SRCU in the near future, this
commit reduces the number of CPUs dedicated to testing Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Currently, the only way to tell whether a given kernel is running
Classic, Tiny, or Tree SRCU is to look at the .config file, which
can easily be lost or associated with the wrong kernel.  This commit
therefore has Classic and Tree SRCU identify themselves at boot time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a TINY rcuperf test scenario, which allows performance
testing of Tiny RCU and Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit changes "architecure" to the correct spelling,
"architecture".
Signed-off-by: Stan Drozd <drozdziak1@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

There is material describing the ordering guarantees provided by
spin_unlock_wait(), but it is not necessarily easy to find.  This commit
therefore adds a docbook header comment to this function informally
describing its semantics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>

This commit explicitly states that surrounding a non-value-returning
atomic read-modify atomic operations provides full ordering, just as
is provided by value-returning atomic read-modify-write operations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a perf_type of "srcud", which species that rcuperf
test SRCU on a dynamically initialized srcu_struct.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

There was a time when the expedited grace-period primitives
(synchronize_rcu_expedited(), synchronize_rcu_bh_expedited(), and
synchronize_sched_expedited()) used rather antisocial kernel
facilities like try_stop_cpus().  However, they have since been
housebroken to use only single-CPU IPIs, and typically cause less
disturbance than a scheduling-clock interrupt.  Furthermore, this
disturbance can be eliminated entirely using NO_HZ_FULL on the
one hand or the rcupdate.rcu_normal boot parameter on the other.

This commit therefore removes checkpatch's complaints about use
of the expedited RCU primitives.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The sync_rcu_preempt_exp_done() function returns a logical expression,
but its return type is nevertheless int.  This commit therefore changes
the return type to bool.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a Kconfig-fragment file for Classic SRCU to ease
performance comparisons with Tree SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit upgrades rcuperf so that it can do performance testing on
asynchronous grace-period primitives such as call_srcu().  There is
a new rcuperf.gp_async module parameter that specifies this new behavior,
with the pre-existing rcuperf.gp_exp testing expedited grace periods such as
synchronize_rcu_expedited, and with the default being to test synchronous
non-expedited grace periods such as synchronize_rcu().

There is also a new rcuperf.gp_async_max module parameter that specifies
the maximum number of outstanding callbacks per writer kthread, defaulting
to 1,000.  When this limit is exceeded, the writer thread invokes the
appropriate flavor of rcu_barrier() to wait for callbacks to drain.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Removed the redundant initialization noted by Arnd Bergmann. ]

The synchronize_kernel() primitive was removed in favor of
synchronize_sched() more than a decade ago, and it seems likely that
rather few kernel hackers are familiar with it.  Its continued presence
is therefore providing more confusion than enlightenment.  This commit
therefore removes the reference from the synchronize_sched() header
comment, and adds the corresponding information to the synchronize_rcu(0
header comment.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The TREE and TREE54 rcuperf scenarios' Kconfig fragment files specified
conflicting values for CONFIG_RCU_TRACE.  This commit therefore removes
the =n line in favor of the =y line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Current rcuperf startup checks to see if the user asked to measure
only expedited grace periods, yet constrained all grace periods to be
normal, or if the user asked to measure only normal grace periods, yet
constrained all grace periods to be expedited.  Useless tests of this
sort are aborted.

Unfortunately, making RCU work through the mid-boot dead zone [1] puts
RCU into expedited-only mode during that zone.  Which happens to also
be the exact time that rcuperf carries out the aforementioned check.
So if the user asks rcuperf to measure only normal grace periods (the
default), rcuperf will now always complain and terminate the test.

This commit therefore moves the checks to rcu_perf_cleanup().  This has
the disadvantage of failing to abort useless tests, but avoids the need to
create yet another kthread and the need to do fiddly checks involving the
holdoff time.  (Yes, another approach is to do the checks in a late-stage
init function, but that would require some way to communicate badness
to rcuperf's kthreads, and seems not worth the bother.)

[1] https://lwn.net/Articles/716148/Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Although preemptible RCU allows its read-side critical sections to be
preempted, general blocking is forbidden.  The reason for this is that
excessive preemption times can be handled by CONFIG_RCU_BOOST=y, but a
voluntarily blocked task doesn't care how high you boost its priority.
Because preemptible RCU is a global mechanism, one ill-behaved reader
hurts everyone.  Hence the prohibition against general blocking in
RCU-preempt read-side critical sections.  Preemption yes, blocking no.

This commit enforces this prohibition.

There is a special exception for the -rt patchset (which they kindly
volunteered to implement):  It is OK to block (as opposed to merely being
preempted) within an RCU-preempt read-side critical section, but only if
the blocking is subject to priority inheritance.  This exception permits
CONFIG_RCU_BOOST=y to get -rt RCU readers out of trouble.

Why doesn't this exception also apply to mainline's rt_mutex?  Because
of the possibility that someone does general blocking while holding
an rt_mutex.  Yes, the priority boosting will affect the rt_mutex,
but it won't help with the task doing general blocking while holding
that rt_mutex.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Earlier versions of Tree SRCU were subject to a counter overflow bug that
could theoretically result in too-short grace periods.  This commit
eliminates this problem by adding an update-side memory barrier.
The short explanation is that if the updater sums the unlock counts
too late to see a given __srcu_read_unlock() increment, that CPU's
next __srcu_read_lock() must see the new value of ->srcu_idx, thus
incrementing the other bank of counters.  This eliminates the possibility
of destructive counter overflow as long as the srcu_read_lock() nesting
level does not exceed floor(ULONG_MAX/NR_CPUS/2), which should be an
eminently reasonable nesting limit, especially on 64-bit systems.
Reported-by: Lance Roy <ldr709@gmail.com>
Suggested-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

A number of the rcutorture test scenarios were not using the desired
Kconfig options because dependencies were preventing the selections in the
Kconfig-fragment files from being honored.  This commit therefore updates
the Kconfig-fragment files to account for these changes in dependencies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcutorture scripting handles the CONFIG_*_TORTURE_TEST Kconfig
options specially, and therefore greps them out of the Kconfig-fragment
files.  Unfortunately, a poor choice of grep pattern means that the
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP, CONFIG_RCU_TORTURE_TEST_SLOW_INIT,
and CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT Kconfig options are also grepped
out, preventing rcutorture from using them.  This commit therefore fixes
the offending grep pattern to focus only on the CONFIG_*_TORTURE_TEST
Kconfig options.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Currently rcu_barrier() uses call_rcu() to enqueue new callbacks
on each CPU with a non-empty callback list.  This works, but means
that rcu_barrier() forces grace periods that are not otherwise needed.
The key point is that rcu_barrier() never needs to wait for a grace
period, but instead only for all pre-existing callbacks to be invoked.
This means that rcu_barrier()'s new callbacks should be placed in
the callback-list segment containing the last pre-existing callback.

This commit makes this change using the new rcu_segcblist_entrain()
function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

A robust combination of paranoia and cowardice has resulted in retaining
Classic SRCU (CONFIG_CLASSIC_SRCU) as a backup for the shiny new Tiny
and Tree SRCU implementations.  If it is to be a viable backup, it of
course needs to be tested.  This commit therefore adds an rcutorture
scenario named SRCU-C for Classic SRCU.  This commit also adds this
scenario to the set that are run by default.

Once sufficient good experience has accumulated for Tiny and Tree SRCU,
this test will be removed, along with the Classic SRCU implementation
itself.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds an SRCU-t rcutorture scenario for the new Tiny SRCU
implementation, removing the need to pass the --bootargs parameter to
kvm.sh to run Tiny SRCU tests.  This commit also adds SRCU-t to the set
of scenarios that are run by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Kconfig "select" clauses can defeat Kconfig-fragment file attempts to
clear a given Kconfig variable, and dependencies can defeat attempts to
set a given Kconfig variable.  Because "select" clauses and dependencies
can be added at any time, there needs to be a way to verify that the
Kconfig-fragment file's requests were honored.  And there is, except
that it is buggy.  This commit therefore provides the needed fix.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a test for a three-level srcu_node tree for Tree SRCU
in the existing SRCU-P scenario.  This requires enabling CONFIG_RCU_EXPERT,
so the CONFIG_RCU_EXPERT=n scenario is now SRCU-N.  The reason for using
SRCU-P for the tall tree is that preemption raises the possibility of
locating more bugs than does the non-preemptive SRCU-N.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Back when SRCU was simpler, there wasn't much need for lockdep.
However, with Tree SRCU, it is needed.  This commit therefore adds
CONFIG_PROVE_LOCKING to the SRCU-P scenario.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device.  This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq().  If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.

The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case.  KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods.  It is
therefore not desirable to switch back to RCU, which would effectively
revert commit 719d93cd ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).

However, the docs are overly conservative.  You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts.  In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU.  For those two implementations, only srcu_read_lock()
is unsafe.

When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit 5a41344a ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller.  Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.

Cc: stable@vger.kernel.org
Fixes: 719d93cd ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING")
Reported-by: Linu Cherian <linuc.decode@gmail.com>
Suggested-by: Linu Cherian <linuc.decode@gmail.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device.  This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq().  If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.

The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case.  KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods.  It is
therefore not desirable to switch back to RCU, which would effectively
revert commit 719d93cd ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).

However, the docs are overly conservative.  You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts.  In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU.  For those two implementations, only srcu_read_lock()
is unsafe.

When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit 5a41344a ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller.  Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.

Unlike Classic and Tree SRCU, Tiny SRCU does increments and decrements on
a single variable.  Therefore, as Peter Zijlstra pointed out, Tiny SRCU's
implementation already supports mixed-context use of srcu_read_lock()
and srcu_read_unlock(), at least as long as uses of srcu_read_lock()
and srcu_read_unlock() in each handler are nested and paired properly.
In other words, it is still illegal to (say) invoke srcu_read_lock()
in an interrupt handler and to invoke the matching srcu_read_unlock()
in a softirq handler.  Therefore, the only change required for Tiny SRCU
is to its comments.

Fixes: 719d93cd ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING")
Reported-by: Linu Cherian <linuc.decode@gmail.com>
Suggested-by: Linu Cherian <linuc.decode@gmail.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>

This fixes a problem with reading files larger than 2GB from a UFS-2
file system:

    https://bugzilla.kernel.org/show_bug.cgi?id=195721

The incorrect UFS s_maxsize limit became a problem as of commit
c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
which started using s_maxbytes to avoid a page index overflow in
do_generic_file_read().

That caused files to be truncated on UFS-2 file systems because the
default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.

Here I simply increase the default to a common value used by other file
systems.
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will B <will.brokenbourgh2877@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfixes from Trond Myklebust:
 "Bugfixes include:

   - Fix a typo in commit e0926934 ("NFS append COMMIT after
     synchronous COPY") that breaks copy offload

   - Fix the connect error propagation in xs_tcp_setup_socket()

   - Fix a lock leak in nfs40_walk_client_list

   - Verify that pNFS requests lie within the offset range of the layout
     segment"

* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Mark unnecessarily extern functions as static
  SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
  NFSv4.0: Fix a lock leak in nfs40_walk_client_list
  pnfs: Fix the check for requests in range of layout segment
  xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
  pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
  NFS fix COMMIT after COPY

Pull tty fix from Greg KH:
 "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
  lot of people reported as causing lockdep and other warnings.

  Right after I reverted this in my tree, it seems like another
  "correct" fix might have shown up, but it's too late in the release
  cycle to be messing with tty core locking, so let's just revert this
  for now to go back how things always have been and try it again for
  4.13.

  This has not been in linux-next as I only reverted it a few hours ago"

* tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: fix port buffer locking"

Pull input subsystem fixes from Dmitry Torokhov:

 - a couple of regression fixes in synaptics and axp20x-pek drivers

 - try to ease transition from PS/2 to RMI for Synaptics touchpad users
   by ensuring we do not try to activate RMI mode when RMI SMBus support
   is not enabled, and nag users a bit to enable it

 - plus a couple of other changes that seemed worthwhile for this
   release

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
  Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
  Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
  Input: synaptics - tell users to report when they should be using rmi-smbus
  Input: synaptics - warn the users when there is a better mode
  Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
  Input: synaptics - clear device info before filling in
  Input: silead - disable interrupt during suspend

Pull RTC fixlet from Alexandre Belloni:
 "A single patch, not really a fix but I don't think there is any reason
  to delay it.

  Change the mailing list address"

* tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  MAINTAINERS: update RTC mailing list

Pull SCSI fixes from James Bottomley:
 "This is nine fixes, seven of which are for the qedi driver (new as of
  4.10) the other two are a use after free in the cxgbi drivers and a
  potential NULL dereference in the rdac device handler"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libcxgbi: fix skb use after free
  scsi: qedi: Fix endpoint NULL panic during recovery.
  scsi: qedi: set max_fin_rt default value
  scsi: qedi: Set firmware tcp msl timer value.
  scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
  scsi: qedi: Set dma_boundary to 0xfff.
  scsi: qedi: Correctly set firmware max supported BDs.
  scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
  scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()

Pull rdma fixes from Doug Ledford:
 "For the most part this is just a minor -rc cycle for the rdma
  subsystem. Even given that this is all of the -rc patches since the
  merge window closed, it's still only about 25 patches:

   - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes

   - A few upper layer protocol fixes (IPoIB, iSER, SRP)

   - A modest number of core fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits)
  RDMA/SA: Fix kernel panic in CMA request handler flow
  RDMA/umem: Fix missing mmap_sem in get umem ODP call
  RDMA/core: not to set page dirty bit if it's already set.
  RDMA/uverbs: Declare local function static and add brackets to sizeof
  RDMA/netlink: Reduce exposure of RDMA netlink functions
  RDMA/srp: Fix NULL deref at srp_destroy_qp()
  RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope
  RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings
  RDMA/qedr: add null check before pointer dereference
  RDMA/mlx5: set UMR wqe fence according to HCA cap
  net/mlx5: Define interface bits for fencing UMR wqe
  RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled
  RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
  RDMA/hfi1: Defer setting VL15 credits to link-up interrupt
  RDMA/hfi1: change PCI bar addr assignments to Linux API functions
  RDMA/hfi1: fix array termination by appending NULL to attr array
  RDMA/iw_cxgb4: fix the calculation of ipv6 header size
  RDMA/iw_cxgb4: calculate t4_eq_status_entries properly
  RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers
  RDMA/nes: ACK MPA Reply frame
  ...

This reverts commit 925bb1ce.

It causes lots of warnings and problems so for now, let's just revert
it.

Reported-by: <valdis.kletnieks@vt.edu>
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.

Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "A couple of patches for the aspeed pwm fan driver"

* tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1
  hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed
  hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT
  hwmon: (aspeed-pwm-tacho) Select REGMAP

Pull MTD fixes from Brian Norris:
 "NAND updates from Boris:

  tango fixes:
   - Add missing MODULE_DEVICE_TABLE() in tango_nand.c
   - Update the number of corrected bitflips

  core fixes:
   - Fix a long standing memory leak in nand_scan_tail()
   - Fix several bugs introduced by the per-vendor init/detection
     infrastructure (introduced in 4.12)
   - Add a static specifier to nand_ooblayout_lp_hamming_ops definition"

* tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd:
  mtd: nand: make nand_ooblayout_lp_hamming_ops static
  mtd: nand: tango: Update ecc_stats.corrected
  mtd: nand: tango: Export OF device ID table as module aliases
  mtd: nand: samsung: warn about un-parseable ECC info
  mtd: nand: free vendor-specific resources in init failure paths
  mtd: nand: drop unneeded module.h include
  mtd: nand: don't leak buffers when ->scan_bbt() fails

Make fan and pwm names in sysfs start with index 1 in accordance to
Documentation/hwmon/sysfs-interface conventions.

Current implementation starts with index 0, making tools such as
sensors(1) skip the first fan.
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Call of_node_put() on a node claimed with of_node_get() or by any other
means such as for_each_child_of_node().
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>