- 22 Nov, 2016 15 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: core: Implement thermal zone Implement thermal zone for mlxsw based HW. The first patch is just a register dependency for the second patch. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
Implement thermal zone for mlxsw based HW. It uses temperature sensor provided by ASIC (the same as mlxsw hwmon interface) to report current temp to thermal core. The ASIC's PWM is then used to control speed of system fans registered as cooling devices. Signed-off-by:
Ivan Vecera <cera@cera.cz> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
The MFSL register is used to configure the fan speed event / interrupt notification mechanism. Fan speed threshold are defined for both under-speed and over-speed. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Start adding support for mv88e6390 This is the first patchset implementing support for the mv88e6390 family. This is a new generation of switch devices and has numerous incompatible changes to the registers. These patches allow the switch to the detected during probe, and makes the statistics unit work. These patches are insufficient to make the mv88e6390 functional. More patches will follow. v2: Move stats code into global1 Change DT compatible string to mv88e6190 Fixed mv88e6351 stats which v1 had broken ==================== Signed-off-by: -
Andrew Lunn authored
Move the stats functions which access global 1 registers into global1.c. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
The mv88e6390 uses a different bit to select between bank0 and bank1 of the statistics. So implement an ops function for this, and pass the selector bit to the generic stats read function. Also, the histogram selection has moved for the mv88e6390, so abstract its selection as well. Signed-off-by:
-
Andrew Lunn authored
Different families have different sets of statistics. Abstract this using a stats_get_stats op. The mv88e6390 needs a different implementation, which will be added later. Signed-off-by:
-
Andrew Lunn authored
Different families have different sets of statistics. Abstract this using a stats_get_sset_count and stats_get_strings op. Each stat has a bitmap, and the ops implementer uses a bit map mask to count the statistics which apply for the family, or return the list of strings. Signed-off-by:
-
Andrew Lunn authored
The statistics unit on the mv88e6390 needs the histogram mode to be configured in a different register compared to other devices. Add an ops to do this. Signed-off-by:
-
Andrew Lunn authored
The MV88E6390 has a control register for what the histogram statistics actually contain. This means the stat_snapshot method should not set this information. So implement the 6390 stats_snapshot function without these bits. Signed-off-by:
-
Andrew Lunn authored
Knowing the family of device belongs to helps with picking the ops implementation which is appropriate to the device. So add a comment to each structure of ops. Signed-off-by:
-
Andrew Lunn authored
Taking a stats snapshot differs between same families. Abstract this into an ops member. At the same time, move the code into global1.[ch], since the registers are in the global1 range. Signed-off-by:
-
Andrew Lunn authored
With the devices added to the tables, the probe will recognize the switch. This however is not sufficient to make it work properly, other changes are needed because of incompatibilities. Signed-off-by:
-
Andrew Lunn authored
_mv88e6xxx_stats_wait() did not check the return value from mv88e6xxx_g1_read(), so the compiler complained about set but unused err. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Andrew Lunn authored
The switch needs to be taken out of reset before we can read its ID register on the MDIO bus. Signed-off-by:
-
- 21 Nov, 2016 25 commits
-
-
Bhumika Goyal authored
Declare the structure ieee802154_ops as const as it is only passed as an argument to the function ieee802154_alloc_hw. This argument is of type const struct ieee802154_ops *, so ieee80254_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct ieee802154_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1; @@ ieee802154_alloc_hw(e1,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct ieee802154_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct ieee802154_ops i; The before and after size details of the affected files are: text data bss dec hex filename 8669 1176 16 9861 2685 drivers/net/ieee802154/adf7242.o 8805 1048 16 9869 268d drivers/net/ieee802154/adf7242.o text data bss dec hex filename 7211 2296 32 9539 2543 drivers/net/ieee802154/atusb.o 7339 2160 32 9531 253b drivers/net/ieee802154/atusb.o Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Acked-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
-
David S. Miller authored
Pravin B Shelar says: ==================== geneve: Use LWT more effectively. Following patch series make use of geneve LWT code path for geneve netdev type of device. This allows us to simplify geneve module without changing any functionality. v2-v3: Rebase against latest net-next. v1-v2: Fix warning reported by kbuild test robot. ==================== Signed-off-by: -
pravin shelar authored
Rather than comparing 64-bit tunnel-id, compare tunnel vni which is 24-bit id. This also save conversion from vni to tunnel id on each tunnel packet receive. Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
pravin shelar authored
Geneve already has check for device socket in route lookup function. So no need to check it in xmit function. Signed-off-by:
-
pravin shelar authored
There are minimal difference in building Geneve header between ipv4 and ipv6 geneve tunnels. Following patch refactors code to unify it. Signed-off-by:
-
pravin shelar authored
Current geneve implementation has two separate cases to handle. 1. netdev xmit 2. LWT xmit. In case of netdev, geneve configuration is stored in various struct geneve_dev members. For example geneve_addr, ttl, tos, label, flags, dst_cache, etc. For LWT ip_tunnel_info is passed to the device in ip_tunnel_info. Following patch uses ip_tunnel_info struct to store almost all of configuration of a geneve netdevice. This allows us to unify most of geneve driver code around ip_tunnel_info struct. This dramatically simplify geneve code, since it does not need to handle two different configuration cases. Removes duplicate code, single code path can handle either type of geneve devices. Signed-off-by:
-
David S. Miller authored
Florian Westphal says: ==================== tcp: make undo_cwnd mandatory for congestion modules highspeed, illinois, scalable, veno and yeah congestion control algorithms don't provide a 'cwnd_undo' function. This makes the stack default to a 'reno undo' which doubles cwnd. However, the ssthresh implementation of these algorithms do not halve the slowstart threshold. This causes similar issue as the one fixed for dctcp in ce6dd233 ("dctcp: avoid bogus doubling of cwnd after loss"). In light of this it seems better to remove the fallback and make undo_cwnd mandatory. First patch fixes those spots where reno undo seems incorrect by providing .cwnd_undo functions, second patch removes the fallback. ==================== Signed-off-by:
-
Florian Westphal authored
The undo_cwnd fallback in the stack doubles cwnd based on ssthresh, which un-does reno halving behaviour. It seems more appropriate to let congctl algorithms pair .ssthresh and .undo_cwnd properly. Add a 'tcp_reno_undo_cwnd' function and wire it up for all congestion algorithms that used to rely on the fallback. Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
congestion control algorithms that do not halve cwnd in their .ssthresh should provide a .cwnd_undo rather than rely on current fallback which assumes reno halving (and thus doubles the cwnd). All of these do 'something else' in their .ssthresh implementation, thus store the cwnd on loss and provide .undo_cwnd to restore it again. A followup patch will remove the fallback and all algorithms will need to provide a .cwnd_undo function. Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: add support for IGMPv3 and MLDv2 querier This patch-set adds support for IGMPv3 and MLDv2 querier in the bridge. Two new options which can be toggled via netlink and sysfs are added that control the version per-bridge: multicast_igmp_version - default 2, can be set to 3 multicast_mld_version - default 1, can be set to 2 (this option is disabled if CONFIG_IPV6=n) Note that the names do not include "querier", I think that these options can be re-used later as more IGMPv3 support is added to the bridge so we can avoid adding more options to switch between v2 and v3 behaviour. The set uses the already existing br_ip{4,6}_multicast_alloc_query functions and adds the appropriate header based on the chosen version. For the initial support I have removed the compatibility implementation (RFC3376 sec 7.3.1, 7.3.2; RFC3810 sec 8.3.1, 8.3.2), because there are some details that we need to sort out. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
This patch adds basic support for MLDv2 queries, the default is MLDv1 as before. A new multicast option - multicast_mld_version, adds the ability to change it between 1 and 2 via netlink and sysfs. The MLD option is disabled if CONFIG_IPV6 is disabled. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
This patch adds basic support for IGMPv3 queries, the default is IGMPv2 as before. A new multicast option - multicast_igmp_version, adds the ability to change it between 2 and 3 via netlink and sysfs. The option struct member is in a 4 byte hole in net_bridge. There also a few minor style adjustments in br_multicast_new_group and br_multicast_add_group. Signed-off-by:
-
Gao Feng authored
The function macvlan_forward_source_one has already checked the flag IFF_UP, so needn't check it outside in macvlan_forward_source too. Signed-off-by:
Gao Feng <gfree.wind@gmail.com> Signed-off-by:
-
Eric Dumazet authored
While stressing a 40Gbit mlx4 NIC with busy polling, I found false sharing in mlx4 driver that can be easily avoided. This patch brings an additional 7 % performance improvement in UDP_RR workload. 1) If we received no frame during one mlx4_en_process_rx_cq() invocation, no need to call mlx4_cq_set_ci() and/or dirty ring->cons 2) Do not refill rx buffers if we have plenty of them. This avoids false sharing and allows some bulk/batch optimizations. Page allocator and its locks will thank us. Finally, mlx4_en_poll_rx_cq() should not return 0 if it determined cpu handling NIC IRQ should be changed. We should return budget-1 instead, to not fool net_rx_action() and its netdev_budget. v2: keep AVG_PERF_COUNTER(... polled) even if polled is 0 Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
barrier() is a big hammer compared to READ_ONCE(), and requires comments explaining what is protected. READ_ONCE() is more precise and compiler should generate better overall code. Signed-off-by:
-
Eric Dumazet authored
UDP_SKB_CB(skb)->partial_cov is located at offset 66 in skb, requesting a cold cache line being read in cpu cache. We can avoid this cache line miss for UDP sockets, as partial_cov has a meaning only for UDPLite. Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Couple of BPF refcount fixes for mlx5 Various mlx5 bugs on eBPF refcount handling found during review. Last patch in series adds a __must_check to BPF helpers to make sure we won't run into it again w/o compiler complaining first. v2 -> v3: - Just reworked patch 2/4 so we don't need bpf_prog_sub(). - Rebased, rest as is. v1 -> v2: - After discussion with Alexei, we agreed upon rebasing the patches against net-next. - Since net-next, I've also added the __must_check to enforce future users to check for errors. - Fixed up commit message #2. - Simplify assignment from patch #1 based on Saeed's feedback on previous set. ==================== Signed-off-by: -
Daniel Borkmann authored
Helpers like bpf_prog_add(), bpf_prog_inc(), bpf_map_inc() can fail with an error, so make sure the caller properly checks their return value and not just ignores it, which could worst-case lead to use after free. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
mlx5e_xdp_set() is currently the only place where we drop reference on the prog sitting in priv->xdp_prog when it's exchanged by a new one. We also need to make sure that we eventually release that reference, for example, in case the netdev is dismantled, otherwise we leak the program. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Daniel Borkmann authored
There are multiple issues in mlx5e_xdp_set(): 1) The batched bpf_prog_add() is currently not checked for errors. When doing so, it should be done at an earlier point in time to makes sure that we cannot fail anymore at the time we want to set the program for each channel. The batched refs short-cut can only be performed when we don't need to perform a reset for changing the rq type and the device was in opened state. In case the device was not in opened state, then the next mlx5e_open_locked() will aquire the refs from the control prog via mlx5e_create_rq(), same when we need to perform a reset. 2) When swapping the priv->xdp_prog, then no extra reference count must be taken since we got that from call path via dev_change_xdp_fd() already. Otherwise, we'd never be able to release the program. Also, bpf_prog_add() without checking the return code could fail. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by:
-
Daniel Borkmann authored
In mlx5e_create_rq(), when creating a new queue, we call bpf_prog_add() but without checking the return value. bpf_prog_add() can fail since 92117d84 ("bpf: fix refcnt overflow"), so we really must check it. Take the reference right when we assign it to the rq from priv->xdp_prog, and just drop the reference on error path. Destruction in mlx5e_destroy_rq() looks good, though. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Fixes for the MV88e6xxx interrupt code The interrupt code was never tested with a board who's probing resulted in an -EPROBE_DEFFERED. So the clean up paths never got tested. I now do have -EPROBE_DEFFERED, and things break badly during cleanup. These are the fixes. This is fixing code in net-next. v2: Fix typo pointed out by David Miller ==================== Signed-off-by: -
Andrew Lunn authored
Freeing interrupts requires switch register access to mask the interrupts. Hence we must hold the register mutex. Signed-off-by:
-
Andrew Lunn authored
It is not possible to use devm_request_threaded_irq() because we have two stacked interrupt controllers in one device. The lower interrupt controller cannot be removed until the upper is fully removed. This happens too late with the devm API, resulting in error messages about removing a domain while there is still an active interrupt. Swap to using request_threaded_irq() and manage the release of the interrupt manually. Signed-off-by:
-
Andrew Lunn authored
On error, remask the interrupts, release all maps, and remove the domain. This cannot be done using the mv88e6xxx_g1_irq_free() because some of these actions are not idempotent. Signed-off-by:
-
