- 13 May, 2013 40 commits
-
-
Wei Yongjun authored
commit c4814202 upstream. Fix to return -ENOMEM in the allocation error case instead of 0 (if pmu_bus_running == 1), as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/CAPgLHd8j_fWcgqe%3DKLWjpBj%2B%3Do0Pw6Z-SEq%3DNTPU08c2w1tngQ@mail.gmail.com [ Tweaked the error code setting placement and the changelog. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Linus Torvalds authored
commit b0b88565 upstream. We first tried to avoid updating atime/mtime entirely (commit b0de59b5: "TTY: do not update atime/mtime on read/write"), and then limited it to only update it occasionally (commit 37b7f3c7: "TTY: fix atime/mtime regression"), but it turns out that this was both insufficient and overkill. It was insufficient because we let people attach to the shared ptmx node to see activity without even reading atime/mtime, and it was overkill because the "only once a minute" means that you can't really tell an idle person from an active one with 'w'. So this tries to fix the problem properly. It marks the shared ptmx node as un-notifiable, and it lowers the "only once a minute" to a few seconds instead - still long enough that you can't time individual keystrokes, but short enough that you can tell whether somebody is active or not. Reported-by:
Simon Kirby <sim@hostway.ca> Acked-by:
Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
commit 37b7f3c7 upstream. In commit b0de59b5 ("TTY: do not update atime/mtime on read/write") we removed timestamps from tty inodes to fix a security issue and waited if something breaks. Well, 'w', the utility to find out logged users and their inactivity time broke. It shows that users are inactive since the time they logged in. To revert to the old behaviour while still preventing attackers to guess the password length, we update the timestamps in one-minute intervals by this patch. Signed-off-by:
-
Jiri Slaby authored
commit b0de59b5 upstream. On http://vladz.devzero.fr/013_ptmx-timing.php, we can see how to find out length of a password using timestamps of /dev/ptmx. It is documented in "Timing Analysis of Keystrokes and Timing Attacks on SSH". To avoid that problem, do not update time when reading from/writing to a TTY. I am afraid of regressions as this is a behavior we have since 0.97 and apps may expect the time to be current, e.g. for monitoring whether there was a change on the TTY. Now, there is no change. So this would better have a lot of testing before it goes upstream. References: CVE-2013-0160 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alex Deucher authored
commit 441e76ca upstream. The code was mis-handling variable sized arrays. Reported-by:
Sylvain BERTRAND <sylware@legeek.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit f8e6bfc2 upstream. If we have a empty power table, bail early and allocate the default power state. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=63865Signed-off-by:
-
Alex Deucher authored
commit beb71fc6 upstream. Reviwed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Robin Holt authored
commit d69f3bad upstream. Trying to run an application which was trying to put data into half of memory using shmget(), we found that having a shmall value below 8EiB-8TiB would prevent us from using anything more than 8TiB. By setting kernel.shmall greater than 8EiB-8TiB would make the job work. In the newseg() function, ns->shm_tot which, at 8TiB is INT_MAX. ipc/shm.c: 458 static int newseg(struct ipc_namespace *ns, struct ipc_params *params) 459 { ... 465 int numpages = (size + PAGE_SIZE -1) >> PAGE_SHIFT; ... 474 if (ns->shm_tot + numpages > ns->shm_ctlall) 475 return -ENOSPC; [akpm@linux-foundation.org: make ipc/shm.c:newseg()'s numpages size_t, not int] Signed-off-by:
Robin Holt <holt@sgi.com> Reported-by:
Alex Thorlton <athorlton@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Greg Thelen authored
commit 421348f1 upstream. Call cond_resched() in shrink_dcache_parent() to maintain interactivity. Before this patch: void shrink_dcache_parent(struct dentry * parent) { while ((found = select_parent(parent, &dispose)) != 0) shrink_dentry_list(&dispose); } select_parent() populates the dispose list with dentries which shrink_dentry_list() then deletes. select_parent() carefully uses need_resched() to avoid doing too much work at once. But neither shrink_dcache_parent() nor its called functions call cond_resched(). So once need_resched() is set select_parent() will return single dentry dispose list which is then deleted by shrink_dentry_list(). This is inefficient when there are a lot of dentry to process. This can cause softlockup and hurts interactivity on non preemptable kernels. This change adds cond_resched() in shrink_dcache_parent(). The benefit of this is that need_resched() is quickly cleared so that future calls to select_parent() are able to efficiently return a big batch of dentry. These additional cond_resched() do not seem to impact performance, at least for the workload below. Here is a program which can cause soft lockup if other system activity sets need_resched(). int main() { struct rlimit rlim; int i; int f[100000]; char buf[20]; struct timeval t1, t2; double diff; /* cleanup past run */ system("rm -rf x"); /* boost nfile rlimit */ rlim.rlim_cur = 200000; rlim.rlim_max = 200000; if (setrlimit(RLIMIT_NOFILE, &rlim)) err(1, "setrlimit"); /* make directory for files */ if (mkdir("x", 0700)) err(1, "mkdir"); if (gettimeofday(&t1, NULL)) err(1, "gettimeofday"); /* populate directory with open files */ for (i = 0; i < 100000; i++) { snprintf(buf, sizeof(buf), "x/%d", i); f[i] = open(buf, O_CREAT); if (f[i] == -1) err(1, "open"); } /* close some of the files */ for (i = 0; i < 85000; i++) close(f[i]); /* unlink all files, even open ones */ system("rm -rf x"); if (gettimeofday(&t2, NULL)) err(1, "gettimeofday"); diff = (((double)t2.tv_sec * 1000000 + t2.tv_usec) - ((double)t1.tv_sec * 1000000 + t1.tv_usec)); printf("done: %g elapsed\n", diff/1e6); return 0; } Signed-off-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Zhao Hongjiang authored
commit 04df32fa upstream. When we run the crackerjack testsuite, the inotify_add_watch test is stalled. This is caused by the invalid mask 0 - the task is waiting for the event but it never comes. inotify_add_watch() should return -EINVAL as it did before commit 676a0675 ("inotify: remove broken mask checks causing unmount to be EINVAL"). That commit removes the invalid mask check, but that check is needed. Check the mask's ALL_INOTIFY_BITS before the inotify_arg_to_mask() call. If none are set, just return -EINVAL. Because IN_UNMOUNT is in ALL_INOTIFY_BITS, this change will not trigger the problem that above commit fixed. [akpm@linux-foundation.org: fix build] Signed-off-by:
Zhao Hongjiang <zhaohongjiang@huawei.com> Acked-by:
Jim Somerville <Jim.Somerville@windriver.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by:
-
NeilBrown authored
commit 486adf72 upstream. Maintenance of a bad-block-list currently defaults to 'enabled' and is then disabled when it cannot be supported. This is backwards and causes problem for dm-raid which didn't know to disable it. So fix the defaults, and only enabled for v1.x metadata which explicitly has bad blocks enabled. The problem with dm-raid has been present since badblock support was added in v3.1, so this patch is suitable for any -stable from 3.1 onwards. Reported-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Derek Basehore authored
commit e005715e upstream. There's a bug where rtc alarms are ignored after the rtc cmos suspends but before the system finishes suspend. Since hpet emulation is disabled and it still handles the interrupts, a wake event is never registered which is done from the rtc layer. This patch reverts commit d1b2efa8 ("rtc: disable hpet emulation on suspend") which disabled hpet emulation. To fix the problem mentioned in that commit, hpet_rtc_timer_init() is called directly on resume. Signed-off-by:
Derek Basehore <dbasehore@chromium.org> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Anurup m authored
commit ec686c92 upstream. There is a kernel memory leak observed when the proc file /proc/fs/fscache/stats is read. The reason is that in fscache_stats_open, single_open is called and the respective release function is not called during release. Hence fix with correct release function - single_release(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101Signed-off-by:
Anurup m <anurup.m@huawei.com> Cc: shyju pv <shyju.pv@huawei.com> Cc: Sanil kumar <sanil.kumar@huawei.com> Cc: Nataraj m <nataraj.m@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Linus Walleij authored
commit 0259d9eb upstream. The UART1 is on the fast AHB bridge, not on the slow bus. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Yogesh Ashok Powar authored
commit 5b0d9b21 upstream. "drivers should call pci_release_region() AFTER calling pci_disable_device()" Please refer section 3.2 Request MMIO/IOP resources in Documentation/PCI/pci.txt Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Yogesh Ashok Powar authored
commit c380aafb upstream. PCI regions are associated with the device using pci_request_region() call. Hence use pci_release_region() instead of pci_release_regions(). Signed-off-by:
-
Heiko Carstens authored
commit 94c16366 upstream. In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Michael Neuling authored
commit 29ce3c50 upstream. In __after_prom_start we copy the kernel down to zero in two calls to copy_and_flush. After the first call (copy from 0 to copy_to_here:) we jump to the newly copied code soon after. Unfortunately there's no isync between the copy of this code and the jump to it. Hence it's possible that stale instructions could still be in the icache or pipeline before we branch to it. We've seen this on real machines and it's results in no console output after: calling quiesce... returning from prom_init The below adds an isync to ensure that the copy and flushing has completed before any branching to the new instructions occurs. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jacob Keller authored
commit d87d8307 upstream. Previously, the ixgbe_msix_other was writing the full 32bits of the set interrupts, instead of only the ones which the ixgbe_msix_other is handling. This resulted in a loss of performance when the X540's PPS feature is enabled due to sometimes clearing queue interrupts which resulted in the driver not getting the interrupt for cleaning the q_vector rings often enough. The fix is to simply mask the lower 16bits off so that this handler does not write them in the EICR, which causes them to remain high and be properly handled by the clean_rings interrupt routine as normal. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit 6f7a05d7 upstream. Vitaliy reported that a per cpu HPET timer interrupt crashes the system during hibernation. What happens is that the per cpu HPET timer gets shut down when the nonboot cpus are stopped. When the nonboot cpus are onlined again the HPET code sets up the MSI interrupt which fires before the clock event device is registered. The event handler is still set to hrtimer_interrupt, which then crashes the machine due to highres mode not being active. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700333 There is no real good way to avoid that in the HPET code. The HPET code alrady has a mechanism to detect spurious interrupts when event handler == NULL for a similar reason. We can handle that in the clockevent/tick layer and replace the previous functional handler with a dummy handler like we do in tick_setup_new_device(). The original clockevents code did this in clockevents_exchange_device(), but that got removed by commit 7c1e7689 (clockevents: prevent clockevent event_handler ending up handler_noop) which forgot to fix it up in tick_shutdown(). Same issue with the broadcast device. Reported-by:
Vitaliy Fillipov <vitalif@yourcmc.ru> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: 700333@bugs.debian.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Takashi Iwai authored
commit 60af3d03 upstream. We've got strange errors in get_ctl_value() in mixer.c during probing, e.g. on Hercules RMX2 DJ Controller: ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4 ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4 .... It turned out that the culprit is autopm: snd_usb_autoresume() returns -ENODEV when called during card->probing = 1. Since the call itself during card->probing = 1 is valid, let's fix the return value of snd_usb_autoresume() as success. Reported-and-tested-by:
Daniel Schürmann <daschuer@mixxx.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Richard Cochran authored
commit cd4baaaa upstream. An early draft of the PHC patch series included an alarm in the gianfar driver. During the review process, the alarm code was dropped, but the capability removal was overlooked. This patch fixes the issue by advertising zero alarms. This patch should be applied to every 3.x stable kernel. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Reported-by:
Chris LaRocque <clarocq@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Mack authored
commit ebfc594c upstream. The USB_DT_CS_ENDPOINT class-specific endpoint descriptor is usually stuffed directly after the standard USB endpoint descriptor, and this is where the driver currently expects it to be. There are, however, devices in the wild that have it the other way around in their descriptor sets, so the USB_DT_CS_ENDPOINT comes *before* the standard enpoint. Devices known to implement it that way are "Sennheiser BTD-500" and Plantronics USB headsets. When the driver can't find the USB_DT_CS_ENDPOINT, it won't be able to change sample rates, as the bitmask for the validity of this command is storen in bmAttributes of that descriptor. Fix this by searching the entire interface instead of just the extra bytes of the first endpoint, in case the latter fails. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
Torstein Hegge <hegge@resisty.net> Reported-and-tested-by:
Yves G <alsa-user@vivigatt.com> Signed-off-by:
-
Adrian Thomasset authored
commit 71d9a2b9 upstream. The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by:
Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by:
-
Michael Ellerman authored
commit 6747e832 upstream. In commit 85fe4025 (fs: do not assign default i_ino in new_inode), the initialisation of i_ino was removed from new_inode() and pushed down into the callers. However spufs_new_inode() was not updated. This exhibits as no files appearing in /spu, because all our dirents have a zero inode, which readdir() seems to dislike. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Mika Kuoppala authored
commit e6637d54 upstream. commit ae128786 Author: Dave Airlie <airlied@redhat.com> Date: Thu Jan 24 16:12:41 2013 +1000 fbcon: don't lose the console font across generic->chip driver switch uses a pointer in vc->vc_font.data to load font into the new driver. However if the font is actually freed, we need to clear the data so that we don't reload font from dangling pointer. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Bryan Schumaker authored
commit bf8d9097 upstream. The seconds field of an nfstime4 structure is 64bit, but we are assuming that the first 32bits are zero-filled. So if the client tries to set atime to a value before the epoch (touch -t 196001010101), then the server will save the wrong value on disk. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Steven A. Falco authored
commit c39e8e43 upstream. The TX_FIFO register is 10 bits wide. The lower 8 bits are the data to be written, while the upper two bits are flags to indicate stop/start. The driver apparently attempted to optimize write access, by only writing a byte in those cases where the stop/start bits are zero. However, we have seen cases where the lower byte is duplicated onto the upper byte by the hardware, which causes inadvertent stop/starts. This patch changes the write access to the transmit FIFO to always be 16 bits wide. Signed off by: Steven A. Falco <sfalco@harris.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Tormod Volden authored
commit 671b4b2b upstream. Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by:
Tormod Volden <debian.tormod@gmail.com> Signed-off-by:
-
Filippo Turato authored
commit d19bf5ce upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by:
Filippo Turato <nnj7585@gmail.com> Signed-off-by:
-
Adrian Thomasset authored
commit 9f06d15f upstream. The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by:
-
Alex Deucher authored
commit dcb85290 upstream. These chips were previously skipped since they are pre-R600. Signed-off-by:
-
Theodore Ts'o authored
commit 7f3e3c7c upstream. Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the change made by commit a0b30c12: ext4: use module parameters instead of debugfs for mballoc_debug Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Trond Myklebust authored
commit 1dfd89af upstream. After a server reboot, the reclaimer thread will recover all the existing locks. For locks that are blocked, however, it will change the value of block->b_status to nlm_lck_denied_grace_period in order to signal that they need to wake up and resend the original blocking lock request. Due to a bug, however, the block->b_status never gets reset after the blocked locks have been woken up, and so the process goes into an infinite loop of resends until the blocked lock is satisfied. Reported-by:
Marc Eshel <eshel@us.ibm.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
David Müller (ELSOFT AG) authored
commit e4bfff54 upstream. As discussed in this thread http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html GMBUS based DVO transmitter detection seems to be unreliable which could result in an unusable DVO port. The attached patch fixes this by falling back to bit banging mode for the time DVO transmitter detection is in progress. Signed-off-by:
David Müller <d.mueller@elsoft.ch> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Emmanuel Grumbach authored
commit 63b77bf4 upstream. When the stations are being restored because of unassoc RXON, the LQ cmd may not have been initialized because it is initialized only after association. Sending zeroed LQ_CMD makes the fw unhappy: it raises SYSASSERT_2078. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> [move zero_lq and make static const] Signed-off-by:
-
Jani Nikula authored
commit dc652f90 upstream. Backlight cleanup in the eDP connector destroy callback caused the backlight device to be removed on some systems that first initialized LVDS and then attempted to initialize eDP. Prevent multiple backlight initializations, and ensure backlight cleanup is only done once by moving it to modeset cleanup. A small wrinkle is the introduced asymmetry in backlight setup/cleanup. This could be solved by adding refcounting, but it seems overkill considering that there should only ever be one backlight device. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55701Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Peter Verthez <peter.verthez@skynet.be> Signed-off-by:
-
Chris Wilson authored
commit 25ff1195 upstream. In order to fully serialize access to the fenced region and the update to the fence register we need to take extreme measures on SNB+, and manually flush writes to memory prior to writing the fence register in conjunction with the memory barriers placed around the register write. Fixes i-g-t/gem_fence_thrash v2: Bring a bigger gun v3: Switch the bigger gun for heavier bullets (Arjan van de Ven) v4: Remove changes for working generations. v5: Reduce to a per-cpu wbinvd() call prior to updating the fences. v6: Rewrite comments to ellide forgotten history. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Tested-by: Jon Bloomfield <jon.bloomfield@intel.com> (v2) Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Hans de Goede authored
commit 1361bf4b upstream. When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by:
Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Dylan Reid authored
commit 98682063 upstream. The hardware revision of the codec is based at 0x40. Subtract that before convering to ASCII. The same as it is done for 98095. Signed-off-by:
Dylan Reid <dgreid@chromium.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
