In preparation for needing them somewhere else, move them and get rid of
the unused 'issue_flags' for the unlock side.

No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

syzbot reports an issue with overflow filling for IOPOLL:

WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0
Workqueue: events_unbound io_ring_exit_work
Call trace:
 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
 io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773
 io_fill_cqe_req io_uring/io_uring.h:168 [inline]
 io_do_iopoll+0x474/0x62c io_uring/rw.c:1065
 io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513
 io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056
 io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869
 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
 worker_thread+0x340/0x610 kernel/workqueue.c:2436
 kthread+0x12c/0x158 kernel/kthread.c:376
 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863

There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.

Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.

Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.

While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.

Cc: stable@vger.kernel.org
Fixes: eb0089d6 ("io_uring: single shot poll removal optimisation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A previous commit split the hash table for polled requests into two
parts, but didn't get the fdinfo output updated. This means that it's
less useful for debugging, as we may think a given request is not pending
poll.

Fix this up by dumping the locked hash table contents too.

Fixes: 9ca9fb24 ("io_uring: mutex locked poll hashing")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we don't, then we may lose access to it completely, leading to a
request leak. This will eventually stall the ring exit process as
well.

Cc: stable@vger.kernel.org
Fixes: 49f1c68e ("io_uring: optimise submission side poll_refs")
Reported-and-tested-by: syzbot+6c95df01470a47fc3af4@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000009f829805f1ce87b2@google.com/Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.

Fixes: af82425c ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in
particular we rearm it anew every time we get into
io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2
CQEs and getting a task_work in the middle may double the timeout value,
or even worse in some cases task may wait indefinitely.

Cc: stable@vger.kernel.org
Fixes: 22833966 ("io_uring: don't convert to jiffies for waiting on timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The cacheline section holding this variable has two gaps, where one is
caused by this bool not packing well with structs. This causes it to
blow into the next cacheline. Move the variable, shrinking io_ring_ctx
by a full cacheline in size.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Locking around CQE posting is complex and depends on options the ring is
created with, add more thorough lockdep annotations checking all
invariants.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aa3770b4eacae3915d782cc2ab2f395a99b4b232.1672795976.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Unlike normal tw, nothing prevents deferred tw to be executed right
after an tw item added to ->work_llist in io_req_local_work_add(). For
instance, the waiting task may get waken up by CQ posting or a normal
tw. Thus we need to pin the ring for the rest of io_req_local_work_add()

Cc: stable@vger.kernel.org
Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1a79362b9c10b8523ef70b061d96523650a23344.1672795998.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.

Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

include/uapi/linux/io_uring.h is synced 1:1 into
liburing:src/include/liburing/io_uring.h.

liburing has a configure check to detect the need for
linux/time_types.h. It can opt-out by defining
UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H

Fixes: 78a861b9 ("io_uring: add sync cancelation API through io_uring_register()")
Link: https://github.com/axboe/liburing/issues/708
Link: https://github.com/axboe/liburing/pull/709
Link: https://lore.kernel.org/io-uring/20221115212614.1308132-1-ammar.faizi@intel.com/T/#m9f5dd571cd4f6a5dee84452dbbca3b92ba7a4091
CC: Jens Axboe <axboe@kernel.dk>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/7071a0a1d751221538b20b63f9160094fc7e06f4.1668630247.git.metze@samba.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we have a signal pending during cancelations, it'll cause the
task_work run to return an error. Since we didn't run task_work, the
current task is left in TASK_INTERRUPTIBLE state when we need to
re-grab the ctx mutex, and the kernel will rightfully complain about
that.

Move the lock grabbing for the error cases outside the loop to avoid
that issue.

Reported-by: syzbot+7df055631cd1be4586fd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000003a14a905f05050b0@google.com/Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we have overflow entries being generated after we've done the
initial flush in io_cqring_wait(), then we could be flushing them in the
main wait loop as well. If that's done after having added ourselves
to the cq_wait waitqueue, then the task state can be != TASK_RUNNING
when we enter the overflow flush.

Check for the need to overflow flush, and finish our wait cycle first
if we have to do so.

Reported-and-tested-by: syzbot+cf6ea1d6bb30a4ce10b2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/000000000000cb143a05f04eee15@google.com/Signed-off-by: Jens Axboe <axboe@kernel.dk>

This header file was introduced in commit c826bd7a ("io_uring: add
set of tracing events"). It didn't get added to the io_uring
maintainers section. Add this header file to the io_uring maintainers
section.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/20221219164521.2481728-1-ammar.faizi@intel.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Don't access io_async_msghdr io_netmsg_recycle(), it may be reallocated.

Cc: stable@vger.kernel.org
Fixes: 9bb66906 ("io_uring: support multishot in recvmsg")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9e326f4ad4046ddadf15bf34bf3fa58c6372f6b5.1671461985.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If we're not allocating the vectors because the count is below
UIO_FASTIOV, we still do need to properly clear ->free_iov to prevent
an erronous free of on-stack data.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Fixes: 4c17a496 ("io_uring/net: fix cleanup double free free_iov init")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's quite possible that we got woken up because task_work was queued,
and we need to process this task_work to generate the events waited for.
If we return to the wait loop without running task_work, we'll end up
adding the task to the waitqueue again, only to call
io_cqring_wait_schedule() again which will run the task_work. This is
less efficient than it could be, as it requires adding to the cq_wait
queue again. It also triggers the wakeup path for completions as
cq_wait is now non-empty with the task itself, and it'll require another
lock grab and deletion to remove ourselves from the waitqueue.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use task_work_pending() as a better test for whether we have task_work
or not, TIF_NOTIFY_SIGNAL is only valid if the any of the task_work
items had been queued with TWA_SIGNAL as the notification mechanism.
Hence task_work_pending() is a more reliable check.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring uses call_rcu in the case it needs to signal an eventfd as a
result of an eventfd signal, since recursing eventfd signals are not
allowed. This should be calling the new call_rcu_hurry API to not delay
the signal.
Signed-off-by: Dylan Yudaken <dylany@meta.com>

Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20221215184138.795576-1-dylany@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Because the single task locking series got reordered ahead of the
timeout and completion lock changes, two hunks inadvertently ended up
using __io_fill_cqe_req() rather than io_fill_cqe_req(). This meant
that we dropped overflow handling in those two spots. Reinstate the
correct CQE filling helper.

Fixes: f66f7342 ("io_uring: skip spinlocking for ->task_complete")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We don't need completion_lock for timeout flushing, don't take it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1e3dc657975ac445b80e7bdc40050db783a5935a.1670002973.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

io_kill_timeouts() doesn't post any events but queues everything to
task_work. Locking there is needed for protecting linked requests
traversing, we should grab completion_lock directly instead of using
io_cq_[un]lock helpers. Same goes for __io_req_find_next_prep().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e75d481a65dc295cb59722bb1cf76402d1c06b.1670002973.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Read cq_timeouts in io_flush_timeouts() only after taking the
timeout_lock, as it's protected by it. There are many places where we
also grab ->completion_lock, but for instance io_timeout_fn() doesn't
and still modifies cq_timeouts.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9c79544dd6cf5c4018cb1bab99cf481a93ea46ef.1670002973.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull MM updates from Andrew Morton:

 - More userfaultfs work from Peter Xu

 - Several convert-to-folios series from Sidhartha Kumar and Huang Ying

 - Some filemap cleanups from Vishal Moola

 - David Hildenbrand added the ability to selftest anon memory COW
   handling

 - Some cpuset simplifications from Liu Shixin

 - Addition of vmalloc tracing support by Uladzislau Rezki

 - Some pagecache folioifications and simplifications from Matthew
   Wilcox

 - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
   it

 - Miguel Ojeda contributed some cleanups for our use of the
   __no_sanitize_thread__ gcc keyword.

   This series should have been in the non-MM tree, my bad

 - Naoya Horiguchi improved the interaction between memory poisoning and
   memory section removal for huge pages

 - DAMON cleanups and tuneups from SeongJae Park

 - Tony Luck fixed the handling of COW faults against poisoned pages

 - Peter Xu utilized the PTE marker code for handling swapin errors

 - Hugh Dickins reworked compound page mapcount handling, simplifying it
   and making it more efficient

 - Removal of the autonuma savedwrite infrastructure from Nadav Amit and
   David Hildenbrand

 - zram support for multiple compression streams from Sergey Senozhatsky

 - David Hildenbrand reworked the GUP code's R/O long-term pinning so
   that drivers no longer need to use the FOLL_FORCE workaround which
   didn't work very well anyway

 - Mel Gorman altered the page allocator so that local IRQs can remnain
   enabled during per-cpu page allocations

 - Vishal Moola removed the try_to_release_page() wrapper

 - Stefan Roesch added some per-BDI sysfs tunables which are used to
   prevent network block devices from dirtying excessive amounts of
   pagecache

 - David Hildenbrand did some cleanup and repair work on KSM COW
   breaking

 - Nhat Pham and Johannes Weiner have implemented writeback in zswap's
   zsmalloc backend

 - Brian Foster has fixed a longstanding corner-case oddity in
   file[map]_write_and_wait_range()

 - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
   Chen

 - Shiyang Ruan has done some work on fsdax, to make its reflink mode
   work better under xfstests. Better, but still not perfect

 - Christoph Hellwig has removed the .writepage() method from several
   filesystems. They only need .writepages()

 - Yosry Ahmed wrote a series which fixes the memcg reclaim target
   beancounting

 - David Hildenbrand has fixed some of our MM selftests for 32-bit
   machines

 - Many singleton patches, as usual

* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
  mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
  mm: mmu_gather: allow more than one batch of delayed rmaps
  mm: fix typo in struct pglist_data code comment
  kmsan: fix memcpy tests
  mm: add cond_resched() in swapin_walk_pmd_entry()
  mm: do not show fs mm pc for VM_LOCKONFAULT pages
  selftests/vm: ksm_functional_tests: fixes for 32bit
  selftests/vm: cow: fix compile warning on 32bit
  selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
  mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
  mm,thp,rmap: fix races between updates of subpages_mapcount
  mm: memcg: fix swapcached stat accounting
  mm: add nodes= arg to memory.reclaim
  mm: disable top-tier fallback to reclaim on proactive reclaim
  selftests: cgroup: make sure reclaim target memcg is unprotected
  selftests: cgroup: refactor proactive reclaim code to reclaim_until()
  mm: memcg: fix stale protection of reclaim target memcg
  mm/mmap: properly unaccount memory on mas_preallocate() failure
  omfs: remove ->writepage
  jfs: remove ->writepage
  ...

Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...

Pull Xtensa updates from Max Filippov:

 - fix kernel build with gcc-13

 - various minor fixes

* tag 'xtensa-20221213' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add __umulsidi3 helper
  xtensa: update config files
  MAINTAINERS: update the 'T:' entry for xtensa

Pull ARM updates from Russell King:

 - update unwinder to cope with module PLTs

 - enable UBSAN on ARM

 - improve kernel fault message

 - update UEFI runtime page tables dump

 - avoid clang's __aeabi_uldivmod generated in NWFPE code

 - disable FIQs on CPU shutdown paths

 - update XOR register usage

 - a number of build updates (using .arch, thread pointer, removal of
   lazy evaluation in Makefile)

 - conversion of stacktrace code to stackwalk

 - findbit assembly updates

 - hwcap feature updates for ARMv8 CPUs

 - instruction dump updates for big-endian platforms

 - support for function error injection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
  ARM: 9279/1: support function error injection
  ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
  ARM: 9276/1: Refactor dump_instr()
  ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
  ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
  ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
  ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
  ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
  ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
  ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
  ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
  ARM: 9267/1: Define Armv8 registers in AArch32 state
  ARM: findbit: add unwinder information
  ARM: findbit: operate by words
  ARM: findbit: convert to macros
  ARM: findbit: provide more efficient ARMv7 implementation
  ARM: findbit: document ARMv5 bit offset calculation
  ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
  ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
  ARM: 9265/1: pass -march= only to compiler
  ...

Pull x86 sev updates from Borislav Petkov:

 - Two minor fixes to the sev-guest driver

* tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt/sev-guest: Add a MODULE_ALIAS
  virt/sev-guest: Remove unnecessary free in init_crypto()

Pull x86 paravirt update from Borislav Petkov:

 - Simplify paravirt patching machinery by removing the now unused
   clobber mask

* tag 'x86_paravirt_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Remove clobber bitmask from .parainstructions

Pull x86 microcode and IFS updates from Borislav Petkov:
 "The IFS (In-Field Scan) stuff goes through tip because the IFS driver
  uses the same structures and similar functionality as the microcode
  loader and it made sense to route it all through this branch so that
  there are no conflicts.

   - Add support for multiple testing sequences to the Intel In-Field
     Scan driver in order to be able to run multiple different test
     patterns. Rework things and remove the BROKEN dependency so that
     the driver can be enabled (Jithu Joseph)

   - Remove the subsys interface usage in the microcode loader because
     it is not really needed

   - A couple of smaller fixes and cleanups"

* tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/microcode/intel: Do not retry microcode reloading on the APs
  x86/microcode/intel: Do not print microcode revision and processor flags
  platform/x86/intel/ifs: Add missing kernel-doc entry
  Revert "platform/x86/intel/ifs: Mark as BROKEN"
  Documentation/ABI: Update IFS ABI doc
  platform/x86/intel/ifs: Add current_batch sysfs entry
  platform/x86/intel/ifs: Remove reload sysfs entry
  platform/x86/intel/ifs: Add metadata validation
  platform/x86/intel/ifs: Use generic microcode headers and functions
  platform/x86/intel/ifs: Add metadata support
  x86/microcode/intel: Use a reserved field for metasize
  x86/microcode/intel: Add hdr_type to intel_microcode_sanity_check()
  x86/microcode/intel: Reuse microcode_sanity_check()
  x86/microcode/intel: Use appropriate type in microcode_sanity_check()
  x86/microcode/intel: Reuse find_matching_signature()
  platform/x86/intel/ifs: Remove memory allocation from load path
  platform/x86/intel/ifs: Remove image loading during init
  platform/x86/intel/ifs: Return a more appropriate error code
  platform/x86/intel/ifs: Remove unused selection
  x86/microcode: Drop struct ucode_cpu_info.valid
  ...

Pull x86 cpu updates from Borislav Petkov:

 - Split MTRR and PAT init code to accomodate at least Xen PV and TDX
   guests which do not get MTRRs exposed but only PAT. (TDX guests do
   not support the cache disabling dance when setting up MTRRs so they
   fall under the same category)

   This is a cleanup work to remove all the ugly workarounds for such
   guests and init things separately (Juergen Gross)

 - Add two new Intel CPUs to the list of CPUs with "normal" Energy
   Performance Bias, leading to power savings

 - Do not do bus master arbitration in C3 (ARB_DISABLE) on modern
   Centaur CPUs

* tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/mtrr: Make message for disabled MTRRs more descriptive
  x86/pat: Handle TDX guest PAT initialization
  x86/cpuid: Carve out all CPUID functionality
  x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV
  x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
  x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack()
  x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode()
  x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h
  x86/acpi/cstate: Optimize ARB_DISABLE on Centaur CPUs
  x86/mtrr: Simplify mtrr_ops initialization
  x86/cacheinfo: Switch cache_ap_init() to hotplug callback
  x86: Decouple PAT and MTRR handling
  x86/mtrr: Add a stop_machine() handler calling only cache_cpu_init()
  x86/mtrr: Let cache_aps_delayed_init replace mtrr_aps_delayed_init
  x86/mtrr: Get rid of __mtrr_enabled bool
  x86/mtrr: Simplify mtrr_bp_init()
  x86/mtrr: Remove set_all callback from struct mtrr_ops
  x86/mtrr: Disentangle MTRR init from PAT init
  x86/mtrr: Move cache control code to cacheinfo.c
  x86/mtrr: Split MTRR-specific handling from cache dis/enabling
  ...

Pull x86 boot updates from Borislav Petkov:
 "A  of early boot cleanups and fixes.

   - Do some spring cleaning to the compressed boot code by moving the
     EFI mixed-mode code to a separate compilation unit, the AMD memory
     encryption early code where it belongs and fixing up build
     dependencies. Make the deprecated EFI handover protocol optional
     with the goal of removing it at some point (Ard Biesheuvel)

   - Skip realmode init code on Xen PV guests as it is not needed there

   - Remove an old 32-bit PIC code compiler workaround"

* tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Remove x86_32 PIC using %ebx workaround
  x86/boot: Skip realmode init code when running as Xen PV guest
  x86/efi: Make the deprecated EFI handover protocol optional
  x86/boot/compressed: Only build mem_encrypt.S if AMD_MEM_ENCRYPT=y
  x86/boot/compressed: Adhere to calling convention in get_sev_encryption_bit()
  x86/boot/compressed: Move startup32_check_sev_cbit() out of head_64.S
  x86/boot/compressed: Move startup32_check_sev_cbit() into .text
  x86/boot/compressed: Move startup32_load_idt() out of head_64.S
  x86/boot/compressed: Move startup32_load_idt() into .text section
  x86/boot/compressed: Pull global variable reference into startup32_load_idt()
  x86/boot/compressed: Avoid touching ECX in startup32_set_idt_entry()
  x86/boot/compressed: Simplify IDT/GDT preserve/restore in the EFI thunk
  x86/boot/compressed, efi: Merge multiple definitions of image_offset into one
  x86/boot/compressed: Move efi32_pe_entry() out of head_64.S
  x86/boot/compressed: Move efi32_entry out of head_64.S
  x86/boot/compressed: Move efi32_pe_entry into .text section
  x86/boot/compressed: Move bootargs parsing out of 32-bit startup code
  x86/boot/compressed: Move 32-bit entrypoint code into .text section
  x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S

Pull x86 asm updates from Borislav Petkov:

 - Move the 32-bit memmove() asm implementation out-of-line in order to
   fix a 32-bit full LTO build failure with clang where it would fail at
   register allocation.

   Move it to an asm file and clean it up while at it, similar to what
   has been already done on 64-bit

* tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem: Move memmove to out of line assembler

Pull EFI updates from Ard Biesheuvel:
 "Another fairly sizable pull request, by EFI subsystem standards.

  Most of the work was done by me, some of it in collaboration with the
  distro and bootloader folks (GRUB, systemd-boot), where the main focus
  has been on removing pointless per-arch differences in the way EFI
  boots a Linux kernel.

   - Refactor the zboot code so that it incorporates all the EFI stub
     logic, rather than calling the decompressed kernel as a EFI app.

   - Add support for initrd= command line option to x86 mixed mode.

   - Allow initrd= to be used with arbitrary EFI accessible file systems
     instead of just the one the kernel itself was loaded from.

   - Move some x86-only handling and manipulation of the EFI memory map
     into arch/x86, as it is not used anywhere else.

   - More flexible handling of any random seeds provided by the boot
     environment (i.e., systemd-boot) so that it becomes available much
     earlier during the boot.

   - Allow improved arch-agnostic EFI support in loaders, by setting a
     uniform baseline of supported features, and adding a generic magic
     number to the DOS/PE header. This should allow loaders such as GRUB
     or systemd-boot to reduce the amount of arch-specific handling
     substantially.

   - (arm64) Run EFI runtime services from a dedicated stack, and use it
     to recover from synchronous exceptions that might occur in the
     firmware code.

   - (arm64) Ensure that we don't allocate memory outside of the 48-bit
     addressable physical range.

   - Make EFI pstore record size configurable

   - Add support for decoding CXL specific CPER records"

* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
  arm64: efi: Recover from synchronous exceptions occurring in firmware
  arm64: efi: Execute runtime services from a dedicated stack
  arm64: efi: Limit allocations to 48-bit addressable physical region
  efi: Put Linux specific magic number in the DOS header
  efi: libstub: Always enable initrd command line loader and bump version
  efi: stub: use random seed from EFI variable
  efi: vars: prohibit reading random seed variables
  efi: random: combine bootloader provided RNG seed with RNG protocol output
  efi/cper, cxl: Decode CXL Error Log
  efi/cper, cxl: Decode CXL Protocol Error Section
  efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
  efi: x86: Move EFI runtime map sysfs code to arch/x86
  efi: runtime-maps: Clarify purpose and enable by default for kexec
  efi: pstore: Add module parameter for setting the record size
  efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
  efi: memmap: Move manipulation routines into x86 arch tree
  efi: memmap: Move EFI fake memmap support into x86 arch tree
  efi: libstub: Undeprecate the command line initrd loader
  efi: libstub: Add mixed mode support to command line initrd loader
  efi: libstub: Permit mixed mode return types other than efi_status_t
  ...

Pull integrity updates from Mimi Zohar:
 "Aside from the one cleanup, the other changes are bug fixes:

  Cleanup:

   - Include missing iMac Pro 2017 in list of Macs with T2 security chip

  Bug fixes:

   - Improper instantiation of "encrypted" keys with user provided data

   - Not handling delay in updating LSM label based IMA policy rules
     (-ESTALE)

   - IMA and integrity memory leaks on error paths

   - CONFIG_IMA_DEFAULT_HASH_SM3 hash algorithm renamed"

* tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Fix hash dependency to correct algorithm
  ima: Fix misuse of dereference of pointer in template_desc_init_fields()
  integrity: Fix memory leakage in keyring allocation error path
  ima: Fix memory leak in __ima_inode_hash()
  ima: Handle -ESTALE returned by ima_filter_rule_match()
  ima: Simplify ima_lsm_copy_rule
  ima: Fix a potential NULL pointer access in ima_restore_measurement_list
  efi: Add iMac Pro 2017 to uefi skip cert quirk
  KEYS: encrypted: fix key instantiation with user-provided data

Pull sysctl updates from Luis Chamberlain:
 "Only a small step forward on the sysctl cleanups for this cycle"

* tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sched: Move numa_balancing sysctls to its own file

Pull modules updates from Luis Chamberlain:
 "Tux gets for xmas an improvement to the average lookup performance of
  kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which
  upgraded our old implementation from being O(n) to O(log(n)), while
  also retaining the old implementation support on /proc/kallsyms.

  The only penalty was increasing the memory footprint by 3 *
  kallsyms_num_syms. Folks who want to improve this further now also
  have a dedicated selftest facility through KALLSYMS_SELFTEST.

  Stephen Boyd added zstd in-kernel decompression support, but the only
  users of this would be folks using the load-pin LSM because otherwise
  we do module decompression in userspace.

  The only other thing with mentioning is a minor boot time optimization
  by Rasmus Villemoes which deferes param_sysfs_init() to late init. The
  rest is cleanups and minor fixes"

* tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication
  module/decompress: Support zstd in-kernel decompression
  kallsyms: Remove unneeded semicolon
  kallsyms: Add self-test facility
  livepatch: Use kallsyms_on_each_match_symbol() to improve performance
  kallsyms: Add helper kallsyms_on_each_match_symbol()
  kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[]
  kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y
  kallsyms: Improve the performance of kallsyms_lookup_name()
  scripts/kallsyms: rename build_initial_tok_table()
  module: Fix NULL vs IS_ERR checking for module_get_next_page
  kernel/params.c: defer most of param_sysfs_init() to late_initcall time
  module: Remove unused macros module_addr_min/max
  module: remove redundant module_sysfs_initialized variable

Pull clk driver updates from Stephen Boyd:
 "A pile of clk driver updates with a small tracepoint patch to the clk
  core this time around.

  The core framework is effectively unchanged, with the majority of the
  diff going to the Qualcomm clk driver directory because they added two
  3k line files that are almost all clk data (Abel Vesa from Linaro
  tried to shrink the number of lines down, but it doesn't seem to be
  possible without sacrificing readability).

  The second big driver this time around is the Rockchip rk3588 clk and
  reset unit, at _only_ 2.5k lines.

  Ignoring the big clk drivers from the familiar SoC vendors, there's
  just a bunch of little clk driver updates and fixes throughout here.

  It's the usual set of clk data fixups to describe proper parents, or
  add frequencies to frequency tables, or plug memory leaks when
  function calls fail. Also, some drivers are converted to use modern
  clk_hw APIs, which is always nice to see. And data is deduplicated,
  leading to a smaller kernel Image.

  Overall this batch has a larger collection of cleanups than it
  typically does. Maybe that means there are less new SoCs right now
  that need supporting, and the focus has shifted to quality and
  reliability. I can dream.

  New Drivers:
   - Frequency hopping controller hardware on MediaTek MT8186
   - Global clock controller for Qualcomm SM8550
   - Display clock controller for Qualcomm SC8280XP
   - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
   - CPU PLL on MStar/SigmaStar SoCs
   - Support for the clock and reset unit of the Rockchip rk3588

  Updates:
   - Tracepoints for clk_rate_request structures
   - Debugfs support for fractional divider clk
   - Make MxL's CGU driver secure compatible
   - Ingenic JZ4755 SoC clk support
   - Support audio clks on X1000 SoCs
   - Remove flags from univ/main/syspll child fixed factor clocks across
     MediaTek platforms
   - Fix clock dependency for ADC on MediaTek MT7986
   - Fix parent for FlexSPI clock for i.MX93
   - Add USB suspend clock on i.MX8MP
   - Unmap anatop base on error for i.MX93 driver
   - Change enet clock parent to wakeup_axi_root for i.MX93
   - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
   - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
   - Add 320MHz and 640MHz entries to PLL146x
   - Add audio shared gate and SAI clocks for i.MX8MP
   - Fix a possible memory leak in the error path of rockchip PLL
     creation
   - Fix header guard for V3S clocks
   - Add IR module clock for f1c100s
   - Correct the parent clocks for the (High Speed) Serial Communication
     Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
     Switch clocks on Renesas R-Car S4-8
   - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
     R-Car V4H
   - Two PLL driver fixups for the Amlogic clk driver
   - Round SD clock rate to improve parent clock selection
   - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
     S4-8
   - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
     serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
     (RPC-IF) clocks on Renesas R-Car V4H
   - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
     Renesas RZ/G2L
   - Fix endless loop on Renesas RZ/N1
   - Correct the parent clocks for the High Speed Serial Communication
     Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
     Note: HSCIF0 is used for the serial console on the White-Hawk
     development board
   - Various clk DT binding improvements and conversions to YAML
   - Qualcomm SM8150/SM8250 display clock controller cleaned up
   - Some missing clocks for Qualcomm SM8350 added
   - Qualcomm MSM8974 Global and Multimedia clock controllers
     transitioned to parent_data and parent_hws
   - Use parent_data and add network resets for Qualcomm IPQ8074
   - Qualcomm Krait clock controller modernized
   - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
     controllers
   - Enable retention mode on Qualcomm SM8250 USB GDSCs
   - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
     clocks which definition could be shared between platforms
   - Various NULL pointer checks added for allocations"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
  clk: nomadik: correct struct name kernel-doc warning
  clk: lmk04832: fix kernel-doc warnings
  clk: lmk04832: drop superfluous #include
  clk: lmk04832: drop unnecessary semicolons
  clk: lmk04832: declare variables as const when possible
  clk: socfpga: Fix memory leak in socfpga_gate_init()
  clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
  clk: st: Fix memory leak in st_of_quadfs_setup()
  clk: samsung: Fix memory leak in _samsung_clk_register_pll()
  clk: Add trace events for rate requests
  clk: Store clk_core for clk_rate_request
  clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
  clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: mmcc-msm8974: move clock parent tables down
  clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: gcc-msm8974: move clock parent tables down
  clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
  dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
  ...