The packet manager is not needed for non HWS mode except Hawaii, so only
initialize it for Hawaii under non HWS mode. This will simplify debugging
under non HWS mode for all new asics, because it eliminates one variable
out of the equation in non HWS mode
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The dozens of printing messages are compressed into 2 lines.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The message will be useful when troubleshooting the issues.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use proper helper for 32 bit.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise non-autoload case will go into the wrong routine and fail.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For better clarification of issue.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Front door firmware loading is done via the psp rather than the
driver.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Needs more work to enable via front door loading.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

load different cp firmware according to the DID and RID
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.

v2 (Felix Kuehling):
* Fix compile error (kfifo_free instead of fifo_free)
* Return proper error code
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new sections to amdgpu.rst, fix up formatting issues,
add additional documentation to each section.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix DOC link name, clean up formatting in pp_dpm_* section.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix parameters.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Missing parameters, wrong comment type, etc.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Document the new parameter.

Fixes: 93065ac7 ("mm, oom: distinguish blockable mode for mmu notifiers")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop extra function parameter.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We had a couple of missing definitions and formatting errors.

v2: Fix 'notifying' type
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc warning:

drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:431: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:550: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_enable_clock_gating'

Fixes: cbead2bd ("drm/amdgpu: add VCN2.5 VCPU start and stop")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Without CONFIG_DEBUG_FS, we get a warning for an unused
variable:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6020:33: error: unused variable 'source' [-Werror,-Wunused-variable]

Hide the variable in an #ifdef like its only users.

Fixes: 14b25846 ("drm/amd/display: add functionality to grab DPRX CRC entries.")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable full ras by default, user does not need to enable it by
boot parameter.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add Navi12 PCI id support.

v2: flag as experimental for now (Alex)
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update registers: mmUTCL1_CTRL
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update registers: mmUTCL1_CTRL
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can remove this later as things get closer to launch.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise we may get stale data.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need to make sure the fifo is flushed before we ask the psp to
process the commands.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No need to define the same variables in each loop of the function.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

null ptr should be checked first to avoid null ptr access
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For ASICs like renoir/arct, driver doesn't need to load mec2 jt.
when mec1 jt is loaded, mec2 jt will be loaded automatically
since the write is actaully broadcasted to both.

We need to more time to test other gfx9 asic. but for now we should
be able to draw conclusion that mec2 jt is not needed for renoir and
arct.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable psp block for firmware loading and other security
feature setup.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Laptops with AMD APU doesn't restore display backlight brightness after
system resume.

This issue started when DC was introduced.

Let's use BL_CORE_SUSPENDRESUME so the backlight core calls
update_status callback after system resume to restore the backlight
level.

Tested on Dell Inspiron 3180 (Stoney Ridge) and Dell Latitude 5495
(Raven Ridge).
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We are reserving vram pages so they should be aligned to the
GPU page size.
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

except soc_bounding_box which is not integrated in discovery table yet
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

umc retired page belongs to vram and it should be aligned to gpu page
size
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCN Gate/Ungate by processing the SMU power up/down message, otherwise
S3 will resume failed as JPEG always power off during start VCN stage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add Navi12 PCI id support.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There are two cases of reserve error should be ignored:
1) a ras bad page has been allocated (used by someone);
2) a ras bad page has been reserved (duplicate error injection for one page);

DRM_ERROR is unnecessary for the failure of bad page reserve
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some of the documentation formatting could be improved
which will resolve some Sphinx amdgpu build warnings e.g

WARNING: Unexpected indentation.
WARNING: Block quote ends without a blank line; unexpected unindent.
WARNING: Inline emphasis start-string without end-string.
Signed-off-by: Adam Zerella <adam.zerella@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new parameters.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>