- 18 Oct, 2007 40 commits
-
-
Eric Sandeen authored
setup_new_group_blocks() manipulates the group descriptor block bh under the block_bitmap bh's lock. It shouldn't matter since nobody but resize should be touching these blocks, but it's worth fixing up. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> C: <linux-ext4@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Sato authored
This patch set supports large block size(>4k, <=64k) in ext3 just enlarging the block size limit. But it is NOT possible to have 64kB blocksize on ext3 without some changes to the directory handling code. The reason is that an empty 64kB directory block would have a rec_len == (__u16)2^16 == 0, and this would cause an error to be hit in the filesystem. The proposed solution is treat 64k rec_len with a an impossible value like rec_len = 0xffff to handle this. The Patch-set consists of the following 2 patches. [1/2] ext3: enlarge blocksize - Allow blocksize up to pagesize [2/2] ext3: fix rec_len overflow - prevent rec_len from overflow with 64KB blocksize Now on 64k page ppc64 box runs with this patch set we could create a 64k block size ext3, and able to handle empty directory block. Signed-off-by:Takashi Sato <sho@tnes.nec.co.jp> Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Andi Drebes authored
Remove the hardcoded value 256 in fs/cramfs/inode.c and replaces it with CRAMFS_MAXPATHLEN. Tested on an i386 box. Signed-off-by:
Andi Drebes <lists-receive@programmierforen.de> Signed-off-by:
-
Andi Drebes authored
Remove a variable that is never read. Signed-off-by:
-
Nick Piggin authored
Convert bit_spin_lock to new locking bitops. Slub can use the non-atomic store version to clear (Christoph?) Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Nick Piggin authored
Add non-trivial lock bitops implementation for powerpc. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Nick Piggin authored
mips can avoid one mb when acquiring a lock with test_and_set_bit_lock. Signed-off-by:
-
Nick Piggin authored
Documentation/atomic_ops.txt defines these primitives must contain a memory barrier both before and after their memory operation. This is consistent with the atomic ops implementation on mips. Signed-off-by:
-
Nick Piggin authored
Convert ia64 to new bitops. Signed-off-by:
-
Nick Piggin authored
Alpha can avoid one mb when acquiring a lock with test_and_set_bit_lock. [bunk@kernel.org: alpha bitops.h must #include <asm/barrier.h>] Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Nick Piggin authored
Documentation/atomic_ops.txt defines these primitives must contain a memory barrier both before and after their memory operation. This is consistent with the atomic ops implementation on alpha. Signed-off-by:
-
Nick Piggin authored
Introduce test_and_set_bit_lock / clear_bit_unlock bitops with lock semantics. Convert all architectures to use the generic implementation. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Andi Kleen <ak@muc.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Satyam Sharma authored
msr_class_cpu_callback() can be marked __cpuinit, being the notifier callback for a __cpuinitdata notifier_block. So can be marked msr_device_create() too, called only from the newly-__cpuinit msr_class_cpu_callback() or from __init-marked msr_init(). Signed-off-by:
Satyam Sharma <satyam@infradead.org> Cc: Andi Kleen <ak@suse.de> Acked-by:
H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Satyam Sharma authored
The return of the present "do {} while" based stub definition of register_hotcpu_notifier() cannot be checked. This makes the stub asymmetric w.r.t. the real HOTPLUG_CPU=y implementation that is int-returning. So let us redefine this to be consistent with the full version. Also do the same for unregister_hotcpu_notifier(). We cannot define these as static inline functions due to an existing GCC bug (#33172). So define as macros that return appropriately instead (int '0' for the register_hotcpu_notifier case and void for unregister_hotcpu_notifier). Signed-off-by: -
Michael Neuling authored
This adds POWERPC specific hooks for scaled time accounting. POWER6 includes a SPURR register. The SPURR is based off the PURR register but is scaled based on CPU frequency and issue rates. This gives a more accurate account of the instructions used per task. The PURR and timebase will be constant relative to the wall clock, irrespective of the CPU frequency. This implementation reads the SPURR register in account_system_vtime which is only call called on context witch and hard and soft irq entry and exit. The percentage of user and system time is then estimated using the ratio of these accounted by the PURR. If the SPURR is not present, the PURR read. An earlier implementation of this patch read the SPURR whenever the PURR was read, which included the system call entry and exit path. Unfortunately this showed a performance regression on lmbench runs, so was re-implemented. I've included the lmbench results here when run bare metal on POWER6. 1st column is the unpatch results. 2nd column is the results using the below patch and the 3rd is the % diff of these results from the base. 4th and 5th columns are the results and % differnce from the base using the older patch (SPURR read in syscall entry/exit path). Base Scaled-Acct SPURR-in-syscall Result Result % diff Result % diff Simple syscall: 0.3086 0.3086 0.0000 0.3452 11.8600 Simple read: 0.4591 0.4671 1.7425 0.5044 9.86713 Simple write: 0.4364 0.4366 0.0458 0.4731 8.40971 Simple stat: 2.0055 2.0295 1.1967 2.0669 3.06158 Simple fstat: 0.5962 0.5876 -1.442 0.6368 6.80979 Simple open/close: 3.1283 3.1009 -0.875 3.2088 2.57328 Select on 10 fd's: 0.8554 0.8457 -1.133 0.8667 1.32101 Select on 100 fd's: 3.5292 3.6329 2.9383 3.6664 3.88756 Select on 250 fd's: 7.9097 8.1881 3.5197 8.2242 3.97613 Select on 500 fd's: 15.2659 15.836 3.7357 15.873 3.97814 Select on 10 tcp fd's: 0.9576 0.9416 -1.670 0.9752 1.83792 Select on 100 tcp fd's: 7.248 7.2254 -0.311 7.2685 0.28283 Select on 250 tcp fd's: 17.7742 17.707 -0.375 17.749 -0.1406 Select on 500 tcp fd's: 35.4258 35.25 -0.496 35.286 -0.3929 Signal handler installation: 0.6131 0.6075 -0.913 0.647 5.52927 Signal handler overhead: 2.0919 2.1078 0.7600 2.1831 4.35967 Protection fault: 0.7345 0.7478 1.8107 0.8031 9.33968 Pipe latency: 33.006 16.398 -50.31 33.475 1.42368 AF_UNIX sock stream latency: 14.5093 30.910 113.03 30.715 111.692 Process fork+exit: 219.8 222.8 1.3648 229.37 4.35623 Process fork+execve: 876.14 873.28 -0.32 868.66 -0.8533 Process fork+/bin/sh -c: 2830 2876.5 1.6431 2958 4.52296 File /var/tmp/XXX write bw: 1193497 1195536 0.1708 118657 -0.5799 Pagefaults on /var/tmp/XXX: 3.1272 3.2117 2.7020 3.2521 3.99398 Also, kernel compile times show no difference with this patch applied. [pbadari@us.ibm.com: Avoid unnecessary PURR reading] Signed-off-by:Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
-
Michael Neuling authored
This moves the new items to the end of the taskstats struct as requested by Balbir and yourself. Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Neuling authored
This adds items to the taststats struct to account for user and system time based on scaling the CPU frequency and instruction issue rates. Adds account_(user|system)_time_scaled callbacks which architectures can use to account for time using this mechanism. Signed-off-by:
-
Joe Perches authored
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by:
Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
if (controller && !request_region) then we leaked a tty driver struct, fix it by adding function deinit tail with goto-ing into it (and from other fail paths too) Signed-off-by:
-
Jiri Slaby authored
We may use pdev->revision instead of reading pci config space directly, so remove pci_read_config_dword invoking. Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
- register_device unconditionally (non-pci dependent) to have also isa devices in /dev - unregister devices on module removal - don't set TTY_DRIVER_DYNAMIC_DEV twice (removed the one dependent on some macro) Signed-off-by:
-
Jiri Slaby authored
rocket, switch sleep_on to completion - sleep_on is deprecated and racy, use completion instead - also check retval of interruptible function and return ERESTARTSYS eventually Signed-off-by:
-
Jiri Slaby authored
interruptible_sleep_on is deprecated, use completion instead Signed-off-by:
-
Jiri Slaby authored
prepend moxa_ to all moxa functions which laxes this Signed-off-by:
-
Jiri Slaby authored
- use dev_* where pdev is available (probe function) - add some printks on fail paths - add KERN_ macros otherwise - remove useless verbose variable - wrap lines to 80 cols at most Signed-off-by:
-
Jesper Juhl authored
CC drivers/char/cyclades.o drivers/char/cyclades.c: In function 'cy_init': drivers/char/cyclades.c:5488: warning: label 'err_unr' defined but not used Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Acked-by:
-
Jiri Slaby authored
Most of them are signedness, the rest unused function parameters. Signed-off-by:
-
Jiri Slaby authored
Lock whole processing in isr, avoid error-prone locking/unlocking in rx/tx esp. On fail paths (there was a bug in the past yet). Signed-off-by:
-
Jiri Slaby authored
Due to large indent the code was wrapped and unreadable. Create 3 function instead of one and reorder the code, so it is readable now. Signed-off-by:
-
Jiri Slaby authored
The work done in bottom half doesn't cost much cpu time (e.g. tty_hangup itself schedules its own bottom half), it's possible to do the work in isr directly and save hence some .text. Signed-off-by:
-
Jiri Slaby authored
moxa, fix and optimise empty timer don't wait and delete empty timer in empty timer function. Also fire next empty timer at rounded jiffies to save power. Signed-off-by:
-
Adrian Bunk authored
This patch contains the next round of scheduled OSS code removal. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
Daniel Walker <dwalker@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
-
Daniel Walker authored
Just removing white space at the end of lines. Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
-
