Pull x86 microcode loading updates from Borislav Petkov:
 "The first, cleanup part of the microcode loader reorg tglx has been
  working on. The other part wasn't fully ready in time so it will
  follow on later.

  This part makes the loader core code as it is practically enabled on
  pretty much every baremetal machine so there's no need to have the
  Kconfig items.

  In addition, there are cleanups which prepare for future feature
  enablement"

* tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD
  x86/microcode/intel: Remove pointless mutex
  x86/microcode/intel: Remove debug code
  x86/microcode: Move core specific defines to local header
  x86/microcode/intel: Rename get_datasize() since its used externally
  x86/microcode: Make reload_early_microcode() static
  x86/microcode: Include vendor headers into microcode.h
  x86/microcode/intel: Move microcode functions out of cpu/intel.c
  x86/microcode: Hide the config knob
  x86/mm: Remove unused microcode.h include
  x86/microcode: Remove microcode_mutex
  x86/microcode/AMD: Rip out static buffers

Pull x86 SEV updates from Borislav Petkov:

 - Handle the case where the beginning virtual address of the address
   range whose SEV encryption status needs to change, is not page
   aligned so that callers which round up the number of pages to be
   decrypted, would mark a trailing page as decrypted and thus cause
   corruption during live migration.

 - Return an error from the #VC handler on AMD SEV-* guests when the
   debug registers swapping is enabled as a DR7 access should not happen
   then - that register is guest/host switched.

* tag 'x86_sev_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Make enc_dec_hypercall() accept a size instead of npages
  x86/sev: Do not handle #VC for DR7 read/write

Pull x86 RAS updates from Borislav Petkov:

 - Add a quirk for AMD Zen machines where Instruction Fetch unit poison
   consumption MCEs are not delivered synchronously but still within the
   same context, which can lead to erroneously increased error severity
   and unneeded kernel panics

 - Do not log errors caught by polling shared MCA banks as they
   materialize as duplicated error records otherwise

* tag 'ras_core_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE: Always save CS register on AMD Zen IF Poison errors
  x86/mce: Prevent duplicate error records

Pull misc x86 updates from Borislav Petkov:

 - Add PCI device IDs for a new AMD family 0x1a CPUs and use them in the
   respective drivers

 - Update HPE Superdome Flex maintainers list

* tag 'x86_misc_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/uv: Update HPE Superdome Flex Maintainers
  EDAC/amd64: Add support for AMD family 1Ah models 00h-1Fh and 40h-4Fh
  hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models
  x86/amd_nb: Add PCI IDs for AMD Family 1Ah-based models

Pull x86 boot updates from Borislav Petkov:
 "Avoid the baremetal decompressor code when booting on an EFI machine.

  This is mandated by the current tightening of EFI executables
  requirements when used in a secure boot scenario. More specifically,
  an EFI executable cannot have a single section with RWX permissions,
  which conflicts with the in-place kernel decompression that is done
  today.

  Instead, the things required by the booting kernel image are done in
  the EFI stub now.

  Work by Ard Biesheuvel"

* tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/efistub: Avoid legacy decompressor when doing EFI boot
  x86/efistub: Perform SNP feature test while running in the firmware
  efi/libstub: Add limit argument to efi_random_alloc()
  x86/decompressor: Factor out kernel decompression and relocation
  x86/decompressor: Move global symbol references to C code
  decompress: Use 8 byte alignment
  x86/efistub: Prefer EFI memory attributes protocol over DXE services
  x86/efistub: Perform 4/5 level paging switch from the stub
  x86/decompressor: Merge trampoline cleanup with switching code
  x86/decompressor: Pass pgtable address to trampoline directly
  x86/decompressor: Only call the trampoline when changing paging levels
  x86/decompressor: Call trampoline directly from C code
  x86/decompressor: Avoid the need for a stack in the 32-bit trampoline
  x86/decompressor: Use standard calling convention for trampoline
  x86/decompressor: Call trampoline as a normal function
  x86/decompressor: Assign paging related global variables earlier
  x86/decompressor: Store boot_params pointer in callee save register
  x86/efistub: Clear BSS in EFI handover protocol entrypoint
  x86/decompressor: Avoid magic offsets for EFI handover entrypoint
  x86/efistub: Simplify and clean up handover entry code
  ...

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the CPU hotplug core:

   - Support partial SMT enablement.

     So far the sysfs SMT control only allows to toggle between SMT on
     and off. That's sufficient for x86 which usually has at max two
     threads except for the Xeon PHI platform which has four threads per
     core

     Though PowerPC has up to 16 threads per core and so far it's only
     possible to control the number of enabled threads per core via a
     command line option. There is some way to control this at runtime,
     but that lacks enforcement and the usability is awkward

     This update expands the sysfs interface and the core infrastructure
     to accept numerical values so PowerPC can build SMT runtime control
     for partial SMT enablement on top

     The core support has also been provided to the PowerPC maintainers
     who added the PowerPC related changes on top

   - Minor cleanups and documentation updates"

* tag 'smp-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Fix state names
  cpu/hotplug: Remove unused function declaration cpu_set_state_online()
  cpu/SMT: Fix cpu_smt_possible() comment
  cpu/SMT: Allow enabling partial SMT states via sysfs
  cpu/SMT: Create topology_smt_thread_allowed()
  cpu/SMT: Remove topology_smt_supported()
  cpu/SMT: Store the current/max number of threads
  cpu/SMT: Move smt/control simple exit cases earlier
  cpu/SMT: Move SMT prototypes into cpu_smt.h
  cpu/hotplug: Remove dependancy against cpu_primary_thread_mask

Pull irq updates from Thomas Gleixner:
 "Boring updates for the interrupt subsystem:

  Core:

   - Prevent a deadlock of nested interrupt threads vs.
     synchronize_hard()

   - Removal of a stale extern declaration

  Drivers:

   - The first new driver since v6.2 for Amlogic-C3 SoCs

   - The usual small fixes, cleanups and improvements all over the
     place"

* tag 'irq-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Add support for Amlogic-C3 SoCs
  dt-bindings: interrupt-controller: Add support for Amlogic-C3 SoCs
  irqchip/irq-mvebu-sei: Use devm_platform_get_and_ioremap_resource()
  irqchip/ls-scfg-msi: Use devm_platform_get_and_ioremap_resource()
  irqchip: Explicitly include correct DT includes
  irqchip/orion: Use of_address_count() helper
  irqchip/irq-pruss-intc: Do not check for 0 return after calling platform_get_irq()
  irqchip/imx-mu-msi: Do not check for 0 return after calling platform_get_irq()
  irqchipr/i8259: Mark i8259_of_init() static
  irqchip/mips-gic: Mark gic_irq_domain_free() static
  irqchip/xtensa-pic: Include header for xtensa_pic_init_legacy()
  irqchip/loongson-eiointc: Fix return value checking of eiointc_index
  genirq: Remove unused extern declaration
  genirq: Prevent nested thread vs synchronize_hardirq() deadlock

Pull core entry code update from Thomas Gleixner:
 "A single update to the core entry code, which removes the empty user
  address limit check which is a leftover of the removed TIF_FSCHECK"

* tag 'core-entry-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Remove empty addr_limit_user_check()

Merge tag 'clocksource.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull clocksource watchdog updates from Paul McKenney:

 - Handle negative skews in "skew is too large" messages

 - Extend watchdog check exemption to 4-Socket platforms

* tag 'clocksource.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  x86/tsc: Extend watchdog check exemption to 4-Sockets platform
  clocksource: Handle negative skews in "skew is too large" messages

Pull CSD lock updates from Paul McKenney:
 "This series reduces the number of stack traces dumped during CSD-lock
  debugging. This helps to avoid console overrun on systems with large
  numbers of CPUs"

* tag 'csd-lock.2023.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  smp: Reduce NMI traffic from CSD waiters to CSD destination
  smp: Reduce logging due to dump_stack of CSD waiters

Merge tag 'scftorture.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull smp_call_function torture-test updates from Paul McKenney:
 "This prevents some memory-exhaustion false-postitive failures in
  scftorture testing"

* tag 'scftorture.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  scftorture: Add CONFIG_PREEMPT_DYNAMIC=n to NOPREEMPT scenario
  scftorture: Pause testing after memory-allocation failure
  scftorture: Forgive memory-allocation failure if KASAN
  torture: Scale scftorture memory based on number of CPUs

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes, perhaps most notably simplifying
   SRCU_NOTIFIER_INIT() as suggested

 - RCU Tasks updates, most notably treating Tasks RCU callbacks as lazy
   while still treating synchronous grace periods as urgent. Also fixes
   one bug that restores the ability to apply debug-objects to RCU Tasks
   and another that fixes a race condition that could result in
   false-positive failures of the boot-time self-test code

 - RCU-scalability performance-test updates, most notably adding the
   ability to measure the RCU-Tasks's grace-period kthread's CPU
   consumption. This proved quite useful for the RCU Tasks work

 - Reference-acquisition/release performance-test updates, including a
   fix for an uninitialized wait_queue_head_t

 - Miscellaneous torture-test updates

 - Torture-test scripting updates, including removal of the
   non-longer-functional formal-verification scripts, test builds of
   individual RCU Tasks flavors, better diagnostics for loss of
   connectivity for distributed rcutorture tests, disabling of reboot
   loops in qemu/KVM-based rcutorture testing, and passing of init
   parameters to rcutorture's init program

* tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (64 commits)
  rcu: Use WRITE_ONCE() for assignments to ->next for rculist_nulls
  rcu: Make the rcu_nocb_poll boot parameter usable via boot config
  rcu: Mark __rcu_irq_enter_check_tick() ->rcu_urgent_qs load
  srcu,notifier: Remove #ifdefs in favor of SRCU Tiny srcu_usage
  rcutorture: Stop right-shifting torture_random() return values
  torture: Stop right-shifting torture_random() return values
  torture: Move stutter_wait() timeouts to hrtimers
  torture: Move torture_shuffle() timeouts to hrtimers
  torture: Move torture_onoff() timeouts to hrtimers
  torture: Make torture_hrtimeout_*() use TASK_IDLE
  torture: Add lock_torture writer_fifo module parameter
  torture: Add a kthread-creation callback to _torture_create_kthread()
  rcu-tasks: Fix boot-time RCU tasks debug-only deadlock
  rcu-tasks: Permit use of debug-objects with RCU Tasks flavors
  checkpatch: Complain about unexpected uses of RCU Tasks Trace
  torture: Cause mkinitrd.sh to indicate failure on compile errors
  torture: Make init program dump command-line arguments
  torture: Switch qemu from -nographic to -display none
  torture: Add init-program support for loongarch
  torture: Avoid torture-test reboot loops
  ...

Pull hardening updates from Kees Cook:
 "As has become normal, changes are scattered around the tree (either
  explicitly maintainer Acked or for trivial stuff that went ignored):

   - Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
     CONFIG_DEBUG_LIST (Marco Elver)

   - Fix kallsyms lookup failure under Clang LTO (Yonghong Song)

   - Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)

   - Flexible array member conversion not carried in other tree (Gustavo
     A. R. Silva)

   - Various strlcpy() and strncpy() removals not carried in other trees
     (Azeem Shaikh, Justin Stitt)

   - Convert nsproxy.count to refcount_t (Elena Reshetova)

   - Add handful of __counted_by annotations not carried in other trees,
     as well as an LKDTM test

   - Fix build failure with gcc-plugins on GCC 14+

   - Fix selftests to respect SKIP for signal-delivery tests

   - Fix CFI warning for paravirt callback prototype

   - Clarify documentation for seq_show_option_n() usage"

* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
  LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
  kallsyms: Change func signature for cleanup_symbol_name()
  kallsyms: Fix kallsyms_selftest failure
  nsproxy: Convert nsproxy.count to refcount_t
  integrity: Annotate struct ima_rule_opt_list with __counted_by
  lkdtm: Add FAM_BOUNDS test for __counted_by
  Compiler Attributes: counted_by: Adjust name and identifier expansion
  um: refactor deprecated strncpy to memcpy
  um: vector: refactor deprecated strncpy
  alpha: Replace one-element array with flexible-array member
  hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
  list: Introduce CONFIG_LIST_HARDENED
  list_debug: Introduce inline wrappers for debug checks
  compiler_types: Introduce the Clang __preserve_most function attribute
  gcc-plugins: Rename last_stmt() for GCC 14+
  selftests/harness: Actually report SKIP for signal tests
  x86/paravirt: Fix tlb_remove_table function callback prototype warning
  EISA: Replace all non-returning strlcpy with strscpy
  perf: Replace strlcpy with strscpy
  um: Remove strlcpy declaration
  ...

Pull seccomp updates from Kees Cook:

 - Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
   Oskolkov). This touches the scheduler and perf but has been Acked by
   Peter Zijlstra.

 - Fix regression in syscall skipping and restart tracing on arm32. This
   touches arch/arm/ but has been Acked by Arnd Bergmann.

* tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Add missing kerndoc notations
  ARM: ptrace: Restore syscall skipping for tracers
  ARM: ptrace: Restore syscall restart tracing
  selftests/seccomp: Handle arm32 corner cases better
  perf/benchmark: add a new benchmark for seccom_unotify
  selftest/seccomp: add a new test for the sync mode of seccomp_user_notify
  seccomp: add the synchronous mode for seccomp_unotify
  sched: add a few helpers to wake up tasks on the current cpu
  sched: add WF_CURRENT_CPU and externise ttwu
  seccomp: don't use semaphore and wait_queue together

Pull pstore updates from Kees Cook:

 - Greatly simplify compression support (Ard Biesheuvel)

 - Avoid crashes for corrupted offsets when prz size is 0 (Enlin Mu)

 - Expand range of usable record sizes (Yuxiao Zhang)

 - Fix kernel-doc warning (Matthew Wilcox)

* tag 'pstore-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Fix kernel-doc warning
  pstore: Support record sizes larger than kmalloc() limit
  pstore/ram: Check start of empty przs during init
  pstore: Replace crypto API compression with zlib_deflate library calls
  pstore: Remove worst-case compression size logic

Pull btrfs updates from David Sterba:
 "No new features, the bulk of the changes are fixes, refactoring and
  cleanups. The notable fix is the scrub performance restoration after
  rewrite in 6.4, though still only partial.

  Fixes:

   - scrub performance drop due to rewrite in 6.4 partially restored:
      - do IO grouping by blg_plug/blk_unplug again
      - avoid unnecessary tree searches when processing stripes, in
        extent and checksum trees
      - the drop is noticeable on fast PCIe devices, -66% and restored
        to -33% of the original
      - backports to 6.4 planned

   - handle more corner cases of transaction commit during orphan
     cleanup or delayed ref processing

   - use correct fsid/metadata_uuid when validating super block

   - copy directory permissions and time when creating a stub subvolume

  Core:

   - debugging feature integrity checker deprecated, to be removed in
     6.7

   - in zoned mode, zones are activated just before the write, making
     error handling easier, now the overcommit mechanism can be enabled
     again which improves performance by avoiding more frequent flushing

   - v0 extent handling completely removed, deprecated long time ago

   - error handling improvements

   - tests:
      - extent buffer bitmap tests
      - pinned extent splitting tests

   - cleanups and refactoring:
      - compression writeback
      - extent buffer bitmap
      - space flushing, ENOSPC handling"

* tag 'for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
  btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
  btrfs: tests: test invalid splitting when skipping pinned drop extent_map
  btrfs: tests: add a test for btrfs_add_extent_mapping
  btrfs: tests: add extent_map tests for dropping with odd layouts
  btrfs: scrub: move write back of repaired sectors to scrub_stripe_read_repair_worker()
  btrfs: scrub: don't go ordered workqueue for dev-replace
  btrfs: scrub: fix grouping of read IO
  btrfs: scrub: avoid unnecessary csum tree search preparing stripes
  btrfs: scrub: avoid unnecessary extent tree search preparing stripes
  btrfs: copy dir permission and time when creating a stub subvolume
  btrfs: remove pointless empty list check when reading delayed dir indexes
  btrfs: drop redundant check to use fs_devices::metadata_uuid
  btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super
  btrfs: use the correct superblock to compare fsid in btrfs_validate_super
  btrfs: simplify memcpy either of metadata_uuid or fsid
  btrfs: add a helper to read the superblock metadata_uuid
  btrfs: remove v0 extent handling
  btrfs: output extra debug info if we failed to find an inline backref
  btrfs: move the !zoned assert into run_delalloc_cow
  btrfs: consolidate the error handling in run_delalloc_nocow
  ...

Pull affs updates from David Sterba:
 "Two minor updates for AFFS:

   - reimplement writepage() address space callback on top of
     migrate_folio()

   - fix a build warning, local parameters 'toupper' collide with the
     standard ctype.h name"

* tag 'affs-for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: rename local toupper() to fn() to avoid confusion
  affs: remove writepage implementation

Pull fsverity updates from Eric Biggers:
 "Several cleanups for fs/verity/, including two commits that make the
  builtin signature support more cleanly separated from the base
  feature"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: skip PKCS#7 parser when keyring is empty
  fsverity: move sysctl registration out of signature.c
  fsverity: simplify handling of errors during initcall
  fsverity: explicitly check that there is no algorithm 0

Pull fscrypt update from Eric Biggers:
 "Just a small documentation improvement"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: improve the "Encryption modes and usage" section

Pull iomap updates from Darrick Wong:
 "We've got some big changes for this release -- I'm very happy to be
  landing willy's work to enable large folios for the page cache for
  general read and write IOs when the fs can make contiguous space
  allocations, and Ritesh's work to track sub-folio dirty state to
  eliminate the write amplification problems inherent in using large
  folios.

  As a bonus, io_uring can now process write completions in the caller's
  context instead of bouncing through a workqueue, which should reduce
  io latency dramatically. IOWs, XFS should see a nice performance bump
  for both IO paths.

  Summary:

   - Make large writes to the page cache fill sparse parts of the cache
     with large folios, then use large memcpy calls for the large folio.

   - Track the per-block dirty state of each large folio so that a
     buffered write to a single byte on a large folio does not result in
     a (potentially) multi-megabyte writeback IO.

   - Allow some directio completions to be performed in the initiating
     task's context instead of punting through a workqueue. This will
     reduce latency for some io_uring requests"

* tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
  iomap: support IOCB_DIO_CALLER_COMP
  io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
  fs: add IOCB flags related to passing back dio completions
  iomap: add IOMAP_DIO_INLINE_COMP
  iomap: only set iocb->private for polled bio
  iomap: treat a write through cache the same as FUA
  iomap: use an unsigned type for IOMAP_DIO_* defines
  iomap: cleanup up iomap_dio_bio_end_io()
  iomap: Add per-block dirty state tracking to improve performance
  iomap: Allocate ifs in ->write_begin() early
  iomap: Refactor iomap_write_delalloc_punch() function out
  iomap: Use iomap_punch_t typedef
  iomap: Fix possible overflow condition in iomap_write_delalloc_scan
  iomap: Add some uptodate state handling helpers for ifs state bitmap
  iomap: Drop ifs argument from iomap_set_range_uptodate()
  iomap: Rename iomap_page to iomap_folio_state and others
  iomap: Copy larger chunks from userspace
  iomap: Create large folios in the buffered write path
  filemap: Allow __filemap_get_folio to allocate large folios
  filemap: Add fgf_t typedef
  ...

Pull erofs updates from Gao Xiang:
 "In this cycle, a xattr bloom filter feature is introduced to speed up
  negative xattr lookups, which was originally suggested by Alexander
  for Composefs use cases.

  Additionally, the DEFLATE algorithm is now supported, which can be
  used together with hardware accelerators for our cloud workloads. Each
  supported compression algorithm can be selected on a per-file basis
  for specific access patterns too.

  There are also some random fixes and cleanups as usual:

   - Support xattr bloom filter to optimize negative xattr lookups

   - Support DEFLATE compression algorithm as an alternative

   - Fix a regression that ztailpacking pclusters don't release properly

   - Avoid warning dedupe and fragments features anymore

   - Some folio conversions and cleanups"

* tag 'erofs-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: release ztailpacking pclusters properly
  erofs: don't warn dedupe and fragments features anymore
  erofs: adapt folios for z_erofs_read_folio()
  erofs: adapt folios for z_erofs_readahead()
  erofs: get rid of fe->backmost for cache decompression
  erofs: drop z_erofs_page_mark_eio()
  erofs: tidy up z_erofs_do_read_page()
  erofs: move preparation logic into z_erofs_pcluster_begin()
  erofs: avoid obsolete {collector,collection} terms
  erofs: simplify z_erofs_read_fragment()
  erofs: remove redundant erofs_fs_type declaration in super.c
  erofs: add necessary kmem_cache_create flags for erofs inode cache
  erofs: clean up redundant comment and adjust code alignment
  erofs: refine warning messages for zdata I/Os
  erofs: boost negative xattr lookup with bloom filter
  erofs: update on-disk format for xattr name filter
  erofs: DEFLATE compression support

Pull file locking updates from Jeff Layton:

 - new functionality for F_OFD_GETLK: requesting a type of F_UNLCK will
   find info about whatever lock happens to be first in the given range,
   regardless of type.

 - an OFD lock selftest

 - bugfix involving a UAF in a tracepoint

 - comment typo fix

* tag 'filelock-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock
  fs/locks: Fix typo
  selftests: add OFD lock tests
  fs/locks: F_UNLCK extension for F_OFD_GETLK

Pull procfs fixes from Christian Brauner:
 "Mode changes to files under /proc/<pid>/ aren't supported ever since
  commit 6d76fa58 ("Don't allow chmod() on the /proc/<pid>/ files").

  Due to an oversight in commit 1b3044e3 ("procfs: fix pthread
  cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
  mode changes on /proc/thread-self/comm were accidently allowed.

  Similar, mode changes for all files beneath /proc/<pid>/net/ are
  blocked but mode changes on /proc/<pid>/net itself were accidently
  allowed.

  Both issues come down to not using the generic proc_setattr() helper
  which blocks all mode changes. This is rectified with this pull
  request.

  This also removes a strange nolibc test that abused /proc/<pid>/net
  for testing mode changes. Using procfs for this test never made a lot
  of sense given procfs has special semantics for almost everything
  anway.

  Both changes are minor user-visible changes. It is however very
  unlikely that mode changes on proc/<pid>/net and
  /proc/thread-self/comm are something that userspace relies on"

* tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  procfs: block chmod on /proc/thread-self/comm
  proc: use generic setattr() for /proc/$PID/net
  selftests/nolibc: drop test chmod_net

Pull autofs fixes from Christian Brauner:
 "This fixes a memory leak in autofs reported by syzkaller and a missing
  conversion from uninterruptible to interruptible wake up when autofs
  is in catatonic mode"

* tag 'v6.6-vfs.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  autofs: use wake_up() instead of wake_up_interruptible(()
  autofs: fix memory leak of waitqueues in autofs_catatonic_mode

Pull fchmodat2 system call from Christian Brauner:
 "This adds the fchmodat2() system call. It is a revised version of the
  fchmodat() system call, adding a missing flag argument. Support for
  both AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH are included.

  Adding this system call revision has been a longstanding request but
  so far has always fallen through the cracks. While the kernel
  implementation of fchmodat() does not have a flag argument the libc
  provided POSIX-compliant fchmodat(3) version does. Both glibc and musl
  have to implement a workaround in order to support AT_SYMLINK_NOFOLLOW
  (see [1] and [2]).

  The workaround is brittle because it relies not just on O_PATH and
  O_NOFOLLOW semantics and procfs magic links but also on our rather
  inconsistent symlink semantics.

  This gives userspace a proper fchmodat2() system call that libcs can
  use to properly implement fchmodat(3) and allows them to get rid of
  their hacks. In this case it will immediately benefit them as the
  current workaround is already defunct because of aformentioned
  inconsistencies.

  In addition to AT_SYMLINK_NOFOLLOW, give userspace the ability to use
  AT_EMPTY_PATH with fchmodat2(). This is already possible with
  fchownat() so there's no reason to not also support it for
  fchmodat2().

  The implementation is simple and comes with selftests. Implementation
  of the system call and wiring up the system call are done as separate
  patches even though they could arguably be one patch. But in case
  there are merge conflicts from other system call additions it can be
  beneficial to have separate patches"

Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=17eca54051ee28ba1ec3f9aed170a62630959143;hb=a492b1e5ef7ab50c6fdd4e4e9879ea5569ab0a6c#l35 [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c?id=718f363bc2067b6487900eddc9180c84e7739f80#n28 [2]

* tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  selftests: fchmodat2: remove duplicate unneeded defines
  fchmodat2: add support for AT_EMPTY_PATH
  selftests: Add fchmodat2 selftest
  arch: Register fchmodat2, usually as syscall 452
  fs: Add fchmodat2()
  Non-functional cleanup of a "__user * filename"

Pull superblock updates from Christian Brauner:
 "This contains the super rework that was ready for this cycle. The
  first part changes the order of how we open block devices and allocate
  superblocks, contains various cleanups, simplifications, and a new
  mechanism to wait on superblock state changes.

  This unblocks work to ultimately limit the number of writers to a
  block device. Jan has already scheduled follow-up work that will be
  ready for v6.7 and allows us to restrict the number of writers to a
  given block device. That series builds on this work right here.

  The second part contains filesystem freezing updates.

  Overview:

  The generic superblock changes are rougly organized as follows
  (ignoring additional minor cleanups):

   (1) Removal of the bd_super member from struct block_device.

       This was a very odd back pointer to struct super_block with
       unclear rules. For all relevant places we have other means to get
       the same information so just get rid of this.

   (2) Simplify rules for superblock cleanup.

       Roughly, everything that is allocated during fs_context
       initialization and that's stored in fs_context->s_fs_info needs
       to be cleaned up by the fs_context->free() implementation before
       the superblock allocation function has been called successfully.

       After sget_fc() returned fs_context->s_fs_info has been
       transferred to sb->s_fs_info at which point sb->kill_sb() if
       fully responsible for cleanup. Adhering to these rules means that
       cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
       brittle and inconsistent.

       Cleanup shouldn't be duplicated between sb->put_super() as
       sb->put_super() is only called if sb->s_root has been set aka
       when the filesystem has been successfully born (SB_BORN). That
       complexity should be avoided.

       This also means that block devices are to be closed in
       sb->kill_sb() instead of sb->put_super(). More details in the
       lower section.

   (3) Make it possible to lookup or create a superblock before opening
       block devices

       There's a subtle dependency on (2) as some filesystems did rely
       on fill_super() to be called in order to correctly clean up
       sb->s_fs_info. All these filesystems have been fixed.

   (4) Switch most filesystem to follow the same logic as the generic
       mount code now does as outlined in (3).

   (5) Use the superblock as the holder of the block device. We can now
       easily go back from block device to owning superblock.

   (6) Export and extend the generic fs_holder_ops and use them as
       holder ops everywhere and remove the filesystem specific holder
       ops.

   (7) Call from the block layer up into the filesystem layer when the
       block device is removed, allowing to shut down the filesystem
       without risk of deadlocks.

   (8) Get rid of get_super().

       We can now easily go back from the block device to owning
       superblock and can call up from the block layer into the
       filesystem layer when the device is removed. So no need to wade
       through all registered superblock to find the owning superblock
       anymore"

Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/

* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
  super: use higher-level helper for {freeze,thaw}
  super: wait until we passed kill super
  super: wait for nascent superblocks
  super: make locking naming consistent
  super: use locking helpers
  fs: simplify invalidate_inodes
  fs: remove get_super
  block: call into the file system for ioctl BLKFLSBUF
  block: call into the file system for bdev_mark_dead
  block: consolidate __invalidate_device and fsync_bdev
  block: drop the "busy inodes on changed media" log message
  dasd: also call __invalidate_device when setting the device offline
  amiflop: don't call fsync_bdev in FDFMTBEG
  floppy: call disk_force_media_change when changing the format
  block: simplify the disk_force_media_change interface
  nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
  xfs use fs_holder_ops for the log and RT devices
  xfs: drop s_umount over opening the log and RT devices
  ext4: use fs_holder_ops for the log device
  ext4: drop s_umount over opening the log device
  ...

Pull misc vfs updates from Christian Brauner:
 "This contains the usual miscellaneous features, cleanups, and fixes
  for vfs and individual filesystems.

  Features:

   - Block mode changes on symlinks and rectify our broken semantics

   - Report file modifications via fsnotify() for splice

   - Allow specifying an explicit timeout for the "rootwait" kernel
     command line option. This allows to timeout and reboot instead of
     always waiting indefinitely for the root device to show up

   - Use synchronous fput for the close system call

  Cleanups:

   - Get rid of open-coded lockdep workarounds for async io submitters
     and replace it all with a single consolidated helper

   - Simplify epoll allocation helper

   - Convert simple_write_begin and simple_write_end to use a folio

   - Convert page_cache_pipe_buf_confirm() to use a folio

   - Simplify __range_close to avoid pointless locking

   - Disable per-cpu buffer head cache for isolated cpus

   - Port ecryptfs to kmap_local_page() api

   - Remove redundant initialization of pointer buf in pipe code

   - Unexport the d_genocide() function which is only used within core
     vfs

   - Replace printk(KERN_ERR) and WARN_ON() with WARN()

  Fixes:

   - Fix various kernel-doc issues

   - Fix refcount underflow for eventfds when used as EFD_SEMAPHORE

   - Fix a mainly theoretical issue in devpts

   - Check the return value of __getblk() in reiserfs

   - Fix a racy assert in i_readcount_dec

   - Fix integer conversion issues in various functions

   - Fix LSM security context handling during automounts that prevented
     NFS superblock sharing"

* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
  cachefiles: use kiocb_{start,end}_write() helpers
  ovl: use kiocb_{start,end}_write() helpers
  aio: use kiocb_{start,end}_write() helpers
  io_uring: use kiocb_{start,end}_write() helpers
  fs: create kiocb_{start,end}_write() helpers
  fs: add kerneldoc to file_{start,end}_write() helpers
  io_uring: rename kiocb_end_write() local helper
  splice: Convert page_cache_pipe_buf_confirm() to use a folio
  libfs: Convert simple_write_begin and simple_write_end to use a folio
  fs/dcache: Replace printk and WARN_ON by WARN
  fs/pipe: remove redundant initialization of pointer buf
  fs: Fix kernel-doc warnings
  devpts: Fix kernel-doc warnings
  doc: idmappings: fix an error and rephrase a paragraph
  init: Add support for rootwait timeout parameter
  vfs: fix up the assert in i_readcount_dec
  fs: Fix one kernel-doc comment
  docs: filesystems: idmappings: clarify from where idmappings are taken
  fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
  vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
  ...

Pull libfs and tmpfs updates from Christian Brauner:
 "This cycle saw a lot of work for tmpfs that required changes to the
  vfs layer. Andrew, Hugh, and I decided to take tmpfs through vfs this
  cycle. Things will go back to mm next cycle.

  Features
  ========

   - By far the biggest work is the quota support for tmpfs. New tmpfs
     quota infrastructure is added to support it and a new QFMT_SHMEM
     uapi option is exposed.

     This offers user and group quotas to tmpfs (project quotas will be
     added later). Similar to other filesystems tmpfs quota are not
     supported within user namespaces yet.

   - Add support for user xattrs. While tmpfs already supports security
     xattrs (security.*) and POSIX ACLs for a long time it lacked
     support for user xattrs (user.*). With this pull request tmpfs will
     be able to support a limited number of user xattrs.

     This is accompanied by a fix (see below) to limit persistent simple
     xattr allocations.

   - Add support for stable directory offsets. Currently tmpfs relies on
     the libfs provided cursor-based mechanism for readdir. This causes
     issues when a tmpfs filesystem is exported via NFS.

     NFS clients do not open directories. Instead, each server-side
     readdir operation opens the directory, reads it, and then closes
     it. Since the cursor state for that directory is associated with
     the opened file it is discarded after each readdir operation. Such
     directory offsets are not just cached by NFS clients but also
     various userspace libraries based on these clients.

     As it stands there is no way to invalidate the caches when
     directory offsets have changed and the whole application depends on
     unchanging directory offsets.

     At LSFMM we discussed how to solve this problem and decided to
     support stable directory offsets. libfs now allows filesystems like
     tmpfs to use an xarrary to map a directory offset to a dentry. This
     mechanism is currently only used by tmpfs but can be supported by
     others as well.

  Fixes
  =====

   - Change persistent simple xattrs allocations in libfs from
     GFP_KERNEL to GPF_KERNEL_ACCOUNT so they're subject to memory
     cgroup limits. Since this is a change to libfs it affects both
     tmpfs and kernfs.

   - Correctly verify {g,u}id mount options.

     A new filesystem context is created via fsopen() which records the
     namespace that becomes the owning namespace of the superblock when
     fsconfig(FSCONFIG_CMD_CREATE) is called for filesystems that are
     mountable in namespaces. However, fsconfig() calls can occur in a
     namespace different from the namespace where fsopen() has been
     called.

     Currently, when fsconfig() is called to set {g,u}id mount options
     the requested {g,u}id is mapped into a k{g,u}id according to the
     namespace where fsconfig() was called from. The resulting k{g,u}id
     is not guaranteed to be resolvable in the namespace of the
     filesystem (the one that fsopen() was called in).

     This means it's possible for an unprivileged user to create files
     owned by any group in a tmpfs mount since it's possible to set the
     setid bits on the tmpfs directory.

     The contract for {g,u}id mount options and {g,u}id values in
     general set from userspace has always been that they are translated
     according to the caller's idmapping. In so far, tmpfs has been
     doing the correct thing. But since tmpfs is mountable in
     unprivileged contexts it is also necessary to verify that the
     resulting {k,g}uid is representable in the namespace of the
     superblock to avoid such bugs.

     The new mount api's cross-namespace delegation abilities are
     already widely used. Having talked to a bunch of userspace this is
     the most faithful solution with minimal regression risks"

* tag 'v6.6-vfs.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  tmpfs,xattr: GFP_KERNEL_ACCOUNT for simple xattrs
  mm: invalidation check mapping before folio_contains
  tmpfs: trivial support for direct IO
  tmpfs,xattr: enable limited user extended attributes
  tmpfs: track free_ispace instead of free_inodes
  xattr: simple_xattr_set() return old_xattr to be freed
  tmpfs: verify {g,u}id mount options correctly
  shmem: move spinlock into shmem_recalc_inode() to fix quota support
  libfs: Remove parent dentry locking in offset_iterate_dir()
  libfs: Add a lock class for the offset map's xa_lock
  shmem: stable directory offsets
  shmem: Refactor shmem_symlink()
  libfs: Add directory operations for stable offsets
  shmem: fix quota lock nesting in huge hole handling
  shmem: Add default quota limit mount options
  shmem: quota support
  shmem: prepare shmem quota infrastructure
  quota: Check presence of quota operation structures instead of ->quota_read and ->quota_write callbacks
  shmem: make shmem_get_inode() return ERR_PTR instead of NULL
  shmem: make shmem_inode_acct_block() return error

Pull vfs timestamp updates from Christian Brauner:
 "This adds VFS support for multi-grain timestamps and converts tmpfs,
  xfs, ext4, and btrfs to use them. This carries acks from all relevant
  filesystems.

  The VFS always uses coarse-grained timestamps when updating the ctime
  and mtime after a change. This has the benefit of allowing filesystems
  to optimize away a lot of metadata updates, down to around 1 per
  jiffy, even when a file is under heavy writes.

  Unfortunately, this has always been an issue when we're exporting via
  NFSv3, which relies on timestamps to validate caches. A lot of changes
  can happen in a jiffy, so timestamps aren't sufficient to help the
  client decide to invalidate the cache.

  Even with NFSv4, a lot of exported filesystems don't properly support
  a change attribute and are subject to the same problems with timestamp
  granularity. Other applications have similar issues with timestamps
  (e.g., backup applications).

  If we were to always use fine-grained timestamps, that would improve
  the situation, but that becomes rather expensive, as the underlying
  filesystem would have to log a lot more metadata updates.

  This introduces fine-grained timestamps that are used when they are
  actively queried.

  This uses the 31st bit of the ctime tv_nsec field to indicate that
  something has queried the inode for the mtime or ctime. When this flag
  is set, on the next mtime or ctime update, the kernel will fetch a
  fine-grained timestamp instead of the usual coarse-grained one.

  As POSIX generally mandates that when the mtime changes, the ctime
  must also change the kernel always stores normalized ctime values, so
  only the first 30 bits of the tv_nsec field are ever used.

  Filesytems can opt into this behavior by setting the FS_MGTIME flag in
  the fstype. Filesystems that don't set this flag will continue to use
  coarse-grained timestamps.

  Various preparatory changes, fixes and cleanups are included:

   - Fixup all relevant places where POSIX requires updating ctime
     together with mtime. This is a wide-range of places and all
     maintainers provided necessary Acks.

   - Add new accessors for inode->i_ctime directly and change all
     callers to rely on them. Plain accesses to inode->i_ctime are now
     gone and it is accordingly rename to inode->__i_ctime and commented
     as requiring accessors.

   - Extend generic_fillattr() to pass in a request mask mirroring in a
     sense the statx() uapi. This allows callers to pass in a request
     mask to only get a subset of attributes filled in.

   - Rework timestamp updates so it's possible to drop the @now
     parameter the update_time() inode operation and associated helpers.

   - Add inode_update_timestamps() and convert all filesystems to it
     removing a bunch of open-coding"

* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
  btrfs: convert to multigrain timestamps
  ext4: switch to multigrain timestamps
  xfs: switch to multigrain timestamps
  tmpfs: add support for multigrain timestamps
  fs: add infrastructure for multigrain timestamps
  fs: drop the timespec64 argument from update_time
  xfs: have xfs_vn_update_time gets its own timestamp
  fat: make fat_update_time get its own timestamp
  fat: remove i_version handling from fat_update_time
  ubifs: have ubifs_update_time use inode_update_timestamps
  btrfs: have it use inode_update_timestamps
  fs: drop the timespec64 arg from generic_update_time
  fs: pass the request_mask to generic_fillattr
  fs: remove silly warning from current_time
  gfs2: fix timestamp handling on quota inodes
  fs: rename i_ctime field to __i_ctime
  selinux: convert to ctime accessor functions
  security: convert to ctime accessor functions
  apparmor: convert to ctime accessor functions
  sunrpc: convert to ctime accessor functions
  ...

Pull mount API updates from Christian Brauner:
 "This introduces FSCONFIG_CMD_CREATE_EXCL which allows userspace to
  implement something like

      $ mount -t ext4 --exclusive /dev/sda /B

  which fails if a superblock for the requested filesystem does already
  exist instead of silently reusing an existing superblock.

  Without it, in the sequence

      $ move-mount -f xfs -o       source=/dev/sda4 /A
      $ move-mount -f xfs -o noacl,source=/dev/sda4 /B

  the initial mounter will create a superblock. The second mounter will
  reuse the existing superblock, creating a bind-mount (see [1] for the
  source of the move-mount binary).

  The problem is that reusing an existing superblock means all mount
  options other than read-only and read-write will be silently ignored
  even if they are incompatible requests. For example, the second mount
  has requested no POSIX ACL support but since the existing superblock
  is reused POSIX ACL support will remain enabled.

  Such silent superblock reuse can easily become a security issue.

  After adding support for FSCONFIG_CMD_CREATE_EXCL to mount(8) in
  util-linux this can be fixed:

      $ move-mount -f xfs --exclusive -o       source=/dev/sda4 /A
      $ move-mount -f xfs --exclusive -o noacl,source=/dev/sda4 /B
      Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed

  This requires the new mount api. With the old mount api it would be
  necessary to plumb this through every legacy filesystem's
  file_system_type->mount() method. If they want this feature they are
  most welcome to switch to the new mount api"

Link: https://github.com/brauner/move-mount-beneath [1]
Link: https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Link: https://lore.kernel.org/lkml/20230824-anzog-allheilmittel-e8c63e429a79@brauner/

* tag 'v6.6-vfs.fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: add FSCONFIG_CMD_CREATE_EXCL
  fs: add vfs_cmd_reconfigure()
  fs: add vfs_cmd_create()
  super: remove get_tree_single_reconf()

Merge tag 'irqchip-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

  - Fix for Loongsoon eiointc init error handling

  - Fix a bunch of warning showing up when -Wmissing-prototypes is set

  - A set of fixes for drivers checking for 0 as a potential return
    value from platform_get_irq()

  - Another set of patches converting existing code to the use of helpers
    such as of_address_count() and devm_platform_get_and_ioremap_resource()

  - A tree-wide cleanup of drivers including of_*.h without discrimination

  - Added support for the Amlogic C3 SoCs

Link: https://lore.kernel.org/lkml/20230828091543.4001857-1-maz@kernel.org

Pull SCSI fixes from James Bottomley:
 "Three small driver fixes and one larger unused function set removal in
  the raid class (so no external impact)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: snic: Fix double free in snic_tgt_create()
  scsi: core: raid_class: Remove raid_component_add()
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
  scsi: ufs: mcq: Fix the search/wrap around logic

Pull x86 fixes from Ingo Molnar:
 "Fix an FPU invalidation bug on exec(), and fix a performance
  regression due to a missing setting of X86_FEATURE_OSXSAVE"

* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
  x86/fpu: Invalidate FPU state correctly on exec()

Pull irq fix from Thomas Gleixner:
 "A last minute fix for a regression introduced in the v6.5 merge
  window.

  The conversion of the software based interrupt resend mechanism to
  hlist missed to add a check whether the descriptor is already enqueued
  and dropped the interrupt descriptor lookup for nested interrupts.

  The missing check whether the descriptor is already queued causes
  hlist corruption and can be observed in the wild. The dropped parent
  descriptor lookup has not yet caused problems, but it would result in
  stale interrupt line in the worst case.

  Add the missing enqueued check and bring the descriptor lookup back to
  cure this"

* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix software resend lockup and nested resend

Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
  some trivial cleanups"

* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix hw_breakpoint_control() for watchpoints
  LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
  LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
  LoongArch: Add identifier names to arguments of die() declaration
  LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Remove <asm/export.h>
  LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
  LoongArch: Remove unneeded #include <asm/export.h>
  LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
  LoongArch: Remove redundant "source drivers/firmware/Kconfig"

The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:

First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.

This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.

Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.

Add back the corresponding code that adds the parent descriptor to the
resend list.

Fixes: bc06a9e0 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org

In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.

Otherwise we can't set read watchpoint and write watchpoint separately.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This is a port of commit 379eb01c ("riscv: Ensure the value
of FP registers in the core dump file is up to date").

The values of FP/SIMD registers in the core dump file come from the
thread.fpu. However, kernel saves the FP/SIMD registers only before
scheduling out the process. If no process switch happens during the
exception handling, kernel will not have a chance to save the latest
values of FP/SIMD registers. So it may cause their values in the core
dump file incorrect. To solve this problem, force fpr_get()/simd_get()
to save the FP/SIMD registers into the thread.fpu if the target task
equals the current task.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Commit e6bcfdd7 ("x86/microcode: Hide the config knob") removed the
MICROCODE_AMD config, but left some references in defconfigs and comments,
that have no effect on any kernel build around.

Clean up those remaining config references. No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230825141226.13566-1-lukas.bulwahn@gmail.com