From: Martin Schwidefsky <schwidefsky@de.ibm.com>

The purpose of this is to speed up system calls on s390.  I managed to
squeeze about 65 cycles from each system call.  This improved e.g.  getpid()
from 232 to 157 cycles.  As a nice side-effect it simplified the uaccess
functions considerably.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 tape driver changes:
 - Prevent offline while device is in use.
 - Do not use bus_id string in debug feature messages.
 - Check for IS_ERR(irb) error conditions in interrupt handler.
 - Fix removing tape discipline modules.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 network driver changes:
 - ctc/lcs/qeth: prevent a ccw-device to be grouped multiple times.
 - icuv: clear correct field in iucv_register_program if no userid is specified.
 - lcs: fix online/offline cycle again.
 - lcs: fix ungrouping of lcs group device. The channels of the lcs card
   should be offline afterwards.
 - lcs: don't do netif_stop_queue if no tx buffer is available, just
   return -EBUSY and drop the packets.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

z/VM monitor stream changes:
 - Correct sysctl vs. module ref-counting.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

dasd device driver changes:
 - After a state change interrupt restart all running i/o on queue
   and reset device timer.
 - Improve some debug messages.
 - Lower timeout of reserve/release/steal_lock to 2 seconds.
 - Fix BIODASDPSRD ioctl.
 - Replace ro_flag, use_diag_flag and disconnect_error_flag words by bits.
 - Use BLKPG_DEL_PARTITION ioctl instead of a call to delete_partition because
   delete_partition is not an exported function. Since dasd_destroy_partitions
   can't do blkdev_get because dasd_open would fail, keep the block device
   open as long as partitions exist. This in turn requires a different
   approach to the open vs. offline race.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 core changes:
 - Fix return type of some system call functions (long vs. int).
 - Fix prototypes for compat system call handlers.
 - Correct some bugs in the compat system call wrappers.
 - Fix broken pointer arithmetic which causes problems with
   gcc 3.4 and -march=z990
 - Remove unnecessary #ifndef & optimize inline assemblies in spinlock.h.
 - Improve handling of deferred condition code 1.
 - New default configuration.

From: badari <pbadari@us.ibm.com>

I ran into an ipc hang while trying to shutdown a database.  The problem is
due to missing sem_unlock() in find_undo().

copy_from_user() returns non-zero on faults..

This fixes a problem where cy_wait_until_sent() miscalculates (calculate
-1 on a unsigned long) the "char_time" parameter passed to
schedule_timeout().

Fix that by making it a signed long, and checking for negative value.

This helps vmware users running vmware on x86-64 - vmnet tries to set up a bridge.
Emulate these ioctls. The bridge has more ioctls on its bridge device, but these
don't seem to be needed here.

Don't register disabled nodes.  Hits on x86-64 when there is a node with no memory.
X86-64 shares this code with i386.

The newest CVS glibc assumes that Linux >=2.6.4 always passes d_type.
This patch adds this to the 32bit getdents on x86-64 too 

Patch originally from Marcus Meissner

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into intel.com:/home/lenb/src/linux-acpi-test-2.6.5

"acpi_wake_gpes_always_on" boot flag for old GPE behaviour

into intel.com:/home/lenb/src/linux-acpi-test-2.6.5

Implemented support for "wake" GPEs via interaction between
GPEs and the _PRW methods.  Every GPE that is pointed to by
one or more _PRWs is identified as a WAKE GPE and by default
will no longer be enabled at runtime.  Previously, we were
blindly enabling all GPEs with a corresponding _Lxx or _Exx
method - but most of these turn out to be WAKE GPEs anyway.
We believe this has been the cause of thousands of
"spurious" GPEs on some systems.

This new GPE behavior is can be reverted to the original
behavior (enable ALL GPEs at runtime) via a runtime flag.

Fixed a problem where aliased control methods could not
access objects properly.  The proper scope within the
namespace was not initialized (transferred to the target of
the aliased method) before executing the target method.

Fixed a potential race condition on internal object
deletion on the return object in AcpiEvaluateObject. 

Integrated a fix for resource descriptors where both
_MEM and _MTP were being extracted instead of just _MEM.
(i.e. bitmask was incorrectly too wide, 0x0F instead of 0x03.)

Added a special case for ACPI_ROOT_OBJECT in AcpiUtGetNodeName,
preventing a fault in some cases.

Updated Notify() values for debug statements in evmisc.c

Return proper status from AcpiUtMutexInitialize,
not just simply AE_OK.

into intel.com:/home/lenb/src/linux-acpi-test-2.6.5

http://bugme.osdl.org/show_bug.cgi?id=2366

Only allow get_last_written() to override get_capacity(), if it is
bigger.

I figured the best way to stop beeing bothered by users trying to run
preempt was to fix it ;)

Here's a first batch that close some races we had when testing regs->msr
for altivec or FPU enable, then doing the giveup_* function.  A preempt
in between those would have caused us to save a stale altivec or FPU
context.

The dmasound driver occasionally hangs a process on exit.

Apparently there is a possible case where the sound HW stops draining
output samples and the driver waits forever in its release() callback.
It should check for signals(), but it seems signal_pending() never
returns 1 when the process is beeing killed (implicit release() of files
on exit).

This patch adds a safety timeout to the release() function to make sure
we can at least close the driver.  I'll try to find the reason we aren't
driving samples later, but it is better to have a safety just incase the
sound clock goes berserk for some reason.

This fixes some racy code in the management of asynchronous brightness
and battery requests in the via-pmu driver used on powerbooks.  This
should fix some preempt related problems (there is no SMP powerbook yet :)

This fixes a few races in the LED code of the adbhid driver that would
affect SMP or preempt.

The ppc32 syscall entry code could access the thread info flags in a
racy way, thus potentially losing bits sets there at interrupt time or
by another CPU, like NEED_RESCHED or SIGPENDING (ouch !).

This fixes it by moving the potentially racy bit to a different field (I
preferred that rather than turning the access into an atomic operation
for performances reasons).

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Anakin has not been maintained since it was (partially) merged, and
the maintainers appear to ignore mail about it.  No one appears
willing to maintain it either.  However, some unrelated kernel
maintainers have been updating various files while they've been
working in the area - which is wasted work for something which
isn't maintained.

Therefore, this cset removes Anakin completely from the kernel.

This adds AMBA and SA11xx support for dev->coherent_dma_mask.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into intel.com:/home/lenb/src/linux-acpi-test-2.6.5

use _PRS to determine resource type for _SRS
fixes HP Proliant servers
http://bugzilla.kernel.org/show_bug.cgi?id=1590

Patch from: Daniel Ritz

This patch adds the TI clones from ENE to the override list
in yenta_socket.c.

Patch from: Arthur Othieno

This fixes a typo in arch/arm/boot/Makefile.