- 23 Apr, 2020 40 commits
-
-
Dan Carpenter authored
commit 4da0ea71 upstream. This function is only called from lpddr_probe(). We free "lpddr" both here and in the caller, so it's a double free. The best place to free "lpddr" is in lpddr_probe() so let's delete this one. Fixes: 8dc00439 ("[MTD] LPDDR qinfo probing.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountainSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frieder Schrempf authored
commit 621a7b78 upstream. When writing the bad block marker to the OOB area the access mode should be set to MTD_OPS_RAW as it is done for reading the marker. Currently this only works because req.mode is initialized to MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for req.mode != MTD_OPS_AUTO_OOB. Fix this by explicitly setting req.mode to MTD_OPS_RAW. Fixes: 7529df46 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Paul E. McKenney authored
commit 80c503e0 upstream. The __torture_print_stats() function in locktorture.c carefully initializes local variable "min" to statp[0].n_lock_acquired, but then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail field should normally be zero, and given the initialization, it seems reasonable to display the maximum and minimum number acquisitions instead of miscomputing the maximum and minimum number of failures. This commit therefore switches from failures to acquisitions. And this turns out to be not only a day-zero bug, but entirely my own fault. I hate it when that happens! Fixes: 0af3fe1e ("locktorture: Add a lock-torture kernel module") Reported-by:
Will Deacon <will@kernel.org> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Acked-by:
-
Stephen Rothwell authored
commit 3670664b upstream. ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaf ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> [mpe: Trim warnings from change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.auSigned-off-by:
-
Maxime Roussin-Bélanger authored
commit 328b50e9 upstream. The chip is configured in 24 bit mode. The values read from it must always be treated as is. This fixes the issue by replacing the previous 16 bits value by a 24 bits buffer. This changes affects the value output by previous version of the driver, since the least significant byte was missing. The upper half of 16 bit values previously output are now the upper half of a 24 bit value. Fixes: e01e7eaf ("iio: light: introduce si1133") Reported-by:
Simon Goyette <simon.goyette@gmail.com> Co-authored-by:
Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by:
Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Dan Carpenter authored
commit d3d19d6f upstream. The "fix" struct has a 2 byte hole after ->ywrapstep and the "fix = info->fix;" assignment doesn't necessarily clear it. It depends on the compiler. The solution is just to replace the assignment with an memcpy(). Fixes: 1f5e31d7 ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountainSigned-off-by:
-
Florian Fainelli authored
commit d0802dc4 upstream. Commit f949a12f ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") tried to fix the some user controlled buffer overflows in bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is not representative of what the device actually supports. Correct that by using bcm_sf2_cfp_rule_size() instead. The latter subtracts the number of rules by 1, so change the checks from greater than or equal to greater than accordingly. Fixes: f949a12f ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Chao Yu authored
[ Upstream commit dc5a9412 ] There is a race condition that we may miss to wait for all node pages writeback, fix it. - fsync() - shrink - f2fs_do_sync_file - __write_node_page - set_page_writeback(page#0) : remove DIRTY/TOWRITE flag - f2fs_fsync_node_pages : won't find page #0 as TOWRITE flag was removeD - f2fs_wait_on_node_pages_writeback : wont' wait page #0 writeback as it was not in fsync_node_list list. - f2fs_add_fsync_node_entry Fixes: 50fa53ec ("f2fs: fix to avoid broken of dnode block list") Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Adrian Huang authored
[ Upstream commit c20f3653 ] The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However, this requires 21 bits (Please see the AMD IOMMU specification). This leads to the potential failure when the bit 51 of SPA of the GCR3 table root pointer is 1'. Signed-off-by:
Adrian Huang <ahuang12@lenovo.com> Fixes: 52815b75 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f84afbdd ] The "cmd" comes from the user and it can be up to 255. It it's more than the number of bits in long, it results out of bounds read when we check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is ND_CMD_CALL (10) so I added a compare against that. Fixes: 62232e45 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jeffery Miller authored
[ Upstream commit e42fe5b2 ] The Intel Compute Stick `STK1A32SC` can have a system vendor of "Intel(R) Client Systems". Broaden the Intel Compute Stick DMI checks so that they match "Intel Corporation" as well as "Intel(R) Client Systems". This fixes an issue where the STK1A32SC compute sticks were still exposing a battery with the existing blacklist entry. Signed-off-by:
Jeffery Miller <jmiller@neverware.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 32302085 ] Fix a debug-only build error in ext2/xattr.c: When building without extra debugging, (and with another patch that uses no_printk() instead of <empty> for the ext2-xattr debug-print macros, this build error happens: ../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’: ../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in this function); did you mean ‘ext2_xattr_list’? atomic_read(&ext2_xattr_cache->c_entry_count)); Fix the problem by removing cached entry count from the debug message since otherwise we'd have to export the mbcache structure just for that. Fixes: be0726d3 ("ext2: convert to mbcache2") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 44a52022 ] When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros to use the no_printk() macro instead of <nothing>. This fixes gcc warnings when -Wextra is used: ../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] I have verified that the only object code change (with gcc 7.5.0) is the reversal of some instructions from 'cmp a,b' to 'cmp b,a'. Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.orgSigned-off-by:
-
Jacob Pan authored
[ Upstream commit 902baf61 ] Move canonical address check before mmget_not_zero() to avoid mm reference leak. Fixes: 9d8c3af3 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.") Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
[ Upstream commit b1e7396a ] Current mode validation impedes setting up some video modes which should be supported otherwise. Namely 1920x1200@60Hz. Fix this by lowering the minimum HDMI state machine clock to pixel clock ratio allowed. Fixes: 32e823c6 ("drm/vc4: Reject HDMI modes with too high of clocks.") Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Suggested-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.deSigned-off-by:
-
Chao Yu authored
[ Upstream commit 62f63eea ] BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs] Call Trace: f2fs_quota_write+0x139/0x1d0 [f2fs] write_blk+0x36/0x80 [quota_tree] get_free_dqblk+0x42/0xa0 [quota_tree] do_insert_tree+0x235/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] qtree_write_dquot+0x70/0x190 [quota_tree] v2_write_dquot+0x43/0x90 [quota_v2] dquot_acquire+0x77/0x100 f2fs_dquot_acquire+0x2f/0x60 [f2fs] dqget+0x310/0x450 dquot_transfer+0x7e/0x120 f2fs_setattr+0x11a/0x4a0 [f2fs] notify_change+0x349/0x480 chown_common+0x168/0x1c0 do_fchownat+0xbc/0xf0 __x64_sys_fchownat+0x20/0x30 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(), so that if quota file is compressed one, we can avoid above NULL pointer dereference when updating quota content. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 862f35c9 ] If we just set the mirror count to 1 without first clearing out the mirrors, we can leak queued up requests. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Jack Zhang authored
[ Upstream commit 3148a6a0 ] Originally, it kfrees the wrong pointer for mem_obj. It would cause memory leak under stress test. Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Acked-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 696ac2e3 ] Similar to commit 0266d81e ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by:
Qian Cai <cai@lca.pw> Tested-by:
Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit 1493e0f9 ] We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions. We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak. Identified by manual code inspection. I don't think this classifies as stable material. Fixes: 998f637c ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.comReviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit af9c5d2e ] compiletime_assert() uses __LINE__ to create a unique function name. This means that if you have more than one BUILD_BUG_ON() in the same source line (which can happen if they appear e.g. in a macro), then the error message from the compiler might output the wrong condition. For this source file: #include <linux/build_bug.h> #define macro() \ BUILD_BUG_ON(1); \ BUILD_BUG_ON(0); void foo() { macro(); } gcc would output: ./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0 _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1 instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so each BUILD_BUG_ON() gets a different function name and the correct condition is printed: ./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1 _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Daniel Santos <daniel.santos@pobox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 7e234520 ] "vm_committed_as.count" could be accessed concurrently as reported by KCSAN, BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35: percpu_counter_add_batch+0x83/0xd0 percpu_counter_add_batch at lib/percpu_counter.c:91 __vm_enough_memory+0xb9/0x260 dup_mm+0x3a4/0x8f0 copy_process+0x2458/0x3240 _do_fork+0xaa/0x9f0 __do_sys_clone+0x125/0x160 __x64_sys_clone+0x70/0x90 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19: __vm_enough_memory+0x199/0x260 percpu_counter_read_positive at include/linux/percpu_counter.h:81 (inlined by) __vm_enough_memory at mm/util.c:839 mmap_region+0x1b2/0xa10 do_mmap+0x45c/0x700 vm_mmap_pgoff+0xc0/0x130 ksys_mmap_pgoff+0x6e/0x300 __x64_sys_mmap+0x33/0x40 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe The read is outside percpu_counter::lock critical section which results in a data race. Fix it by adding a READ_ONCE() in percpu_counter_read_positive() which could also service as the existing compiler memory barrier. Signed-off-by:
Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pwSigned-off-by:
-
Steven Price authored
[ Upstream commit 3f3673d7 ] If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the condition (non_swap_entry(entry) && is_device_private_entry(entry)) in zap_pte_range() will never be true even if the entry is a device private one. Equally any other code depending on non_swap_entry() will not function as expected. I originally spotted this just by looking at the code, I haven't actually observed any problems. Looking a bit more closely it appears that actually this situation (currently at least) cannot occur: DEVICE_PRIVATE depends on ZONE_DEVICE ZONE_DEVICE depends on MEMORY_HOTREMOVE MEMORY_HOTREMOVE depends on MIGRATION Fixes: 5042db43 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory") Signed-off-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Long Li authored
[ Upstream commit 3946d0d0 ] When encryption is used, smb2_transform_hdr is defined on the stack and is passed to the transport. This doesn't work with RDMA as the buffer needs to be DMA'ed. Fix it by using kmalloc. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
[ Upstream commit 6e682d53 ] On the hypervisor side, when completing commands and the pipe is full, we retry writing only the entries that failed, by offsetting io_req_buffer, but we don't reduce the number of bytes written, which can cause a buffer overrun of io_req_buffer, and write garbage to the pipe. Cc: Martyn Welch <martyn.welch@collabora.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Eric Sandeen authored
[ Upstream commit c96e2b85 ] Under some circumstances we may encounter a filesystem error on a read-only block device, and if we try to save the error info to the superblock and commit it, we'll wind up with a noisy error and backtrace, i.e.: [ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 ... To avoid this, commit the error info in the superblock only if the block device is writable. Reported-by:
Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.netSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 4141b6a5 ] When perf record -e SF_CYCLES_BASIC_DIAG runs with very high frequency, the samples arrive faster than the perf process can save them to file. Eventually, for longer running processes, this leads to the siutation where the trace buffers allocated by perf slowly fills up. At one point the auxiliary trace buffer is full and the CPU Measurement sampling facility is turned off. Furthermore a warning is printed to the kernel log buffer: cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling mode is full The number of allocated pages for the auxiliary trace buffer is shown as zero pages. That is wrong. Fix this by saving the number of allocated pages before entering the work loop in the interrupt handler. When the interrupt handler processes the samples, it may detect the buffer full condition and stop sampling, reducing the buffer size to zero. Print the correct value in the error message: cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling mode is full Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit af6cf95c ] When building ppc64 defconfig, Clang errors (trimmed for brevity): arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] machine_device_initcall(maple, maple_cpc925_edac_setup); ^ machine_device_initcall expands to __define_machine_initcall, which in turn has the macro machine_is used in it, which declares mach_##name with an __attribute__((weak)). define_machine actually defines mach_##name, which in this file happens before the declaration, hence the warning. To fix this, move define_machine after machine_device_initcall so that the declaration occurs before the definition, which matches how machine_device_initcall and define_machine work throughout arch/powerpc. While we're here, remove some spaces before tabs. Fixes: 8f101a05 ("edac: cpc925 MC platform device setup") Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Alexander Gordeev authored
[ Upstream commit 872f2710 ] /proc/cpuinfo should not print information about CPU 0 when it is offline. Fixes: 281eaa8c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: shortened commit message] Signed-off-by:
-
Misono Tomohiro authored
[ Upstream commit 8605cf0e ] When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is initialized to 2. Therefore we need to call nfs_direct_req_release() twice to release the allocated dreq. Usually it is called in nfs_file_direct_{read, write}() and nfs_direct_complete(). However, current code only calls nfs_direct_req_relese() once if nfs_get_lock_context() fails in nfs_file_direct_{read, write}(). So, that case would result in memory leak. Fix this by adding the missing call. Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit d911c57a ] Make sure to test the stateid for validity so that we catch instances where the server may have been reusing stateids in nfs_layout_find_inode_by_stateid(). Fixes: 7b410d9c ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers") Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 9cf4789e ] The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Also remove the unnecessary error message as the core already prints the info. Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit e0ea2d11 ] Currently we wait only until the PGC inverts the isolation setting before disabling the peripheral clocks. This doesn't ensure that the reset is properly propagated through the peripheral devices in the power domain. Wait until the PGC signals that the power up request is done and wait a bit for resets to propagate before disabling the clocks. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Sowjanya Komatineni authored
[ Upstream commit 6fe38aa8 ] Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 583b53ec ] The driver fails to probe with -EPROBE_DEFER if battery's power supply (charger driver) isn't ready yet and this results in a bit noisy error message in KMSG during kernel's boot up. Let's silence the harmless error message. Signed-off-by:
Andrew F. Davis <afd@ti.com> Reviewed-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
Claudiu Beznea authored
[ Upstream commit b0ecf1c6 ] clk_hw_round_rate() may call round rate function of its parents. In case of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are controlled by clk-sam9x60-pll.c driver. The round rate function for this driver is sam9x60_pll_round_rate() which call in turn sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the proper range (rate < characteristics->output[0].min && rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will return a negative number to its caller (called by clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in case a negative number is returned by clk_core_round_rate_nolock(). With this, the USB clock will continue its rate computation even caller of clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60 may not chose the best parent. I detected this after a suspend/resume cycle on SAM9X60. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Tianyu Lan authored
[ Upstream commit f3a99e76 ] When oops happens with panic_on_oops unset, the oops thread is killed by die() and system continues to run. In such case, guest should not report crash register data to host since system still runs. Check panic_on_oops and return directly in hyperv_report_panic() when the function is called in the die() and panic_on_oops is unset. Fix it. Fixes: 7ed4325a ("Drivers: hv: vmbus: Make panic reporting to be more useful") Signed-off-by:
Tianyu Lan <Tianyu.Lan@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.comSigned-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Tianyu Lan authored
[ Upstream commit 040026df ] When sysctl_record_panic_msg is not set, the panic will not be reported to Hyper-V via hyperv_report_panic_msg(). So the crash should be reported via hyperv_report_panic(). Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by:
-
Tianyu Lan authored
[ Upstream commit 73f26e52 ] When a guest VM panics, Hyper-V should be notified only once via the crash synthetic MSRs. Current Linux code might write these crash MSRs twice during a system panic: 1) hyperv_panic/die_event() calling hyperv_report_panic() 2) hv_kmsg_dump() calling hyperv_report_panic_msg() Fix this by not calling hyperv_report_panic() if a kmsg dump has been successfully registered. The notification will happen later via hyperv_report_panic_msg(). Fixes: 7ed4325a ("Drivers: hv: vmbus: Make panic reporting to be more useful") Reviewed-by:
-
Tianyu Lan authored
[ Upstream commit 7f11a2cc ] If kmsg_dump_register() fails, hv_panic_page will not be used anywhere. So free and reset it. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by:
-
