- 17 Dec, 2019 40 commits
-
-
Ming Lei authored
commit 2a5cf35c upstream. There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d0 ("blk-mq: fix discard merge with scheduler attached") Reported-by:
Jens Axboe <axboe@kernel.dk> Cc: Guangwu Zhang <guazhang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Mahoney authored
commit 60e4cf67 upstream. Since commit d0a5b995 (vfs: Add IOP_XATTR inode operations flag) extended attributes haven't worked on the root directory in reiserfs. This is due to reiserfs conditionally setting the sb->s_xattrs handler array depending on whether it located or create the internal privroot directory. It necessarily does this after the root inode is already read in. The IOP_XATTR flag is set during inode initialization, so it never gets set on the root directory. This commit unconditionally assigns sb->s_xattrs and clears IOP_XATTR on internal inodes. The old return values due to the conditional assignment are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS would have done. Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com CC: stable@vger.kernel.org Fixes: d0a5b995 ("vfs: Add IOP_XATTR inode operations flag") Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 65db869c upstream. Estimate for the number of credits needed for final freeing of inode in ext4_evict_inode() was to small. We may modify 4 blocks (inode & sb for orphan deletion, bitmap & group descriptor for inode freeing) and not just 3. [ Fixed minor whitespace nit. -- TYT ] Fixes: e50e5129 ("ext4: xattr-in-inode support") CC: stable@vger.kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dmitry Monakhov authored
commit 6ff33d99 upstream. Write only quotas which are dirty at entry. XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by:
-
Chengguang Xu authored
commit e705f4b8 upstream. Check err when partial == NULL is meaningless because partial == NULL means getting branch successfully without error. CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.netSigned-off-by:
Chengguang Xu <cgxu519@mykernel.net> Signed-off-by:
-
Dmitry Monakhov authored
commit df4bb5d1 upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
commit 6039f37d upstream. The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f37 ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.comReviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Cédric Le Goater authored
commit b67a95f2 upstream. The PCI INTx interrupts and other LSI interrupts are handled differently under a sPAPR platform. When the interrupt source characteristics are queried, the hypervisor returns an H_INT_ESB flag to inform the OS that it should be using the H_INT_ESB hcall for interrupt management and not loads and stores on the interrupt ESB pages. A default -1 value is returned for the addresses of the ESB pages. The driver ignores this condition today and performs a bogus IO mapping. Recent changes and the DEBUG_VM configuration option make the bug visible with : kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=1024 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-0.rc6.git0.1.fc32.ppc64le #1 NIP: c000000000f63294 LR: c000000000f62e44 CTR: 0000000000000000 REGS: c0000000fa45f0d0 TRAP: 0700 Not tainted (5.4.0-0.rc6.git0.1.fc32.ppc64le) ... NIP ioremap_page_range+0x4c4/0x6e0 LR ioremap_page_range+0x74/0x6e0 Call Trace: ioremap_page_range+0x74/0x6e0 (unreliable) do_ioremap+0x8c/0x120 __ioremap_caller+0x128/0x140 ioremap+0x30/0x50 xive_spapr_populate_irq_data+0x170/0x260 xive_irq_domain_map+0x8c/0x170 irq_domain_associate+0xb4/0x2d0 irq_create_mapping+0x1e0/0x3b0 irq_create_fwspec_mapping+0x27c/0x3e0 irq_create_of_mapping+0x98/0xb0 of_irq_parse_and_map_pci+0x168/0x230 pcibios_setup_device+0x88/0x250 pcibios_setup_bus_devices+0x54/0x100 __of_scan_bus+0x160/0x310 pcibios_scan_phb+0x330/0x390 pcibios_init+0x8c/0x128 do_one_initcall+0x60/0x2c0 kernel_init_freeable+0x290/0x378 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x80 Fixes: bed81ee1 ("powerpc/xive: introduce H_INT_ESB hcall") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Cédric Le Goater <clg@kaod.org> Tested-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191203163642.2428-1-clg@kaod.orgSigned-off-by:
-
Alastair D'Silva authored
commit 29430fae upstream. When calling flush_icache_range with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Cédric Le Goater authored
commit 1ca3dec2 upstream. When the machine crash handler is invoked, all interrupts are masked but interrupts which have not been started yet do not have an ESB page mapped in the Linux address space. This crashes the 'crash kexec' sequence on sPAPR guests. To fix, force the mapping of the ESB page when an interrupt is being mapped in the Linux IRQ number space. This is done by setting the initial state of the interrupt to OFF which is not necessarily the case on PowerNV. Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Alastair D'Silva authored
commit f9ec1116 upstream. When calling __kernel_sync_dicache with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
-
Arnd Bergmann authored
commit 99817404 upstream. Going through the uses of timeval in the user space API, I noticed two bugs in ppdev that were introduced in the y2038 conversion: * The range check was accidentally moved from ppsettime to ppgettime * On sparc64, the microseconds are in the other half of the 64-bit word. Fix both, and mark the fix for stable backports. Cc: stable@vger.kernel.org Fixes: 3b9ab374 ("ppdev: convert to y2038 safe") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.deSigned-off-by:
-
Jarkko Nikula authored
commit 287897f9 upstream. The MMC card detection GPIO polarity is active low on TAO3530, like in many other similar boards. Now the card is not detected and it is unable to mount rootfs from an SD card. Fix this by using the correct polarity. This incorrect polarity was defined already in the commit 30d95c6d ("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18 kernel and later changed to use defined GPIO constants in v4.4 kernel by the commit 3a637e00 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards"). While the latter commit did not introduce the issue I'm marking it with Fixes tag due the v4.4 kernels still being maintained. Fixes: 3a637e00 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards") Cc: linux-stable <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
H. Nikolaus Schaller authored
commit f6498b92 upstream. Pandora_wl1251_init_card was used to do special pdata based setup of the sdio mmc interface. This does no longer work with v4.7 and later. A fix requires a device tree based mmc3 setup. Therefore we move the special setup to omap_hsmmc.c instead of calling some pdata supplied init_card function. The new code checks for a DT child node compatible to wl1251 so it will not affect other MMC3 use cases. Generally, this code was and still is a hack and should be moved to mmc core to e.g. read such properties from optional DT child nodes. Fixes: 81eef6ca ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ [Ulf: Fixed up some checkpatch complaints] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 7f028caa upstream. In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 61dd7261 ("pinctrl: Add pinctrl-s3c64xx driver") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit a322b337 upstream. Several functions use for_each_child_of_node() loop with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 9a2c1c3b ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes") Signed-off-by:
-
Krzysztof Kozlowski authored
commit 6fbbcb05 upstream. In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: af99a750 ("pinctrl: Add pinctrl-s3c24xx driver") Signed-off-by:
-
Krzysztof Kozlowski authored
commit 5c7f48dd upstream. In exynos_eint_wkup_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 43b169db ("pinctrl: add exynos4210 specific extensions for samsung pinctrl driver") Signed-off-by:
-
Nishka Dasgupta authored
commit 3d2557ab upstream. Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return of exynos_eint_wkup_init() error path. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Cc: <stable@vger.kernel.org> Fixes: 14c255d3 ("pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts") Signed-off-by:
-
Gregory CLEMENT authored
commit 04fb0275 upstream. As explained in the following commit a9a1a483 ("pinctrl: armada-37xx: Fix gpio interrupt setup") the armada_37xx_irq_set_type() function can be called before the initialization of the mask field. That means that we can't use this field in this function and need to workaround it using hwirq. Fixes: 30ac0d3b ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: stable@vger.kernel.org Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191115155752.2562-1-gregory.clement@bootlin.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit b9ea0bae upstream. Certain ACPI-enumerated devices represented as platform devices in Linux, like fans, require special low-level power management handling implemented by their drivers that is not in agreement with the ACPI PM domain behavior. That leads to problems with managing ACPI fans during system-wide suspend and resume. For this reason, make acpi_dev_pm_attach() skip the affected devices by adding a list of device IDs to avoid to it and putting the IDs of the affected devices into that list. Fixes: e5cc8ef3 (ACPI / PM: Provide ACPI PM callback routines for subsystems) Reported-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Vamshi K Sthambamkadi authored
commit 627ead72 upstream. kmemleak reported backtrace: [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260 [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0 [<1180f4fc>] i2c_register_adapter+0x186/0x400 [<6083baf7>] i2c_add_adapter+0x4e/0x70 [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915] [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915] [<81911d4b>] i915_pci_probe+0x48/0x160 [i915] [<4b159af1>] pci_device_probe+0xdc/0x160 [<b3c64704>] really_probe+0x1ee/0x450 [<bc029f5a>] driver_probe_device+0x142/0x1b0 [<d8829d20>] device_driver_attach+0x49/0x50 [<de71f045>] __driver_attach+0xc9/0x150 [<df33ac83>] bus_for_each_dev+0x56/0xa0 [<80089bba>] driver_attach+0x19/0x20 [<cc73f583>] bus_add_driver+0x177/0x220 [<7b29d8c7>] driver_register+0x56/0xf0 In i2c_acpi_remove_space_handler(), a leak occurs whenever the "data" parameter is initialized to 0 before being passed to acpi_bus_get_private_data(). This is because the NULL pointer check in acpi_bus_get_private_data() (condition->if(!*data)) returns EINVAL and, in consequence, memory is never freed in i2c_acpi_remove_space_handler(). Fix the NULL pointer check in acpi_bus_get_private_data() to follow the analogous check in acpi_get_data_full(). Signed-off-by:
Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Francesco Ruggeri authored
commit 833a426c upstream. acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock before freeing the map. This creates a race condition the can result in the map being freed more than once. A panic can be caused by running for ((i=0; i<10; i++)) do for ((j=0; j<100000; j++)) do cat /sys/firmware/acpi/tables/data/BERT >/dev/null done & done This patch makes sure that only the process that drops the reference to 0 does the freeing. Fixes: b7c1fadd ("ACPI: Do not use krefs under a mutex in osl.c") Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Mika Westerberg authored
commit 77adf935 upstream. Valerio and others reported that commit 84c8b58e ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug") prevents some recent LG and HP laptops from booting with endless loop of: ACPI Error: No handler or method for GPE 08, disabling event (20190215/evgpe-835) ACPI Error: No handler or method for GPE 09, disabling event (20190215/evgpe-835) ACPI Error: No handler or method for GPE 0A, disabling event (20190215/evgpe-835) ... What seems to happen is that during boot, after the initial PCI enumeration when EC is enabled the platform triggers ACPI Notify() to one of the root ports. The root port itself looks like this: pci 0000:00:1b.0: PCI bridge to [bus 02-3a] pci 0000:00:1b.0: bridge window [mem 0xc4000000-0xda0fffff] pci 0000:00:1b.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref] The BIOS has configured the root port so that it does not have I/O bridge window. Now when the ACPI Notify() is triggered ACPI hotplug handler calls acpiphp_native_scan_bridge() for each non-hotplug bridge (as this system is using native PCIe hotplug) and pci_assign_unassigned_bridge_resources() to allocate resources. The device connected to the root port is a PCIe switch (Thunderbolt controller) with two hotplug downstream ports. Because of the hotplug ports __pci_bus_size_bridges() tries to add "additional I/O" of 256 bytes to each (DEFAULT_HOTPLUG_IO_SIZE). This gets further aligned to 4k as that's the minimum I/O window size so each hotplug port gets 4k I/O window and the same happens for the root port (which is also hotplug port). This means 3 * 4k = 12k I/O window. Because of this pci_assign_unassigned_bridge_resources() ends up opening a I/O bridge window for the root port at first available I/O address which seems to be in range 0x1000 - 0x3fff. Normally this range is used for ACPI stuff such as GPE bits (below is part of /proc/ioports): 1800-1803 : ACPI PM1a_EVT_BLK 1804-1805 : ACPI PM1a_CNT_BLK 1808-180b : ACPI PM_TMR 1810-1815 : ACPI CPU throttle 1850-1850 : ACPI PM2_CNT_BLK 1854-1857 : pnp 00:05 1860-187f : ACPI GPE0_BLK However, when the ACPI Notify() happened this range was not yet reserved for ACPI/PNP (that happens later) so PCI gets it. It then starts writing to this range and accidentally stomps over GPE bits among other things causing the endless stream of messages about missing GPE handler. This problem does not happen if "pci=hpiosize=0" is passed in the kernel command line. The reason is that then the kernel does not try to allocate the additional 256 bytes for each hotplug port. Fix this by allocating resources directly below the non-hotplug bridges where a new device may appear as a result of ACPI Notify(). This avoids the hotplug bridges and prevents opening the additional I/O window. Fixes: 84c8b58e ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug") Link: https://bugzilla.kernel.org/show_bug.cgi?id=203617 Link: https://lore.kernel.org/r/20191030150545.19885-1-mika.westerberg@linux.intel.comReported-by:
Valerio Passini <passini.valerio@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
-
John Hubbard authored
commit db0d32d8 upstream. The following build warning occurred on powerpc 64-bit builds: drivers/cpufreq/powernv-cpufreq.c: In function 'init_chip_info': drivers/cpufreq/powernv-cpufreq.c:1070:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] This is with a cross-compiler based on gcc 8.1.0, which I got from: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/ The warning is due to putting 1024 bytes on the stack: unsigned int chip[256]; ...and it's also undesirable to have a hard limit on the number of CPUs here. Fix both problems by dynamically allocating based on num_possible_cpus, as recommended by Michael Ellerman. Fixes: 053819e0 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level") Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by:
-
Leonard Crestez authored
commit 2abb0d52 upstream. There is no locking in this sysfs show function so stats printing can race with a devfreq_update_status called as part of freq switching or with initialization. Also add an assert in devfreq_update_status to make it clear that lock must be held by caller. Fixes: 39688ce6 ("PM / devfreq: account suspend/resume for stats") Cc: stable@vger.kernel.org Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Alexander Shishkin authored
commit 6e6c18bc upstream. This adds support for the Trace Hub in Tiger Lake CPU. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191120130806.44028-4-alexander.shishkin@linux.intel.comSigned-off-by:
-
Alexander Shishkin authored
commit 6a174342 upstream. This adds support for the Trace Hub in Ice Lake CPU. Signed-off-by:
-
Alexander Shishkin authored
commit 51259277 upstream. Commit a753bfcf ("intel_th: Make the switch allocate its subdevices") factored out intel_th_subdevice_alloc() from intel_th_populate(), but got the error path wrong, resulting in two instances of a double put_device() on a freshly initialized, but not 'added' device. Fix this by only doing one put_device() in the error path. Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Reviewed-by:
-
Gao Xiang authored
commit 926d1650 upstream. As David reported [1], ENODATA returns when attempting to modify files by using EROFS as an overlayfs lower layer. The root cause is that listxattr could return unexpected -ENODATA by mistake for inodes without xattr. That breaks listxattr return value convention and it can cause copy up failure when used with overlayfs. Resolve by zeroing out if no xattr is found for listxattr. [1] https://lore.kernel.org/r/CAEvUa7nxnby+rxK-KRMA46=exeOMApkDMAV08AjMkkPnTPV4CQ@mail.gmail.com Link: https://lore.kernel.org/r/20191201084040.29275-1-hsiangkao@aol.com Fixes: cadf1ccf ("staging: erofs: add error handling for xattr submodule") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 918c1fe9 upstream. Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has a driver different from drv already and, if so, return -EBUSY before updating any cpuidle_drivers per-CPU pointers. Fixes: 82467a5a ("cpuidle: simplify multiple driver support") Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Hans Verkuil authored
commit 806e0cdf upstream. CEC_OP_REC_FLAG_NOT_USED is 0 and CEC_OP_REC_FLAG_USED is 1, not the other way around. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by:
Jiunn Chang <c0d1n61at3@gmail.com> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 1091eb83 upstream. If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50c ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 11609a7e upstream. If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebb ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Gerald Schaefer authored
commit ab874f22 upstream. On older HW or under a hypervisor, w/o the instruction-execution- protection (IEP) facility, and also w/o EDAT-1, a translation-specification exception may be recognized when bit 55 of a pte is one (_PAGE_NOEXEC). The current code tries to prevent setting _PAGE_NOEXEC in such cases, by removing it within set_pte_at(). However, ptep_set_access_flags() will modify a pte directly, w/o using set_pte_at(). There is at least one scenario where this can result in an active pte with _PAGE_NOEXEC set, which would then lead to a panic due to a translation-specification exception (write to swapped out page): do_swap_page pte = mk_pte (with _PAGE_NOEXEC bit) set_pte_at (will remove _PAGE_NOEXEC bit in page table, but keep it in local variable pte) vmf->orig_pte = pte (pte still contains _PAGE_NOEXEC bit) do_wp_page wp_page_reuse entry = vmf->orig_pte (still with _PAGE_NOEXEC bit) ptep_set_access_flags (writes entry with _PAGE_NOEXEC bit) Fix this by clearing _PAGE_NOEXEC already in mk_pte_phys(), where the pgprot value is applied, so that no pte with _PAGE_NOEXEC will ever be visible, if it is not supported. The check in set_pte_at() can then also be removed. Cc: <stable@vger.kernel.org> # 4.11+ Fixes: 57d7f939 ("s390: add no-execute support") Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Denis Efremov authored
commit 315cee42 upstream. memcpy() call with "idata == NULL && ilen == 0" results in undefined behavior in ar5523_cmd(). For example, NULL is passed in callchain "ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch adds ilen check before memcpy() call in ar5523_cmd() to prevent an undefined behavior. Cc: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Aleksa Sarai authored
commit a713af39 upstream. Because pids->limit can be changed concurrently (but we don't want to take a lock because it would be needlessly expensive), use atomic64_ts instead. Fixes: commit 49b786ea ("cgroup: implement the PIDs subsystem") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
Aleksa Sarai <cyphar@cyphar.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ming Lei authored
commit 8962842c upstream. It is reported that sysfs buffer overflow can be triggered if the system has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of hctx via /sys/block/$DEV/mq/$N/cpu_list. Use snprintf to avoid the potential buffer overflow. This version doesn't change the attribute format, and simply stops showing CPU numbers if the buffer is going to overflow. Cc: stable@vger.kernel.org Fixes: 676141e4("blk-mq: don't dump CPU -> hw queue map on driver load") Signed-off-by:
-
David Jeffery authored
commit 775d7831 upstream. If pers->make_request fails in md_flush_request(), the bio is lost. To fix this, pass back a bool to indicate if the original make_request call should continue to handle the I/O and instead of assuming the flush logic will push it to completion. Convert md_flush_request to return a bool and no longer calls the raid driver's make_request function. If the return is true, then the md flush logic has or will complete the bio and the md make_request call is done. If false, then the md make_request function needs to keep processing like it is a normal bio. Let the original call to md_handle_request handle any need to retry sending the bio to the raid driver's make_request function should it be needed. Also mark md_flush_request and the make_request function pointer as __must_check to issue warnings should these critical return values be ignored. Fixes: 2bc13b83 ("md: batch flush requests.") Cc: stable@vger.kernel.org # # v4.19+ Cc: NeilBrown <neilb@suse.com> Signed-off-by:
David Jeffery <djeffery@redhat.com> Reviewed-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Pawel Harlozinski authored
commit 8f157d4f upstream. Check for existance of jack before tracing. NULL pointer dereference has been reported by KASAN while unloading machine driver (snd_soc_cnl_rt274). Signed-off-by:
Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
