- 21 Nov, 2016 1 commit
-
-
http://github.com/zourongrong/linuxDave Airlie authored
hibmc drm driver for hisilicon. * tag 'drm-hisilicon-next-2016-11-17' of http://github.com/zourongrong/linux: MAINTAINERS: Update HISILICON DRM entries drm/hisilicon/hibmc: Add support for vblank interrupt drm/hisilicon/hibmc: Add support for VDAC drm/hisilicon/hibmc: Add support for display engine drm/hisilicon/hibmc: Add support for frame buffer drm/hisilicon/hibmc: Add video memory management drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver
-
- 17 Nov, 2016 8 commits
-
-
Rongrong Zou authored
Signed-off-by:
Rongrong Zou <zourongrong@gmail.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Xinliang Liu <xinliang.liu@linaro.org> Acked-by:
-
Rongrong Zou authored
Add vblank interrupt. Signed-off-by:
-
Rongrong Zou authored
VDAC(Video Digital-to-Analog converter) converts the RGB diaital data stream from DE to VGA analog signals. Signed-off-by:
-
Rongrong Zou authored
Add display engine function, crtc/plane is initialized here. Signed-off-by:
-
Rongrong Zou authored
Add support for fbdev and kms fb management. Signed-off-by:
-
Rongrong Zou authored
Hibmc have 32m video memory which can be accessed through PCIe by host, we use ttm to manage these memory. Signed-off-by:
-
Rongrong Zou authored
Add DRM master driver for Hisilicon Hibmc SoC which used for Out-of-band management. Blow is the general hardware connection, both the Hibmc and the host CPU are on the same mother board. +----------+ +----------+ | | PCIe | Hibmc | |host CPU( |<----->| display | |arm64,x86)| |subsystem | +----------+ +----------+ Signed-off-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
- GP102/GP104 devinit (suspend/resume, optimus) hang fix - GP102/GP104 hardware cursor fix - Fix for a regression on some non-MST monitors that was caused by the MST work - Workaround for certain laptops where ACPI sends display hotkey presses on a modeset, causing gnome-settings-daemon to go into a continuous loop * 'linux-4.10' of git://github.com/skeggsb/linux: drm/nouveau/disp/gp102: rename from gp104 drm/nouveau/ce/gp102: rename from gp104 drm/nouveau/fb/gp102: rename from gp104 drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices drm/nouveau/disp/nv50-: specify ctrl/user separately when constructing classes drm/nouveau/disp/nv50-: split chid into chid.ctrl and chid.user drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE drm/nouveau/devinit/gm200: drop pmu reset sequence drm/nouveau/devinit/gm200: replace while loops with PTIMER-based timeout loops drm/nouveau/pmu/gp102: initial implementation drm/nouveau/pmu/gp100: initial implementation drm/nouveau/pmu: execute reset before running devinit drm/nouveau/pmu: move ucode handling into gt215 implementation drm/nouveau/core: initial support for GP102 drm/nouveau/device/pci: fix oops if no mmu subdev present drm/nouveau/kms/nv50: avoid touching DP_MSTM_CTRL if !DP_MST_CAP
-
- 16 Nov, 2016 24 commits
-
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
GP102/GP104 make life difficult by redefining the channel indices for some registers, but not others. Signed-off-by: -
Hans de Goede authored
Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by:Hans de Goede <hdegoede@redhat.com>
-
Ben Skeggs authored
This sequence is incorrect for GP102/GP104 boards. This is now being handled correctly by the PMU subdev during preinit(); Signed-off-by: -
Ben Skeggs authored
It appears to be safe to access PTIMER on an unposted board with newer chipsets. Signed-off-by: -
Ben Skeggs authored
GP102/GP104 require a harder reset of PMU prior to DEVINIT, or the IFR image will hang. Signed-off-by: -
Ben Skeggs authored
Just enough to hookup preinit reset(), which DEVINIT will depend on later. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
From visual inspection of traces, what we currently implement appears to be identical to GP104. Seems to work well enough too. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Fixes certain displays not being detected due to DPAUX errors. Signed-off-by: -
https://github.com/anholt/linuxDave Airlie authored
This pull request brings in fragment shader threading and ETC1 support for vc4.
-
git://git.armlinux.org.uk/~rmk/linux-armDave Airlie authored
Fix conncector registration with tda998x. * 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm: drm/i2c: tda998x: mali-dp: hdlcd: refactor connector registration
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Another pile of misc: - Explicit fencing for atomic! Big thanks to Gustavo, Sean, Rob 3x, Brian and anyone else I've forgotten to make this happen. - roll out fbdev helper ops to drivers (Stefan Christ) - last bits of drm_crtc split-up&kerneldoc - some drm_irq.c crtc functions cleanup - prepare_fb helper for cma, works correctly with explicit fencing (Marek Vasut) - misc small patches all over * tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc: (51 commits) drm/fence: add out-fences support drm/fence: add fence timeline to drm_crtc drm/fence: add in-fences support drm/bridge: analogix_dp: return error if transfer none byte drm: drm_irq.h header cleanup drm/irq: Unexport drm_vblank_on/off drm/irq: Unexport drm_vblank_count drm/irq: Make drm_vblank_pre/post_modeset internal drm/nouveau: Use drm_crtc_vblank_off/on drm/amdgpu: Use drm_crtc_vblank_on/off for dce6 drm/color: document NULL values and default settings better drm: Drop externs from drm_crtc.h drm: Move tile group code into drm_connector.c drm: Extract drm_mode_config.[hc] Revert "drm: Add aspect ratio parsing in DRM layer" Revert "drm: Add and handle new aspect ratios in DRM layer" drm/print: Move kerneldoc next to definition drm: Consolidate dumb buffer docs drm: Clean up kerneldoc for struct drm_driver drm: Extract drm_drv.h ...
-
Jonas Pfeil authored
FS threading brings performance improvements of 0-20% in glmark2. The validation code checks for thread switch signals and ensures that the registers of the other thread are not touched, and that our clamps are not live across thread switches. It also checks that the threading and branching instructions do not interfere. (Original patch by Jonas, changes by anholt for style cleanup, removing validation the kernel doesn't need to do, and adding the flag for userspace). v2: Minor style fixes from checkpatch. Signed-off-by:
Jonas Pfeil <pfeiljonas@gmx.de> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Gustavo Padovan authored
Support DRM out-fences by creating a sync_file with a fence for each CRTC that sets the OUT_FENCE_PTR property. We use the out_fence pointer received in the OUT_FENCE_PTR prop to send the sync_file fd back to userspace. The sync_file and fd are allocated/created before commit, but the fd_install operation only happens after we know that commit succeed. v2: Comment by Rob Clark: - Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here. Comment by Daniel Vetter: - Add clean up code for out_fences v3: Comments by Daniel Vetter: - create DRM_MODE_ATOMIC_EVENT_MASK - userspace should fill out_fences_ptr with the crtc_ids for which it wants fences back. v4: Create OUT_FENCE_PTR properties and remove old approach. v5: Comments by Brian Starkey: - Remove extra fence_get() in atomic_ioctl() - Check ret before iterating on the crtc_state - check ret before fd_install - set fence_state to NULL at the beginning - check fence_state->out_fence_ptr before put_user() - change order of fput() and put_unused_fd() on failure - Add access_ok() check to the out_fence_ptr received - Rebase after fence -> dma_fence rename - Store out_fence_ptr in the drm_atomic_state - Split crtc_setup_out_fence() - return -1 as out_fence with TEST_ONLY flag v6: Comments by Daniel Vetter - Add prepare/unprepare_crtc_signaling() - move struct drm_out_fence_state to drm_atomic.c - mark get_crtc_fence() as static Comments by Brian Starkey - proper set fence_ptr fence_state array - isolate fence_idx increment - improve error handling v7: Comments by Daniel Vetter - remove prefix from internal functions - make out_fence_ptr an s64 pointer - degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail - fix doc issues - filter out OUT_FENCE_PTR == NULL and do not fail in this case - add complete_crtc_signalling() - krealloc fence_state on demand Comment by Brian Starkey - remove unused crtc_state arg from get_out_fence() v8: Comment by Brian Starkey - cancel events before check for !fence_state - convert a few lefovers u64 types for out_fence_ptr - fix memleak by assign fence_state earlier after realloc - proper accout num_fences in case of error v9: Comment by Brian Starkey - memset last position of fence_state after krealloc Comments by Sean Paul - pass install_fds in complete_crtc_signaling() instead of ret - put_user(-1, fence_ptr) when decoding props v10: Comment by Brian Starkey - remove unneeded num_fences increment on error path - kfree fence_state after installing fences fd v11: rebase against latest drm-misc v12: rebase again against latest drm-misc Signed-off-by:Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10) Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
-
Gustavo Padovan authored
Create one timeline context for each CRTC to be able to handle out-fences and signal them. It adds a few members to struct drm_crtc: fence_context, where we store the context we get from fence_context_alloc(), the fence seqno and the fence lock, that we pass in fence_init() to be used by the fence. v2: Comment by Daniel Stone: - add BUG_ON() to fence_to_crtc() macro v3: Comment by Ville Syrjälä - Use more meaningful name as crtc timeline name v4: Comments by Brian Starkey - Use even more meaninful name for the crtc timeline - add doc for timeline_name Comment by Daniel Vetter - use in-line style for comments - rebase after fence -> dma_fence rename v5: Comment by Daniel Vetter - Add doc for drm_crtc_fence_ops v6: Comment by Chris Wilson - Move fence_to_crtc to drm_crtc.c - Move export of drm_crtc_fence_ops to drm_crtc_internal.h - rebase against latest drm-misc Signed-off-by: -
Gustavo Padovan authored
There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by:Brian Starkey <brian.starkey@arm.com> Reviewed-by:
Robert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by:
-
Jianqun Xu authored
Reference from drm_dp_aux description (about transfer): Upon success, the implementation should return the number of payload bytes that were transferred, or a negative error-code on failure. Helpers propagate errors from the .transfer() function, with the exception of the -EBUSY error, which causes a transaction to be retried. On a short, helpers will return -EPROTO to make it simpler to check for failure. The analogix_dp_transfer will return num_transferred, but if there is none byte been transferred, the return value will be 0, which means success, we should return error-code if transfer none byte. for (retry = 0; retry < 32; retry++) { err = aux->transfer(aux, &msg); if (err < 0) { if (err == -EBUSY) continue; goto unlock; } } Cc: zain wang <wzz@rock-chips.com> Reviewed-by:Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1479255219-7243-1-git-send-email-jay.xu@rock-chips.com
-
- 15 Nov, 2016 7 commits
-
-
Dave Airlie authored
Merge tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next sun4i-drm changes for 4.10 Support for the Allwinner A31 SoC display engine using the sun4i-drm driver. * tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: Add a few formats drm/sun4i: Add compatible strings for A31/A31s display pipelines drm/sun4i: Add compatible string for A31/A31s TCON (timing controller) drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure drm/sun4i: sun6i-drc: Support DRC on A31 and A31s
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
rcar-du -next branch. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Fix LVDS start sequence on Gen3 drm: rcar-du: Fix H/V sync signal polarity configuration drm: rcar-du: Fix display timing controller parameter drm: rcar-du: Fix dot clock routing configuration drm: rcar-du: Add R8A7796 support drm: rcar-du: Add R8A7792 support drm: rcar-du: Simplify and fix probe error handling drm: rcar-du: Fix crash in encoder failure error path drm: rcar-du: Remove memory allocation error message drm: rcar-du: Remove test for impossible error condition drm: rcar-du: Bring HDMI encoder comments in line with the driver drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init() video: of: Constify node argument to display timing functions
-
Daniel Vetter authored
- Drop extern for functions, it's noise. - Move&consolidate drm.ko internal parts into drm-internal.h. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-6-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Only remaining use was in amdgpu, and trivial to convert over to drm_crtc_vblank_* variants. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by:
-
Daniel Vetter authored
No one outside of drm_irq.c should ever need this. The correct way to implement get_vblank_count for hw lacking a vblank counter is drm_vblank_no_hw_counter. Fix this up in mtk, which is the only offender left over. Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Daniel Vetter authored
Now that all drivers are switched over to drm_crtc_vblank_on/off we can relegate pre/post_modeset to the purely drm_irq.c internal role of supporting old ums userspace. As usual switch to the drm_legacy_ prefix to make it clear this is for old drivers only. v2: Rebase on top of Thierry's s/int crtc/unsigned int pipe/ changes. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Daniel Vetter authored
With atomic nv50+ is already converted over to them, but the old display code is still using it. Found in a 2 year old patch I have lying around to un-export these old helpers! v2: Drop the hand-rolled versions from resume/suspend code. Now that crtc callbacks do this, we don't need a special case for s/r anymore. v3: Remove unused variables. v4: Don't remove drm_crtc_vblank_off from suspend paths, non-atomic nouveau still needs that. But still switch to drm_crtc_vblank_off since drm_vblank_off will disappear. Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
