- 12 Feb, 2016 10 commits
-
-
Boqun Feng authored
commit 49e9cf3f upstream. According to memory-barriers.txt: > Any atomic operation that modifies some state in memory and returns > information about the state (old or new) implies an SMP-conditional > general memory barrier (smp_mb()) on each side of the actual > operation ... Which mean these operations should be fully ordered. However on PPC, PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation, which is currently "lwsync" if SMP=y. The leading "lwsync" can not guarantee fully ordered atomics, according to Paul Mckenney: https://lkml.org/lkml/2015/10/14/970 To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee the fully-ordered semantics. This also makes futex atomics fully ordered, which can avoid possible memory ordering problems if userspace code relies on futex system call for fully ordered semantics. Fixes: b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Michael Neuling authored
commit d2b9d2a5 upstream. Currently we allow both the MSR T and S bits to be set by userspace on a signal return. Unfortunately this is a reserved configuration and will cause a TM Bad Thing exception if attempted (via rfid). This patch checks for this case in both the 32 and 64 bit signals code. If both T and S are set, we mark the context as invalid. Found using a syscall fuzzer. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Dan Streetman authored
[ Upstream commit a8a572a6 ] Remove the dst_entries_init/destroy calls for xfrm4 and xfrm6 dst_ops templates; their dst_entries counters will never be used. Move the xfrm dst_ops initialization from the common xfrm/xfrm_policy.c to xfrm4/xfrm4_policy.c and xfrm6/xfrm6_policy.c, and call dst_entries_init and dst_entries_destroy for each net namespace. The ipv4 and ipv6 xfrms each create dst_ops template, and perform dst_entries_init on the templates. The template values are copied to each net namespace's xfrm.xfrm*_dst_ops. The problem there is the dst_ops pcpuc_entries field is a percpu counter and cannot be used correctly by simply copying it to another object. The result of this is a very subtle bug; changes to the dst entries counter from one net namespace may sometimes get applied to a different net namespace dst entries counter. This is because of how the percpu counter works; it has a main count field as well as a pointer to the percpu variables. Each net namespace maintains its own main count variable, but all point to one set of percpu variables. When any net namespace happens to change one of the percpu variables to outside its small batch range, its count is moved to the net namespace's main count variable. So with multiple net namespaces operating concurrently, the dst_ops entries counter can stray from the actual value that it should be; if counts are consistently moved from one net namespace to another (which my testing showed is likely), then one net namespace winds up with a negative dst_ops count while another winds up with a continually increasing count, eventually reaching its gc_thresh limit, which causes all new traffic on the net namespace to fail with -ENOBUFS. Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 60a6531b ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 34ae6a1a ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7aaed57c ] Ivaylo Dimitrov reported a regression caused by commit 7866a621 ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by:
-
Neal Cardwell authored
[ Upstream commit 83d15e70 ] For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3e4006f0 ] When first SYNACK is sent, we already hold rcu_read_lock(), but this is not true if a SYNACK is retransmitted, as a timer (soft) interrupt does not hold rcu_read_lock() Fixes: 45f6fad8 ("ipv6: add complete rcu protection around np->opt") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 320f1a4a ] proc_dostring() needs an initialized destination string, while the one provided in proc_sctp_do_hmac_alg() contains stack garbage. Thus, writing to cookie_hmac_alg would strlen() that garbage and end up accessing invalid memory. Fixes: 3c68198e ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit ff621985 ] [I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
- 28 Jan, 2016 4 commits
-
-
Florian Westphal authored
[ Upstream commit 55285bf0 ] Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 068d8bd3 ] In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit e459dfee ] ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded, ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed, ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer. Fix this by inverting ip6addrlbl_hold() check. Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Cong Wang <cwang@twopensource.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Vijay Pandurangan authored
[ Upstream commit ce8c839b ] Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b796750> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by:
Evan Jones <ej@evanjones.ca> Signed-off-by:
Vijay Pandurangan <vijayp@vijayp.ca> Acked-by:
-
- 27 Jan, 2016 26 commits
-
-
Arnd Bergmann authored
commit 3e7a8716 upstream. Not all architectures are able to call __builtin_return_address(). On ARM, the mISDN code produces this warning: hardware/mISDN/w6692.c: In function 'w6692_dctrl': hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' pr_debug("%s: %s dev(%d) open from %p\n", card->name, __func__, ^ hardware/mISDN/mISDNipac.c: In function 'open_dchannel': hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' pr_debug("%s: %s dev(%d) open from %p\n", isac->name, __func__, ^ In a lot of cases, this is relatively easy to work around by passing the value of __builtin_return_address(0) from the callers into the functions that want it. One exception is the indirect 'open' function call in struct isac_hw. While it would be possible to fix this as well, this patch only addresses the other callers properly and lets this one return the direct parent function, which should be good enough. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paul Bolle authored
commit 298589b1 upstream. Building mem.o for 32 bits x86 triggers a GCC warning: drivers/infiniband/hw/cxgb4/mem.c: In function '_c4iw_write_mem_dma_aligned': drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Silence that warning by casting "&wr_wait" to unsigned long before casting it to __be64. That's what _c4iw_write_mem_inline() already does. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Kees Cook authored
commit 7d196ac3 upstream. When CONFIG_FRAME_WARN is set low (e.g. some ARM builds), the hard-coded stack buffer size used for kernel stack over run testing triggers build warnings. Instead, avoid the warning by recalcuating the buffer size and recursion count needed to trigger the test. Also uses the recursion counter indirectly to avoid changing the parameter during the test. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Fabio Estevam authored
commit 71473dbd upstream. With CONFIG_ACPI=n the following build warning is seen: drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] Move the definition of eg_pi inside the CONFIG_ACPI 'if' block. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 936b3264 upstream. With CONFIG_ACPI=n the following build warning is seen: drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] Protect eg_pi with CONFIG_ACPI. Based on patch from: Fabio Estevam <fabio.estevam@freescale.com> but doesn't mix allocation and code. Signed-off-by:
-
Uwe Kleine-König authored
commit e16343c4 upstream. The warning was introduced in 2009 (commit 4bf1fa5a ([ARM] 5613/1: implement CALLER_ADDRESSx)). The only "problem" here is that CALLER_ADDRESSx for x > 1 returns NULL which doesn't do much harm. The drawback of implementing a fix (i.e. use unwind tables to implement CALLER_ADDRESSx) is that much of the unwinder code would need to be marked as not traceable. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Behan Webster authored
commit aeea3592 upstream. With compilers which follow the C99 standard (like modern versions of gcc and clang), "extern inline" does the wrong thing (emits code for an externally linkable version of the inline function). In this case using static inline and removing the NULL version of return_address in return_address.c does the right thing. Signed-off-by:
Behan Webster <behanw@converseincode.com> Reviewed-by:
Mark Charlebois <charlebm@gmail.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Oliver Neukum authored
commit 1eaf35e4 upstream. The module should fail to load. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Oliver Freyermuth authored
commit f7d7f59a upstream. Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by:
Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit abdc9a3b upstream. The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3 ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Chunfeng Yun authored
commit 096b110a upstream. if a full speed hub connects to a high speed hub which supports MTT, the MTT field of its slot context will be set to 1 when xHCI driver setups an xHCI virtual device in xhci_setup_addressable_virt_dev(); once usb core fetch its hub descriptor, and need to update the xHC's internal data structures for the device, the HUB field of its slot context will be set to 1 too, meanwhile MTT is also set before, this will cause configure endpoint command fail, so in the case, we should clear MTT to 0 for full speed hub according to section 6.2.2 Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Vinod Koul authored
commit a1068045 upstream. The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Tested-by:
Ashish Panwar <ashish.panwar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Nikesh Oswal authored
commit e73694d8 upstream. For a sample rate of 12kHz the bclk was taken from the 44.1kHz table as we test for a multiple of 8kHz. This patch fixes this issue by testing for multiples of 4kHz instead. Signed-off-by:
Nikesh Oswal <Nikesh.Oswal@cirrus.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Sachin Pandhare authored
commit e9f96bc5 upstream. From datasheet: R17408 (4400h) HPF_C_1 R17409 (4401h) HPF_C_0 17048 -> 17408 (0x4400) 17049 -> 17409 (0x4401) Signed-off-by:
Sachin Pandhare <sachinpandhare@gmail.com> Acked-by:
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 2ba1fe7a upstream. hrtimer_cancel() waits for the completion from the callback, thus it must not be called inside the callback itself. This was already a problem in the past with ALSA hrtimer driver, and the early commit [fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it. However, the previous fix is still insufficient: it may still cause a lockup when the ALSA timer instance reprograms itself in its callback. Then it invokes the start function even in snd_timer_interrupt() that is called in hrtimer callback itself, results in a CPU stall. This is no hypothetical problem but actually triggered by syzkaller fuzzer. This patch tries to fix the issue again. Now we call hrtimer_try_to_cancel() at both start and stop functions so that it won't fall into a deadlock, yet giving some chance to cancel the queue if the functions have been called outside the callback. The proper hrtimer_cancel() is called in anyway at closing, so this should be enough. Reported-and-tested-by:
-
Nicolas Boichat authored
commit 43c54b8c upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_pcm_hw_params32 to a struct snd_pcm_hw_params, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. This actually leads to an out-of-bounds memory access later on in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan). Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
Nicolas Boichat authored
commit 9586495d upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_seq_port_info32 to a struct snd_seq_port_info, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
-
Takashi Iwai authored
commit ee8413b0 upstream. ALSA timer instance object has a couple of linked lists and they are unlinked unconditionally at snd_timer_stop(). Meanwhile snd_timer_interrupt() unlinks it, but it calls list_del() which leaves the element list itself unchanged. This ends up with unlinking twice, and it was caught by syzkaller fuzzer. The fix is to use list_del_init() variant properly there, too. Reported-by:
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
-
Takashi Iwai authored
commit b5a663aa upstream. A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
Takashi Iwai authored
commit 030e2c78 upstream. snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear() unconditionally even if there is no FIFO assigned, and this leads to an Oops due to NULL dereference. The fix is just to add a proper NULL check. Reported-by:
-
Mario Kleiner authored
commit 9f660a1c upstream. Without this patch, internal speaker and line-out work, but front headphone output jack stays silent on the Mac Pro 4,1. This code path also gets executed on the MacPro 5,1 due to identical codec SSID, but i don't know if it has any positive or adverse effects there or not. (v2) Implement feedback from Takashi Iwai: Reuse alc889_fixup_mbp_vref and just add a new nid 0x19 for the MacPro 4,1. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
-
Xiong Zhang authored
commit 3e6db33a upstream. It takes three minutes to enter into hibernation on some OEM SKL machines and we see many codec spurious response after thaw() opertion. This is because HDA is still in D0 state after freeze() call and pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver. It seems bios still access HDA when system enter into freeze state, HDA will receive codec response interrupt immediately after thaw() call. Because of this unexpected interrupt, HDA enter into a abnormal state and slow down the system enter into hibernation. In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and put HDA into D0 state in azx_thaw_noirq(). V2: Only apply this fix to SKL+ Fix compile error when CONFIG_PM_SLEEP isn't defined [Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment by tiwai] Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
-
David Henningsson authored
commit 02f6ff90 upstream. On the internal mic of the Packard Bell DOTS, one channel has an inverted signal. Add a quirk to fix this up. BugLink: https://bugs.launchpad.net/bugs/1523232Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
