- 20 Oct, 2007 40 commits
-
-
Milton Miller authored
Commit 9a39e273 removed the boot directory addition to CFLAGS that was being used by the subdirectory builds. For the other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly sets that to empty as it is explicitly for a single directory only. Append to KBUILD_CFLAGS instead. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
-
Randy Dunlap authored
Put kernel version info on title bar in xconfig (qconf) instead of defaulting to "qconf". Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
-
David Brownell authored
This removes a syntax error (seen building on Ubuntu Feisty). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
-
Linus Torvalds authored
This reverts commit a5bf3d89. David Brownell notes that this causes a regression visible in the drivers/usb/gadget Kconfig file: "That Kconfig hasn't changed (other than adding new drivers), and it's worked that way for several years now ... so the issue seems to be changes in menuconfig/kconfig/etc semantics. The issue is that when USB_GADGET=m, it's no longer possible to configure peripheral controller drivers as modules ... the controller drivers can now only be configured for static linkage. It should be making a choice of one of the controller drivers which could work on the target system, and allow that driver to be linked either as a module (ok iff USB_GADGET=m) or statically." Reverting this commit resolves the problem, and also fixes a second problem that David noticed: various dependent options couldn't be enabled. Tested-and-reported-by: David Brownell <david-b@pacbell.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Jan Beulich <jbeulich@novell.com>, Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) Fix build break in tsi108.c qeth: remove header_ops bug ir-functions.c:(.text+0xbce18): undefined reference to `input_event' NAPI: kconfig prompt and deleted doc file phy/bitbang: missing MODULE_LICENSE DM9000 initialization fix [PATCH] rt2x00: Add new rt73usb USB ID [PATCH] rt2x00: Fix residual check in PLCP calculations. [PATCH] iwlwifi: Fix rate setting in probe request for HW sacn [PATCH] b43: Make b43_stop() static [PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variable [PATCH] iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs [PATCH] zd1211rw, fix oops when ejecting install media [PATCH] b43legacy: Fix potential return of uninitialized variable [PATCH] iwl4965-base.c: fix off-by-one errors [PATCH] p54: Make filter configuration atomic [PATCH] rtl8187: remove NICMAC setting in configure_filters callback [PATCH] janitorial: fix all double includes in drivers/net/wireless [PATCH] rtl8187: Fix more frag bit checking, rts duration calc [PATCH] ipw2100: send WEXT scan events ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_sis: use correct S/G table size pata_cs5536: MWDMA fix sata_sis: fix SCR read breakage libata: fix kernel-doc param name
-
Jeff Garzik authored
Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
-
Olof Johansson authored
Fix build break: drivers/net/tsi108_eth.c: In function 'tsi108_init_one': drivers/net/tsi108_eth.c:1633: error: expected ')' before 'dev' drivers/net/tsi108_eth.c:1633: warning: too few arguments for format make[2]: *** [drivers/net/tsi108_eth.o] Error 1 Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Ursula Braun authored
Remove qeth bug caused by commit: [NET]: Move hardware header operations out of netdevice. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Randy Dunlap authored
[bugme-daemon@bugzilla.kernel.org wrote:] From: Randy Dunlap <randy.dunlap@oracle.com> Drivers that use lro functions should depend on INET, otherwise they may not link correctly. Let's not select INET. Select should be used only for library-like code, not to enable subsystems. ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined! ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Randy Dunlap authored
- make the kconfig NAPI option prompt consistent across all net drivers (other than EXPERIMENTAL; can it now be removed also, or is the new napi_struct implementation now EXPERIMENTAL ?) - remove comment about the now-deleted NAPI_HOWTO.txt file - clean up typos in Tulip NAPI & Interrupt Mitigation Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Randy Dunlap authored
Missing MODULE_LICENSE(), loading this module taints the kernel. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Mike Rapoport authored
DM9000 driver returns success even if it is failed to detect the chip. Below patch fixes it. Signed-off-by: Mike Rapoport <mike@compulab.co.il> drivers/net/dm9000.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
Erez Zadok reports that certain configurations fail to build due to schedule() TASK_[UN]INTERRUPTIBLE not being declared. Add proper include files to fix. Cc: Erez Zadok <ezk@cs.sunysb.edu> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
sata_sis has the same restrictions as other SFF controllers, and so must use LIBATA_MAX_PRD to denote that SCSI may only fill ATA_MAX_PRD/2 entries, due to our need to handle IOMMU merging. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Bartlomiej Zolnierkiewicz authored
* Fix out-of-bound array access for MWDMA modes. * Bump driver version. Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
SCR read for controllers which uses PCI configuration space for SCR access got broken while adding @val argument to SCR accessors. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Randy Dunlap authored
Fix libata kernel-doc parameter name. Warning(linux-2.6.23-git13//drivers/ata/libata-core.c:1415): No description found for parameter 'sgl' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (50 commits) ide: remove inclusion of non-existent io_trace.h ide-disk: add get_smart_data() helper ide: fix ->data_phase in taskfile_load_raw() ide: check drive->using_dma in flagged_taskfile() ide: check ->dma_setup() return value in flagged_taskfile() dtc2278: note on docs qd65xx: remove pointless qd_{read,write}_reg() (take 2) ide: PCI BMDMA initialization fixes (take 2) ide: remove stale comments from ide-taskfile.c ide: remove dead code from ide_driveid_update() ide: use __ide_end_request() in ide_end_dequeued_request() ide: enhance ide_setup_pci_noise() cs5530: remove needless ide_lock taking ide: take ide_lock for prefetch disable/enable in do_special() ht6560b: fix deadlock on error handling cmd640: fix deadlock on error handling slc90e66: fix deadlock on error handling opti621: fix deadlock on error handling qd65xx: fix deadlock on error handling dtc2278: fix deadlock on error handling ...
-
Olof Johansson authored
Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (29 commits) dm crypt: tidy pending dm mpath: send uevents dm: uevent generate events dm: add uevent to core dm: export name and uuid dm raid1: add mirror_set to struct mirror dm log: split suspend dm mpath: hp retry if not ready dm mpath: add hp handler dm mpath: add retry pg init dm crypt: tidy labels dm crypt: tidy whitespace dm crypt: add post processing queue dm crypt: use per device singlethread workqueues dm mpath: emc fix an error message dm: bio_list macro renaming dm io:ctl remove vmalloc void cast dm: tidy bio_io_error usage kcopyd use mutex instead of semaphore dm: use kzalloc ...
-
Jason Uhlenkott authored
Fix an argument name in do_sys_open()'s prototype. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
Chris Malley authored
Spelling error in sysfs_create_file kerneldoc. Signed-off-by: Chris Malley <mail@chrismalley.co.uk> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
James Bowes authored
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
Rolf Eike Beer authored
Typo: depricated -> deprecated Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
Dave Jones authored
Whilst looking up what profile=sleep did, I noticed that we missed adding docs for the most recent addition to the profiler. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
Masatake YAMATO authored
Signed-off-by: Masatake YAMATO <jet@gyve.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
Eric W. Biederman authored
Weird I thought I had written the makefile so this would be handled. Oh well this should fix it. Sorry about that. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Leonardo Chiquitto authored
This patch updates the "cat /proc/stat" output found in Documentation/filesystems/proc.txt. Signed-off-by: Adrian Bunk <bunk@kernel.org>
-
Milan Broz authored
Add crypt prefix to dec_pending to avoid confusing it in backtraces with the dm core function of the same name. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Anderson authored
This patch adds calls to dm_path_event for a failed path and a reinstated path. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Anderson authored
This patch adds support for the dm_path_event dm_send_event functions which create and send udev events. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Anderson authored
This patch adds a uevent skeleton to device-mapper. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Anderson authored
This patch adds a function to obtain a copy of a mapped device's name and uuid. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Jonathan Brassow authored
Store a pointer to the owning mirror_set structure within each mirror structure for a subsequent patch to use. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Jonathan Brassow authored
There are now two phases to a suspend in device-mapper - presuspend and postsuspend. This patch removes the single 'suspend' in the logging API and replaces it with 'presuspend' and 'postsuspend' functions to align it better with core device-mapper. A subsequent patch will make use of 'presuspend'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Dave Wysochanski authored
This patch adds retries to the hp hardware handler, and utilizes the MP_RETRY flag of dm-multipath. For now in the hp handler, if we get a pg_init completed with a check condition we just assume we can retry the pg_init command. We make this assumption because of incomplete data on specific check condition code of the HP hardware, and because testing has shown the HP path initialization command to be idempotent. The number of times we retry is settable via the "pg_init_retries" multipath map feature. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Dave Wysochanski authored
This patch adds the most basic dm-multipath hardware support for the HP active/passive arrays. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Dave Wysochanski authored
This patch allows a failed path group initialisation command to be retried. It adds a generic MP_RETRY flag and a "pg_init_retries" feature to device-mapper multipath which limits the number of retries. 1. A hw handler sends a path initialization command to the storage and the command completes with an error code indicating the command should be retried. 2. The hardware handler calls dm_pg_init_complete() with MP_RETRY set in err_flags to ask the dm multipath core to retry. 3. If the retry limit has not been exceeded, pg_init() is retried. Otherwise fail_path() is called. If you are using the userspace multipath-tools or device-mapper-multipath package, you can set pg_init_retries in the 'device' section of your /etc/multipath.conf file. For example: features "2 pg_init_retries 7" The number of PG retries attempted is reported in the 'dmsetup status' output. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-