Skip to content

L
linux
Switch branch/tag
  1. 10 Nov, 2021 2 commits
    • Taehee Yoo's avatar
      amt: use cancel_delayed_work() instead of flush_delayed_work() in amt_fini() · 43aa4937
      Taehee Yoo authored 
      When the amt module is being removed, it calls flush_delayed_work() to exit
source_gc_wq. But it wouldn't be exited properly because the
amt_source_gc_work(), which is the callback function of source_gc_wq
internally calls mod_delayed_work() again.
So, amt_source_gc_work() would be called after the amt module is removed.
Therefore kernel panic would occur.
In order to avoid it, cancel_delayed_work() should be used instead of
flush_delayed_work().

Test commands:
   modprobe amt
   modprobe -rv amt

Splat looks like:
 BUG: unable to handle page fault for address: fffffbfff80f50db
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 1237ee067 P4D 1237ee067 PUD 1237b2067 PMD 100c11067 PTE 0
 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0+ #27
 5a0ebebc29fe5c40c68bea90197606c3a832b09f
 RIP: 0010:run_timer_softirq+0x221/0xfc0
 Code: 00 00 4c 89 e1 4c 8b 30 48 c1 e9 03 80 3c 29 00 0f 85 ed 0b 00 00
 4d 89 34 24 4d 85 f6 74 19 49 8d 7e 08 48 89 f9 48 c1 e9 03 <80> 3c 29 00
 0f 85 fa 0b 00 00 4d 89 66 08 83 04 24 01 49 89 d4 48
 RSP: 0018:ffff888119009e50 EFLAGS: 00010806
 RAX: ffff8881191f8a80 RBX: 00000000007ffe2a RCX: 1ffffffff80f50db
 RDX: ffff888119009ed0 RSI: 0000000000000008 RDI: ffffffffc07a86d8
 RBP: dffffc0000000000 R08: ffff8881191f8280 R09: ffffed102323f061
 R10: ffff8881191f8307 R11: ffffed102323f060 R12: ffff888119009ec8
 R13: 00000000000000c0 R14: ffffffffc07a86d0 R15: ffff8881191f82e8
 FS:  0000000000000000(0000) GS:ffff888119000000(0000)
 knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: fffffbfff80f50db CR3: 00000001062dc002 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  ? add_timer+0x650/0x650
  ? kvm_clock_read+0x14/0x30
  ? ktime_get+0xb9/0x180
  ? rcu_read_lock_held_common+0xe/0xa0
  ? rcu_read_lock_sched_held+0x56/0xc0
  ? rcu_read_lock_bh_held+0xa0/0xa0
  ? hrtimer_interrupt+0x271/0x790
  __do_softirq+0x1d0/0x88f
  irq_exit_rcu+0xe7/0x120
  sysvec_apic_timer_interrupt+0x8a/0xb0
  </IRQ>
  <TASK>
[ ... ]

Fixes: bc54e49c ("amt: add multicast(IGMP) report message handler")
Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20211108145340.17208-1-ap420073@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      43aa4937
    • Marek Behún's avatar
      net: dsa: mv88e6xxx: Don't support >1G speeds on 6191X on ports other than 10 · dc2fc9f0
      Marek Behún authored 
      Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are
only 1G.

Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: default avatarMarek Behún <kabel@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      dc2fc9f0
  3. 09 Nov, 2021 8 commits
    • Jakub Kicinski's avatar
      Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · fceb0795
      Jakub Kicinski authored 
      Alexei Starovoitov says:

====================
pull-request: bpf 2021-11-09

We've added 7 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 174 insertions(+), 48 deletions(-).

The main changes are:

1) Various sockmap fixes, from John and Jussi.

2) Fix out-of-bound issue with bpf_pseudo_func, from Martin.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg
  bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding
  bpf, sockmap: Fix race in ingress receive verdict with redirect to self
  bpf, sockmap: Remove unhash handler for BPF sockmap usage
  bpf, sockmap: Use stricter sk state checks in sk_lookup_assign
  bpf: selftest: Trigger a DCE on the whole subprog
  bpf: Stop caching subprog index in the bpf_pseudo_func insn
====================

Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      fceb0795
    • Arnd Bergmann's avatar
      amt: add IPV6 Kconfig dependency · 9758aba8
      Arnd Bergmann authored 
      This driver cannot be built-in if IPV6 is a loadable module:

x86_64-linux-ld: drivers/net/amt.o: in function `amt_build_mld_gq':
amt.c:(.text+0x2e7d): undefined reference to `ipv6_dev_get_saddr'

Add the idiomatic Kconfig dependency that all such modules
have.

Fixes: b9022b53 ("amt: add control plane of amt interface")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9758aba8
    • Dan Carpenter's avatar
      gve: Fix off by one in gve_tx_timeout() · 1c360cc1
      Dan Carpenter authored 
      The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug.  The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().

Fixes: 87a7f321 ("gve: Recover from queue stall due to missed IRQ")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1c360cc1
    • Lin Ma's avatar
      hamradio: defer 6pack kfree after unregister_netdev · 0b911192
      Lin Ma authored 
      There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  6pack_close
         sp_xmit             |   kfree
          sp_encaps          |
                             |

According to the patch "defer ax25 kfree after unregister_netdev", this
patch reorder the kfree after the unregister_netdev to avoid the possible
UAF as the unregister_netdev() is well synchronized and won't return if
there is a running routine.
Signed-off-by: default avatarLin Ma <linma@zju.edu.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0b911192
    • Lin Ma's avatar
      hamradio: defer ax25 kfree after unregister_netdev · 3e0588c2
      Lin Ma authored 
      There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
ax25_sendmsg                 |
 ax25_queue_xmit             |
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  mkiss_close
         ax_xmit             |   kfree
          ax_encaps          |
                             |

Even though there are two synchronization primitives before the kfree:
1. wait_for_completion(&ax->dead). This can prevent the race with
routines from mkiss_ioctl. However, it cannot stop the routine coming
from upper layer, i.e., the ax25_sendmsg.

2. netif_stop_queue(ax->dev). It seems that this line of code aims to
halt the transmit queue but it fails to stop the routine that already
being xmit.

This patch reorder the kfree after the unregister_netdev to avoid the
possible UAF as the unregister_netdev() is well synchronized and won't
return if there is a running routine.
Signed-off-by: default avatarLin Ma <linma@zju.edu.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e0588c2
    • Jean Sacren's avatar
      net: sungem_phy: fix code indentation · 54f0bad6
      Jean Sacren authored 
      Remove extra space in front of the return statement.

Fixes: eb5b5b2f ("sungem_phy: support bcm5461 phy, autoneg.")
Signed-off-by: default avatarJean Sacren <sakiwit@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      54f0bad6
    • Jussi Maki's avatar
      bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg · b2c46181
      Jussi Maki authored 
      The current conversion of skb->data_end reads like this:

  ; data_end = (void*)(long)skb->data_end;
   559: (79) r1 = *(u64 *)(r2 +200)   ; r1  = skb->data
   560: (61) r11 = *(u32 *)(r2 +112)  ; r11 = skb->len
   561: (0f) r1 += r11
   562: (61) r11 = *(u32 *)(r2 +116)
   563: (1f) r1 -= r11

But similar to the case in 84f44df6 ("bpf: sock_ops sk access may stomp
registers when dst_reg = src_reg"), the code will read an incorrect skb->len
when src == dst. In this case we end up generating this xlated code:

  ; data_end = (void*)(long)skb->data_end;
   559: (79) r1 = *(u64 *)(r1 +200)   ; r1  = skb->data
   560: (61) r11 = *(u32 *)(r1 +112)  ; r11 = (skb->data)->len
   561: (0f) r1 += r11
   562: (61) r11 = *(u32 *)(r1 +116)
   563: (1f) r1 -= r11

... where line 560 is the reading 4B of (skb->data + 112) instead of the
intended skb->len Here the skb pointer in r1 gets set to skb->data and the
later deref for skb->len ends up following skb->data instead of skb.

This fixes the issue similarly to the patch mentioned above by creating an
additional temporary variable and using to store the register when dst_reg =
src_reg. We name the variable bpf_temp_reg and place it in the cb context for
sk_skb. Then we restore from the temp to ensure nothing is lost.

Fixes: 16137b09 ("bpf: Compute data_end dynamically with JIT code")
Signed-off-by: default avatarJussi Maki <joamaki@gmail.com>
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-6-john.fastabend@gmail.com
      b2c46181
    • John Fastabend's avatar
      bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding · e0dc3b93
      John Fastabend authored 
      Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.

But, more importantly strparser is using the following to access its metadata.

  (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data))

Where _strp_msg is defined as:

  struct _strp_msg {
        struct strp_msg            strp;                 /*     0     8 */
        int                        accum_len;            /*     8     4 */

        /* size: 12, cachelines: 1, members: 2 */
        /* last cacheline: 12 bytes */
  };

So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.

In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Tested-by: default avatarJussi Maki <joamaki@gmail.com>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com
      e0dc3b93
  5. 08 Nov, 2021 3 commits
    • John Fastabend's avatar
      bpf, sockmap: Fix race in ingress receive verdict with redirect to self · c5d2177a
      John Fastabend authored 
      A socket in a sockmap may have different combinations of programs attached
depending on configuration. There can be no programs in which case the socket
acts as a sink only. There can be a TX program in this case a BPF program is
attached to sending side, but no RX program is attached. There can be an RX
program only where sends have no BPF program attached, but receives are hooked
with BPF. And finally, both TX and RX programs may be attached. Giving us the
permutations:

 None, Tx, Rx, and TxRx

To date most of our use cases have been TX case being used as a fast datapath
to directly copy between local application and a userspace proxy. Or Rx cases
and TxRX applications that are operating an in kernel based proxy. The traffic
in the first case where we hook applications into a userspace application looks
like this:

  AppA  redirect   AppB
   Tx <-----------> Rx
   |                |
   +                +
   TCP <--> lo <--> TCP

In this case all traffic from AppA (after 3whs) is copied into the AppB
ingress queue and no traffic is ever on the TCP recieive_queue.

In the second case the application never receives, except in some rare error
cases, traffic on the actual user space socket. Instead the send happens in
the kernel.

           AppProxy       socket pool
       sk0 ------------->{sk1,sk2, skn}
        ^                      |
        |                      |
        |                      v
       ingress              lb egress
       TCP                  TCP

Here because traffic is never read off the socket with userspace recv() APIs
there is only ever one reader on the sk receive_queue. Namely the BPF programs.

However, we've started to introduce a third configuration where the BPF program
on receive should process the data, but then the normal case is to push the
data into the receive queue of AppB.

       AppB
       recv()                (userspace)
     -----------------------
       tcp_bpf_recvmsg()     (kernel)
         |             |
         |             |
         |             |
       ingress_msgQ    |
         |             |
       RX_BPF          |
         |             |
         v             v
       sk->receive_queue

This is different from the App{A,B} redirect because traffic is first received
on the sk->receive_queue.

Now for the issue. The tcp_bpf_recvmsg() handler first checks the ingress_msg
queue for any data handled by the BPF rx program and returned with PASS code
so that it was enqueued on the ingress msg queue. Then if no data exists on
that queue it checks the socket receive queue. Unfortunately, this is the same
receive_queue the BPF program is reading data off of. So we get a race. Its
possible for the recvmsg() hook to pull data off the receive_queue before the
BPF hook has a chance to read it. It typically happens when an application is
banging on recv() and getting EAGAINs. Until they manage to race with the RX
BPF program.

To fix this we note that before this patch at attach time when the socket is
loaded into the map we check if it needs a TX program or just the base set of
proto bpf hooks. Then it uses the above general RX hook regardless of if we
have a BPF program attached at rx or not. This patch now extends this check to
handle all cases enumerated above, TX, RX, TXRX, and none. And to fix above
race when an RX program is attached we use a new hook that is nearly identical
to the old one except now we do not let the recv() call skip the RX BPF program.
Now only the BPF program pulls data from sk->receive_queue and recv() only
pulls data from the ingress msgQ post BPF program handling.

With this resolved our AppB from above has been up and running for many hours
without detecting any errors. We do this by correlating counters in RX BPF
events and the AppB to ensure data is never skipping the BPF program. Selftests,
was not able to detect this because we only run them for a short period of time
on well ordered send/recvs so we don't get any of the noise we see in real
application environments.

Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Tested-by: default avatarJussi Maki <joamaki@gmail.com>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-4-john.fastabend@gmail.com
      c5d2177a
    • John Fastabend's avatar
      bpf, sockmap: Remove unhash handler for BPF sockmap usage · b8b8315e
      John Fastabend authored 
      We do not need to handle unhash from BPF side we can simply wait for the
close to happen. The original concern was a socket could transition from
ESTABLISHED state to a new state while the BPF hook was still attached.
But, we convinced ourself this is no longer possible and we also improved
BPF sockmap to handle listen sockets so this is no longer a problem.

More importantly though there are cases where unhash is called when data is
in the receive queue. The BPF unhash logic will flush this data which is
wrong. To be correct it should keep the data in the receive queue and allow
a receiving application to continue reading the data. This may happen when
tcp_abort() is received for example. Instead of complicating the logic in
unhash simply moving all this to tcp_close() hook solves this.

Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Tested-by: default avatarJussi Maki <joamaki@gmail.com>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-3-john.fastabend@gmail.com
      b8b8315e
    • John Fastabend's avatar
      bpf, sockmap: Use stricter sk state checks in sk_lookup_assign · 40a34121
      John Fastabend authored 
      In order to fix an issue with sockets in TCP sockmap redirect cases we plan
to allow CLOSE state sockets to exist in the sockmap. However, the check in
bpf_sk_lookup_assign() currently only invalidates sockets in the
TCP_ESTABLISHED case relying on the checks on sockmap insert to ensure we
never SOCK_CLOSE state sockets in the map.

To prepare for this change we flip the logic in bpf_sk_lookup_assign() to
explicitly test for the accepted cases. Namely, a tcp socket in TCP_LISTEN
or a udp socket in TCP_CLOSE state. This also makes the code more resilent
to future changes.
Suggested-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-2-john.fastabend@gmail.com
      40a34121
  7. 07 Nov, 2021 9 commits
  9. 06 Nov, 2021 12 commits
  11. 05 Nov, 2021 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7