LRC workarounds are already implemented: remove leftover TODO.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The function pointer is already present as match_func, inside
struct xe_rtp_rule and handled as so instead of inside rtp_regval as
originally thought out when this was written.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

xe_tuning.c should include xe_tuning.h, not xe_wa.h
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Add missing "multicast" word and adapt/wrap the rest of the sentence.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Adding a debugfs dump of GGTT was useful for some debugging I did,
and easy to add. Might be useful for others too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Now that we issue TLB invalidations on unbinds and rebind from execs we
no longer need to issue TLB invalidations from the ring operations.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

If we add an TLB invalidation fence for rebinds issued from execs we
should be able to drop the TLB invalidation from the ring operations.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

Rather than alias supports_usm to ASIS support, add an explicit
variable to indicate ASID support.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

This means we are in the middle of a GT reset and no need to do TLB
invalidation so just signal invalidation fence immediately.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

If a VM unbind hits an error, do not issue a TLB invalidation and
propagate the error the invalidation fence.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

Make lockdep happy as we required to hold the GGTT when calling
xe_ggtt_map_bo.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

Only the GuC should be issuing TLB invalidations if it is enabled. Part
of this patch is sanitize the device on driver unload to ensure we do
not send GuC based TLB invalidations during driver unload.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

If an bind operation fails we need to report it via the async fence.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

If the platform supports range based TLB invalidations use them. Hide
these details in the xe_gt_tlb_invalidation layer.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

This will help implementing range based TLB invalidations.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

Not used, let's remove this.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

This will help with TLB invalidation as the ASID in TLB invalidate
should be zero for platforms that do not support a ASID.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

Endless fences are not good, add a TDR to cleanup any invalidation
fences which have not received an invalidation message within a timeout
period.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

This will help debug issues with TLB invalidation fences.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Document all exported functions.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This gets tricky as we can't do the TLB invalidation until the unbind
operation is done on the hardware and we can't signal the unbind as
complete until the TLB invalidation is done. To work around this we
create an unbind fence which does a TLB invalidation after unbind is
done on the hardware, signals on TLB invalidation completion, and this
fence is installed in the BO dma-resv slot and installed in out-syncs
for the unbind operation.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Suggested-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Fence will be signaled when TLB invalidation completion.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

TLB invalidations no longer just restricted to USM, move the variables
to own sub-structure.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

TLB invalidation is used by more than USM (page faults) so break this
code out into its own file.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

We can't currently do this due to TLB invalidation done handler
expecting the seqno being received in-order, with the fast-path a TLB
invalidation done could pass one being processed in the slow-path in an
extreme corner case. Remove TLB invalidation done from the fast-path for
now and in a follow up reenable this once the TLB invalidation done
handler can deal with out of order seqno.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

emit_pte assumes the size argument is 4k aligned, this may not be true
for the PTEs emitted for CSS as seen by below call stack:

[   56.734228] xe_migrate_copy:585: size=327680, ccs_start=327680, css_size=1280,4096
[   56.734250] xe_migrate_copy:643: size=262144
[   56.734252] emit_pte:404: ptes=64
[   56.734255] emit_pte:418: chunk=64
[   56.734257] xe_migrate_copy:650: size=1024	@ CCS emit PTE
[   56.734259] emit_pte:404: ptes=1
[   56.734261] emit_pte:418: chunk=1
[   56.734339] xe_migrate_copy:643: size=65536
[   56.734342] emit_pte:404: ptes=16
[   56.734344] emit_pte:418: chunk=16
[   56.734346] xe_migrate_copy:650: size=256	# CCS emit PTE
[   56.734348] emit_pte:404: ptes=1
[   56.734350] emit_pte:418: chunk=1
[   56.734352] xe_res_next:174: size=4096, remaining=0

Update emit_pte to handle sizes less than 4k.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Scratch page is in VRAM, and therefore requires 64K GTT layout. In GGTT
world this just means having 16 consecutive entries, with 64K GTT
alignment for the GTT address of the first entry (also matching physical
alignment). However to keep things simple just dump it into system
memory, like we already do for ppGTT.  While we are here, also give it
known default value.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Spec says we need to use 64K VRAM pages for GGTT on platforms like DG2.
In GGTT this just means aligning the GTT address to 64K and ensuring
that we have 16 consecutive entries each pointing to the respective 4K
entry. We already ensure we have 64K pages underneath, so it's just a
case of forcing the GTT alignment.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

On DG2 when running the xe_vm IGT, the kernel generates loads of CAT
errors and GT resets (sometimes at least).  On small-bar systems seems
to trigger a lot more easily (maybe due to difference in allocation
strategy). Appears to be related to scratch, since we seem to use the
64K TLB hint on scratch entries, even though the scratch page is a 4K
vram page. Bumping the scratch page size and physical alignment seems
to fix it. Or at least we no longer hit:

[  148.872683] xe 0000:03:00.0: [drm] Engine memory cat error: guc_id=0
[  148.872701] xe 0000:03:00.0: [drm] Engine memory cat error: guc_id=0
[  148.875108] WARNING: CPU: 0 PID: 953 at drivers/gpu/drm/xe/xe_guc_submit.c:797

However to keep things simple, so we don't have to deal with 64K TLB
hints, just move the scratch page into system memory on platforms that
require 64K VRAM pages.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

We need to ensure we don't leak the contents to userspace.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

On DGFX this blows up if can call this with a system memory object:

XE_BUG_ON(!mem_type_is_vram(place->mem_type) && place->mem_type != XE_PL_STOLEN);

If we consider dpt it looks like we can already in theory hit this, if
we run out of vram and stolen vram. It at least seems reasonable to
allow calling this on any object which supports CPU access.

Note this also changes the behaviour with stolen VRAM and suspend, such
that we no longer attempt to migrate stolen objects into system memory.
However nothing in stolen should ever need to be restored (same on
integrated), so should be fine. Also on small-bar systems the stolen
portion is pretty much always non-CPU accessible, and currently pinned
objects use plain memcpy when being moved, which doesn't play nicely.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

I saw a flicker when booting xe, and it's very likely that the original
FB was not mapped at the same place when inheriting, fix it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The comparison with < 0 suggests that the memory device access
should be signed to handle underflow. This makes it work more reliably.

As a result, the max refcount is now S32_MAX instead.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This is intended to get some properties that are of interest of UMDs
like the ban state.

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Engine property get uAPI will be added, so to avoid ambiguity here
renaming XE_ENGINE_PROPERTY_X to XE_ENGINE_SET_PROPERTY_X.

No changes in behavior.

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This aligns with other drivers and fixes build failure when
CONFIG_PM_SLEEP is not set, such as on RISC-V.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Some tests are meant to run only on real hardware. Skip those,
if no device was found.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

When adding the frequency management, Meteor Lake platform
was left behind. Handling it properly now.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

[  117.901473] xe 0000:00:02.0: [drm] GuC load failed: status = 0x400000A0
[  117.901506] xe 0000:00:02.0: [drm] GuC load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
Signed-off-by: Philippe Lecluse <philippe.lecluse@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

At present the interrupts are enabled while initializing the last GT.
But this is incorrect for a Multi-GT platform, as root GT initialization
will fail with interrupt disabled. Interrupts are required for
the GuC submission triggered during initialization.
Enable the interrupt during the root GT initialization.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>