Pull input fixes from Dmitry Torokhov.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB
  Input: elan_i2c - add ELAN0608 to the ACPI table
  Input: trackpoint - assume 3 buttons when buttons detection fails

Pull parisc fixes from Helge Deller:

 - Fix PCI memory bar assignments with 64-bit kernels on machines with
   Dino/Cujo PCI chipsets. This makes PCI graphic cards work on such
   machines (from Thomas Bogendoerfer).

 - Fix documentation to be more clear about the difference between %pF
   and %pS printk format usage. There are still many places in the
   kernel which have it wrong (from Petr Mladek, Sergey Senozhatsky &
   me).

* 'parisc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  printk-formats.txt: Better describe the difference between %pS and %pF
  parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo

Pull quota fix from Jan Kara:
 "A fix of a check for quota limit"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: correct space limit check

Christian Brauner reported that if you use the TIOCGPTPEER ioctl() to
get a slave pty file descriptor, the resulting file descriptor doesn't
look right in /proc/<pid>/fd/<fd>.  In particular, he wanted to use
readlink() on /proc/self/fd/<fd> to get the pathname of the slave pty
(basically implementing "ptsname{_r}()").

The reason for that was that we had generated the wrong 'struct path'
when we create the pty in ptmx_open().

In particular, the dentry was correct, but the vfsmount pointed to the
mount of the ptmx node. That _can_ be correct - in case you use
"/dev/pts/ptmx" to open the master - but usually is not.  The normal
case is to use /dev/ptmx, which then looks up the pts/ directory, and
then the vfsmount of the ptmx node is obviously the /dev directory, not
the /dev/pts/ directory.

We actually did have the right vfsmount available, but in the wrong
place (it gets looked up in 'devpts_acquire()' when we get a reference
to the pts filesystem), and so ptmx_open() used the wrong mnt pointer.

The end result of this confusion was that the pty worked fine, but when
if you did TIOCGPTPEER to get the slave side of the pty, end end result
would also work, but have that dodgy 'struct path'.

And then when doing "d_path()" on to get the pathname, the vfsmount
would not match the root of the pts directory, and d_path() would return
an empty pathname thinking that the entry had escaped a bind mount into
another mount.

This fixes the problem by making devpts_acquire() return the vfsmount
for the pts filesystem, allowing ptmx_open() to trivially just use the
right mount for the pts dentry, and create the proper 'struct path'.
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "A couple of minor fixes (st, ses) and some bigger driver fixes for
  qla2xxx (crash triggered by fw dump) and ipr (lockdep problems with
  mq)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ses: Fix wrong page error
  scsi: ipr: Fix scsi-mq lockdep issue
  scsi: st: fix blk_get_queue usage
  scsi: qla2xxx: Fix system crash while triggering FW dump

Pull audit fixes from Paul Moore:
 "Two small fixes to the audit code, both explained well in the
  respective patch descriptions, but the quick summary is one
  use-after-free fix, and one silly fanotify notification flag fix"

* tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: Receive unmount event
  audit: Fix use after free in audit_remove_watch_rule()

Sometimes people seems unclear when to use the %pS or %pF printk format.
For example, see commit 51d96dc2 ("random: fix warning message on ia64
and parisc") which fixed such a wrong format string.

The documentation should be more clear about the difference.
Signed-off-by: Helge Deller <deller@gmx.de>
[pmladek@suse.com: Restructure the entire section]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

For 64bit kernels the lmmio_space_offset of the host bridge window
isn't set correctly on systems with dino/cujo PCI host bridges.
This leads to not assigned memory bars and failing drivers, which
need to use these bars.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull networking fixes from David Miller:

 1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel
    Grumbach.

 2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From
    Vivien Didelot.

 3) Fix two regressions with bonding on wireless, from Andreas Born.

 4) Fix build when busypoll is disabled, from Daniel Borkmann.

 5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet.

 6) Set SKB cached route properly in inet_rtm_getroute(), from Florian
    Westphal.

 7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding
    Tianhong.

 8) Fix module refcnt leak in ULP code, from Sabrina Dubroca.

 9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric
    Dumazet.

10) Need to purge socket write queue in dccp_destroy_sock(), also from
    Eric Dumazet.

11) Make bpf_trace_printk() work properly on 32-bit architectures, from
    Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  bpf: fix bpf_trace_printk on 32 bit archs
  PCI: fix oops when try to find Root Port for a PCI device
  sfc: don't try and read ef10 data on non-ef10 NIC
  net_sched: remove warning from qdisc_hash_add
  net_sched/sfq: update hierarchical backlog when drop packet
  net_sched: reset pointers to tcf blocks in classful qdiscs' destructors
  ipv4: fix NULL dereference in free_fib_info_rcu()
  net: Fix a typo in comment about sock flags.
  ipv6: fix NULL dereference in ip6_route_dev_notify()
  tcp: fix possible deadlock in TCP stack vs BPF filter
  dccp: purge write queue in dccp_destroy_sock()
  udp: fix linear skb reception with PEEK_OFF
  ipv6: release rt6->rt6i_idev properly during ifdown
  af_key: do not use GFP_KERNEL in atomic contexts
  tcp: ulp: avoid module refcnt leak in tcp_set_ulp
  net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
  net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
  PCI: Disable Relaxed Ordering Attributes for AMD A1100
  PCI: Disable Relaxed Ordering for some Intel processors
  PCI: Disable PCIe Relaxed Ordering if unsupported
  ...

James reported that on MIPS32 bpf_trace_printk() is currently
broken while MIPS64 works fine:

  bpf_trace_printk() uses conditional operators to attempt to
  pass different types to __trace_printk() depending on the
  format operators. This doesn't work as intended on 32-bit
  architectures where u32 and long are passed differently to
  u64, since the result of C conditional operators follows the
  "usual arithmetic conversions" rules, such that the values
  passed to __trace_printk() will always be u64 [causing issues
  later in the va_list handling for vscnprintf()].

  For example the samples/bpf/tracex5 test printed lines like
  below on MIPS32, where the fd and buf have come from the u64
  fd argument, and the size from the buf argument:

    [...] 1180.941542: 0x00000001: write(fd=1, buf=  (null), size=6258688)

  Instead of this:

    [...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512)

One way to get it working is to expand various combinations
of argument types into 8 different combinations for 32 bit
and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64
as well that it resolves the issue.

Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric report a oops when booting the system after applying
the commit a99b646a ("PCI: Disable PCIe Relaxed..."):

[    4.241029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[    4.247001] IP: pci_find_pcie_root_port+0x62/0x80
[    4.253011] PGD 0
[    4.253011] P4D 0
[    4.253011]
[    4.258013] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[    4.262015] Modules linked in:
[    4.265005] CPU: 31 PID: 1 Comm: swapper/0 Not tainted 4.13.0-dbx-DEV #316
[    4.271002] Hardware name: Intel RML,PCH/Iota_QC_19, BIOS 2.40.0 06/22/2016
[    4.279002] task: ffffa2ee38cfa040 task.stack: ffffa51ec0004000
[    4.285001] RIP: 0010:pci_find_pcie_root_port+0x62/0x80
[    4.290012] RSP: 0000:ffffa51ec0007ab8 EFLAGS: 00010246
[    4.295003] RAX: 0000000000000000 RBX: ffffa2ee36bae000 RCX: 0000000000000006
[    4.303002] RDX: 000000000000081c RSI: ffffa2ee38cfa8c8 RDI: ffffa2ee36bae000
[    4.310013] RBP: ffffa51ec0007b58 R08: 0000000000000001 R09: 0000000000000000
[    4.317001] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa51ec0007ad0
[    4.324005] R13: ffffa2ee36bae098 R14: 0000000000000002 R15: ffffa2ee37204818
[    4.331002] FS:  0000000000000000(0000) GS:ffffa2ee3fcc0000(0000) knlGS:0000000000000000
[    4.339002] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.345001] CR2: 0000000000000050 CR3: 000000401000f000 CR4: 00000000001406e0
[    4.351002] Call Trace:
[    4.354012]  ? pci_configure_device+0x19f/0x570
[    4.359002]  ? pci_conf1_read+0xb8/0xf0
[    4.363002]  ? raw_pci_read+0x23/0x40
[    4.366011]  ? pci_read+0x2c/0x30
[    4.370014]  ? pci_read_config_word+0x67/0x70
[    4.374012]  pci_device_add+0x28/0x230
[    4.378012]  ? pci_vpd_f0_read+0x50/0x80
[    4.382014]  pci_scan_single_device+0x96/0xc0
[    4.386012]  pci_scan_slot+0x79/0xf0
[    4.389001]  pci_scan_child_bus+0x31/0x180
[    4.394014]  acpi_pci_root_create+0x1c6/0x240
[    4.398013]  pci_acpi_scan_root+0x15f/0x1b0
[    4.402012]  acpi_pci_root_add+0x2e6/0x400
[    4.406012]  ? acpi_evaluate_integer+0x37/0x60
[    4.411002]  acpi_bus_attach+0xdf/0x200
[    4.415002]  acpi_bus_attach+0x6a/0x200
[    4.418014]  acpi_bus_attach+0x6a/0x200
[    4.422013]  acpi_bus_scan+0x38/0x70
[    4.426011]  acpi_scan_init+0x10c/0x271
[    4.429001]  acpi_init+0x2fa/0x348
[    4.433004]  ? acpi_sleep_proc_init+0x2d/0x2d
[    4.437001]  do_one_initcall+0x43/0x169
[    4.441001]  kernel_init_freeable+0x1d0/0x258
[    4.445003]  ? rest_init+0xe0/0xe0
[    4.449001]  kernel_init+0xe/0x150

====================== cut here =============================

It looks like the pci_find_pcie_root_port() was trying to
find the Root Port for the PCI device which is the Root
Port already, it will return NULL and trigger the problem,
so check the highest_pcie_bridge to fix thie problem.

Fixes: a99b646a ("PCI: Disable PCIe Relaxed Ordering if unsupported")
Fixes: c56d4450 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MAC stats command takes a port ID, which doesn't exist on
pre-ef10 NICs (5000- and 6000- series). This is extracted from the
NIC specific data; we misinterpret this as the ef10 data structure,
causing us to read potentially unallocated data. With a KASAN kernel
this can cause errors with:
   BUG: KASAN: slab-out-of-bounds in efx_mcdi_mac_stats

Fixes: 0a2ab4d9 ("sfc: set the port-id when calling MC_CMD_MAC_STATS")
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was added in commit e57a784d ("pkt_sched: set root qdisc
before change() in attach_default_qdiscs()") to hide duplicates
from "tc qdisc show" for incative deivices.

After 59cc1f61 ("net: sched: convert qdisc linked list to hashtable")
it triggered when classful qdisc is added to inactive device because
default qdiscs are added before switching root qdisc.

Anyway after commit ea327469 ("net: sched: avoid duplicates in
qdisc dump") duplicates are filtered right in dumper.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sfq_enqueue() drops head packet or packet from another queue it
have to update backlog at upper qdiscs too.

Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Traffic filters could keep direct pointers to classes in classful qdisc,
thus qdisc destruction first removes all filters before freeing classes.
Class destruction methods also tries to free attached filters but now
this isn't safe because tcf_block_put() unlike to tcf_destroy_chain()
cannot be called second time.

This patch set class->block to NULL after first tcf_block_put() and
turn second call into no-op.

Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If fi->fib_metrics could not be allocated in fib_create_info()
we attempt to dereference a NULL pointer in free_fib_info_rcu() :

    m = fi->fib_metrics;
    if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt))
            kfree(m);

Before my recent patch, we used to call kfree(NULL) and nothing wrong
happened.

Instead of using RCU to defer freeing while we are under memory stress,
it seems better to take immediate action.

This was reported by syzkaller team.

Fixes: 3fb07daf ("ipv4: add reference counting to metrics")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on a syzkaller report [1], I found that a per cpu allocation
failure in snmp6_alloc_dev() would then lead to NULL dereference in
ip6_route_dev_notify().

It seems this is a very old bug, thus no Fixes tag in this submission.

Let's add in6_dev_put_clear() helper, as we will probably use
it elsewhere (once available/present in net-next)

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff88019f456680 task.stack: ffff8801c6e58000
RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178
RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202
RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000
RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001
RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37
R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8
FS:  00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
 in6_dev_put include/net/addrconf.h:335 [inline]
 ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732
 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678
 call_netdevice_notifiers net/core/dev.c:1694 [inline]
 rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107
 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149
 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587
 register_netdev+0x1a/0x30 net/core/dev.c:7669
 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214
 ops_init+0x10a/0x570 net/core/net_namespace.c:118
 setup_net+0x313/0x710 net/core/net_namespace.c:294
 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418
 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206
 SYSC_unshare kernel/fork.c:2347 [inline]
 SyS_unshare+0x653/0xfa0 kernel/fork.c:2297
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512c9
RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d
R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd
Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3
f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6
0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP:
ffff8801c6e5f1b0
RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP:
ffff8801c6e5f1b0
RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP:
ffff8801c6e5f1b0
---[ end trace e441d046c6410d31 ]---
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Although audit_watch_handle_event() can handle FS_UNMOUNT event, it is
not part of AUDIT_FS_WATCH mask and thus such event never gets to
audit_watch_handle_event(). Thus fsnotify marks are deleted by fsnotify
subsystem on unmount without audit being notified about that which leads
to a strange state of existing audit rules with dead fsnotify marks.

Add FS_UNMOUNT to the mask of events to be received so that audit can
clean up its state accordingly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>

audit_remove_watch_rule() drops watch's reference to parent but then
continues to work with it. That is not safe as parent can get freed once
we drop our reference. The following is a trivial reproducer:

mount -o loop image /mnt
touch /mnt/file
auditctl -w /mnt/file -p wax
umount /mnt
auditctl -D
<crash in fsnotify_destroy_mark()>

Grab our own reference in audit_remove_watch_rule() earlier to make sure
mark does not get freed under us.

CC: stable@vger.kernel.org
Reported-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Merge tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update consists of important compile and run-time error fixes to
  timers/freq-step, kmod, and sysctl tests"

* tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: timers: freq-step: fix compile error
  selftests: futex: fix run_tests target
  test_sysctl: fix sysctl.sh by making it executable
  test_kmod: fix kmod.sh by making it executable

Merge tag 'wireless-drivers-for-davem-2017-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.13

This time quite a few fixes for iwlwifi and one major regression fix
for brcmfmac. For the iwlwifi aggregation bug a small change was
needed for mac80211, but as Johannes is still away the mac80211 patch
is taken via wireless-drivers tree.

brcmfmac

* fix firmware crash (a recent regression in bcm4343{0,1,8}

iwlwifi

* Some simple PCI HW ID fix-ups and additions for family 9000

* Remove a bogus warning message with new FWs (bug #196915)

* Don't allow illegal channel options to be used (bug #195299)

* A fix for checksum offload in family 9000

* A fix serious throughput degradation in 11ac with multiple streams

* An old bug in SMPS where the firmware was not aware of SMPS changes

* Fix a memory leak in the SAR code

* Fix a stuck queue case in AP mode;

* Convert a WARN to a simple debug in a legitimate race case (from
  which we can recover)

* Fix a severe throughput aggregation on 9000-family devices due to
  aggregation issues, needed a small change in mac80211
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Filtering the ACK packet was not put at the right place.

At this place, we already allocated a child and put it
into accept queue.

We absolutely need to call tcp_child_process() to release
its spinlock, or we will deadlock at accept() or close() time.

Found by syzkaller team (Thanks a lot !)

Fixes: 8fac365f ("tcp: Add a tcp_filter hook before handle ack packet")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller reported that DCCP could have a non empty
write queue at dismantle time.

WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 panic+0x1e4/0x417 kernel/panic.c:180
 __warn+0x1c4/0x1d9 kernel/panic.c:541
 report_bug+0x211/0x2d0 lib/bug.c:183
 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
 do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
RSP: 0018:ffff8801d182f108 EFLAGS: 00010297
RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280
RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0
R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8
 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835
 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 sock_release+0x8d/0x1e0 net/socket.c:597
 sock_close+0x16/0x20 net/socket.c:1126
 __fput+0x327/0x7e0 fs/file_table.c:210
 ____fput+0x15/0x20 fs/file_table.c:246
 task_work_run+0x18a/0x260 kernel/task_work.c:116
 exit_task_work include/linux/task_work.h:21 [inline]
 do_exit+0xa32/0x1b10 kernel/exit.c:865
 do_group_exit+0x149/0x400 kernel/exit.c:969
 get_signal+0x7e8/0x17e0 kernel/signal.c:2330
 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808
 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157
 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
 syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

copy_linear_skb() is broken; both of its callers actually
expect 'len' to be the amount we are trying to copy,
not the offset of the end.
Fix it keeping the meanings of arguments in sync with what the
callers (both of them) expect.
Also restore a saner behavior on EFAULT (i.e. preserving
the iov_iter position in case of failure):

The commit fd851ba9 ("udp: harden copy_linear_skb()")
avoids the more destructive effect of the buggy
copy_linear_skb(), e.g. no more invalid memory access, but
said function still behaves incorrectly: when peeking with
offset it can fail with EINVAL instead of copying the
appropriate amount of memory.
Reported-by: Sasha Levin <alexander.levin@verizon.com>
Fixes: b65ac446 ("udp: try to avoid 2 cache miss on dequeue")
Fixes: fd851ba9 ("udp: harden copy_linear_skb()")
Signed-off-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Sasha Levin <alexander.levin@verizon.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a dst is created by addrconf_dst_alloc() for a host route or an
anycast route, dst->dev points to loopback dev while rt6->rt6i_idev
points to a real device.
When the real device goes down, the current cleanup code only checks for
dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the
refcount leak on the real device in the above situation.
This patch makes sure to always release the refcount taken on
rt6->rt6i_idev during dst_dev_put().

Fixes: 587fea74 ("ipv6: mark DST_NOGC and remove the operation of
dst_free()")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pfkey_broadcast() might be called from non process contexts,
we can not use GFP_KERNEL in these cases [1].

This patch partially reverts commit ba51b6be ("net: Fix RCU splat in
af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock()
section.

[1] : syzkaller reported :

in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439
3 locks held by syzkaller183439/2932:
 #0:  (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649
 #1:  (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293
 #2:  (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline]
 #2:  (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028
CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994
 __might_sleep+0x95/0x190 kernel/sched/core.c:5947
 slab_pre_alloc_hook mm/slab.h:416 [inline]
 slab_alloc mm/slab.c:3383 [inline]
 kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559
 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037
 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207
 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281
 dump_sp+0x3d6/0x500 net/key/af_key.c:2685
 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042
 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695
 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299
 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722
 pfkey_process+0x606/0x710 net/key/af_key.c:2814
 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650
sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 ___sys_sendmsg+0x755/0x890 net/socket.c:2035
 __sys_sendmsg+0xe5/0x210 net/socket.c:2069
 SYSC_sendmsg net/socket.c:2080 [inline]
 SyS_sendmsg+0x2d/0x50 net/socket.c:2076
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x445d79
RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79
RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008
RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700
R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000
R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000

Fixes: ba51b6be ("net: Fix RCU splat in af_key")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on
the module. Then, if ->init fails, tcp_set_ulp propagates the error but
nothing releases that reference.

Fixes: 734942cc ("tcp: ULP infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ding Tianhong says:

====================
Add new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

Some devices have problems with Transaction Layer Packets with the Relaxed
Ordering Attribute set.  This patch set adds a new PCIe Device Flag,
PCI_DEV_FLAGS_NO_RELAXED_ORDERING, a set of PCI Quirks to catch some known
devices with Relaxed Ordering issues, and a use of this new flag by the
cxgb4 driver to avoid using Relaxed Ordering with problematic Root Complex
Ports.

It's been years since I've submitted kernel.org patches, I appolgise for the
almost certain submission errors.

v2: Alexander point out that the v1 was only a part of the whole solution,
    some platform which has some issues could use the new flag to indicate
    that it is not safe to enable relaxed ordering attribute, then we need
    to clear the relaxed ordering enable bits in the PCI configuration when
    initializing the device. So add a new second patch to modify the PCI
    initialization code to clear the relaxed ordering enable bit in the
    event that the root complex doesn't want relaxed ordering enabled.

    The third patch was base on the v1's second patch and only be changed
    to query the relaxed ordering enable bit in the PCI configuration space
    to allow the Chelsio NIC to send TLPs with the relaxed ordering attributes
    set.

    This version didn't plan to drop the defines for Intel Drivers to use the
    new checking way to enable relaxed ordering because it is not the hardest
    part of the moment, we could fix it in next patchset when this patches
    reach the goal.

v3: Redesigned the logic for pci_configure_relaxed_ordering when configuration,
    If a PCIe device didn't enable the relaxed ordering attribute default,
    we should not do anything in the PCIe configuration, otherwise we
    should check if any of the devices above us do not support relaxed
    ordering by the PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag, then base on
    the result if we get a return that indicate that the relaxed ordering
    is not supported we should update our device to disable relaxed ordering
    in configuration space. If the device above us doesn't exist or isn't
    the PCIe device, we shouldn't do anything and skip updating relaxed ordering
    because we are probably running in a guest.

v4: Rename the functions pcie_get_relaxed_ordering and pcie_disable_relaxed_ordering
    according John's suggestion, and modify the description, use the true/false
    as the return value.

    We shouldn't enable relaxed ordering attribute by the setting in the root
    complex configuration space for PCIe device, so fix it for cxgb4.

    Fix some format issues.

v5: Removed the unnecessary code for some function which only return the bool
    value, and add the check for VF device.

    Make this patch set base on 4.12-rc5.

v6: Fix the logic error in the need to enable the relaxed ordering attribute for cxgb4.

v7: The cxgb4 drivers will enable the PCIe Capability Device Control[Relaxed
    Ordering Enable] in PCI Probe() routine, this will break our current
    solution for some platform which has problematic when enable the relaxed
    ordering attribute. According to the latest recommendations, remove the
    enable_pcie_relaxed_ordering(), although it could not cover the Peer-to-Peer
    scene, but we agree to leave this problem until we really trigger it.

    Make this patch set base on 4.12 release version.

v8: Change the second patch title and description to make it more reasonable,
    add the acked-by from Alex and Ashok.

    Add a new patch to enable the Relaxed Ordering Attribute for cxgb4vf driver.

    Make this patch set base on 4.13-rc2.

v9: The document (https://software.intel.com/sites/default/files/managed/9e/
    bc/64-ia-32-architectures-optimization-manual.pdf) indicate that the Xeon
    processors based on Broadwell/Haswell microarchitecture has the problem
    with Relaxed Ordering Attribute enabled, so add the whole list Device ID
    from Intel to the patch.

v10: Significant rework based on Bjorn's feedback, reorganize the first 2 patches,
     now the Intel and AMD erratum soc has been divided to the different patches,
     rename the pcie_relaxed_ordering_supported() to pcie_relaxed_ordering_enabled(),
     and no need to check every intervening switch except the root ports, update
     some commits.

v11: We shouldn't let the Intel engineer to acked the AMD's erratum patch, fix the
     funny mistake.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4vf Ethernet driver now queries PCIe configuration space to
determine if it can send TLPs to it with the Relaxed Ordering
Attribute set, just like the pf did.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4 Ethernet driver now queries PCIe configuration space to determine
if it can send TLPs to it with the Relaxed Ordering Attribute set.

Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability
Device Control[Relaxed Ordering Enable] at probe routine, to make sure
the driver will not send the Relaxed Ordering TLPs to the Root Complex which
could not deal the Relaxed Ordering TLPs.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe
Root Port where Upstream Transaction Layer Packets with the Relaxed
Ordering Attribute clear are allowed to bypass earlier TLPs with
Relaxed Ordering set, it would cause Data Corruption, so we need
to disable Relaxed Ordering Attribute when Upstream TLPs to the
Root Port.
Reported-and-suggested-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the Intel spec section 3.9.1 said:

    3.9.1 Optimizing PCIe Performance for Accesses Toward Coherent Memory
          and Toward MMIO Regions (P2P)

    In order to maximize performance for PCIe devices in the processors
    listed in Table 3-6 below, the soft- ware should determine whether the
    accesses are toward coherent memory (system memory) or toward MMIO
    regions (P2P access to other devices). If the access is toward MMIO
    region, then software can command HW to set the RO bit in the TLP
    header, as this would allow hardware to achieve maximum throughput for
    these types of accesses. For accesses toward coherent memory, software
    can command HW to clear the RO bit in the TLP header (no RO), as this
    would allow hardware to achieve maximum throughput for these types of
    accesses.

    Table 3-6. Intel Processor CPU RP Device IDs for Processors Optimizing
               PCIe Performance

    Processor                            CPU RP Device IDs

    Intel Xeon processors based on       6F01H-6F0EH
    Broadwell microarchitecture

    Intel Xeon processors based on       2F01H-2F0EH
    Haswell microarchitecture

It means some Intel processors has performance issue when use the Relaxed
Ordering Attribute, so disable Relaxed Ordering for these root port.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When bit4 is set in the PCIe Device Control register, it indicates
whether the device is permitted to use relaxed ordering.
On some platforms using relaxed ordering can have performance issues or
due to erratum can cause data-corruption. In such cases devices must avoid
using relaxed ordering.

The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that
Relaxed Ordering (RO) attribute should not be used for Transaction Layer
Packets (TLP) targeted towards these affected root complexes.

This patch checks if there is any node in the hierarchy that indicates that
using relaxed ordering is not safe. In such cases the patch turns off the
relaxed ordering by clearing the capability for this device.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add 2 new IDs (ELAN0609 and ELAN060B) to the list of ACPI IDs that should
be handled by the driver.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Similar to commit 722c5ac7 ("Input: elan_i2c - add ELAN0605 to the
ACPI table"), ELAN0608 should be handled by elan_i2c.

This touchpad can be found in Lenovo ideapad 320-14IKB.

BugLink: https://bugs.launchpad.net/bugs/1708852Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull MD fixes from Shaohua Li:
 "Fix several bugs:

   - fix a rcu stall issue introduced in 4.12 (Neil Brown)

   - fix two raid5 cache race conditions (Song Liu)"

* tag 'md/4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  MD: not clear ->safemode for external metadata array
  md/r5cache: fix io_unit handling in r5l_log_endio()
  md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_set
  md: fix test in md_write_start()
  md: always clear ->safemode when md_check_recovery gets the mddev lock.

Pull crypto fixes from Herbert Xu:
 "Fix an error path bug in ixp4xx as well as a read overrun in
 sha1-avx2"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sha1 - Fix reads beyond the number of blocks passed
  crypto: ixp4xx - Fix error handling path in 'aead_perform()'

In the function msg_reverse(), we reverse the header while trying to
reuse the original buffer whenever possible. Those rejected/returned
messages are always transmitted as unicast, but the msg_non_seq field
is not explicitly set to zero as it should be.

We have seen cases where multicast senders set the message type to
"NOT dest_droppable", meaning that a multicast message shorter than
one MTU will be returned, e.g., during receive buffer overflow, by
reusing the original buffer. This has the effect that even the
'msg_non_seq' field is inadvertently inherited by the rejected message,
although it is now sent as a unicast message. This again leads the
receiving unicast link endpoint to steer the packet toward the broadcast
link receive function, where it is dropped. The affected unicast link is
thereafter (after 100 failed retransmissions) declared 'stale' and
reset.

We fix this by unconditionally setting the 'msg_non_seq' flag to zero
for all rejected/returned messages.
Reported-by: Canh Duc Luu <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On L2 bearers, the TIPC broadcast function is sending out packets using
the corresponding L2 broadcast address. At reception, we filter such
packets under the assumption that they will also be delivered as
broadcast packets.

This assumption doesn't always hold true. Under high load, we have seen
that a switch may convert the destination address and deliver the packet
as a PACKET_MULTICAST, something leading to inadvertently dropped
packets and a stale and reset broadcast link.

We fix this by extending the reception filtering to accept packets of
type PACKET_MULTICAST.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>