1. Remove redundant blanks
2. Straighten code lines that don't go over 80 characters
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iamthif_mtu doesn't have default value anymore it
is always supplied by the ME firmware
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a patch to the jr3_pci.c file that fixes up a
printk warning found by the checkpatch.pl tool.

Added KERN_facility levels for printks.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This was reported by "make versioncheck"
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

n is the number of bytes to read, not the number of samples. So if there is
enough data available we will write to the userspace buffer beyond its bounds.
Fix this by copying n bytes maximum. Also round n down to the next multiple of
the sample size, so we will only read complete samples. If the buffer is too
small to hold at least one sample return -EINVAL.

Also update the documentation of read_first_n to reflect the fact that 'n' is
supposed to be in bytes and not in samples.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add support for YWRAP scrolling by shuffling pages around in DMM
instead of sw blits.

Note that fbcon only utilizes this mode if the y resolution is
divided evenly by the font height.  So, for example, a 1920x1080
display using a 16 pixel tall font will not utilize this, but a
1280x1024 display would.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The PIO2 driver errors when GPIOLIB, on which it depends, is not enabled.

Add dependancy when selecting the PIO2.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

commit 51c9d654 ("Staging: delete tty drivers")
removed the files, delete the sections too.

CC: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

commit 78f23926 ("Staging: delete westbridge code")
deleted the files, delete the section.

CC: David Cross <odc@cypress.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

commit fc2d6e57
("staging: brcm80211: remove brcm80211 driver from the staging tree")
moved the files, update the F: pattern.

CC: John W. Linville <linville@tuxdriver.com>
CC: Arend van Spriel <arend@broadcom.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

commit bb2a97e9 ("Staging: delete generic_serial drivers")
removed the files, delete the section.

CC: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

All patches sent to the maintainer address bounce:

   Diagnostic-Code: smtp; 550 5.1.1 <apatard@mandriva.com>: Recipient address
       rejected: User unknown in virtual mailbox table

The address found in drivers/staging/xgifb/TODO seems to work better.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: arnaud.patard@rtp-net.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The PCM subsystem in the Line6 driver is mainly used for PCM playback and
capture by ALSA, but also has other tasks, most notably providing a
low-latency software monitor for devices which don't support hardware
monitoring (e.g., the TonePort series). This patch makes ALSA "play nicely"
with the other components, i.e., prevents it from resetting the isochronous
USB transfer while other PCM tasks (software monitoring) are running.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The .trigger() pcm callbacks are not allowed to block and cannot wait
until urbs have completed.  We need to ensure that stopping, preparing,
and then restarting a stream always works.

Currently the driver will sometimes return -EBUSY when restarting the
stream because urbs have not completed yet.  This can be triggered by
jackd from userspace.

The solution is to wait on urbs in the .prepare() pcm callback since
blocking is allowed in that callback.  This guarantees that all urbs are
quiesced and ready to be submitted when the start trigger callback is
invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The line6 driver checks struct field addresses for NULL where it does
not make sense to do so.  The struct has already been checked for NULL
and there is no value in checking the first field's address too.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Playback urbs use the index_out counter to decide which part of the
playback buffer to use.  Since the urb already has a unique index in
range [0, LINE6_ISO_BUFFERS) there is no need to keep a separate
counter.

Use the urb index instead.  This also eliminates the possibility of two
urbs using the same playback buffer space if they ever complete
out-of-order for some reason.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The playback urb transfer buffer calculation does not factor in
LINE6_ISO_PACKETS.  Buffer memory is organized like this in the driver:

  Buffer 0                 Buffer 1                 ...
  [Packet 0, Packet 1, ...][Packet 0, Packet 1, ...][Packet 0, ...]

However, we're lucky that LINE6_ISO_PACKETS is currently defined as 1 so
this patch does not change any behavior.  It's still worth including
this fix in case the LINE6_ISO_PACKETS value is changed in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The .hw_params() pcm callback can be invoked multiple times in a row.
Ensure that the URB data buffer is only allocated once.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This resolves the conflict in the
drivers/staging/iio/industrialio-core.c file due to two different
changes made to resolve the same problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The ring buffer is only used to pass meta data for outbound packets. The
actual payload is accessed by DMA from the host. So the stop/wake queue
mechanism based on counting and comparing number of pages sent v.s. number
of pages in the ring buffer is wrong. Also, there is a race condition in
the stop/wake queue calls, which can stop xmit queue forever.

The new stop/wake queue mechanism is based on the actual bytes used by
outbound packets in the ring buffer. The check for number of outstanding
sends after stop queue prevents the race condition that can cause wake
queue happening earlier than stop queue.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: Long Li <longli@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: check for NULL last_entry before calling cifs_save_resume_key
  cifs: attempt to freeze while looping on a receive attempt
  cifs: Fix sparse warning when calling cifs_strtoUCS
  CIFS: Add descriptions to the brlock cache functions

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Calling __pa() with an ioremap()ed address is invalid
  x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
  x86/intel_mid: Kconfig select fix
  x86/intel_mid: Fix the Kconfig for MID selection

* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6:
  spi/gpio: fix section mismatch warning
  spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build
  spi/nuc900: Include linux/module.h
  spi/ath79: fix compile error due to missing include

The ad5790 has a binary compatible interface to ad5791, so we just have to add
an entry to the drivers device table to add support for it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://neil.brown.name/md:
  md: raid5 crash during degradation
  md/raid5: never wait for bad-block acks on failed device.
  md: ensure new badblocks are handled promptly.
  md: bad blocks shouldn't cause a Blocked status on a Faulty device.
  md: take a reference to mddev during sysfs access.
  md: refine interpretation of "hold_active == UNTIL_IOCTL".
  md/lock: ensure updates to page_attrs are properly locked.

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: use new generic {enable,disable}_percpu_irq() routines
  drivers/net/ethernet/tile: use skb_frag_page() API
  asm-generic/unistd.h: support new process_vm_{readv,write} syscalls
  arch/tile: fix double-free bug in homecache_free_pages()
  arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  MAINTAINERS: Update amd-iommu F: patterns
  iommu/amd: Fix typo in kernel-parameters.txt
  iommu/msm: Fix compile error in mach-msm/devices-iommu.c
  Fix comparison using wrong pointer variable in dma debug code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Fix lost speaker volume controls
  ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins
  ALSA: hda/realtek - Don't create extra controls with channel suffix
  ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes
  ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs
  ASoC: Provide a more complete DMA driver stub
  ASoC: Remove references to corgi and spitz from machine driver document
  ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C
  ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
  ASoC: uda1380: Return proper error in uda1380_modinit failure path
  ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C
  ASoC: Mark WM8994 ADC muxes as virtual
  ALSA: hda/realtek - Fix Oops in alc_mux_select()
  ALSA: sis7019 - give slow codecs more time to reset

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Do no try to schedule task events if there are none
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  perf header: Use event_name() to get an event name
  perf stat: Failure with "Operation not supported"

In order to safely dereference current->real_parent inside an
rcu_read_lock, we need an rcu_dereference.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Modify initialization of PCIe capability registers in Tsi721 mport driver:
 - change Completion Timeout value to avoid unexpected data transfer
   aborts during intensive traffic.
 - replace hardcoded offset of PCIe capability block by making it use the
   common function.

This patch is applicable to kernel versions starting from 3.2-rc1.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>