There is no reason to keep the clksrc cleanups separate from the
other cleanups, and this resolves some merge conflicts.

Conflicts:
	arch/arm/mach-spear/spear13xx.c
	drivers/irqchip/Makefile

Some constant definitions are only defined for spear13xx, so
we must not attempt to build SPEAr SMP support when that
SoC is not enabled.

arch/arm/mach-spear/platsmp.c:25:35:
 error: 'VA_SCU_BASE' undeclared here (not in a function)
 arch/arm/mach-spear/platsmp.c: In function 'spear13xx_smp_prepare_cpus':
 arch/arm/mach-spear/platsmp.c:111:58: error: 'SYS_LOCATION' undeclared (first use in this function)

Cc: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

From Nicolas Ferre <nicolas.ferre@atmel.com>:

DT modifications for generic slave DMA binding.
Addition of MCI and I2C DMA bindings.
A little DT machine compatibility removal for SAMA5.

* tag 'at91-soc' of git://github.com/at91linux/linux-at91:
  ARM: at91/sama5d34ek.dts: remove not needed compatibility string
  ARM: at91: dts: add MCI DMA support
  ARM: at91: dts: add i2c dma support
  ARM: at91: dts: set #dma-cells to the correct value
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Hot-plugging with CONFIG_DEBUG_PREEMPT=y on a device with arm
architected timers causes a slew of "using smp_processor_id() in
preemptible" warnings:

  BUG: using smp_processor_id() in preemptible [00000000] code: sh/111
  caller is arch_timer_cpu_notify+0x14/0xc8

This happens because sometimes the cpu notifier,
arch_timer_cpu_notify(), is called in preemptible context and
other times in non-preemptible context but we use this_cpu_ptr()
to retrieve the clockevent in all cases. We're only going to
actually use the pointer in non-preemptible context though, so
push the this_cpu_ptr() access down into the cases to force the
checks to occur only in non-preemptible contexts.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <Marc.Zyngier@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 0583fe47 "ARM: convert arm/arm64 arch timer to use CLKSRC_OF init"
has left the omap5_realtime_timer_init() function with a stale variable and
broken whitespace. This fixes both.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I changed the prototype of the function earlier but only
in the section for CONFIG_DMA_ENGINE, not the alternative.
This makes the driver build again, e.g. for vexpress_defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a series originally prepared for inclusion in 3.9, which did
not work out because of dependencies on the dmaengine driver. All the
changes for the dmaengine code are merged in 3.9 now, so we can finally
do the switchover and remove the now unnecessary dma definitions for
spear13xx from the platform code.

The dma platform_data actually made up the majority of the spear13xx
platform code overall, so moving that into device tree files makes the
code substantially smaller.

* spear/dwdma:
  ata: arasan: remove the need for platform_data
  ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
  serial: pl011: use generic DMA slave configuration if possible
  spi: pl022: use generic DMA slave configuration if possible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a prerequisite for the spear/dwdma series.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This adds a complete DT binding for the arasan device driver. There is
currently only one user, which is the spear13xx platform, so we don't
actually have to parse all the properties until another user comes in,
but this does use the generic DMA binding to find the DMA channel.

The patch is untested so far and is part of a series to convert
the spear platform over to use the generic DMA binding, so it
should stay with the rest of the series.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.linux@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: devicetree-discuss@lists.ozlabs.org

From Nicolas Ferre:
Little modification in SoC presentation in kernel log.
Removing of a long-standing warning in sam9263 PM code.

* tag 'at91-soc' of git://github.com/at91linux/linux-at91:
  ARM: at91: suspend both memory controllers on at91sam9263
  ARM: at91: change "Unknown" qualifier SoC subtype handling
Signed-off-by: Olof Johansson <olof@lixom.net>

* at91/soc:
  ARM: at91: add defconfig for SAMA5
  ARM: at91: dt: add device tree files for SAMA5D3 family
  ARM: at91: introduce SAMA5 support
  ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch
  ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation
  ARM: at91: change name template in AT91_SOC_START macro
  ARM: at91: renamme rm9200 dt file
  ARM: at91: rename board-dt to more specific name board-dt-sam9
  ARM: at91: move non DT Kconfig to Kconfig.non_dt

Merge tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup

From Tony Lindgren:
Display related clean-up from Tomi Valkeinen.

These were separated from the DSS driver changes to leave out
a dependency between the driver and arch/arm related code.

* tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm: dss-common: don't use reset_gpio from omap4_panda_dvi_device
  arm: omap boards: Remove unnecessary platform_enable/disable callbacks for VENC devices
  arm: omap: dss-common: use picodlp panel's gpio handling
  arm: omap: board-omap3pandora: use tpo panel's gpio handling
  arm: omap: board-zoom: use NEC panel's gpio handling
  arm: omap: board-rx-51: use acx565akm panel's gpio handling
  arm: omap: board-sdp3430: use sharp panel's gpio handling
  arm: omap: board-omap3evm: use sharp panel's gpio handling
  arm: omap: board-overo: use lb035q02 dpi panel's gpio handling
  arm: omap: board-ldp: use generic dpi panel's gpio handling
  arm: omap: board-am3517: use generic dpi panel's gpio handling
  arm: omap: board-cm-t35: use generic dpi panel's gpio handling
  arm: omap: board-devkit8000: use generic dpi panel's gpio handling
  arm: omap: board-2430: use generic dpi panel's gpio handling
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  OMAPDSS: add fields to panels' platform data
  OMAPDSS: panels: keep platform data of all panels in a single header

Conflicts:
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-zoom-display.c

* omap/boards:
  ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
  omap2+: Remove useless Makefile line
  omap2+: Remove useless Makefile line
  ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
  ARM: OMAP1: fix omap_udc registration

* omap/fixes-non-critical:
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
  ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
  ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
  ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
  ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry
  ARM: OMAP: fix typo "CONFIG_SMC91x_MODULE"
  ARM: OMAP5: clock: No Freqsel on OMAP5 devices too
  ARM: OMAP5: Make errata i688 workaround available
  ARM: OMAP5: Update SAR memory layout for WakeupGen
  ARM: OMAP5: Update SAR RAM base address
  ARM: OMAP5: Reuse prm read_inst/write_inst
  ARM: OMAP5: prm: Allow prm init to succeed
  ARM: OMAP5: timer: Update the clocksource name as per clock data
  ARM: OMAP5: Update SOC id detection code for ES2

"atmel,sama5ek" compatibility sting does not correspond to a
useful board configuration. This d34ek.dts is the only sama5d3
.dts file affected.
Reported-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add DMA resources to MCI nodes.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add DMA resources to i2c nodes.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: correct 9n12 dma phandle name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Moving to generic DMA DT binding involves to set #dma-cells to 2.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

For the past three years, we have had a #warning in
mach-at91 about the sdram_selfrefresh_enable or
at91sam9_standby functions possibly not working on
at91sam9263. In the meantime a function was added
to do the right thing on at91sam9g45, which looks like
it should also work on '9263.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: remove paragraph in commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>

From Jason Cooper:
mvebu driver irqchip for v3.10

 - move the armada irqchip driver to drivers/irqchip/

* tag 'irqchip-3.10' of git://git.infradead.org/users/jcooper/linux:
  irqchip: armada-370-xp: slightly cleanup irq controller driver
  irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
  irqchip: move IRQ driver for Armada 370/XP
  ARM: mvebu: move L2 cache initialization in init_early()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch '3.10-lo/board-cleanup' of git://gitorious.org/linux-omap-dss2/linux into omap-for-v3.10/dss

Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc

This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:

- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init

* tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux:
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ARM: vexpress: remove extra timer-sp control register clearing
  ARM: dts: vexpress: disable CA9 core tile sp804 timer
  ARM: vexpress: remove sp804 OF init
  ARM: highbank: use OF init for sp804 timer
  ARM: timer-sp: convert to use CLKSRC_OF init
  OF: add empty of_device_is_available for !OF
  ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  ARM: make machine_desc->init_time default to clocksource_of_init
  ARM: arch_timer: use full 64-bit counter for sched_clock
  ARM: make sched_clock just call a function pointer
  ARM: sched_clock: allow changing to higher frequency counter
Signed-off-by: Olof Johansson <olof@lixom.net>

This has a nasty set of conflicts with the exynos MCT code, which was
moved in a separate branch, and then fixed up when merged in, but still
conflicts a bit here. It should have been sorted out by this merge though.

In preparation for the introduction of MSI support in the IRQ
controller driver, we clarify the implementation of IPI using
additional defines for the manipulation of doorbells. Just like IPIs
are implemented using doorbells, MSIs will also use doorbells, so it
makes sense to do this preparatory cleanup first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

If we move the IRQ handler function above the initialization function,
we avoid a forward declaration. This wasn't done as part of the
previous commit, in order to increase the readibility of the previous
commit, who was also moving the IRQ controller driver from arch/arm to
drivers/irqchip.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

When the Marvell Armada 370/XP support was included in the kernel, the
drivers/irqchip/ directory didn't exist and the minimal infrastructure
in it also didn't exist. Now that we have those things in place, we
move the Armada 370/XP IRQ controller driver from
arch/arm/mach-mvebu/irq-armada-370-xp.c to
drivers/irqchip/irq-armada-370-xp.c.

Note in order to reduce code movement and therefore ease the review of
this patch, we intentionally introduce a forward declaration of
armada_370_xp_handle_irq(). It is in fact not needed because this
handler can now simply be implemented before
armada_370_xp_mpic_of_init(). That will be done in the next commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

In preparation for moving the IRQ controller driver to
drivers/irqchip/, we don't want the IRQ controller driver to be
responsible for initializing the L2 cache. Instead, let's initialize
the L2 cache at the init_early() level, like mach-exynos/common.c is
doing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The sp804 binding is already in use by several platforms. This adds missing
documentation for the binding and also extends the binding to handle some
additional possible interrupt configurations.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Move the integrator-cp timer init to timer-sp.c and use CLKSRC_OF. There is
no reason to use the aliases, so drop them from the init code.

The integrator-cp timers are mistakenly called sp804 timers in the dts, but
in fact they are not sp804 dual timers, but single timers with the same
programming model. Fix the dts to reflect this.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Enable DT based init for the sp804 timers on versatile DT platform.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Add the versatile platform dtbs to the dtbs make rule.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

The timer-sp initialization code clears the control register before
initializing the timers, so every platform doing this is redundant.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

The motherboard sp804 timer is used, but core tile sp804 timer is not.
According to Russell King, the clock configuration is undocumented and
defaults to 32kHz which is not desireable. So mark core tile sp804 timer
as disabled.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Remove the vexpress specific setup for the sp804 timer now that
clocksource_of_init will do it.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>

Remove the highbank specific setup for the sp804 timer now that
clocksource_of_init will do it.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

This adds CLKSRC_OF based init for sp804 timer. The clock initialization is
refactored to support retrieving the clock(s) from the DT.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Add an empty version of of_device_is_available.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

This converts arm and arm64 to use CLKSRC_OF DT based initialization for
the arch timer. A new function arch_timer_arch_init is added to allow for
arch specific setup.

This has a side effect of enabling sched_clock on omap5 and exynos5. There
should not be any reason not to use the arch timers for sched_clock.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Originally from a default machine descriptor patch from Arnd, pull out
just the default call to clocksource_of_init part. This is needed so that
platforms can simply remove .init_time calls as they are converted to use
clocksource_of_init.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Only 32-bits of the arch timer were being used and wrapping was needlessly
being done in s/w. By using the full counter (56-64 bits), we don't need
to deal with wrapping and can simplify the implementation when using
arch timer.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

This converts sched_clock to simply a call to a function pointer in order
to allow overriding it. This will allow for use with 64-bit counters where
overflow handling is not needed.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>