1. 01 Aug, 2016 6 commits
    • Robbie Ko's avatar
      Btrfs: send, fix warning due to late freeing of orphan_dir_info structures · 443f9d26
      Robbie Ko authored
      Under certain situations, when doing an incremental send, we can end up
      not freeing orphan_dir_info structures as soon as they are no longer
      needed. Instead we end up freeing them only after finishing the send
      stream, which causes a warning to be emitted:
      
      [282735.229200] ------------[ cut here ]------------
      [282735.229968] WARNING: CPU: 9 PID: 10588 at fs/btrfs/send.c:6298 btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
      [282735.231282] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
      [282735.237130] CPU: 9 PID: 10588 Comm: btrfs Tainted: G        W       4.6.0-rc7-btrfs-next-31+ #1
      [282735.239309] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
      [282735.240160]  0000000000000000 ffff880224273ca8 ffffffff8126b42c 0000000000000000
      [282735.240160]  0000000000000000 ffff880224273ce8 ffffffff81052b14 0000189a24273ac8
      [282735.240160]  ffff8802210c9800 0000000000000000 0000000000000001 0000000000000000
      [282735.240160] Call Trace:
      [282735.240160]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
      [282735.240160]  [<ffffffff81052b14>] __warn+0xc2/0xdd
      [282735.240160]  [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
      [282735.240160]  [<ffffffffa03c99d5>] btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
      [282735.240160]  [<ffffffffa0398358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
      [282735.240160]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
      [282735.240160]  [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
      [282735.240160]  [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
      [282735.240160]  [<ffffffff81196f0c>] ? __fget+0x6b/0x77
      [282735.240160]  [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
      [282735.240160]  [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
      [282735.240160]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
      [282735.240160]  [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14
      [282735.240160]  [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa
      [282735.256343] ---[ end trace a4539270c8056f93 ]---
      
      Consider the following example:
      
        Parent snapshot:
      
        .                                                             (ino 256)
        |--- a/                                                       (ino 257)
        |    |--- c/                                                  (ino 260)
        |
        |--- del/                                                     (ino 259)
              |--- tmp/                                               (ino 258)
              |--- x/                                                 (ino 261)
              |--- y/                                                 (ino 262)
      
        Send snapshot:
      
        .                                                             (ino 256)
        |--- a/                                                       (ino 257)
        |    |--- x/                                                  (ino 261)
        |    |--- y/                                                  (ino 262)
        |
        |--- c/                                                       (ino 260)
             |--- tmp/                                                (ino 258)
      
      1) When processing inode 258, we end up delaying its rename operation
         because it has an ancestor (in the send snapshot) that has a higher
         inode number (inode 260) which was also renamed in the send snapshot,
         therefore we delay the rename of inode 258 so that it happens after
         inode 260 is renamed;
      
      2) When processing inode 259, we end up delaying its deletion (rmdir
         operation) because it has a child inode (258) that has its rename
         operation delayed. At this point we allocate an orphan_dir_info
         structure and tag inode 258 so that we later attempt to see if we
         can delete (rmdir) inode 259 once inode 258 is renamed;
      
      3) When we process inode 260, after renaming it we finally do the rename
         operation for inode 258. Once we issue the rename operation for inode
         258 we notice that this inode was tagged so that we attempt to see
         if at this point we can delete (rmdir) inode 259. But at this point
         we can not still delete inode 259 because it has 2 children, inodes
         261 and 262, that were not yet processed and therefore not yet
         moved (renamed) away from inode 259. We end up not freeing the
         orphan_dir_info structure allocated in step 2;
      
      4) We process inodes 261 and 262, and once we move/rename inode 262
         we issue the rmdir operation for inode 260;
      
      5) We finish the send stream and notice that red black tree that
         contains orphan_dir_info structures is not empty, so we emit
         a warning and then free any orphan_dir_structures left.
      
      So fix this by freeing an orphan_dir_info structure once we try to
      apply a pending rename operation if we can not delete yet the tagged
      directory.
      
      A test case for fstests follows soon.
      Signed-off-by: default avatarRobbie Ko <robbieko@synology.com>
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      [Modified changelog to be more detailed and easier to understand]
      443f9d26
    • Robbie Ko's avatar
      Btrfs: incremental send, fix premature rmdir operations · 99ea42dd
      Robbie Ko authored
      Under certain situations, an incremental send operation can contain
      a rmdir operation that will make the receiving end fail when attempting
      to execute it, because the target directory is not yet empty.
      
      Consider the following example:
      
        Parent snapshot:
      
        .                                                             (ino 256)
        |--- a/                                                       (ino 257)
        |    |--- c/                                                  (ino 260)
        |
        |--- del/                                                     (ino 259)
              |--- tmp/                                               (ino 258)
              |--- x/                                                 (ino 261)
      
        Send snapshot:
      
        .                                                             (ino 256)
        |--- a/                                                       (ino 257)
        |    |--- x/                                                  (ino 261)
        |
        |--- c/                                                       (ino 260)
             |--- tmp/                                                (ino 258)
      
      1) When processing inode 258, we delay its rename operation because inode
         260 is its new parent in the send snapshot and it was not yet renamed
         (since 260 > 258, that is, beyond the current progress);
      
      2) When processing inode 259, we realize we can not yet send an rmdir
         operation (against inode 259) because inode 258 was still not yet
         renamed/moved away from inode 259. Therefore we update data structures
         so that after inode 258 is renamed, we try again to see if we can
         finally send an rmdir operation for inode 259;
      
      3) When we process inode 260, we send a rename operation for it followed
         by a rename operation for inode 258. Once we send the rename operation
         for inode 258 we then check if we can finally issue an rmdir for its
         previous parent, inode 259, by calling the can_rmdir() function with
         a value of sctx->cur_ino + 1 (260 + 1 = 261) for its "progress"
         argument. This makes can_rmdir() return true (value 1) because even
         though there's still a child inode of inode 259 that was not yet
         renamed/moved, which is inode 261, the given value of progress (261)
         is not lower then 261 (that is, not lower than the inode number of
         some child of inode 259). So we end up sending a rmdir operation for
         inode 259 before its child inode 261 is processed and renamed.
      
      So fix this by passing the correct progress value to the call to
      can_rmdir() from within apply_dir_move() (where we issue delayed rename
      operations), which should match stcx->cur_ino (the number of the inode
      currently being processed) and not sctx->cur_ino + 1.
      
      A test case for fstests follows soon.
      Signed-off-by: default avatarRobbie Ko <robbieko@synology.com>
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      [Rewrote change log to be more detailed, clear and well formatted]
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      99ea42dd
    • Filipe Manana's avatar
      Btrfs: incremental send, fix invalid paths for rename operations · 4122ea64
      Filipe Manana authored
      Example scenario:
      
        Parent snapshot:
      
        .                                                       (ino 277)
        |---- tmp/                                              (ino 278)
        |---- pre/                                              (ino 280)
        |      |---- wait_dir/                                  (ino 281)
        |
        |---- desc/                                             (ino 282)
        |---- ance/                                             (ino 283)
        |       |---- below_ance/                               (ino 279)
        |
        |---- other_dir/                                        (ino 284)
      
        Send snapshot:
      
        .                                                       (ino 277)
        |---- tmp/                                              (ino 278)
               |---- other_dir/                                 (ino 284)
                         |---- below_ance/                      (ino 279)
                         |            |---- pre/                (ino 280)
                         |
                         |---- wait_dir/                        (ino 281)
                                    |---- desc/                 (ino 282)
                                            |---- ance/         (ino 283)
      
      While computing the send stream the following steps happen:
      
      1) While processing inode 279 we end up delaying its rename operation
         because its new parent in the send snapshot, inode 284, was not
         yet processed and therefore not yet renamed;
      
      2) Later when processing inode 280 we end up renaming it immediately to
         "ance/below_once/pre" and not delay its rename operation because its
         new parent (inode 279 in the send snapshot) has its rename operation
         delayed and inode 280 is not an encestor of inode 279 (its parent in
         the send snapshot) in the parent snapshot;
      
      3) When processing inode 281 we end up delaying its rename operation
         because its new parent in the send snapshot, inode 284, was not yet
         processed and therefore not yet renamed;
      
      4) When processing inode 282 we do not delay its rename operation because
         its parent in the send snapshot, inode 281, already has its own rename
         operation delayed and our current inode (282) is not an ancestor of
         inode 281 in the parent snapshot. Therefore inode 282 is renamed to
         "ance/below_ance/pre/wait_dir";
      
      5) When processing inode 283 we realize that we can rename it because one
         of its ancestors in the send snapshot, inode 281, has its rename
         operation delayed and inode 283 is not an ancestor of inode 281 in the
         parent snapshot. So a rename operation to rename inode 283 to
         "ance/below_ance/pre/wait_dir/desc/ance" is issued. This path is
         invalid due to a missing path building loop that was undetected by
         the incremental send implementation, as inode 283 ends up getting
         included twice in the path (once with its path in the parent snapshot).
         Therefore its rename operation must wait before the ancestor inode 284
         is renamed.
      
      Fix this by not terminating the rename dependency checks when we find an
      ancestor, in the send snapshot, that has its rename operation delayed. So
      that we continue doing the same checks if the current inode is not an
      ancestor, in the parent snapshot, of an ancestor in the send snapshot we
      are processing in the loop.
      
      The problem and reproducer were reported by Robbie Ko, as part of a patch
      titled "Btrfs: incremental send, avoid ancestor rename to descendant".
      However the fix was unnecessarily complicated and can be addressed with
      much less code and effort.
      Reported-by: default avatarRobbie Ko <robbieko@synology.com>
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      4122ea64
    • Filipe Manana's avatar
      Btrfs: send, add missing error check for calls to path_loop() · 7969e77a
      Filipe Manana authored
      The function path_loop() can return a negative integer, signaling an
      error, 0 if there's no path loop and 1 if there's a path loop. We were
      treating any non zero values as meaning that a path loop exists. Fix
      this by explicitly checking for errors and gracefully return them to
      user space.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      7969e77a
    • Robbie Ko's avatar
      Btrfs: send, fix failure to move directories with the same name around · 801bec36
      Robbie Ko authored
      When doing an incremental send we can end up not moving directories that
      have the same name. This happens when the same parent directory has
      different child directories with the same name in the parent and send
      snapshots.
      
      For example, consider the following scenario:
      
        Parent snapshot:
      
        .                   (ino 256)
        |---- d/            (ino 257)
        |     |--- p1/      (ino 258)
        |
        |---- p1/           (ino 259)
      
        Send snapshot:
      
        .                    (ino 256)
        |--- d/              (ino 257)
             |--- p1/        (ino 259)
                   |--- p1/  (ino 258)
      
      The directory named "d" (inode 257) has in both snapshots an entry with
      the name "p1" but it refers to different inodes in both snapshots (inode
      258 in the parent snapshot and inode 259 in the send snapshot). When
      attempting to move inode 258, the operation is delayed because its new
      parent, inode 259, was not yet moved/renamed (as the stream is currently
      processing inode 258). Then when processing inode 259, we also end up
      delaying its move/rename operation so that it happens after inode 258 is
      moved/renamed. This decision to delay the move/rename rename operation
      of inode 259 is due to the fact that the new parent inode (257) still
      has inode 258 as its child, which has the same name has inode 259. So
      we end up with inode 258 move/rename operation waiting for inode's 259
      move/rename operation, which in turn it waiting for inode's 258
      move/rename. This results in ending the send stream without issuing
      move/rename operations for inodes 258 and 259 and generating the
      following warnings in syslog/dmesg:
      
      [148402.979747] ------------[ cut here ]------------
      [148402.980588] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6177 btrfs_ioctl_send+0xe03/0xe51 [btrfs]
      [148402.981928] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
      [148402.986999] CPU: 14 PID: 4117 Comm: btrfs Tainted: G        W       4.6.0-rc7-btrfs-next-31+ #1
      [148402.988136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
      [148402.988136]  0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
      [148402.988136]  0000000000000000 ffff88022139fce8 ffffffff81052b14 000018212139fac8
      [148402.988136]  ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
      [148402.988136] Call Trace:
      [148402.988136]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
      [148402.988136]  [<ffffffff81052b14>] __warn+0xc2/0xdd
      [148402.988136]  [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
      [148402.988136]  [<ffffffffa04bc831>] btrfs_ioctl_send+0xe03/0xe51 [btrfs]
      [148402.988136]  [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
      [148402.988136]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
      [148402.988136]  [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
      [148402.988136]  [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
      [148402.988136]  [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
      [148402.988136]  [<ffffffff81196f0c>] ? __fget+0x6b/0x77
      [148402.988136]  [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
      [148402.988136]  [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
      [148402.988136]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
      [148402.988136]  [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
      [148403.011373] ---[ end trace a4539270c8056f8b ]---
      [148403.012296] ------------[ cut here ]------------
      [148403.013071] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6194 btrfs_ioctl_send+0xe19/0xe51 [btrfs]
      [148403.014447] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
      [148403.019708] CPU: 14 PID: 4117 Comm: btrfs Tainted: G        W       4.6.0-rc7-btrfs-next-31+ #1
      [148403.020104] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
      [148403.020104]  0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
      [148403.020104]  0000000000000000 ffff88022139fce8 ffffffff81052b14 000018322139fac8
      [148403.020104]  ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
      [148403.020104] Call Trace:
      [148403.020104]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
      [148403.020104]  [<ffffffff81052b14>] __warn+0xc2/0xdd
      [148403.020104]  [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
      [148403.020104]  [<ffffffffa04bc847>] btrfs_ioctl_send+0xe19/0xe51 [btrfs]
      [148403.020104]  [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
      [148403.020104]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
      [148403.020104]  [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
      [148403.020104]  [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
      [148403.020104]  [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
      [148403.020104]  [<ffffffff81196f0c>] ? __fget+0x6b/0x77
      [148403.020104]  [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
      [148403.020104]  [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
      [148403.020104]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
      [148403.020104]  [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
      [148403.038981] ---[ end trace a4539270c8056f8c ]---
      
      There's another issue caused by similar (but more complex) changes in the
      directory hierarchy that makes move/rename operations fail, described with
      the following example:
      
        Parent snapshot:
      
        .
        |---- a/                                                   (ino 262)
        |     |---- c/                                             (ino 268)
        |
        |---- d/                                                   (ino 263)
              |---- ance/                                          (ino 267)
                      |---- e/                                     (ino 264)
                      |---- f/                                     (ino 265)
                      |---- ance/                                  (ino 266)
      
        Send snapshot:
      
        .
        |---- a/                                                   (ino 262)
        |---- c/                                                   (ino 268)
        |     |---- ance/                                          (ino 267)
        |
        |---- d/                                                   (ino 263)
        |     |---- ance/                                          (ino 266)
        |
        |---- f/                                                   (ino 265)
              |---- e/                                             (ino 264)
      
      When the inode 265 is processed, the path for inode 267 is computed, which
      at that time corresponds to "d/ance", and it's stored in the names cache.
      Later on when processing inode 266, we end up orphanizing (renaming to a
      name matching the pattern o<ino>-<gen>-<seq>) inode 267 because it has
      the same name as inode 266 and it's currently a child of the new parent
      directory (inode 263) for inode 266. After the orphanization and while we
      are still processing inode 266, a rename operation for inode 266 is
      generated. However the source path for that rename operation is incorrect
      because it ends up using the old, pre-orphanization, name of inode 267.
      The no longer valid name for inode 267 was previously cached when
      processing inode 265 and it remains usable and considered valid until
      the inode currently being processed has a number greater than 267.
      This resulted in the receiving side failing with the following error:
      
        ERROR: rename d/ance/ance -> d/ance failed: No such file or directory
      
      So fix these issues by detecting such circular dependencies for rename
      operations and by clearing the cached name of an inode once the inode
      is orphanized.
      
      A test case for fstests will follow soon.
      Signed-off-by: default avatarRobbie Ko <robbieko@synology.com>
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      [Rewrote change log to be more detailed and organized, and improved
       comments]
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      801bec36
    • Filipe Manana's avatar
      Btrfs: add missing check for writeback errors on fsync · 0596a904
      Filipe Manana authored
      When we start an fsync we start ordered extents for all delalloc ranges.
      However before attempting to log the inode, we only wait for those ordered
      extents if we are not doing a full sync (bit BTRFS_INODE_NEEDS_FULL_SYNC
      is set in the inode's flags). This means that if an ordered extent
      completes with an IO error before we check if we can skip logging the
      inode, we will not catch and report the IO error to user space. This is
      because on an IO error, when the ordered extent completes we do not
      update the inode, so if the inode was not previously updated by the
      current transaction we end up not logging it through calls to fsync and
      therefore not check its mapping flags for the presence of IO errors.
      
      Fix this by checking for errors in the flags of the inode's mapping when
      we notice we can skip logging the inode.
      
      This caused sporadic failures in the test generic/331 (which explicitly
      tests for IO errors during an fsync call).
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      0596a904
  2. 21 Jul, 2016 1 commit
    • Chris Mason's avatar
      Btrfs: fix delalloc accounting after copy_from_user faults · 8b8b08cb
      Chris Mason authored
      Commit 56244ef1 was almost but not quite enough to fix the
      reservation math after btrfs_copy_from_user returned partial copies.
      
      Some users are still seeing warnings in btrfs_destroy_inode, and with a
      long enough test run I'm able to trigger them as well.
      
      This patch fixes the accounting math again, bringing it much closer to
      the way it was before the sectorsize conversion Chandan did.  The
      problem is accounting for the offset into the page/sector when we do a
      partial copy.  This one just uses the dirty_sectors variable which
      should already be updated properly.
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      cc: stable@vger.kernel.org # v4.6+
      8b8b08cb
  3. 20 Jul, 2016 2 commits
  4. 07 Jul, 2016 18 commits
    • Josef Bacik's avatar
      Btrfs: use FLUSH_LIMIT for relocation in reserve_metadata_bytes · 8ca17f0f
      Josef Bacik authored
      We used to allow you to set FLUSH_ALL and then just wouldn't do things like
      commit transactions or wait on ordered extents if we noticed you were in a
      transaction.  However now that all the flushing for FLUSH_ALL is asynchronous
      we've lost the ability to tell, and we could end up deadlocking.  So instead use
      FLUSH_LIMIT in reserve_metadata_bytes in relocation and then return -EAGAIN if
      we error out to preserve the previous behavior.  I've also added an ASSERT() to
      catch anybody else who tries to do this.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      8ca17f0f
    • Josef Bacik's avatar
      Btrfs: fill relocation block rsv after allocation · ac2fabac
      Josef Bacik authored
      Since we set the reloc control before we've reserved our space for relocation we
      could race with a root being dirtied and not actually have space to do our init
      reloc root.  So once we've allocated it and set it up go ahead and make our
      reservation before setting the relocate control, that way anybody who tries to
      do the reloc root init has space to use.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      ac2fabac
    • Josef Bacik's avatar
      Btrfs: always use trans->block_rsv for orphans · 40acc3ee
      Josef Bacik authored
      This is the case all the time anyway except for relocation which could be doing
      a reloc root for a non ref counted root, in which case we'd end up with some
      random block rsv rather than the one we have our reservation in.  If there isn't
      enough space in the block rsv we are trying to steal from we'll BUG() because we
      expect there to be space for the orphan to make its reservation.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      40acc3ee
    • Josef Bacik's avatar
      Btrfs: change how we calculate the global block rsv · ae2e4728
      Josef Bacik authored
      Traditionally we've calculated the global block rsv by guessing how much of the
      metadata used amount was the extent tree, and then taking the data size and
      figuring out how large the csum tree would have to be to hold that much data.
      
      This is imprecise and falls down on MIXED file systems as we can't trust the
      data used amount.  This resulted in failures for xfstests generic/333 because it
      creates lots of clones, which explodes out the extent tree.  Our global reserve
      calculations were woefully inaccurate in this case which meant we got into a
      situation where we did not have enough reserved to do our work.
      
      We know we only use the global block rsv for the extent, csum, and root trees,
      so just get the bytes used for these trees and use that as the basis of our
      global reserve.  Since these are not reference counted trees the bytes_used
      value will be accurate.  This fixed the transaction aborts seen with
      generic/333.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      ae2e4728
    • Josef Bacik's avatar
      Btrfs: use root when checking need_async_flush · 87241c2e
      Josef Bacik authored
      Instead of doing fs_info->fs_root in need_async_flush, which may not be set
      during recovery when mounting, just pass the root itself in, which makes more
      sense as thats what btrfs_calc_reclaim_metadata_size takes.
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Reported-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      87241c2e
    • Josef Bacik's avatar
      Btrfs: don't bother kicking async if there's nothing to reclaim · d38b349c
      Josef Bacik authored
      We do this check when we start the async reclaimer thread, might as well check
      before we kick it off to save us some cycles.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      d38b349c
    • Josef Bacik's avatar
      Btrfs: fix release reserved extents trace points · 31bada7c
      Josef Bacik authored
      We were doing trace_btrfs_release_reserved_extent() in pin_down_extent which
      isn't quite right because we will go through and free that extent later when we
      unpin, so it messes up apps that are accounting for the reservation space.  We
      were also unconditionally doing it in __btrfs_free_reserved_extent(), when we
      only actually free the reservation instead of pinning the extent.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      31bada7c
    • Josef Bacik's avatar
      Btrfs: add fsid to some tracepoints · dce3afa5
      Josef Bacik authored
      When tracing enospc problems on a box with multiple file systems mounted I need
      to be able to differentiate between the two file systems.  Most of the important
      trace points I'm looking at already have an fsid, but the reserved extent trace
      points do not, so add that to make it possible to figure out which trace point
      belongs to which file system.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      dce3afa5
    • Josef Bacik's avatar
      Btrfs: add tracepoints for flush events · f376df2b
      Josef Bacik authored
      We want to track when we're triggering flushing from our reservation code and
      what flushing is being done when we start flushing.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      f376df2b
    • Josef Bacik's avatar
      Btrfs: fix delalloc reservation amount tracepoint · f485c9ee
      Josef Bacik authored
      We can sometimes drop the reservation we had for our inode, so we need to remove
      that amount from to_reserve so that our tracepoint reports a valid amount of
      space.
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      f485c9ee
    • Josef Bacik's avatar
      Btrfs: trace pinned extents · c51e7bb1
      Josef Bacik authored
      Pinned extents are an important metric to keep track of for enospc.
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      c51e7bb1
    • Josef Bacik's avatar
      Btrfs: introduce ticketed enospc infrastructure · 957780eb
      Josef Bacik authored
      Our enospc flushing sucks.  It is born from a time where we were early
      enospc'ing constantly because multiple threads would race in for the same
      reservation and randomly starve other ones out.  So I came up with this solution
      to block any other reservations from happening while one guy tried to flush
      stuff to satisfy his reservation.  This gives us pretty good correctness, but
      completely crap latency.
      
      The solution I've come up with is ticketed reservations.  Basically we try to
      make our reservation, and if we can't we put a ticket on a list in order and
      kick off an async flusher thread.  This async flusher thread does the same old
      flushing we always did, just asynchronously.  As space is freed and added back
      to the space_info it checks and sees if we have any tickets that need
      satisfying, and adds space to the tickets and wakes up anything we've satisfied.
      
      Once the flusher thread stops making progress it wakes up all the current
      tickets and tells them to take a hike.
      
      There is a priority list for things that can't flush, since the async flusher
      could do anything we need to avoid deadlocks.  These guys get priority for
      having their reservation made, and will still do manual flushing themselves in
      case the async flusher isn't running.
      
      This patch gives us significantly better latencies.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      957780eb
    • Josef Bacik's avatar
      Btrfs: add tracepoint for adding block groups · c83f8eff
      Josef Bacik authored
      I'm writing a tool to visualize the enospc system inside btrfs, I need this
      tracepoint in order to keep track of the block groups in the system.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      c83f8eff
    • Josef Bacik's avatar
      Btrfs: warn_on for unaccounted spaces · d555b6c3
      Josef Bacik authored
      These were hidden behind enospc_debug, which isn't helpful as they indicate
      actual bugs, unlike the rest of the enospc_debug stuff which is really debug
      information.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      d555b6c3
    • Josef Bacik's avatar
      Btrfs: change delayed reservation fallback behavior · c48f49d6
      Josef Bacik authored
      We reserve space for the inode update when we first reserve space for writing to
      a file.  However there are lots of ways that we can use this reservation and not
      have it for subsequent ordered extents.  Previously we'd fall through and try to
      reserve metadata bytes for this, then we'd just steal the full reservation from
      the delalloc_block_rsv, and if that didn't have enough space we'd steal the full
      reservation from the global reserve.  The problem with this is we can easily
      just return ENOSPC and fallback to updating the inode item directly.  In the
      worst case (assuming 4k nodesize) we'd steal 64kib from the global reserve if we
      fall all the way through, however if we just fallback and update the inode
      directly we'd only steal 4k * BTRFS_PATH_MAX in the worst case which is 32kib.
      
      We would have also just added the extent item for the inode so we likely will
      have already cow'ed down most of the way to the leaf containing the inode item,
      so we are more often than not only need one or two nodesize's worth of
      reservations.  Given the reservation for the extent itself is also a worst case
      we will likely already have space to cover the inode update.
      
      This change will make us behave better in the theoretical worst case, and much
      better in the case that we don't have our reservation and cannot reserve more
      metadata.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      c48f49d6
    • Josef Bacik's avatar
      Btrfs: always reserve metadata for delalloc extents · 48c3d480
      Josef Bacik authored
      There are a few races in the metadata reservation stuff.  First we add the bytes
      to the block_rsv well after we've set the bit on the inode saying that we have
      space for it and after we've reserved the bytes.  So use the normal
      btrfs_block_rsv_add helper for this case.  Secondly we can flush delalloc
      extents when we try to reserve space for our write, which means that we could
      have used up the space for the inode and we wouldn't know because we only check
      before the reservation.  So instead make sure we are always reserving space for
      the inode update, and then if we don't need it release those bytes afterward.
      Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      48c3d480
    • Josef Bacik's avatar
      Btrfs: fix callers of btrfs_block_rsv_migrate · 25d609f8
      Josef Bacik authored
      So btrfs_block_rsv_migrate just unconditionally calls block_rsv_migrate_bytes.
      Not only this but it unconditionally changes the size of the block_rsv.  This
      isn't a bug strictly speaking, but it makes truncate block rsv's look funny
      because every time we migrate bytes over its size grows, even though we only
      want it to be a specific size.  So collapse this into one function that takes an
      update_size argument and make truncate and evict not update the size for
      consistency sake.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      25d609f8
    • Josef Bacik's avatar
      Btrfs: add bytes_readonly to the spaceinfo at once · e40edf2d
      Josef Bacik authored
      For some reason we're adding bytes_readonly to the space info after we update
      the space info with the block group info.  This creates a tiny race where we
      could over-reserve space because we haven't yet taken out the bytes_readonly
      bit.  Since we already know this information at the time we call
      update_space_info, just pass it along so it can be updated all at once.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      e40edf2d
  5. 04 Jul, 2016 1 commit
  6. 03 Jul, 2016 5 commits
  7. 02 Jul, 2016 6 commits
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux · 99b0f54e
      Linus Torvalds authored
      Pull drm fixes frlm Dave Airlie:
       "Just some AMD and Intel fixes, the AMD ones are further production
        Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID
        changes and a couple of other fixes.
      
        Still a bit Internet challenged here, hopefully end of next week will
        solve it"
      
      * tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux:
        drm/i915: Fix missing unlock on error in i915_ppgtt_info()
        drm/amd/powerplay: workaround for UVD clock issue
        drm/amdgpu: add ACLK_CNTL setting for polaris10
        drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
        drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
        drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
        drm/i915: Add more Kabylake PCI IDs.
        drm/i915: Avoid early timeout during AUX transfers
        drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
        drm/i915/lpt: Avoid early timeout during FDI PHY reset
        drm/i915/bxt: Avoid early timeout during PLL enable
        drm/i915: Refresh cached DP port register value on resume
        drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
        drm/amd/powerplay: disable FFC.
        drm/amd/powerplay: add some definition for FFC feature on polaris.
      99b0f54e
    • Linus Torvalds's avatar
      Merge tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · 467ce769
      Linus Torvalds authored
      Pull spi fixes from Mark Brown:
       "A few small driver-specific fixes for SPI, all in the normal important
        if you hit them category especially the rockchip driver fix which
        addresses a race which has been exposed more frequently with some
        recent performance improvements"
      
      * tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
        spi: sunxi: fix transfer timeout
        spi: sun4i: fix FIFO limit
        spi: rockchip: Signal unfinished DMA transfers
        spi: spi-ti-qspi: Suspend the queue before removing the device
      467ce769
    • Linus Torvalds's avatar
      Merge tag 'regulator-fix-v4.7-rc5' of... · a2b0db5b
      Linus Torvalds authored
      Merge tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
      
      Pull regulator fixes from Mark Brown:
       "Two small fixes for the regulator subsystem - one fixing a crash with
        one of the devices supported by the max77620 driver, another fixing
        startup for the anatop regulator when it starts up with the regulator
        in bypass mode"
      
      * tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: max77620: check for valid regulator info
        regulator: anatop: allow regulator to be in bypass mode
      a2b0db5b
    • Linus Torvalds's avatar
      Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · 44385120
      Linus Torvalds authored
      Pull clk fixes from Stephen Boyd:
       "A small fix for the newly added oxnas clk driver and a handful of
        rockchip clk driver fixes for newly added rk3399 support"
      
      * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
        clk: Fix return value check in oxnas_stdclk_probe()
        clk: rockchip: release io resource when failing to init clk on rk3399
        clk: rockchip: fix cpuclk registration error handling
        clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
        clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
        clk: rockchip: mark rk3399 GIC clocks as critical
        clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
      44385120
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel into drm-fixes · 88c08710
      Dave Airlie authored
      here's a batch of i915 fixes for 4.7.
      
      * tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel:
        drm/i915: Fix missing unlock on error in i915_ppgtt_info()
        drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
        drm/i915: Add more Kabylake PCI IDs.
        drm/i915: Avoid early timeout during AUX transfers
        drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
        drm/i915/lpt: Avoid early timeout during FDI PHY reset
        drm/i915/bxt: Avoid early timeout during PLL enable
        drm/i915: Refresh cached DP port register value on resume
      88c08710
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · 40793e85
      Dave Airlie authored
      Just a few more late fixes for Polaris cards.
      
      * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
        drm/amd/powerplay: workaround for UVD clock issue
        drm/amdgpu: add ACLK_CNTL setting for polaris10
        drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
        drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
        drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
        drm/amd/powerplay: disable FFC.
        drm/amd/powerplay: add some definition for FFC feature on polaris.
      40793e85
  8. 01 Jul, 2016 1 commit
    • Ralf Baechle's avatar
      MIPS: Fix possible corruption of cache mode by mprotect. · 6d037de9
      Ralf Baechle authored
      The following testcase may result in a page table entries with a invalid
      CCA field being generated:
      
      static void *bindstack;
      
      static int sysrqfd;
      
      static void protect_low(int protect)
      {
      	mprotect(bindstack, BINDSTACK_SIZE, protect);
      }
      
      static void sigbus_handler(int signal, siginfo_t * info, void *context)
      {
      	void *addr = info->si_addr;
      
      	write(sysrqfd, "x", 1);
      
      	printf("sigbus, fault address %p (should not happen, but might)\n",
      	       addr);
      	abort();
      }
      
      static void run_bind_test(void)
      {
      	unsigned int *p = bindstack;
      
      	p[0] = 0xf001f001;
      
      	write(sysrqfd, "x", 1);
      
      	/* Set trap on access to p[0] */
      	protect_low(PROT_NONE);
      
      	write(sysrqfd, "x", 1);
      
      	/* Clear trap on access to p[0] */
      	protect_low(PROT_READ | PROT_WRITE | PROT_EXEC);
      
      	write(sysrqfd, "x", 1);
      
      	/* Check the contents of p[0] */
      	if (p[0] != 0xf001f001) {
      		write(sysrqfd, "x", 1);
      
      		/* Reached, but shouldn't be */
      		printf("badness, shouldn't happen but does\n");
      		abort();
      	}
      }
      
      int main(void)
      {
      	struct sigaction sa;
      
      	sysrqfd = open("/proc/sysrq-trigger", O_WRONLY);
      
      	if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) {
      		perror("sigprocmask");
      		return 0;
      	}
      
      	sa.sa_sigaction = sigbus_handler;
      	sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART;
      	if (sigaction(SIGBUS, &sa, NULL)) {
      		perror("sigaction");
      		return 0;
      	}
      
      	bindstack = mmap(NULL,
      			 BINDSTACK_SIZE,
      			 PROT_READ | PROT_WRITE | PROT_EXEC,
      			 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
      	if (bindstack == MAP_FAILED) {
      		perror("mmap bindstack");
      		return 0;
      	}
      
      	printf("bindstack: %p\n", bindstack);
      
      	run_bind_test();
      
      	printf("done\n");
      
      	return 0;
      }
      
      There are multiple ingredients for this:
      
       1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3
          on all platforms except SB1 where it's CCA 5.
       2) _page_cachable_default must have bits set which are not set
          _CACHE_CACHABLE_NONCOHERENT.
       3) Either the defective version of pte_modify for XPA or the standard
          version must be in used.  However pte_modify for the 36 bit address
          space support is no affected.
      
      In that case additional bits in the final CCA mode may generate an invalid
      value for the CCA field.  On the R10000 system where this was tracked
      down for example a CCA 7 has been observed, which is Uncached Accelerated.
      
      Fixed by:
      
       1) Using the proper CCA mode for PAGE_NONE just like for all the other
          PAGE_* pte/pmd bits.
       2) Fix the two affected variants of pte_modify.
      
      Further code inspection also shows the same issue to exist in pmd_modify
      which would affect huge page systems.
      
      Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE
      and pmd_modify issue found by me.
      
      The history of this goes back beyond Linus' git history.  Chris Dearman's
      commit 35133692 ("[MIPS] Allow setting of
      the cache attribute at run time.") missed the opportunity to fix this
      but it was originally introduced in lmo commit
      d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.")
      and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option
      CONFIG_MIPS_UNCACHED.")
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Reported-by: default avatarAlastair Bridgewater <alastair.bridgewater@gmail.com>
      6d037de9