- 12 Jul, 2019 40 commits
-
-
Mike Rapoport authored
The ARCH_SELECT_MEMORY_MODEL option is enabled only for 64-bit. However, 64-bit configuration also enables ARCH_SPARSEMEM_DEFAULT and there is no ARCH_FLATMEM_ENABLE in arch/sparc/Kconfig. With such settings, the dependencies in mm/Kconfig are always evaluated to SPARSEMEM=y for 64-bit and to FLATMEM=y for 32-bit. The ARCH_SELECT_MEMORY_MODEL option in arch/sparc/Kconfig does not affect anything and can be removed. Link: http://lkml.kernel.org/r/1556740577-4140-4-git-send-email-rppt@linux.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The only reason s390 has ARCH_SELECT_MEMORY_MODEL option in arch/s390/Kconfig is an ancient compile error with allnoconfig which was fixed by commit 97195d6b ("[S390] fix sparsemem related compile error with allnoconfig on s390") by adding the ARCH_SELECT_MEMORY_MODEL option. Since then a lot have changed and now allnoconfig builds just fine without ARCH_SELECT_MEMORY_MODEL, so it can be removed. Link: http://lkml.kernel.org/r/1556740577-4140-3-git-send-email-rppt@linux.ibm.comSigned-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Mike Rapoport authored
Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect". For several architectures the ARCH_SELECT_MEMORY_MODEL has no real effect because the dependencies for the memory model are always evaluated to a single value. Remove the ARCH_SELECT_MEMORY_MODEL from the Kconfigs for these architectures. This patch (of 3): The ARCH_SELECT_MEMORY_MODEL in arch/arm/Kconfig is enabled only when ARCH_SPARSEMEM_ENABLE=y. But in this case, ARCH_SPARSEMEM_DEFAULT is also enabled and this in turn enables SPARSEMEM_MANUAL. Since there is no definition of ARCH_FLATMEM_ENABLE in arch/arm/Kconfig, SPARSEMEM_MANUAL is the only enabled memory model, hence the final selection will evaluate to SPARSEMEM=y. Since ARCH_SPARSEMEM_ENABLE is set to 'y' only by several sub-arch configurations, the default for must sub-arches would be the falback to FLATMEM regardless of ARCH_SELECT_MEMORY_MODEL. Link: http://lkml.kernel.org/r/1556740577-4140-2-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Andrew Morton authored
It has no callers and there is no virt_to_pfn_t(). Reported-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
-
Marco Elver authored
ksize() has been unconditionally unpoisoning the whole shadow memory region associated with an allocation. This can lead to various undetected bugs, for example, double-kzfree(). Specifically, kzfree() uses ksize() to determine the actual allocation size, and subsequently zeroes the memory. Since ksize() used to just unpoison the whole shadow memory region, no invalid free was detected. This patch addresses this as follows: 1. Add a check in ksize(), and only then unpoison the memory region. 2. Preserve kasan_unpoison_slab() semantics by explicitly unpoisoning the shadow memory region using the size obtained from __ksize(). Tested: 1. With SLAB allocator: a) normal boot without warnings; b) verified the added double-kzfree() is detected. 2. With SLUB allocator: a) normal boot without warnings; b) verified the added double-kzfree() is detected. [elver@google.com: s/BUG_ON/WARN_ON_ONCE/, per Kees] Link: http://lkml.kernel.org/r/20190627094445.216365-6-elver@google.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199359 Link: http://lkml.kernel.org/r/20190626142014.141844-6-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Marco Elver authored
This refactors common code of ksize() between the various allocators into slab_common.c: __ksize() is the allocator-specific implementation without instrumentation, whereas ksize() includes the required KASAN logic. Link: http://lkml.kernel.org/r/20190626142014.141844-5-elver@google.comSigned-off-by:
Christoph Lameter <cl@linux.com> Reviewed-by:
-
Marco Elver authored
Add a simple test that checks if double-kzfree is being detected correctly. Link: http://lkml.kernel.org/r/20190626142014.141844-4-elver@google.comSigned-off-by:
-
Marco Elver authored
This changes {,__}kasan_check_{read,write} functions to return a boolean denoting if the access was valid or not. [sfr@canb.auug.org.au: include types.h for "bool"] Link: http://lkml.kernel.org/r/20190705184949.13cdd021@canb.auug.org.au Link: http://lkml.kernel.org/r/20190626142014.141844-3-elver@google.comSigned-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Marco Elver authored
Patch series "mm/kasan: Add object validation in ksize()", v3. This patch (of 5): This introduces __kasan_check_{read,write}. __kasan_check functions may be used from anywhere, even compilation units that disable instrumentation selectively. This change eliminates the need for the __KASAN_INTERNAL definition. [elver@google.com: v5] Link: http://lkml.kernel.org/r/20190708170706.174189-2-elver@google.com Link: http://lkml.kernel.org/r/20190626142014.141844-2-elver@google.comSigned-off-by:Mark Rutland <mark.rutland@arm.com> Reviewed-by:
-
Marco Elver authored
This adds a new header to asm-generic to allow optionally instrumenting architecture-specific asm implementations of bitops. This change includes the required change for x86 as reference and changes the kernel API doc to point to bitops-instrumented.h instead. Rationale: the functions in x86's bitops.h are no longer the kernel API functions, but instead the arch_ prefixed functions, which are then instrumented via bitops-instrumented.h. Other architectures can similarly add support for asm implementations of bitops. The documentation text was derived from x86 and existing bitops asm-generic versions: 1) references to x86 have been removed; 2) as a result, some of the text had to be reworded for clarity and consistency. Tested using lib/test_kasan with bitops tests (pre-requisite patch). Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=198439 Link: http://lkml.kernel.org/r/20190613125950.197667-4-elver@google.comSigned-off-by:
-
Marco Elver authored
This patch is a pre-requisite for enabling KASAN bitops instrumentation; using static_cpu_has instead of boot_cpu_has avoids instrumentation of test_bit inside the uaccess region. With instrumentation, the KASAN check would otherwise be flagged by objtool. For consistency, kernel/signal.c was changed to mirror this change, however, is never instrumented with KASAN (currently unsupported under x86 32bit). Link: http://lkml.kernel.org/r/20190613125950.197667-3-elver@google.comSigned-off-by:
H. Peter Anvin <hpa@zytor.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
-
Marco Elver authored
Patch series "Bitops instrumentation for KASAN", v5. This patch (of 3): This adds bitops tests to the test_kasan module. In a follow-up patch, support for bitops instrumentation will be added. Link: http://lkml.kernel.org/r/20190613125950.197667-2-elver@google.comSigned-off-by:
-
Marco Elver authored
This adds support for printing stack frame description on invalid stack accesses. The frame description is embedded by the compiler, which is parsed and then pretty-printed. Currently, we can only print the stack frame info for accesses to the task's own stack, but not accesses to other tasks' stacks. Example of what it looks like: page dumped because: kasan: bad access detected addr ffff8880673ef98a is located in stack of task insmod/2008 at offset 106 in frame: kasan_stack_oob+0x0/0xf5 [test_kasan] this frame has 2 objects: [32, 36) 'i' [96, 106) 'stack_array' Memory state around the buggy address: Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198435 Link: http://lkml.kernel.org/r/20190522100048.146841-1-elver@google.comSigned-off-by:
-
André Almeida authored
Wikipedia now has a main article to "tracing garbage collector" topic. Change the URL and use the reStructuredText syntax for hyperlinks and add more details about the use of the tool. Add a section about how to use the kmemleak-test module to test the memory leak scanning. Link: http://lkml.kernel.org/r/20190612155231.19448-2-andrealmeid@collabora.comSigned-off-by:
André Almeida <andrealmeid@collabora.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
André Almeida authored
According to POSIX, EBUSY means that the "device or resource is busy", and this can lead to people thinking that the file `/sys/kernel/debug/kmemleak/` is somehow locked or being used by other process. Change this error code to a more appropriate one. Link: http://lkml.kernel.org/r/20190612155231.19448-1-andrealmeid@collabora.comSigned-off-by:
-
Dmitry Vyukov authored
in_softirq() is a wrong predicate to check if we are in a softirq context. It also returns true if we have BH disabled, so objects are falsely stamped with "softirq" comm. The correct predicate is in_serving_softirq(). If user does cat from /sys/kernel/debug/kmemleak previously they would see this, which is clearly wrong, this is system call context (see the comm): unreferenced object 0xffff88805bd661c0 (size 64): comm "softirq", pid 0, jiffies 4294942959 (age 12.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<0000000007dcb30c>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000007dcb30c>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000007dcb30c>] slab_alloc mm/slab.c:3326 [inline] [<0000000007dcb30c>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<00000000969722b7>] kmalloc include/linux/slab.h:547 [inline] [<00000000969722b7>] kzalloc include/linux/slab.h:742 [inline] [<00000000969722b7>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<00000000969722b7>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<00000000a4134b5f>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<00000000d20248ad>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957 [<000000003d367be7>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<000000003c7c76af>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<000000000c1aeb23>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130 [<000000000157b92b>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078 [<00000000a9f3d058>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000a9f3d058>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000a9f3d058>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<000000001b8da885>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301 [<00000000ba770c62>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 now they will see this: unreferenced object 0xffff88805413c800 (size 64): comm "syz-executor.4", pid 8960, jiffies 4294994003 (age 14.350s) hex dump (first 32 bytes): 00 7a 8a 57 80 88 ff ff e0 00 00 01 00 00 00 00 .z.W............ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<00000000c5d3be64>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000c5d3be64>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000c5d3be64>] slab_alloc mm/slab.c:3326 [inline] [<00000000c5d3be64>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<0000000023865be2>] kmalloc include/linux/slab.h:547 [inline] [<0000000023865be2>] kzalloc include/linux/slab.h:742 [inline] [<0000000023865be2>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<0000000023865be2>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<000000003029a9d4>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<00000000ccd0a87c>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957 [<00000000a85a3785>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<00000000ec13c18d>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<0000000052d748e3>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130 [<00000000512f1014>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078 [<00000000181758bc>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000181758bc>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000181758bc>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<00000000d4b73623>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301 [<00000000c1098bec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: http://lkml.kernel.org/r/20190517171507.96046-1-dvyukov@gmail.comSigned-off-by:Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
Shakeel Butt authored
Currently for CONFIG_SLUB, if a memcg kmem cache creation is failed and the corresponding root kmem cache has SLAB_PANIC flag, the kernel will be crashed. This is unnecessary as the kernel can handle the creation failures of memcg kmem caches. Additionally CONFIG_SLAB does not implement this behavior. So, to keep the behavior consistent between SLAB and SLUB, removing the panic for memcg kmem cache creation failures. The root kmem cache creation failure for SLAB_PANIC correctly panics for both SLAB and SLUB. Link: http://lkml.kernel.org/r/20190619232514.58994-1-shakeelb@google.comReported-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Roman Gushchin <guro@fb.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Yury Norov authored
If ',' is not found, kmem_cache_flags() calls strlen() to find the end of line. We can do it in a single pass using strchrnul(). Link: http://lkml.kernel.org/r/20190501053111.7950-1-ynorov@marvell.comSigned-off-by:
Yury Norov <ynorov@marvell.com> Acked-by:
Aaron Tomlin <atomlin@redhat.com> Reviewed-by:
-
Kees Cook authored
This adds tests for double free and cross-cache freeing, which should both be caught by CONFIG_SLAB_FREELIST_HARDENED. Link: http://lkml.kernel.org/r/20190530045017.15252-4-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
This avoids any possible type confusion when looking up an object. For example, if a non-slab were to be passed to kfree(), the invalid slab_cache pointer (i.e. overlapped with some other value from the struct page union) would be used for subsequent slab manipulations that could lead to further memory corruption. Since the page is already in cache, adding the PageSlab() check will have nearly zero cost, so add a check and WARN() to virt_to_cache(). Additionally replaces an open-coded virt_to_cache(). To support the failure mode this also updates all callers of virt_to_cache() and cache_from_obj() to handle a NULL cache pointer return value (though note that several already handle this case gracefully). [dan.carpenter@oracle.com: restore IRQs in kfree()] Link: http://lkml.kernel.org/r/20190613065637.GE16334@mwanda Link: http://lkml.kernel.org/r/20190530045017.15252-3-keescook@chromium.orgSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Alexander Potapenko <glider@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Kees Cook authored
Patch series "mm/slab: Improved sanity checking". This adds defenses against slab cache confusion (as seen in real-world exploits[1]) and gracefully handles type confusions when trying to look up slab caches from an arbitrary page. (Also is patch 3: new LKDTM tests for these defenses as well as for the existing double-free detection. This patch (of 3): When building under CONFIG_SLAB_FREELIST_HARDENING, it makes sense to perform sanity-checking on the assumed slab cache during kmem_cache_free() to make sure the kernel doesn't mix freelists across slab caches and corrupt memory (as seen in the exploitation of flaws like CVE-2018-9568[1]). Note that the prior code might WARN() but still corrupt memory (i.e. return the assumed cache instead of the owned cache). There is no noticeable performance impact (changes are within noise). Measuring parallel kernel builds, I saw the following with CONFIG_SLAB_FREELIST_HARDENED, before and after this patch: before: Run times: 288.85 286.53 287.09 287.07 287.21 Min: 286.53 Max: 288.85 Mean: 287.35 Std Dev: 0.79 after: Run times: 289.58 287.40 286.97 287.20 287.01 Min: 286.97 Max: 289.58 Mean: 287.63 Std Dev: 0.99 Delta: 0.1% which is well below the standard deviation [1] https://github.com/ThomasKing2014/slides/raw/master/Building%20universal%20Android%20rooting%20with%20a%20type%20confusion%20vulnerability.pdf Link: http://lkml.kernel.org/r/20190530045017.15252-2-keescook@chromium.orgSigned-off-by:
-
Fuqian Huang authored
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20190703163147.881-1-huangfq.daxian@gmail.comSigned-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Hariprasad Kelam authored
fix below issue reported by coccicheck fs/ocfs2/dlmglue.c:4410:5-11: Unneeded variable: "status". Return "0" on line 4428 We can not change return type of ocfs2_downconvert_thread as its registered as callback of kthread_create. Link: http://lkml.kernel.org/r/20190702183237.GA13975@hari-Inspiron-1545Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove all of the variables that were being saved, and just recursively delete the whole directory when shutting down, saving a lot of logic and local variables. [gregkh@linuxfoundation.org: v2] Link: http://lkml.kernel.org/r/20190613055455.GE19717@kroah.com Link: http://lkml.kernel.org/r/20190612152912.GA19151@kroah.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Gang He authored
ocfs2 file system uses locking_state file under debugfs to dump each ocfs2 file system's dlm lock resources, but the users ever encountered some hang(deadlock) problems in ocfs2 file system. I'd like to add first lock wait time in locking_state file, which can help the upper scripts detect these deadlock problems via comparing the first lock wait time with the current time. Link: http://lkml.kernel.org/r/20190611015414.27754-3-ghe@suse.comSigned-off-by:
Gang He <ghe@suse.com> Reviewed-by:
-
Gang He authored
Add locking filter debugfs file, which is used to filter lock resources dump from locking_state debugfs file. We use d_filter_secs field to filter lock resources dump, the default d_filter_secs(0) value filters nothing, otherwise, only dump the last N seconds active lock resources. This enhancement can avoid dumping lots of old records. The d_filter_secs value can be changed via locking_filter file. [akpm@linux-foundation.org: fix undefined reference to `__udivdi3'] Link: http://lkml.kernel.org/r/20190611015414.27754-2-ghe@suse.comSigned-off-by:
-
Gang He authored
ocfs2 file system uses locking_state file under debugfs to dump each ocfs2 file system's dlm lock resources, but the dlm lock resources in memory are becoming more and more after the files were touched by the user. it will become a bit difficult to analyze these dlm lock resource records in locking_state file by the upper scripts, though some files are not active for now, which were accessed long time ago. Then, I'd like to add last pr/ex unlock times in locking_state file for each dlm lock resource record, the the upper scripts can use last unlock time to filter inactive dlm lock resource record. Link: http://lkml.kernel.org/r/20190611015414.27754-1-ghe@suse.comSigned-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct dlm_migratable_lockres { ... struct dlm_migratable_lock ml[0]; // 16 bytes each, begins at byte 112 }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(struct dlm_migratable_lockres) + (mres->num_locks * sizeof(struct dlm_migratable_lock)) with: struct_size(mres, ml, mres->num_locks) Notice that, in this case, variable sz is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Link: http://lkml.kernel.org/r/20190605204926.GA24467@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
ChenGang authored
There are some spelling mistakes in ocfs, fix it. Link: http://lkml.kernel.org/r/1558964623-106628-1-git-send-email-cg.chen@huawei.comSigned-off-by:
ChenGang <cg.chen@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Sam Ravnborg authored
When building drm/exynos for sh, as part of an allmodconfig build, the following warning triggered: exynos7_drm_decon.c: In function `decon_remove': exynos7_drm_decon.c:769:24: warning: unused variable `ctx' struct decon_context *ctx = dev_get_drvdata(&pdev->dev); The ctx variable is only used as argument to iounmap(). In sh - allmodconfig CONFIG_MMU is not defined so it ended up in: \#define __iounmap(addr) do { } while (0) \#define iounmap __iounmap Fix the warning by introducing a static inline function for iounmap. This is similar to several other architectures. Link: http://lkml.kernel.org/r/20190622114208.24427-1-sam@ravnborg.orgSigned-off-by:Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
CONFIG_BACKLIGHT_LCD_SUPPORT was removed in 8c5dc8d9 ("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now available directly. Link: http://lkml.kernel.org/r/20190603191925.20659-1-krzk@kernel.orgSigned-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
-
Kefeng Wang authored
After commit 1d0fd57a ("logfs: remove from tree"), logfs was removed, drop CONFIG_LOGFS from all defconfigs. Link: http://lkml.kernel.org/r/20190530021032.190639-1-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Colin Ian King authored
Here are some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel over the past few months. Developers keep on coming up with more inventive ways to spell words. Link: http://lkml.kernel.org/r/20190618134807.9729-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Evan Green authored
The manpage for modprobe mentions that dashes and underscores are treated interchangeably in module names. The stack trace dumps seem to print module names with underscores. Use bash to replace _ with the pattern [-_] so that file names with dashes or underscores can be found. For example, this line: [ 27.919759] hda_widget_sysfs_init+0x2b8/0x3a5 [snd_hda_core] should find a module named snd-hda-core.ko. Link: http://lkml.kernel.org/r/20190531205926.42474-1-evgreen@chromium.orgSigned-off-by:
Evan Green <evgreen@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Douglas Anderson <dianders@chromium.org> Cc: Evan Green <evgreen@chromium.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Manuel Traut <manut@linutronix.de> Signed-off-by:
-
Chris Paterson authored
Misspelling 'prohibited' is quite common in the real world, although surprisingly not so much in the Linux Kernel. In addition to fixing the typo we may as well add it to the spelling checker. Also adding the present participle (prohibiting). Link: http://lkml.kernel.org/r/20190514153341.22540-1-chris.paterson2@renesas.com Fixes: 5bf2fbbe ("clk: renesas: cpg-mssr: Add r8a77470 support") Signed-off-by:
Chris Paterson <chris.paterson2@renesas.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Acked-by:
-
Paul Walmsley authored
The RISC-V architecture has a register named the "Supervisor Exception Program Counter", or "sepc". This abbreviation triggers checkpatch.pl's misspelling detector, resulting in noise in the checkpatch output. The risk that this noise could cause more useful warnings to be missed seems to outweigh the harm of an occasional misspelling of "spec". Thus drop the "sepc" entry from the misspelling list. [akpm@linux-foundation.org: fix existing "sepc" instances, per Joe] Link: http://lkml.kernel.org/r/20190518210037.13674-1-paul.walmsley@sifive.comSigned-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Nicolas Boichat authored
In Chromium OS kernel builds, we split the debug information as .ko.debug files, and that's what decode_stacktrace.sh needs to use. Relax objfile matching rule to allow any .ko* file to be matched. [drinkcat@chromium.org: add quotes around name pattern] Link: http://lkml.kernel.org/r/20190528103346.42720-1-drinkcat@chromium.org Link: http://lkml.kernel.org/r/20190521234148.64060-1-drinkcat@chromium.orgSigned-off-by:
Nicolas Boichat <drinkcat@chromium.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Nicolas Boichat authored
The basepath may contain special characters, which would confuse the regex matcher. ${var#prefix} does the right thing. Link: http://lkml.kernel.org/r/20190518055946.181563-1-drinkcat@chromium.org Fixes: 67a28de4 ("scripts/decode_stacktrace: only strip base path when a prefix of the path") Signed-off-by:Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Qian Cai authored
There are a few macros in IOMMU have single-char identifiers make the code hard to read and debug. Replace them with meaningful names. Link: http://lkml.kernel.org/r/1559566783-13627-1-git-send-email-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Suggested-by:
-
Ryusuke Konishi authored
Change my email since lab.ntt.co.jp email domain has been deprecated due to company policy. Link: http://lkml.kernel.org/r/1562495153-8166-1-git-send-email-konishi.ryusuke@gmail.comSigned-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by:
-
