- 21 Mar, 2014 5 commits
-
-
Horia Geanta authored
Commit 61bb86bb ("crypto: caam - set descriptor sharing type to SERIAL") changed the descriptor sharing mode from SHARE_WAIT to SHARE_SERIAL. All descriptor commands that handle the "ok to share" and "error propagation" settings should also go away, since they have no meaning for SHARE_SERIAL. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Marek Vasut authored
The ahash_def_finup() can make use of the request save/restore functions, thus make it so. This simplifies the code a little and unifies the code paths. Note that the same remark about free()ing the req->priv applies here, the req->priv can only be free()'d after the original request was restored. Finally, squash a bug in the invocation of completion in the ASYNC path. In both ahash_def_finup_done{1,2}, the function areq->base.complete(X, err); was called with X=areq->base.data . This is incorrect , as X=&areq->base is the correct value. By analysis of the data structures, we see the areq is of type 'struct ahash_request' , areq->base is of type 'struct crypto_async_request' and areq->base.completion is of type crypto_completion_t, which is defined in include/linux/crypto.h as: typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err); This is one lead that the X should be &areq->base . Next up, we can inspect other code which calls the completion callback to give us kind-of statistical idea of how this callback is used. We can try: $ git grep base\.complete\( drivers/crypto/ Finally, by inspecting ahash_request_set_callback() implementation defined in include/crypto/hash.h , we observe that the .data entry of 'struct crypto_async_request' is intended for arbitrary data, not for completion argument. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Marek Vasut authored
The functions to save original request within a newly adjusted request and it's counterpart to restore the original request can be re-used by more code in the crypto/ahash.c file. Pull these functions out from the code so they're available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Marek Vasut authored
Add documentation for the pointer voodoo that is happening in crypto/ahash.c in ahash_op_unaligned(). This code is quite confusing, so add a beefy chunk of documentation. Moreover, make sure the mangled request is completely restored after finishing this unaligned operation. This means restoring all of .result, .base.data and .base.complete . Also, remove the crypto_completion_t complete = ... line present in the ahash_op_unaligned_done() function. This type actually declares a function pointer, which is very confusing. Finally, yet very important nonetheless, make sure the req->priv is free()'d only after the original request is restored in ahash_op_unaligned_done(). The req->priv data must not be free()'d before that in ahash_op_unaligned_finish(), since we would be accessing previously free()'d data in ahash_op_unaligned_done() and cause corruption. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
Found by the kbuild test robot, the first argument to caam_init_rng has a spurious ampersand. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 10 Mar, 2014 18 commits
-
-
Joel Fernandes authored
HIGHMEM pages may not be mapped so we must kmap them before accessing. This resolves a random OOPs error that was showing up during OpenSSL SHA tests. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nitesh Lal authored
This patch allocates memory from DMAable region to the caam_rng_ctx object, earlier it had been statically allocated which resulted in errorneous behaviour on inserting the caamrng module at the runtime. Signed-off-by: Nitesh Lal <NiteshNarayanLal@freescale.com> Acked-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This adds the function blkcipher_aead_walk_virt_block, which allows the caller to use the blkcipher walk API to handle the input and output scatterlists. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Kees Cook authored
When bringing a new RNG source online, it seems like it would make sense to use some of its bytes to make the system entropy pool more random, as done with all sorts of other devices that contain per-device or per-boot differences. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Marek Vasut authored
Optimize the hashing operation in the MXS-DCP by doing two adjustments: 1) Given that the output buffer for the hash is now always correctly aligned, we can just use the buffer for the DCP DMA to store the resulting hash. We thus get rid of one copying of data. Moreover, we remove an entry from dcp_coherent_block{} and thus lower the memory footprint of the driver. 2) We map the output buffer for the hash for DMA only in case we will output the hash, not always, as it was now. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Marek Vasut authored
The DCP needs the bounce buffers, DMA descriptors and result buffers aligned to 64 bytes (yet another hardware limitation). Make sure they are aligned by properly aligning the structure which contains them during allocation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Make omap_des_copy_needed(), omap_des_copy_sgs(), because these functions are used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Sonic Zhang authored
1) SSYNC instruction is blackfin specific and takes no effect in this driver. 2) DMA descriptor and SG middle buffer are in DMA coherent memory. No need to flush. 3) Turn kzalloc, ioremap and request_irq into managed device APIs respectively. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Alexander Shiyan authored
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 26 Feb, 2014 14 commits
-
-
Tom Lendacky authored
When the crypto layer is able to queue up a command for processing by the CCP on the initial call to ccp_crypto_enqueue_request and the CCP returns -EBUSY, then if the backlog flag is not set the command needs to be freed and not added to the active command list. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tom Lendacky authored
Invoke the callback routine associated with the crypto context if an error is encountered sending the command to the CCP during backlog processing. This is needed to free any resources used by the command. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tom Lendacky authored
If a CCP command has been queued for processing at the crypto layer then, when dequeueing it for processing, the "can backlog" flag must be set so that the request isn't lost if the CCP backlog queue limit is reached. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dan Carpenter authored
My guess is that this little endian configuration is never found in real life, but if it were then the writel() arguments are in the wrong order so the driver would crash immediately. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephen Warren authored
This driver has never been hooked up in any board file, and cannot be instantiated via device tree. I've been told that, at least on Tegra20, the HW is slower at crypto than the main CPU. I have no test-case for it. Hence, remove it. Cc: Varun Wadekar <vwadekar@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Joel Fernandes authored
Add config and build options for the omap-des driver. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Joel Fernandes authored
Add omap-des driver with platform data for OMAP4/AM43xx. Support added for DES ECB and CBC modes. Also add support for 3DES operation where 3 64-bit keys are used to perform a DES encrypt-decrypt-encrypt (des3_ede) operation on a buffer. Tests have been conducted with the CRYPTO test manager, and functionality is verified at different page length alignments. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Fabio Estevam authored
We should test the error case for each platform_get_irq() assignment and propagate the error accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dan Carpenter authored
We checked "nbytes < bsize" before so it can't happen here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: Johannes Götzfried <johannes.goetzfried@cs.fau.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jingoo Han authored
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 25 Feb, 2014 1 commit
-
-
Tim Chen authored
We added the soft module dependency of crc32c module alias to generic crc32c module so other hardware accelerated crc32c modules could get loaded and used before the generic version. We also renamed the crypto/crc32c.c containing the generic crc32c crypto computation to crypto/crc32c_generic.c according to convention. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 09 Feb, 2014 2 commits
-
-
Alex Porosanu authored
SEC ERA has to be retrieved by reading the "fsl,sec-era" property from the device tree. This property is updated/filled in by u-boot. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dan Carpenter authored
My static checker complains that: drivers/char/hw_random/core.c:341 hwrng_register() warn: we tested 'old_rng' before and it was 'false' The problem is that sometimes we test "if (!old_rng)" and sometimes we test "if (must_register_misc)". The static checker knows they are equivalent but a human being reading the code could easily be confused. I have simplified the code by removing the "must_register_misc" variable and I have removed the redundant check on "if (!old_rng)". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-