Mark guest pages as accessed when removed from the shadow page tables for
better lru processing.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

mmio was already handled in kvm_arch_vcpu_ioctl_run(), so no need to check
again.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Current implementation is to toggle, which is incorrect.  Patch ported from
corresponding Xen code.
Signed-off-by: Avi Kivity <avi@qumranet.com>

cmps and scas instructions accept repeat prefixes F3 and F2. So in
order to emulate those prefixed instructions we need to be able to know
if prefixes are REP/REPE/REPZ or REPNE/REPNZ. Currently kvm doesn't make
this distinction. This patch introduces this distinction.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Non-x86 archs don't need this mechanism. Move it to arch, and
keep its interface in common.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

The state of SECONDARY_VM_EXEC_CONTROL shouldn't depend on in-kernel IRQ chip,
this patch fix this.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

The current cpuid management suffers from several problems, which inhibit
passing through the host feature set to the guest:

 - No way to tell which features the host supports

  While some features can be supported with no changes to kvm, others
  need explicit support.  That means kvm needs to vet the feature set
  before it is passed to the guest.

 - No support for indexed or stateful cpuid entries

  Some cpuid entries depend on ecx as well as on eax, or on internal
  state in the processor (running cpuid multiple times with the same
  input returns different output).  The current cpuid machinery only
  supports keying on eax.

 - No support for save/restore/migrate

  The internal state above needs to be exposed to userspace so it can
  be saved or migrated.

This patch adds extended cpuid support by means of three new ioctls:

 - KVM_GET_SUPPORTED_CPUID: get all cpuid entries the host (and kvm)
   supports

 - KVM_SET_CPUID2: sets the vcpu's cpuid table

 - KVM_GET_CPUID2: gets the vcpu's cpuid table, including hidden state

[avi: fix original KVM_SET_CPUID not removing nx on non-nx hosts as it did
      before]
Signed-off-by: Dan Kenigsberg <danken@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

We don't want the meaning of guest userspace changing under our feet.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Rename the awkwardly named variable.
Signed-off-by: Avi Kivity <avi@qumranet.com>

These are traditionally named 'page', but even more traditionally, that name
is reserved for variables that point to a 'struct page'.  Rename them to 'sp'
(for "shadow page").
Signed-off-by: Avi Kivity <avi@qumranet.com>

Converting last uses along the way.
Signed-off-by: Avi Kivity <avi@qumranet.com>

No longer used.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of passing an hpa, pass a regular struct page.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Converting a frame number to an address is tricky since the data type changes
size.  Introduce a function to do it.  This fixes an actual bug when
accessing guest ptes.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

Since set_pte() is now the only caller of set_pte_common(), merge the two
functions.
Signed-off-by: Avi Kivity <avi@qumranet.com>

It is now identical to set_pte().
Signed-off-by: Avi Kivity <avi@qumranet.com>

Similar information is available in the gfn parameter, so use that.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of repretitively open-coding this.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

If the guest requests just a tlb flush, don't take the vm lock and
drop the mmu context pointlessly.
Signed-off-by: Avi Kivity <avi@qumranet.com>

If all we're doing is increasing permissions on a pte (typical for demand
paging), then there's not need to flush remote tlbs.  Worst case they'll
get a spurious page fault.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

I spent an hour worrying why I see so many guest page faults on FC6 i386.
Turns out bypass wasn't implemented for nonpae.  Implement it so it doesn't
happen again.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Split kvm_arch_vcpu_create() into kvm_arch_vcpu_create() and
kvm_arch_vcpu_setup(), enabling preemption notification between the two.
This mean that we can now do vcpu_load() within kvm_arch_vcpu_setup().
Signed-off-by: Avi Kivity <avi@qumranet.com>

Moving !user_alloc case to kvm_arch to avoid unnecessary
code logic in non-x86 platform.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of incrementally changing the mmu cache size for every memory slot
operation, recalculate it from scratch.  This is simpler and safer.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of fetching one byte at a time, prefetch 15 bytes (or until the next
page boundary) to avoid guest page table walks.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Theoretically used to acccess memory known to be ordinary RAM, it was
never implemented.  It is questionable whether it is possible to implement
it correctly.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Improve dirty bit setting for pages that kvm release, until now every page
that we released we marked dirty, from now only pages that have potential
to get dirty we mark dirty.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

When we map a page, we check whether some other vcpu mapped it for us and if
so, bail out.  But we should decrease the refcount on the page as we do so.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch moves structures:
	kvm_cpuid_entry
	kvm_cpuid

from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Move structures:
	kvm_sregs
	kvm_msr_entry
	kvm_msrs
	kvm_msr_list

from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch moves structures:
	kvm_segment
	kvm_dtable
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch moves structure lapic_state from include/linux/kvm.h
to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch moves structure kvm_regs to include/asm-x86/kvm.h.
Each architecture will need to create there own version of this
structure.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch moves structures:
	kvm_pic_state
	kvm_ioapic_state

to inclue/asm-x86/kvm.h.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch moves sturct kvm_memory_alias from include/linux/kvm.h
to include/asm-x86/kvm.h. Also have include/linux/kvm.h include
include/asm/kvm.h.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>