- 04 Jan, 2024 27 commits
-
-
Jiawen Wu authored
Convert txgbe to use phylink and phylink_config added in libwx. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiawen Wu authored
For the following implementation, add struct phylink and phylink_config to wx structure. Add the helper function for converting phylink to wx, implement ethtool ksetting and nway reset in libwx. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller authored
t-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-02 (ice) This series contains updates to ice driver only. Karol adds support for capable devices to receive timestamp via interrupt rather than polling to allow for less delay. Andrii adds support switchdev hardware packet mirroring. Jake reworks VF rebuild to avoid destroying objects that do not need to be. Jan S removes reporting of rx_len_errors as they are incorrectly reported by hardware. Jan G adds const modifier to some uses that are applicable. Kunwu Chan adds some checks for failed memory allocations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Busy polling while holding the socket lock makes litle sense, because incoming packets wont reach our receive queue. Fixes: 8465a5fc ("sctp: add support for busy polling to sctp protocol") Reported-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mina Almasry authored
Minor fix for kcm: code wanting to access the fields inside an skb frag should use the skb_frag_*() helpers, instead of accessing the fields directly. Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://lore.kernel.org/r/20240102205959.794513-1-almasrymina@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Mina Almasry authored
Minor fix for virtio: code wanting to access the fields inside an skb frag should use the skb_frag_*() helpers, instead of accessing the fields directly. This allows for extensions where the underlying memory is not a page. Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://lore.kernel.org/r/20240102205905.793738-1-almasrymina@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pedro Tammela authored
Implement conditional netlink notifications for Qdiscs and classes, which were missing in the initial patches that targeted tc filters and actions. Notifications will only be built after passing a check for 'rtnl_notify_needed()'. For both Qdiscs and classes 'get' operations now call a dedicated notification function as it was not possible to distinguish between 'create' and 'get' before. This distinction is necessary because 'get' always send a notification. Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20231229132642.1489088-2-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pedro Tammela authored
Bound actions always return '0' and as of today we rely on '0' being returned in order to properly skip bound actions in tcf_idr_insert_many. In order to further improve maintainability, introduce the ACT_P_BOUND return code. Actions are updated to return 'ACT_P_BOUND' instead of plain '0'. tcf_idr_insert_many is then updated to check for 'ACT_P_BOUND'. Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20231229132642.1489088-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
xdp_prog is used in receive path, both from XDP enabled drivers and from netif_elide_gro(). This patch also removes two 4-bytes holes. Fixes: 43a71cd6 ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240102162220.750823-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-02 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Ovidiu Panait adds reporting of VF link state to ixgbe. Jedrzej removes uses of IXGBE_ERR* codes to instead use standard error codes. Andrii modifies behavior of VF disable to properly shut down queues on i40e. Simon Horman removes, undesired, use of comma operator for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: Avoid unnecessary use of comma operator i40e: Fix VF disable behavior to block all traffic ixgbe: Refactor returning internal error codes ixgbe: Refactor overtemp event handling ixgbe: report link state for VF devices ==================== Link: https://lore.kernel.org/r/20240102222429.699129-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
David Arinzon says: ==================== ENA driver XDP changes This patchset contains multiple XDP-related changes in the ENA driver, including moving the XDP code to dedicated files. ==================== Link: https://lore.kernel.org/r/20240101190855.18739-1-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
Queue stats using ifconfig and ip are retrieved via ena_get_stats64(). This function currently does not take the xdp sent or dropped packets stats into account. This commit adds the following xdp stats to ena_get_stats64(): tx bytes sent tx packets sent rx dropped packets Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-12-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
Also shorten comment related to it. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-11-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
The RX queue info contains information about the RX queue which might be relevant to the kernel. To avoid configuring this queue for different scenarios, this patch moves the RX queue configuration to ena_up()/ena_down() function and makes it configured every interface state toggle. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-10-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
Used for better readability and debugging of XDP flow. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-9-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
This patch focuses on changes to the XDP part of the napi polling routine. 1. Update the `napi_comp` stat only when napi is actually complete. 2. Simplify the code by using a function pointer to the right napi routine (XDP vs non-XDP path) 3. Remove unnecessary local variables. 4. Adjust a debug print to show the processed XDP frame index rather than the pointer. Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-8-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
This check is already done in ena_clean_rx_irq() which indirectly calls it. This function is called in napi context and the driver doesn't allow to change the XDP program without performing destruction and reinitialization of napi context (part of ena_down/ena_up sequence). Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-7-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
When an XDP program is loaded the existing channels in the driver split into two halves: - The first half of the channels contain RX and TX rings, these queues are used for receiving traffic and sending packets originating from kernel. - The second half of the channels contain only a TX ring. These queues are used for sending packets that were redirected using XDP_TX or XDP_REDIRECT. Referring to the queues in the second half of the channels as "xdp_ring" can be confusing and may give the impression that ENA has the capability to generate an additional special queue. This patch ensures that the xdp_ring field is exclusively used to describe the XDP TX queue that a specific RX queue needs to utilize when forwarding packets with XDP TX and XDP REDIRECT, preserving the integrity of the xdp_ring field in ena_ring. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-6-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
To avoid de-referencing skb or xdp_frame when we poll for TX completion (where they might not be in the cache), save the total TX packet size in the ena_tx_buffer object representing the packet. Also the 'print_once' field's type was changed from u32 to u8 to allow adding the 'total_tx_size' without changing the total size of the struct. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-5-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
The skb and xdpf pointers cannot be set together in the driver (each TX descriptor can send either an SKB or an XDP frame), and so it makes more sense to put them both in a union. This decreases the overall size of the ena_tx_buffer struct which improves cache locality. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-4-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
This change will enable the ability to use ena_xmit_common() in functions that don't have a net_device pointer. While it can be retrieved by dereferencing ena_adapter (adapter->netdev), there's no reason to do it in fast path code where this pointer is only needed for debug prints. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-3-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Arinzon authored
XDP system has a very large footprint in the driver's overall code. makes the whole driver's code much harder to read. Moving XDP code to dedicated files. This patch doesn't make any changes to the code itself and only cut-pastes the code into ena_xdp.c and ena_xdp.h files so the change is purely cosmetic. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-2-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Suman Ghosh authored
As of today, the last MCAM entry was not getting allocated because of a <= check with the max_bmap count. This patch modifies that and if the requested entry is greater than the available entries then set it to the max value. Signed-off-by: Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20240101145042.419697-1-sumang@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yujie Liu authored
The patch set [1] added a general lib.sh in net selftests, and converted several test scripts to source the lib.sh. unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2]) have a /bin/sh shebang which may point to various shells in different distributions, but "source" is only available in some of them. For example, "source" is a built-it function in bash, but it cannot be used in dash. Refer to other scripts that were converted together, simply change the shebang to bash to fix the following issues when the default /bin/sh points to other shells. not ok 51 selftests: net: unicast_extensions.sh # exit=1 v1 -> v2: - Fix pmtu.sh which has the same issue as unicast_extensions.sh, suggested by Hangbin - Change the style of the "source" line to be consistent with other tests, suggested by Hangbin Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1] Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2] Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 378f082e ("selftests/net: convert pmtu.sh to run it in unique namespace") Fixes: 0f4765d0 ("selftests/net: convert unicast_extensions.sh to run it in unique namespace") Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhengchao Shao authored
When fib_default_rule_add is invoked, the value of the input parameter 'flags' is always 0. Rules uses kzalloc to allocate memory, so 'flags' has been initialized to 0. Therefore, remove the input parameter 'flags' in fib_default_rule_add. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240102071519.3781384-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marcin Wojtas authored
Update the port's device structure also with its fwnode pointer with a recommended device_set_node() helper routine. Signed-off-by: Marcin Wojtas <marcin.s.wojtas@gmail.com> Reviewed-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20231231122019.123344-1-marcin.s.wojtas@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ilpo Järvinen authored
Instead of open coding, use IS_ALIGNED() and ALIGN_DOWN() when dealing with alignment. Replace also literals with SZ_4K. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20231229145232.6163-1-ilpo.jarvinen@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 03 Jan, 2024 6 commits
-
-
Lin Ma authored
In function `tc_dump_tfilter`, the attributes array is parsed via tcf_tfilter_dump_policy which only describes TCA_DUMP_FLAGS. However, the NLA TCA_CHAIN is also accessed with `nla_get_u32`. The access to TCA_CHAIN is introduced in commit 5bc17018 ("net: sched: introduce multichain support for filters") and no nla_policy is provided for parsing at that point. Later on, tcf_tfilter_dump_policy is introduced in commit f8ab1807 ("net: sched: introduce terse dump flag") while still ignoring the fact that TCA_CHAIN needs a check. This patch does that by complementing the policy to allow the access discussed here can be safe as other cases just choose rtm_tca_policy as the parsing policy. Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
liyouhong authored
Fix spelling typo in comment Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: liyouhong <liyouhong@kylinos.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231227015831.289077-1-liyouhong@kylinos.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gerhard Engleder authored
Commit 13e59344 ("net: ethtool: add support for symmetric-xor RSS hash") adds a check to the ethtool set_rxnfc operation, which checks the RX flow hash if the flag RXH_XFRM_SYM_XOR is set. This flag is introduced with the same commit. It calls the ethtool get_rxfh operation to get the RX flow hash data. If get_rxfh is not supported, then EOPNOTSUPP is returned. There are driver like tsnep, macb, asp2, genet, gianfar, mtk, ... which support the ethtool operation set_rxnfc but not get_rxfh. This results in EOPNOTSUPP returned by ethtool_set_rxnfc() without actually calling the ethtool operation set_rxnfc. Thus, set_rxnfc got broken for all these drivers. Check RX flow hash in ethtool_set_rxnfc() only if driver supports RX flow hash. Fixes: 13e59344 ("net: ethtool: add support for symmetric-xor RSS hash") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Link: https://lore.kernel.org/r/20231226205536.32003-1-gerhard@engleder-embedded.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Ahmed Zaki says: ==================== Bug fixes for RSS symmetric-xor A couple of fixes for the symmetric-xor recently merged in net-next [1]. The first patch copies the xfrm value back to user-space when ethtool is built with --disable-netlink. The second allows ethtool to change other RSS attributes while not changing the xfrm values. Link: https://lore.kernel.org/netdev/20231213003321.605376-1-ahmed.zaki@intel.com/ [1] ==================== Link: https://lore.kernel.org/r/20231221184235.9192-1-ahmed.zaki@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ahmed Zaki authored
Add a NO_CHANGE uAPI value for the new RXFH/RSS input_xfrm uAPI field. This needed so that user-space can set other RSS values (hkey or indir table) without affecting input_xfrm. Should have been part of [1]. Link: https://lore.kernel.org/netdev/20231213003321.605376-1-ahmed.zaki@intel.com/ [1] Fixes: 13e59344 ("net: ethtool: add support for symmetric-xor RSS hash") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231221184235.9192-3-ahmed.zaki@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ahmed Zaki authored
The ioctl path of ethtool's get channels is missing the final step of copying the new input_xfrm field to user-space. This should have been part of [1]. Link: https://lore.kernel.org/netdev/20231213003321.605376-1-ahmed.zaki@intel.com/ [1] Fixes: 13e59344 ("net: ethtool: add support for symmetric-xor RSS hash") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231221184235.9192-2-ahmed.zaki@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 02 Jan, 2024 7 commits
-
-
Vladimir Oltean authored
The ice driver fails to build when CONFIG_XDP_SOCKETS is disabled. drivers/net/ethernet/intel/ice/ice_base.c:533:21: error: variable has incomplete type 'struct xsk_cb_desc' struct xsk_cb_desc desc = {}; ^ include/net/xsk_buff_pool.h:15:8: note: forward declaration of 'struct xsk_cb_desc' struct xsk_cb_desc; ^ Fixes: d68d707d ("ice: Support XDP hints in AF_XDP ZC mode") Closes: https://lore.kernel.org/netdev/8b76dad3-8847-475b-aa17-613c9c978f7a@infradead.org/Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20231219110205.1289506-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
This reverts commit cff9c565. Revert based on feedback from Russell. Link: https://lore.kernel.org/all/ZZPtUIRerqTI2%2Fyh@shell.armlinux.org.uk/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Claudiu Beznea says: ==================== renesas: rzg3s: Add support for Ethernet Series adds Ethernet support for Renesas RZ/G3S. Along with it preparatory cleanups and fixes were included. ==================== Link: https://lore.kernel.org/r/20231207070700.4156557-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Claudiu Beznea authored
Document Ethernet RZ/G3S support. Ethernet IP is similar to the one available on RZ/G2L devices. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
Although it does not seem to have any untoward side-effects, the use of ';' to separate to assignments seems more appropriate than ','. Flagged by clang-17 -Wcomma No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Andrii Staikov authored
Currently, if a VF is disabled using the 'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still able to receive traffic. Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable' to completely shutdown the VF's queues making it entirely disabled and not able to receive or send any traffic. Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable' command to make a VF do reinitialization bringing the queues back up. Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jedrzej Jagielski authored
Change returning codes to the kernel ones instead of the internal ones for the entire ixgbe driver. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-