- 25 Jul, 2022 38 commits
-
-
Rajneesh Bhardwaj authored
This simplifies existing coherence handling for Arcturus and Aldabaran to account for !coherent && uncached scenarios. Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Chengming Gui authored
Support {GLOBAL/SE0/SE1/SE2/SE3}_TAP_DELAYS uploading. v2: upload TAP_DELAYS before RLC autoload was triggered. (Hawking) Signed-off-by:Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Evan Quan authored
The current approach breaks S3/S4 as asic reset is needed for them. And putting SMU out of service(via SMU_MSG_PrepareMp1ForUnload) will make that(asic reset) failed. Considering with current designs, there is actually also asic reset involved on driver reloading. That can make asic back to a clean state. So, the SMU_MSG_PrepareMp1ForUnload operation will be not so necessary. Thus we will just drop the SMU_MSG_PrepareMp1ForUnload operation. We may revise the whole driver reloading sequences when there is a better design. Fixes: 72aeb6ee ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13") Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Only PP_MP1_STATE_UNLOAD is supported for now. For other mp1 state, we should just ignore it. Otherwise, there will be errors coming out. Signed-off-by:
-
Evan Quan authored
To fit the latest 78.49.0 PMFW. Also, bump the version to 0x2B. Signed-off-by:
-
Evan Quan authored
The feature is ready with latest firmwares. Signed-off-by:
-
Kenneth Feng authored
update driver if header for smu_13_0_7 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Acked-by:
-
Rodrigo Siqueira authored
The function dcn32_predict_pipe_split uses FPU operations. This commit moves this function to the dcn32_fpu file, and we ensure that we only invoke it under the kernel_fpu protection. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
YiPeng Chai authored
Add ras eeprom i2c function for smu13 v13_0_0. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Acked-by:
-
Leo Li authored
[Why & How] It's useful to disable MPO when debugging or testing. Therefore, add a dcdebugmask option to disable MPO. Signed-off-by:
Leo Li <sunpeng.li@amd.com> Reviewed-by:
-
Leo Li authored
[Why] Being able to configure visual confirm at boot or in cmdline is helpful when debugging. [How] Add a module parameter to configure DC visual confirm, which works the same way as the equivalent debugfs entry. Signed-off-by:
-
Rodrigo Siqueira authored
The function dcn32_helper_populate_phantom_dlg_params uses FPU operations. For this reason, this commit moves this function to the dcn32_fpu file, and we ensure that we only invoke it under the kernel_fpu protection. Tested-by:
-
Alex Deucher authored
So userspace knows when it is available. Proposed mesa patch: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075Reviewed-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Alex Deucher authored
Use the former pad element to store the IP versions from the IP discovery table. This allows userspace to get the IP version from the kernel to better align with hardware IP versions. Proposed mesa patch: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075Reviewed-by:
-
Rodrigo Siqueira authored
We are working to isolate FPU operations inside the DML folder, and the file dcn32_clk_mgr has some of these operations. This commit moves the FPU operations inside the clock manager and creates the dcn32_fpu file to aggregate those operations. Note that there is no functional change ere, just moving code from one part to another. Tested-by:
-
Aurabindo Pillai authored
This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64. Idle optimization was disabled due to SMU and firmware bugs. Enable it back for DCN32. DCN321 has them enabled already Fixes: 6a640b95 ("drm/amd/display: disable idle optimizations") Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-and-tested-by:
-
Jun Lei authored
[why] Unbounded request logic in resource/DML has some issues where unbounded request is being enabled incorrectly. SW today enables unbounded request unconditionally in hardware, on the assumption that HW can always support it in single pipe scenarios. This worked until now because the same assumption is made in DML. A new DML update is needed to fix a bug, where there are single pipe scenarios where unbounded cannot be enabled, and this change in DML needs to be ported in, and dcn32 resource logic fixed. [how] First, dcn32_resource should program unbounded req in HW according to unbounded req enablement output from DML, as opposed to DML input. Second, port in DML update which disables unbounded req in some scenarios to fix an issue with poor stutter performance Tested-by:
Jun Lei <jun.lei@amd.com> Signed-off-by:
-
Chris Park authored
[Why] Cursor size can update without MALL cache update. Update the register on cursor attribute as well. [How] Update cursor MALL cache on cursor attribute update. Tested-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Alan Liu <HaoPing.Liu@amd.com> Signed-off-by:
Chris Park <chris.park@amd.com> Signed-off-by:
-
Jason Wang authored
The double `to' is duplicated in the comment, remove one. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Jason Wang authored
The double `have' is duplicated in line 696, remove one. Reviewed-by:
-
Roman Li authored
Adding dm ip block to enable display on dcn 3.1.4. Signed-off-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
-
Roman Li authored
[Why] DCN 3.1.4 uses dmub not dmcu. Attempt to identify dmcu firmware for dcn314 results in dm init error: "Unsupported ASIC type" [How] Add dcn314 to the list of asics that don't require dmcu Signed-off-by:
-
Taimur Hassan authored
[Why & How] There are cases where the pipes populated are not all at the top of the pipes list under context. Loop through all pipes for DET allocation instead of just the number of populated ones, even if some unpopulated pipes are iterated through unnecessarily. Tested-by:
Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by:
-
Vladimir Stempen authored
[Why] VM enabled in IP configuration causes UCLK not reaching DPM0. The expectation for VM enable should be that KMD will indicate to DAL when VM is enabled, then DAL will set the bit accordingly [How] Set gpuvm_enable to zero in DCN3_20 and DCN3_21 resource. Tested-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Vladimir Stempen <vladimir.stempen@amd.com> Signed-off-by:
-
André Almeida authored
Add a GFXOFF section at "GPU Power Controls" file, explaining what it is and how userspace can interact with it. v2: minor tweaks to the documenation (Alex) Signed-off-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
-
André Almeida authored
GFXOFF has two different "state" values: one to define if the GPU is allowed/disallowed to enter GFXOFF, usually called state; and another one to define if currently GFXOFF is being used, usually called status. Even when GFXOFF is allowed, GPU firmware can decide to not used it accordingly to the GPU load. Userspace can allow/disallow GPUs to enter into GFXOFF via debugfs. The kernel maintains a counter of requests for GFXOFF (gfx_off_req_count) that should be decreased to allow GFXOFF and increased to disallow. The issue with this interface is that userspace can't be sure if GFXOFF is currently allowed. Even by checking amdgpu_gfxoff file, one might get an ambiguous 2, that means that GPU is currently out of GFXOFF, but that can be either because it's currently disallowed or because it's allowed but given the current GPU load it's enabled. Then, userspace needs to rely on the fact that GFXOFF is enabled by default on boot and to track this information. To make userspace life easier and GFXOFF more reliable, return the current state of GFXOFF to userspace when reading amdgpu_gfxoff with the same semantics of writing: 0 means not allowed, not 0 means allowed. Expose the current status of GFXOFF through a new file, amdgpu_gfxoff_status. Signed-off-by:
-
Melissa Wen authored
Although dcn31_update_soc_for_wm_a() is only called in dml/dcn31/dcn31_fpu by dc->res_pool->funcs->update_soc_for_wm_a(dc, context), it's declared in dcn31_resource that is not FPU protected. Move this function to dcn31_fpu file as part of the work to isolate FPU code. Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Maíra Canal authored
Remove the variable MaxUsedBW from the function DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation. As a side-effect, the variables MaxPerPlaneVActiveWRBandwidth and WRBandwidth are also removed. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3043:10: warning: variable 'MaxUsedBW' set but not used [-Wunused-but-set-variable] double MaxUsedBW = 0; ^ 1 warning generated. Reviewed-by:Maíra Canal <mairacanal@riseup.net> Signed-off-by:
-
Maíra Canal authored
The variable regval from the function enc1_update_generic_info_packet and the variables dynamic_range_rgb and dynamic_range_ycbcr from the function enc1_stream_encoder_dp_set_stream_attribute are not currently used. This was pointed by clang with the following warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:62:11: warning: variable 'regval' set but not used [-Wunused-but-set-variable] uint32_t regval; ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:262:10: warning: variable 'dynamic_range_rgb' set but not used [-Wunused-but-set-variable] uint8_t dynamic_range_rgb = 0; /*full range*/ ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:263:10: warning: variable 'dynamic_range_ycbcr' set but not used [-Wunused-but-set-variable] uint8_t dynamic_range_ycbcr = 1; /*bt709*/ ^ 3 warnings generated. Reviewed-by: -
Maíra Canal authored
Remove the variables dispclk_delay_subtotal and dppclk_delay_subtotal from the function dml_rq_dlg_get_dlg_params. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:920:15: warning: variable 'dispclk_delay_subtotal' set but not used [-Wunused-but-set-variable] unsigned int dispclk_delay_subtotal; ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:919:15: warning: variable 'dppclk_delay_subtotal' set but not used [-Wunused-but-set-variable] unsigned int dppclk_delay_subtotal; ^ 2 warnings generated. Reviewed-by: -
Maíra Canal authored
Remove the unused unsigned int NumberOfStates from the file, which was declared but never hooked up. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:33:27: warning: unused variable 'NumberOfStates' [-Wunused-const-variable] static const unsigned int NumberOfStates = DC__VOLTAGE_STATES; ^ 1 warning generated. Reviewed-by: -
Maíra Canal authored
Remove dml32_CalculatedoublePipeDPPCLKAndSCLThroughput function, which is not used in the codebase. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:6: warning: no previous prototype for function 'dml32_CalculatedoublePipeDPPCLKAndSCLThroughput' [-Wmissing-prototypes] void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput( ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput( ^ static 1 warning generated. Reviewed-by: -
Maíra Canal authored
Remove the variable clk_src from the function dcn3_get_pix_clk_dividers. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1279:25: warning: variable 'clk_src' set but not used [-Wunused-but-set-variable] struct dce110_clk_src *clk_src; ^ 1 warning generated. Reviewed-by: -
Taimur Hassan authored
[Why] For certain MPO configurations, DML will split a pipe after DET buffer has already been allocated by driver, resulting in allocation of more DET segments than the configurable return buffer has, causing underflow. [How] Determine during DET override calculation whether or not a pipe will be split later on by DML, and distribute DET segments based on expected number of pipes. Tested-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Alvin Lee authored
[Description] In general cases we want to keep the dram clock change requirement (we prefer configs that support MCLK switch). Only override to false for SubVP. Tested-by:
-
Rodrigo Siqueira authored
We want to calculate the DTB clock values when DSC is enabled; however, this is not the current behavior implemented in DCN32. Right now, DML is trying to calculate DSC values even if DSC is disabled; as a result, we can have a hard hang due to wrong clock calculation. This commit fixes this issue by moving the calculation after the DSC check. Tested-by:
-
Wenjing Liu authored
[why] Number of DSC slices is an input to DML with high dependency on display specific capability. This isn't something DML can decide on its own. DML has to use the original number of DSC slices input to DML during validation without modification. Otherwise the computed DSC delay will not reflect the current configuration and therefore causes validation failures. [how] Remove DML override for number of DSC slices parameter. Tested-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
[Why] The amdgpu_dm file contains most of the code that works as an interface between DRM API and DC. As a result, this file becomes very large since it comprises multiple abstractions such as CRTC manipulation. [How] This commit extracts the CRTC code to its specific file named amdgpu_dm_crtc. This change does not change anything inside the functions; the only exception is converting some static functions to a global function. v2: fix ifdef merge mix up (Alex) Tested-by:
-
- 20 Jul, 2022 2 commits
-
-
Rodrigo Siqueira authored
[Why] The amdgpu_dm file contains most of the code that works as an interface between DRM API and DC. As a result, this file becomes very large since it comprises multiple abstractions such as plane manipulation. [How] This commit extracts the plane code to its specific file named amdgpu_dm_plane. This change does not change anything inside the functions; the only exception is converting some static functions to a global function. Tested-by:
-
Wayne Lin authored
[Why & How] In order to leverage igt tool to maintain mst feature, expose new debugfs entry "mst_progress_status". In our dm flow, record down the result of each phase of mst and user can examine the mst result by checking whether each phase get completed successfully. Tested-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
Wayne Lin <Wayne.Lin@amd.com> Signed-off-by:
-
