- 17 May, 2014 6 commits
-
-
Vlad Yasevich authored
Prior to commit fbd929f2 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vlad Yasevich says: ==================== Fix lockdep issues with stacked devices Recent commit dc8eaaa0 vlan: Fix lockdep warning when vlan dev handle notification attempted to solve lockdep issues with vlans where multiple vlans were stacked. However, the code does not work correctly when the vlan stack is interspersed with other devices in between the vlans. Additionally, similar lockdep issues show up with other devices. This series provides a generic way to solve these issue for any devices that can be stacked. It also addresses the concern for vlan and macvlan devices. I am not sure whether it makes sense to do so for other types like team, vxlan, and bond. Thanks -vlad Since v2: - Remove rcu variants from patch1, since that function is called only under rtnl. - Fix whitespace problems reported by checkpatch Since v1: - Fixed up a goofed-up rebase. * is_vlan_dev() should be bool and that change belongs in patch3. * patch4 should not have any vlan changes in it. ==================== Signed-off-by:
-
Vlad Yasevich authored
Macvlan devices try to avoid stacking, but that's not always successfull or even desired. As an example, the following configuration is perefectly legal and valid: eth0 <--- macvlan0 <---- vlan0.10 <--- macvlan1 However, this configuration produces the following lockdep trace: [ 115.620418] ====================================================== [ 115.620477] [ INFO: possible circular locking dependency detected ] [ 115.620516] 3.15.0-rc1+ #24 Not tainted [ 115.620540] ------------------------------------------------------- [ 115.620577] ip/1704 is trying to acquire lock: [ 115.620604] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.620686] but task is already holding lock: [ 115.620723] (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.620795] which lock already depends on the new lock. [ 115.620853] the existing dependency chain (in reverse order) is: [ 115.620894] -> #1 (&macvlan_netdev_addr_lock_key){+.....}: [ 115.620935] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.620974] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621019] [<ffffffffa07296c3>] vlan_dev_set_rx_mode+0x53/0x110 [8021q] [ 115.621066] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621105] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621143] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] -> #0 (&vlan_netdev_addr_lock_key/1){+.....}: [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] other info that might help us debug this: [ 115.621174] Possible unsafe locking scenario: [ 115.621174] CPU0 CPU1 [ 115.621174] ---- ---- [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] *** DEADLOCK *** [ 115.621174] 2 locks held by ip/1704: [ 115.621174] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815e6dbb>] rtnetlink_rcv+0x1b/0x40 [ 115.621174] #1: (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.621174] stack backtrace: [ 115.621174] CPU: 3 PID: 1704 Comm: ip Not tainted 3.15.0-rc1+ #24 [ 115.621174] Hardware name: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010 [ 115.621174] ffffffff82339ae0 ffff880465f79568 ffffffff816ee20c ffffffff82339ae0 [ 115.621174] ffff880465f795a8 ffffffff816e9e1b ffff880465f79600 ffff880465b019c8 [ 115.621174] 0000000000000001 0000000000000002 ffff880465b019c8 ffff880465b01230 [ 115.621174] Call Trace: [ 115.621174] [<ffffffff816ee20c>] dump_stack+0x4d/0x66 [ 115.621174] [<ffffffff816e9e1b>] print_circular_bug+0x200/0x20e [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d3172>] ? trace_hardirqs_on_caller+0xb2/0x1d0 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff811e1db1>] ? mem_cgroup_bad_page_check+0x21/0x30 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff810d394c>] ? __lock_acquire+0x37c/0x1a60 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815ea169>] ? rtnl_newlink+0xe9/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff810d329d>] ? trace_hardirqs_on+0xd/0x10 [ 115.621174] [<ffffffff815e6dbb>] ? rtnetlink_rcv+0x1b/0x40 [ 115.621174] [<ffffffff815e6de0>] ? rtnetlink_rcv+0x40/0x40 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff8119d4f8>] ? might_fault+0xa8/0xb0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff815cb51e>] ? verify_iovec+0x5e/0xe0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff816faa0d>] ? __do_page_fault+0x11d/0x570 [ 115.621174] [<ffffffff810cfe9f>] ? up_read+0x1f/0x40 [ 115.621174] [<ffffffff816fab04>] ? __do_page_fault+0x214/0x570 [ 115.621174] [<ffffffff8120a10b>] ? mntput_no_expire+0x6b/0x1c0 [ 115.621174] [<ffffffff8120a0b7>] ? mntput_no_expire+0x17/0x1c0 [ 115.621174] [<ffffffff8120a284>] ? mntput+0x24/0x40 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b Fix this by correctly providing macvlan lockdep class. Signed-off-by: -
Vlad Yasevich authored
This reverts commit dc8eaaa0. vlan: Fix lockdep warning when vlan dev handle notification Instead we use the new new API to find the lock subclass of our vlan device. This way we can support configurations where vlans are interspersed with other devices: bond -> vlan -> macvlan -> vlan Signed-off-by:
-
Vlad Yasevich authored
Currently netif_addr_lock_nested assumes that there can be only a single nesting level between 2 devices. However, if we have multiple devices of the same type stacked, this fails. For example: eth0 <-- vlan0.10 <-- vlan0.10.20 A more complicated configuration may stack more then one type of device in different order. Ex: eth0 <-- vlan0.10 <-- macvlan0 <-- vlan1.10.20 <-- macvlan1 This patch adds an ndo_* function that allows each stackable device to report its nesting level. If the device doesn't provide this function default subclass of 1 is used. Signed-off-by:
-
Vlad Yasevich authored
Multiple devices in the kernel can be stacked/nested and they need to know their nesting level for the purposes of lockdep. This patch provides a generic function that determines a nesting level of a particular device by its type (ex: vlan, macvlan, etc). We only care about nesting of the same type of devices. For example: eth0 <- vlan0.10 <- macvlan0 <- vlan1.20 The nesting level of vlan1.20 would be 1, since there is another vlan in the stack under it. Signed-off-by:
-
- 16 May, 2014 17 commits
-
-
Eric Dumazet authored
Starting from linux-3.13, GRO attempts to build full size skbs. Problem is the commit assumed one particular field in skb->cb[] was clean, but it is not the case on some stacked devices. Timo reported a crash in case traffic is decrypted before reaching a GRE device. Fix this by initializing NAPI_GRO_CB(skb)->last at the right place, this also removes one conditional. Thanks a lot to Timo for providing full reports and bisecting this. Fixes: 8a29111c ("net: gro: allow to build full sized skb") Bisected-by:
Timo Teras <timo.teras@iki.fi> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
Timo Teräs authored
The connected check fails to check for ip_gre nbma mode tunnels properly. ip_gre creates temporary tnl_params with daddr specified to pass-in the actual target on per-packet basis from neighbor layer. Detect these tunnels by inspecting the actual tunnel configuration. Minimal test case: ip route add 192.168.1.1/32 via 10.0.0.1 ip route add 192.168.1.2/32 via 10.0.0.2 ip tunnel add nbma0 mode gre key 1 tos c0 ip addr add 172.17.0.0/16 dev nbma0 ip link set nbma0 up ip neigh add 172.17.0.1 lladdr 192.168.1.1 dev nbma0 ip neigh add 172.17.0.2 lladdr 192.168.1.2 dev nbma0 ping 172.17.0.1 ping 172.17.0.2 The second ping should be going to 192.168.1.2 and head 10.0.0.2; but cached gre tunnel level route is used and it's actually going to 192.168.1.1 via 10.0.0.1. The lladdr's need to go to separate dst for the bug to trigger. Test case uses separate route entries, but this can also happen when the route entry is same: if there is a nexthop exception or the GRE tunnel is IPsec'ed in which case the dst points to xfrm bundle unique to the gre lladdr. Fixes: 7d442fab ("ipv4: Cache dst in tunnels") Signed-off-by:
-
Fabian Godehardt authored
Adding more than one chip on device-tree currently causes the probing routine to always use the first chips data pointer. Signed-off-by:
Fabian Godehardt <fg@emlix.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Lorenzo Colitti authored
Currently, "ip -6 route get mark xyz" ignores the mark passed in by userspace. Make it honour the mark, just like IPv4 does. Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Include changes: - fix NULL dereference in batadv_orig_hardif_seq_print_text() - fix reference counting imbalance when using fragmentation - avoid access to orig_node objects after they have been free'd - fix local TT check for outgoing arp requests in DAT
-
David Vrabel authored
When the NAPI budget was not all used, xenvif_poll() would call napi_complete() /after/ enabling the interrupt. This resulted in a race between the napi_complete() and the napi_schedule() in the interrupt handler. The use of local_irq_save/restore() avoided by race iff the handler is running on the same CPU but not if it was running on a different CPU. Fix this properly by calling napi_complete() before reenabling interrupts (in the xenvif_napi_schedule_or_enable_irq() call). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-05-15 Please pull this batch of fixes for the 3.15 stream... For the mac80211 bits, Johannes says: "One fix is to get better VHT performance and the other fixes tracing garbage or other potential issues with the interface name tracing." And... "This has a fix from Emmanuel for a problem I failed to fix - when association is in progress then it needs to be cancelled while suspending (I had fixed the same for authentication). Also included a fix from myself for a userspace API problem that hit the iw tool and a fix to the remain-on-channel framework." For the iwlwifi bits, Emmanuel says: "Alex fixes the scan by disabling the fragmented scan. David prevents scan offload while associated, the firmware seems not to like it. I fix a stupid bug I made in BT Coex, and fix a bad #ifdef clause in rate scaling. Along with that there is a fix for a NULL pointer exception that can happen if we load the driver and our ISR gets called because the interrupt line is shared. The fix has been tested by the reporter." And... "We have here a fix from David Spinadel that makes a previous fix more complete, and an off-by-one issue fixed by Eliad in the same area. I fix the monitor that broke on the way." Beyond that... Daniel Kim's one-liner fixes a brcmfmac regression caused by a typo in an earlier commit.. Rajkumar Manoharan fixes an ath9k oops reported by David Herrmann. ==================== Signed-off-by: -
Nathaniel W Filardo authored
There may be padding on the ticket contained in the key payload, so just ensure that the claimed token length is large enough, rather than exactly the right size. Signed-off-by:
Nathaniel Wesley Filardo <nwf@cs.jhu.edu> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Zhangfei Gao authored
With commit be9dad1f ("net: phy: suspend phydev when going to HALTED"), an unused PHY device will be put in a low-power mode using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start() and phy_stop() from ndo_open and ndo_close() respectively, while calling phy_connect() and phy_disconnect() from probe and remove. In such a case, the PHY will be powered down during the phy_stop() call, but will fail to be powered up in phy_start(). This patch fixes this scenario. Signed-off-by:
Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4: Fix VF MAC address change under RoCE usage This short series provides proper handling for the case where a VF netdevice change their MAC address under a RoCE use case. The code it deals with was introduced in 3.15-rc1 Prior to this series the source MAC used for the VM RoCE CM packets remains as before the MAC modification. Hence RoCE CM packets sent by the VF will not carry the same source MAC address as the non-CM packets. Earlier 3.15-rc commit f24f790f "net/mlx4_core: Load the Eth driver first" handled just one instance of the problem, but this one provides a more generic and proper solution which covers all cases of VF mac change. ==================== Signed-off-by:
-
Matan Barak authored
When we receive a netdev event indicating a netdev change and/or a netdev address change, we must change the MAC index used by the proxy QP1 (in the QP context), otherwise RoCE CM packets sent by the VF will not carry the same source MAC address as the non-CM packets. We use the UPDATE_QP command to perform this change. In order to avoid modifying a QP context based on netdev event, while the driver attempts to destroy this QP (e.g either the mlx4_ib or ib_mad modules are unloaded), we use mutex locking in both flows. Since the relevant mlx4 proxy GSI QP is created indirectly by the mad module when they create their GSI QP, the mlx4 didn't need to keep track on that QP prior to this change. Now, when QP modifications are needed to this QP from within the driver, we added refernece to it. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Matan Barak authored
This patch adds UPDATE_QP SRIOV wrapper support. The mechanism is a general one, but currently only source MAC index changes are allowed for VFs. Signed-off-by:
-
Nikolay Aleksandrov authored
I've missed to add a NULL entry to the bond_intmax_tbl when I introduced it with the conversion of arp_interval so add it now. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Fixes: 7bdb04ed ("bonding: convert arp_interval to use the new option API") Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Zoltan Kiss authored
The original series for reintroducing grant mapping for netback had a patch [1] to handle receiving of packets from an another VIF. Grant copy on the receiving side needs the grant ref of the page to set up the op. The original patch assumed (wrongly) that the frags array haven't changed. In the case reported by Sander, the sending guest sent a packet where the linear buffer and the first frag were under PKT_PROT_LEN (=128) bytes. xenvif_tx_submit() then pulled up the linear area to 128 bytes, and ditched the first frag. The receiving side had an off-by-one problem when gathered the grant refs. This patch fixes that by checking whether the actual frag's page pointer is the same as the page in the original frag list. It can handle any kind of changes on the original frags array, like: - removing granted frags from the array at any point - adding local pages to the frags list anywhere - reordering the frags It's optimized to the most common case, when there is 1:1 relation between the frags and the list, plus works optimal when frags are removed from the end or the beginning. [1]: 3e2234: xen-netback: Handle foreign mapped pages on the guest RX path Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
Zoltan Kiss <zoltan.kiss@citrix.com> Acked-by:
-
Duan Jiong authored
RFC 4861 states in 7.2.5: The IsRouter flag in the cache entry MUST be set based on the Router flag in the received advertisement. In those cases where the IsRouter flag changes from TRUE to FALSE as a result of this update, the node MUST remove that router from the Default Router List and update the Destination Cache entries for all destinations using that neighbor as a router as specified in Section 7.3.3. This is needed to detect when a node that is used as a router stops forwarding packets due to being configured as a host. Currently, when dealing with NA Message which IsRouter flag changes from TRUE to FALSE, the kernel only removes router from the Default Router List, and don't update the Destination Cache entries. Now in order to update those Destination Cache entries, i introduce function rt6_clean_tohost(). Signed-off-by:Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Conflicts: net/ipv4/ip_vti.c Steffen Klassert says: ==================== pull request (net): ipsec 2014-05-15 This pull request has a merge conflict in net/ipv4/ip_vti.c between commit 8d89dcdf ("vti: don't allow to add the same tunnel twice") and commit a3245236 ("vti4:Don't count header length twice"). It can be solved like it is done in linux-next. 1) Fix a ipv6 xfrm output crash when a packet is rerouted by netfilter to not use IPsec. 2) vti4 counts some header lengths twice leading to an incorrect device mtu. Fix this by counting these headers only once. 3) We don't catch the case if an unsupported protocol is submitted to the xfrm protocol handlers, this can lead to NULL pointer dereferences. Fix this by adding the appropriate checks. 4) vti6 may unregister pernet ops twice on init errors. Fix this by removing one of the calls to do it only once. From Mathias Krause. 5) Set the vti tunnel mark before doing a lookup in the error handlers. Otherwise we don't find the correct xfrm state. ==================== The conflict in ip_vti.c was simple, 'net' had a commit removing a line from vti_tunnel_init() and this tree being merged had a commit adding a line to the same location. Signed-off-by:
-
Guenter Roeck authored
After the call to phy_init_hw failed in phy_attach_direct, phy_detach is called to detach the phy device from its network device. If the attached driver is a generic phy driver, this also detaches the driver. Subsequently phy_resume is called, which assumes without checking that a driver is attached to the device. This will result in a crash such as Unable to handle kernel paging request for data at address 0xffffffffffffff90 Faulting instruction address: 0xc0000000003a0e18 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0000000003a0e18] .phy_attach_direct+0x68/0x17c LR [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c Call Trace: [c0000003fc0475d0] [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c (unreliable) [c0000003fc047670] [c0000000003a0ff8] .phy_connect_direct+0x28/0x98 [c0000003fc047700] [c0000000003f0074] .of_phy_connect+0x4c/0xa4 Only call phy_resume if phy_init_hw was successful. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
- 15 May, 2014 9 commits
-
-
David S. Miller authored
Vince Bridgers says: ==================== Altera TSE: Fix Sparse errors and misc issues This is version 2 of a patch series to correct sparse errors, cppcheck warnings, and workaound a multicast filtering issue in the Altera TSE Ethernet driver. Multicast filtering is not working as expected, so if present in the hardware will not be used and promiscuous mode enabled instead. This workaround will be replaced with a working solution when completely debugged, integrated and tested. Version 2 is different from the first submission by breaking out the workaround as a seperate patch and addressing a few structure instance declarations by making them const per review comments. If you find this patch acceptable, please consider this for inclusion into the Altera TSE driver source code. ==================== Signed-off-by: -
Vince Bridgers authored
This patch disables multicast hash filtering if present in the hardware and uses promiscuous mode instead until the problem with multicast filtering has been debugged, integrated and tested. Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
-
Vince Bridgers authored
This patch fixes the many sparse errors and warnings contained in the initial submission of the Altera Triple Speed Ethernet driver, and a few minor cppcheck warnings. Changes are tested on ARM and NIOS2 example designs, and compile tested against multiple architectures. Typical issues addressed were as follows: altera_tse_ethtool.c:136:19: warning: incorrect type in argument 1 (different address spaces) altera_tse_ethtool.c:136:19: expected void const volatile [noderef] <asn:2>*addr altera_tse_ethtool.c:136:19: got unsigned int *<noident> ... altera_sgdma.c:129:31: warning: cast removes address space of expression Signed-off-by: -
Cong Wang authored
From: Cong Wang <cwang@twopensource.com> commit 50624c93 (net: Delay default_device_exit_batch until no devices are unregistering) introduced rtnl_lock_unregistering() for default_device_exit_batch(). Same race could happen we when rmmod a driver which calls rtnl_link_unregister() as we call dev->destructor without rtnl lock. For long term, I think we should clean up the mess of netdev_run_todo() and net namespce exit code. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Antonio Quartulli authored
Change introduced by 88e48d7b ("batman-adv: make DAT drop ARP requests targeting local clients") implements a check that prevents DAT from using the caching mechanism when the client that is supposed to provide a reply to an arp request is local. However change brought by be1db4f6 ("batman-adv: make the Distributed ARP Table vlan aware") has not converted the above check into its vlan aware version thus making it useless when the local client is behind a vlan. Fix the behaviour by properly specifying the vlan when checking for a client being local or not. Reported-by:
Simon Wunderlich <simon@open-mesh.com> Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch>
-
Antonio Quartulli authored
A pointer to the orig_node representing a bat-gateway is stored in the gw_node->orig_node member, but the refcount for such orig_node is never increased. This leads to memory faults when gw_node->orig_node is accessed and the originator has already been freed. Fix this by increasing the refcount on gw_node creation and decreasing it on gw_node free. Signed-off-by:
-
Antonio Quartulli authored
In the new fragmentation code the batadv_frag_send_packet() function obtains a reference to the primary_if, but it does not release it upon return. This reference imbalance prevents the primary_if (and then the related netdevice) to be properly released on shut down. Fix this by releasing the primary_if in batadv_frag_send_packet(). Introduced by ee75ed88 ("batman-adv: Fragment and send skbs larger than mtu") Cc: Martin Hundebøll <martin@hundeboll.net> Signed-off-by:
Martin Hundebøll <martin@hundeboll.net>
-
Marek Lindner authored
If hard_iface is NULL and goto out is made batadv_hardif_free_ref() doesn't check for NULL before dereferencing it to get to refcount. Introduced in cb1c92ec ("batman-adv: add debugfs support to view multiif tables"). Reported-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 14 May, 2014 8 commits
-
-
Heiko Carstens authored
This is the s390 variant of Alexei's JIT bug fix. (patch description below stolen from Alexei's patch) bpf_alloc_binary() adds 128 bytes of room to JITed program image and rounds it up to the nearest page size. If image size is close to page size (like 4000), it is rounded to two pages: round_up(4000 + 4 + 128) == 8192 then 'hole' is computed as 8192 - (4000 + 4) = 4188 If prandom_u32() % hole selects a number >= PAGE_SIZE - sizeof(*header) then kernel will crash during bpf_jit_free(): kernel BUG at arch/x86/mm/pageattr.c:887! Call Trace: [<ffffffff81037285>] change_page_attr_set_clr+0x135/0x460 [<ffffffff81694cc0>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff810378ff>] set_memory_rw+0x2f/0x40 [<ffffffffa01a0d8d>] bpf_jit_free_deferred+0x2d/0x60 [<ffffffff8106bf98>] process_one_work+0x1d8/0x6a0 [<ffffffff8106bf38>] ? process_one_work+0x178/0x6a0 [<ffffffff8106c90c>] worker_thread+0x11c/0x370 since bpf_jit_free() does: unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; struct bpf_binary_header *header = (void *)addr; to compute start address of 'bpf_binary_header' and header->pages will pass junk to: set_memory_rw(addr, header->pages); Fix it by making sure that &header->image[prandom_u32() % hole] and &header are in the same page. Fixes: aa2d2c73 ("s390/bpf,jit: address randomize and write protect jit code") Reported-by:
Alexei Starovoitov <ast@plumgrid.com> Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Rajkumar Manoharan authored
During remain on channel request, ANI worker thread is not stopped before doing hw reset. This is causing kernel crash in hw_per_calibration. This change ensures that ANI is stopped before doing chip reset and it will be rescheduled later when the chip is configured back to home channel and having valid bss. Reported-by:
David Herrmann <dh.herrmann@gmail.com> Tested-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
-
Ursula Braun authored
When sending data through IUCV a MESSAGE COMPLETE interrupt signals that sent data memory can be freed or reused again. With commit f9c41a62 "af_iucv: fix recvmsg by replacing skb_pull() function" the MESSAGE COMPLETE callback iucv_callback_txdone() identifies the wrong skb as being confirmed, which leads to data corruption. This patch fixes the skb mapping logic in iucv_callback_txdone(). Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kalesh AP authored
On some BE3 FW versions, after a HW reset, interrupts will remain disabled for each function. So, explicitly enable the interrupts in the eeh_resume handler, else after an eeh recovery interrupts wouldn't work. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Neil Horman authored
In my recent fix (76a691d0: fix dma unmap warning), Ben Hutchings noted that my loop count was incorrect. Where j started at startidx, it should have started at zero, and gone on for count entries, not to endidx. Additionally, a DMA resource exhaustion should drop the frame and (for now), return NETDEV_TX_OK, not NETEV_TX_BUSY. This patch fixes both of those issues: Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Ben Hutchings <ben@decadent.org.uk> CC: "David S. Miller" <davem@davemloft.net> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by:
-
Johannes Berg authored
Jouni reported that if a remain-on-channel was active on the same channel as the current operating channel, then the ROC would start, but any frames transmitted using mgmt-tx on the same channel would get delayed until after the ROC. The reason for this is that the ROC starts, but doesn't have any handling for "remain on the same channel", so it stops the interface queues. The later mgmt-tx then puts the frame on the interface queues (since it's on the current operating channel) and thus they get delayed until after the ROC. To fix this, add some logic to handle remaining on the same channel specially and not stop the queues etc. in this case. This not only fixes the bug but also improves behaviour in this case as data frames etc. can continue to flow. Cc: stable@vger.kernel.org Reported-by:
Jouni Malinen <j@w1.fi> Tested-by:
Johannes Berg <johannes.berg@intel.com>
-
Hannes Frederic Sowa authored
tot_len does specify the size of struct ipv6_txoptions. We need opt_flen + opt_nflen to calculate the overall length of additional ipv6 extensions. I found this while auditing the ipv6 output path for a memory corruption reported by Alexey Preobrazhensky while he fuzzed an instrumented AddressSanitizer kernel with trinity. This may or may not be the cause of the original bug. Fixes: 4df98e76 ("ipv6: pmtudisc setting not respected with UFO/CORK") Reported-by:
Alexey Preobrazhensky <preobr@google.com> Signed-off-by:
-
