- 08 Sep, 2021 40 commits
-
-
Randy Dunlap authored
Fix all kernel-doc warnings in lib/iov_iter.c: lib/iov_iter.c:695: warning: Function parameter or member 'i' not described in '_copy_mc_to_iter' lib/iov_iter.c:695: warning: Excess function parameter 'iter' description in '_copy_mc_to_iter' lib/iov_iter.c:695: warning: No description found for return value of '_copy_mc_to_iter' lib/iov_iter.c:758: warning: Function parameter or member 'i' not described in '_copy_from_iter_flushcache' lib/iov_iter.c:758: warning: Excess function parameter 'iter' description in '_copy_from_iter_flushcache' lib/iov_iter.c:758: warning: No description found for return value of '_copy_from_iter_flushcache' Link: https://lkml.kernel.org/r/20210809051053.6531-1-rdunlap@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc warnings in dump_stack.c: lib/dump_stack.c:97: warning: Function parameter or member 'log_lvl' not described in 'dump_stack_lvl' lib/dump_stack.c:97: warning: expecting prototype for dump_stack(). Prototype was for dump_stack_lvl() instead Link: https://lkml.kernel.org/r/20210809051643.17567-1-rdunlap@infradead.orgSigned-off-by:
-
Daniel Latypov authored
This follows up commit ebd09577 ("lib/test: convert lib/test_list_sort.c to use KUnit"). Converting this test to KUnit makes the test a bit shorter, standardizes how it reports pass/fail, and adds an easier way to run the test [1]. Like ebd09577, this leaves the file and Kconfig option name the same, but slightly changes their dependencies (needs CONFIG_KUNIT). [1] Can be run via $ ./tools/testing/kunit/kunit.py run --kunitconfig /dev/stdin <<EOF CONFIG_KUNIT=y CONFIG_TEST_SORT=y EOF [11:30:27] Starting KUnit Kernel ... [11:30:30] ============================================================ [11:30:30] ======== [PASSED] lib_sort ======== [11:30:30] [PASSED] test_sort [11:30:30] ============================================================ [11:30:30] Testing complete. 1 tests run. 0 failed. 0 crashed. 0 skipped. [11:30:30] Elapsed time: 37.032s total, 0.001s configuring, 34.090s building, 0.000s running Note: this is the time it took after a `make mrproper`. With an incremental rebuild, this looks more like: [11:38:58] Elapsed time: 6.444s total, 0.001s configuring, 3.416s building, 0.000s running Since the test has no dependencies, it can also be run (with some other tests) with just: $ ./tools/testing/kunit/kunit.py run Link: https://lkml.kernel.org/r/20210715232441.1380885-1-dlatypov@google.comSigned-off-by:
Daniel Latypov <dlatypov@google.com> Cc: Pravin Shedge <pravin.shedge4linux@gmail.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by:
-
Geert Uytterhoeven authored
RATIONAL_KUNIT_TEST selects RATIONAL, thus enabling an optional feature the user may not want to have enabled. Fix this by making the test depend on RATIONAL instead. Link: https://lkml.kernel.org/r/20210706100945.3803694-3-geert@linux-m68k.org Fixes: b6c75c4a ("lib/math/rational: add Kunit test cases") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Trent Piepho <tpiepho@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
Patch series "math: RATIONAL and RATIONAL_KUNIT_TEST improvements". This series makes the RATIONAL symbol tristate, so it is not forced builtin if all users are modular, and makes the RATIONAL_KUNIT_TEST depend on RATIONAL, to avoid enabling RATIONAL if there are no real users. This patch (of 2): All but one symbols that select RATIONAL are tristate, but RATIONAL itself is bool. Change it to tristate, so the rational fractions support code can be modular if no builtin code relies on it. Link: https://lkml.kernel.org/r/20210706100945.3803694-1-geert@linux-m68k.org Link: https://lkml.kernel.org/r/20210706100945.3803694-2-geert@linux-m68k.orgSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Trent Piepho <tpiepho@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by:
-
Nathan Chancellor authored
This should have been done with commit 91ed3ed0 ("MAINTAINERS: update ClangBuiltLinux IRC chat") but I did not realize it was in two separate spots. Link: https://lkml.kernel.org/r/20210825211823.6406-3-nathan@kernel.orgSigned-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
-
Nathan Chancellor authored
We are now at llvm@lists.linux.dev. Link: https://lkml.kernel.org/r/20210825211823.6406-2-nathan@kernel.orgSigned-off-by:
-
Nathan Chancellor authored
We are now at llvm@lists.linux.dev. Link: https://lkml.kernel.org/r/20210825211823.6406-1-nathan@kernel.orgSigned-off-by:
-
Pavel Skripkin authored
Syzbot reported shift-out-of-bounds bug in profile_init(). The problem was in incorrect prof_shift. Since prof_shift value comes from userspace we need to clamp this value into [0, BITS_PER_LONG -1] boundaries. Second possible shiht-out-of-bounds was found by Tetsuo: sample_step local variable in read_profile() had "unsigned int" type, but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent possible shiht-out-of-bounds sample_step type was changed to "unsigned long". Also, "unsigned short int" will be sufficient for storing [0, BITS_PER_LONG] value, that's why there is no need for "unsigned long" prof_shift. Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com Suggested-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Yang Yang authored
Use rlimit() helper instead of manually writing whole chain from task to rlimit value. See patch "posix-cpu-timers: Use dedicated helper to access rlimit values". Link: https://lkml.kernel.org/r/20210728030822.524789-1-yang.yang29@zte.com.cnSigned-off-by:
Yang Yang <yang.yang29@zte.com.cn> Reported-by:
Zeal Robot <zealci@zte.com.cn> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: sh_def@163.com <sh_def@163.com> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-11-daniel.lezcano@linaro.orgSigned-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-10-daniel.lezcano@linaro.orgSigned-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-9-daniel.lezcano@linaro.orgSigned-off-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-8-daniel.lezcano@linaro.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. The new macro is an unsigned long. The code dealing with it is considering as an unsigned long also. Link: https://lkml.kernel.org/r/20210816114732.1834145-7-daniel.lezcano@linaro.orgSigned-off-by:
Christian Eggers <ceggers@arri.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-6-daniel.lezcano@linaro.orgSigned-off-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. The new macro has an unsigned long type. All the code is dealing with unsigned long and the code using the macro is doing a coercitive cast to unsigned long. Link: https://lkml.kernel.org/r/20210816114732.1834145-5-daniel.lezcano@linaro.orgSigned-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. The new macro uses a unsigned long type which is already the type in the current code via the 'freq' variable. Link: https://lkml.kernel.org/r/20210816114732.1834145-4-daniel.lezcano@linaro.orgSigned-off-by:
-
Daniel Lezcano authored
The macros for the unit conversion for frequency are duplicated in different places. Provide these macros in the 'units' header, so they can be reused. Link: https://lkml.kernel.org/r/20210816114732.1834145-3-daniel.lezcano@linaro.orgSigned-off-by:
-
Daniel Lezcano authored
Patch series "Add Hz macros", v3. There are multiple definitions of the HZ_PER_MHZ or HZ_PER_KHZ in the different drivers. Instead of duplicating this definition again and again, add one in the units.h header to be reused in all the place the redefiniton occurs. At the same time, change the type of the Watts, as they can not be negative. This patch (of 10): The users of the macros are safe to be assigned with an unsigned instead of signed as the variables using them are themselves unsigned. Link: https://lkml.kernel.org/r/20210816114732.1834145-1-daniel.lezcano@linaro.org Link: https://lkml.kernel.org/r/20210816114732.1834145-2-daniel.lezcano@linaro.orgSigned-off-by:
-
Andy Shevchenko authored
Fix trivia typo Not -> Note in the comment to DO_ONCE(). Link: https://lkml.kernel.org/r/20210722184349.76290-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Colin Ian King authored
Threre is a spelling mistake in the Kconfig text. Fix it. Link: https://lkml.kernel.org/r/20210704095207.37342-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ohhoon Kwon authored
While comm change event via prctl has been reported to proc connector by 'commit f786ecba ("connector: add comm change event report to proc connector")', connector listeners were missing comm changes by explicit writes on /proc/[pid]/comm. Let explicit writes on /proc/[pid]/comm report to proc connector. Link: https://lkml.kernel.org/r/20210701133458epcms1p68e9eb9bd0eee8903ba26679a37d9d960@epcms1p6Signed-off-by:
Ohhoon Kwon <ohoono.kwon@samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
Use seq_escape_str and seq_printf instead of poking holes into the seq_file abstraction. Link: https://lkml.kernel.org/r/20210810151945.1795567-1-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This is not needed by any modules, so remove the export. Link: https://lkml.kernel.org/r/20210722185814.504541-1-gregkh@linuxfoundation.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Randy Dunlap authored
Fix all kernel-doc warnings in arch/alpha/kernel/pci-sysfs.c: arch/alpha/kernel/pci-sysfs.c:67: warning: No description found for return value of 'pci_mmap_resource' arch/alpha/kernel/pci-sysfs.c:115: warning: Function parameter or member 'pdev' not described in 'pci_remove_resource_files' arch/alpha/kernel/pci-sysfs.c:115: warning: Excess function parameter 'dev' description in 'pci_remove_resource_files' arch/alpha/kernel/pci-sysfs.c:230: warning: Function parameter or member 'pdev' not described in 'pci_create_resource_files' arch/alpha/kernel/pci-sysfs.c:230: warning: Excess function parameter 'dev' description in 'pci_create_resource_files' arch/alpha/kernel/pci-sysfs.c:232: warning: No description found for return value of 'pci_create_resource_files' arch/alpha/kernel/pci-sysfs.c:305: warning: Function parameter or member 'bus' not described in 'pci_adjust_legacy_attr' arch/alpha/kernel/pci-sysfs.c:305: warning: Excess function parameter 'b' description in 'pci_adjust_legacy_attr' Link: https://lkml.kernel.org/r/20210808185249.31442-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Copy these macros from ia64/include/asm/agp.h to avoid the "empty-body" in 'if' statment warning. drivers/char/agp/generic.c: In function 'agp_generic_destroy_page': ../drivers/char/agp/generic.c:1265:42: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 1265 | unmap_page_from_agp(page); Link: https://lkml.kernel.org/r/20210809030822.20658-1-rdunlap@infradead.orgSigned-off-by:
-
SeongJae Park authored
This commit updates MAINTAINERS file for DAMON related files. Link: https://lkml.kernel.org/r/20210716081449.22187-14-sj38.park@gmail.comSigned-off-by:
SeongJae Park <sjpark@amazon.de> Reviewed-by:
Markus Boehme <markubo@amazon.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
SeongJae Park authored
This commit adds a simple user space tests for DAMON. The tests are using kselftest framework. Link: https://lkml.kernel.org/r/20210716081449.22187-13-sj38.park@gmail.comSigned-off-by:
-
SeongJae Park authored
This commit adds kunit based unit tests for the core and the virtual address spaces monitoring primitives of DAMON. Link: https://lkml.kernel.org/r/20210716081449.22187-12-sj38.park@gmail.comSigned-off-by:
Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
SeongJae Park authored
This commit adds documents for DAMON under `Documentation/admin-guide/mm/damon/` and `Documentation/vm/damon/`. Link: https://lkml.kernel.org/r/20210716081449.22187-11-sj38.park@gmail.comSigned-off-by:
Fernand Sieber <sieberf@amazon.com> Reviewed-by:
-
SeongJae Park authored
In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.comSigned-off-by: -
SeongJae Park authored
For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.comSigned-off-by:
-
SeongJae Park authored
DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.comSigned-off-by:Leonard Foerster <foersleo@amazon.de> Reviewed-by:
-
SeongJae Park authored
This commit adds a tracepoint for DAMON. It traces the monitoring results of each region for each aggregation interval. Using this, DAMON can easily integrated with tracepoints supporting tools such as perf. Link: https://lkml.kernel.org/r/20210716081449.22187-7-sj38.park@gmail.comSigned-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
SeongJae Park authored
This commit introduces a reference implementation of the address space specific low level primitives for the virtual address space, so that users of DAMON can easily monitor the data accesses on virtual address spaces of specific processes by simply configuring the implementation to be used by DAMON. The low level primitives for the fundamental access monitoring are defined in two parts: 1. Identification of the monitoring target address range for the address space. 2. Access check of specific address range in the target space. The reference implementation for the virtual address space does the works as below. PTE Accessed-bit Based Access Check ----------------------------------- The implementation uses PTE Accessed-bit for basic access checks. That is, it clears the bit for the next sampling target page and checks whether it is set again after one sampling period. This could disturb the reclaim logic. DAMON uses ``PG_idle`` and ``PG_young`` page flags to solve the conflict, as Idle page tracking does. VMA-based Target Address Range Construction ------------------------------------------- Only small parts in the super-huge virtual address space of the processes are mapped to physical memory and accessed. Thus, tracking the unmapped address regions is just wasteful. However, because DAMON can deal with some level of noise using the adaptive regions adjustment mechanism, tracking every mapping is not strictly required but could even incur a high overhead in some cases. That said, too huge unmapped areas inside the monitoring target should be removed to not take the time for the adaptive mechanism. For the reason, this implementation converts the complex mappings to three distinct regions that cover every mapped area of the address space. Also, the two gaps between the three regions are the two biggest unmapped areas in the given address space. The two biggest unmapped areas would be the gap between the heap and the uppermost mmap()-ed region, and the gap between the lowermost mmap()-ed region and the stack in most of the cases. Because these gaps are exceptionally huge in usual address spaces, excluding these will be sufficient to make a reasonable trade-off. Below shows this in detail:: <heap> <BIG UNMAPPED REGION 1> <uppermost mmap()-ed region> (small mmap()-ed regions and munmap()-ed regions) <lowermost mmap()-ed region> <BIG UNMAPPED REGION 2> <stack> [akpm@linux-foundation.org: mm/damon/vaddr.c needs highmem.h for kunmap_atomic()] [sjpark@amazon.de: remove unnecessary PAGE_EXTENSION setup] Link: https://lkml.kernel.org/r/20210806095153.6444-2-sj38.park@gmail.com [sjpark@amazon.de: safely walk page table] Link: https://lkml.kernel.org/r/20210831161800.29419-1-sj38.park@gmail.com Link: https://lkml.kernel.org/r/20210716081449.22187-6-sj38.park@gmail.comSigned-off-by: -
SeongJae Park authored
PG_idle and PG_young allow the two PTE Accessed bit users, Idle Page Tracking and the reclaim logic concurrently work while not interfering with each other. That is, when they need to clear the Accessed bit, they set PG_young to represent the previous state of the bit, respectively. And when they need to read the bit, if the bit is cleared, they further read the PG_young to know whether the other has cleared the bit meanwhile or not. For yet another user of the PTE Accessed bit, we could add another page flag, or extend the mechanism to use the flags. For the DAMON usecase, however, we don't need to do that just yet. IDLE_PAGE_TRACKING and DAMON are mutually exclusive, so there's only ever going to be one user of the current set of flags. In this commit, we split out the CONFIG options to allow for the use of PG_young and PG_idle outside of idle page tracking. In the next commit, DAMON's reference implementation of the virtual memory address space monitoring primitives will use it. [sjpark@amazon.de: set PAGE_EXTENSION for non-64BIT] Link: https://lkml.kernel.org/r/20210806095153.6444-1-sj38.park@gmail.com [akpm@linux-foundation.org: tweak Kconfig text] [sjpark@amazon.de: hide PAGE_IDLE_FLAG from users] Link: https://lkml.kernel.org/r/20210813081238.34705-1-sj38.park@gmail.com Link: https://lkml.kernel.org/r/20210716081449.22187-5-sj38.park@gmail.comSigned-off-by:
-
SeongJae Park authored
Even somehow the initial monitoring target regions are well constructed to fulfill the assumption (pages in same region have similar access frequencies), the data access pattern can be dynamically changed. This will result in low monitoring quality. To keep the assumption as much as possible, DAMON adaptively merges and splits each region based on their access frequency. For each ``aggregation interval``, it compares the access frequencies of adjacent regions and merges those if the frequency difference is small. Then, after it reports and clears the aggregated access frequency of each region, it splits each region into two or three regions if the total number of regions will not exceed the user-specified maximum number of regions after the split. In this way, DAMON provides its best-effort quality and minimal overhead while keeping the upper-bound overhead that users set. Link: https://lkml.kernel.org/r/20210716081449.22187-4-sj38.park@gmail.comSigned-off-by:
-
SeongJae Park authored
To avoid the unbounded increase of the overhead, DAMON groups adjacent pages that are assumed to have the same access frequencies into a region. As long as the assumption (pages in a region have the same access frequencies) is kept, only one page in the region is required to be checked. Thus, for each ``sampling interval``, 1. the 'prepare_access_checks' primitive picks one page in each region, 2. waits for one ``sampling interval``, 3. checks whether the page is accessed meanwhile, and 4. increases the access count of the region if so. Therefore, the monitoring overhead is controllable by adjusting the number of regions. DAMON allows both the underlying primitives and user callbacks to adjust regions for the trade-off. In other words, this commit makes DAMON to use not only time-based sampling but also space-based sampling. This scheme, however, cannot preserve the quality of the output if the assumption is not guaranteed. Next commit will address this problem. Link: https://lkml.kernel.org/r/20210716081449.22187-3-sj38.park@gmail.comSigned-off-by:
-
SeongJae Park authored
Patch series "Introduce Data Access MONitor (DAMON)", v34. Introduction ============ DAMON is a data access monitoring framework for the Linux kernel. The core mechanisms of DAMON called 'region based sampling' and 'adaptive regions adjustment' (refer to 'mechanisms.rst' in the 11th patch of this patchset for the detail) make it - accurate (The monitored information is useful for DRAM level memory management. It might not appropriate for Cache-level accuracy, though.), - light-weight (The monitoring overhead is low enough to be applied online while making no impact on the performance of the target workloads.), and - scalable (the upper-bound of the instrumentation overhead is controllable regardless of the size of target workloads.). Using this framework, therefore, several memory management mechanisms such as reclamation and THP can be optimized to aware real data access patterns. Experimental access pattern aware memory management optimization works that incurring high instrumentation overhead will be able to have another try. Though DAMON is for kernel subsystems, it can be easily exposed to the user space by writing a DAMON-wrapper kernel subsystem. Then, user space users who have some special workloads will be able to write personalized tools or applications for deeper understanding and specialized optimizations of their systems. DAMON is also merged in two public Amazon Linux kernel trees that based on v5.4.y[1] and v5.10.y[2]. [1] https://github.com/amazonlinux/linux/tree/amazon-5.4.y/master/mm/damon [2] https://github.com/amazonlinux/linux/tree/amazon-5.10.y/master/mm/damon The userspace tool[1] is available, released under GPLv2, and actively being maintained. I am also planning to implement another basic user interface in perf[2]. Also, the basic test suite for DAMON is available under GPLv2[3]. [1] https://github.com/awslabs/damo [2] https://lore.kernel.org/linux-mm/20210107120729.22328-1-sjpark@amazon.com/ [3] https://github.com/awslabs/damon-tests Long-term Plan -------------- DAMON is a part of a project called Data Access-aware Operating System (DAOS). As the name implies, I want to improve the performance and efficiency of systems using fine-grained data access patterns. The optimizations are for both kernel and user spaces. I will therefore modify or create kernel subsystems, export some of those to user space and implement user space library / tools. Below shows the layers and components for the project. --------------------------------------------------------------------------- Primitives: PTE Accessed bit, PG_idle, rmap, (Intel CMT), ... Framework: DAMON Features: DAMOS, virtual addr, physical addr, ... Applications: DAMON-debugfs, (DARC), ... ^^^^^^^^^^^^^^^^^^^^^^^ KERNEL SPACE ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Raw Interface: debugfs, (sysfs), (damonfs), tracepoints, (sys_damon), ... vvvvvvvvvvvvvvvvvvvvvvv USER SPACE vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Library: (libdamon), ... Tools: DAMO, (perf), ... --------------------------------------------------------------------------- The components in parentheses or marked as '...' are not implemented yet but in the future plan. IOW, those are the TODO tasks of DAOS project. For more detail, please refer to the plans: https://lore.kernel.org/linux-mm/20201202082731.24828-1-sjpark@amazon.com/ Evaluations =========== We evaluated DAMON's overhead, monitoring quality and usefulness using 24 realistic workloads on my QEMU/KVM based virtual machine running a kernel that v24 DAMON patchset is applied. DAMON is lightweight. It increases system memory usage by 0.39% and slows target workloads down by 1.16%. DAMON is accurate and useful for memory management optimizations. An experimental DAMON-based operation scheme for THP, namely 'ethp', removes 76.15% of THP memory overheads while preserving 51.25% of THP speedup. Another experimental DAMON-based 'proactive reclamation' implementation, 'prcl', reduces 93.38% of residential sets and 23.63% of system memory footprint while incurring only 1.22% runtime overhead in the best case (parsec3/freqmine). NOTE that the experimental THP optimization and proactive reclamation are not for production but only for proof of concepts. Please refer to the official document[1] or "Documentation/admin-guide/mm: Add a document for DAMON" patch in this patchset for detailed evaluation setup and results. [1] https://damonitor.github.io/doc/html/latest-damon/admin-guide/mm/damon/eval.html Real-world User Story ===================== In summary, DAMON has used on production systems and proved its usefulness. DAMON as a profiler ------------------- We analyzed characteristics of a large scale production systems of our customers using DAMON. The systems utilize 70GB DRAM and 36 CPUs. From this, we were able to find interesting things below. There were obviously different access pattern under idle workload and active workload. Under the idle workload, it accessed large memory regions with low frequency, while the active workload accessed small memory regions with high freuqnecy. DAMON found a 7GB memory region that showing obviously high access frequency under the active workload. We believe this is the performance-effective working set and need to be protected. There was a 4KB memory region that showing highest access frequency under not only active but also idle workloads. We think this must be a hottest code section like thing that should never be paged out. For this analysis, DAMON used only 0.3-1% of single CPU time. Because we used recording-based analysis, it consumed about 3-12 MB of disk space per 20 minutes. This is only small amount of disk space, but we can further reduce the disk usage by using non-recording-based DAMON features. I'd like to argue that only DAMON can do such detailed analysis (finding 4KB highest region in 70GB memory) with the light overhead. DAMON as a system optimization tool ----------------------------------- We also found below potential performance problems on the systems and made DAMON-based solutions. The system doesn't want to make the workload suffer from the page reclamation and thus it utilizes enough DRAM but no swap device. However, we found the system is actively reclaiming file-backed pages, because the system has intensive file IO. The file IO turned out to be not performance critical for the workload, but the customer wanted to ensure performance critical file-backed pages like code section to not mistakenly be evicted. Using direct IO should or `mlock()` would be a straightforward solution, but modifying the user space code is not easy for the customer. Alternatively, we could use DAMON-based operation scheme[1]. By using it, we can ask DAMON to track access frequency of each region and make 'process_madvise(MADV_WILLNEED)[2]' call for regions having specific size and access frequency for a time interval. We also found the system is having high number of TLB misses. We tried 'always' THP enabled policy and it greatly reduced TLB misses, but the page reclamation also been more frequent due to the THP internal fragmentation caused memory bloat. We could try another DAMON-based operation scheme that applies 'MADV_HUGEPAGE' to memory regions having >=2MB size and high access frequency, while applying 'MADV_NOHUGEPAGE' to regions having <2MB size and low access frequency. We do not own the systems so we only reported the analysis results and possible optimization solutions to the customers. The customers satisfied about the analysis results and promised to try the optimization guides. [1] https://lore.kernel.org/linux-mm/20201006123931.5847-1-sjpark@amazon.com/ [2] https://lore.kernel.org/linux-api/20200622192900.22757-4-minchan@kernel.org/ Comparison with Idle Page Tracking ================================== Idle Page Tracking allows users to set and read idleness of pages using a bitmap file which represents each page with each bit of the file. One recommended usage of it is working set size detection. Users can do that by 1. find PFN of each page for workloads in interest, 2. set all the pages as idle by doing writes to the bitmap file, 3. wait until the workload accesses its working set, and 4. read the idleness of the pages again and count pages became not idle. NOTE: While Idle Page Tracking is for user space users, DAMON is primarily designed for kernel subsystems though it can easily exposed to the user space. Hence, this section only assumes such user space use of DAMON. For what use cases Idle Page Tracking would be better? ------------------------------------------------------ 1. Flexible usecases other than hotness monitoring. Because Idle Page Tracking allows users to control the primitive (Page idleness) by themselves, Idle Page Tracking users can do anything they want. Meanwhile, DAMON is primarily designed to monitor the hotness of each memory region. For this, DAMON asks users to provide sampling interval and aggregation interval. For the reason, there could be some use case that using Idle Page Tracking is simpler. 2. Physical memory monitoring. Idle Page Tracking receives PFN range as input, so natively supports physical memory monitoring. DAMON is designed to be extensible for multiple address spaces and use cases by implementing and using primitives for the given use case. Therefore, by theory, DAMON has no limitation in the type of target address space as long as primitives for the given address space exists. However, the default primitives introduced by this patchset supports only virtual address spaces. Therefore, for physical memory monitoring, you should implement your own primitives and use it, or simply use Idle Page Tracking. Nonetheless, RFC patchsets[1] for the physical memory address space primitives is already available. It also supports user memory same to Idle Page Tracking. [1] https://lore.kernel.org/linux-mm/20200831104730.28970-1-sjpark@amazon.com/ For what use cases DAMON is better? ----------------------------------- 1. Hotness Monitoring. Idle Page Tracking let users know only if a page frame is accessed or not. For hotness check, the user should write more code and use more memory. DAMON do that by itself. 2. Low Monitoring Overhead DAMON receives user's monitoring request with one step and then provide the results. So, roughly speaking, DAMON require only O(1) user/kernel context switches. In case of Idle Page Tracking, however, because the interface receives contiguous page frames, the number of user/kernel context switches increases as the monitoring target becomes complex and huge. As a result, the context switch overhead could be not negligible. Moreover, DAMON is born to handle with the monitoring overhead. Because the core mechanism is pure logical, Idle Page Tracking users might be able to implement the mechanism on their own, but it would be time consuming and the user/kernel context switching will still more frequent than that of DAMON. Also, the kernel subsystems cannot use the logic in this case. 3. Page granularity working set size detection. Until v22 of this patchset, this was categorized as the thing Idle Page Tracking could do better, because DAMON basically maintains additional metadata for each of the monitoring target regions. So, in the page granularity working set size detection use case, DAMON would incur (number of monitoring target pages * size of metadata) memory overhead. Size of the single metadata item is about 54 bytes, so assuming 4KB pages, about 1.3% of monitoring target pages will be additionally used. All essential metadata for Idle Page Tracking are embedded in 'struct page' and page table entries. Therefore, in this use case, only one counter variable for working set size accounting is required if Idle Page Tracking is used. There are more details to consider, but roughly speaking, this is true in most cases. However, the situation changed from v23. Now DAMON supports arbitrary types of monitoring targets, which don't use the metadata. Using that, DAMON can do the working set size detection with no additional space overhead but less user-kernel context switch. A first draft for the implementation of monitoring primitives for this usage is available in a DAMON development tree[1]. An RFC patchset for it based on this patchset will also be available soon. Since v24, the arbitrary type support is dropped from this patchset because this patchset doesn't introduce real use of the type. You can still get it from the DAMON development tree[2], though. [1] https://github.com/sjp38/linux/tree/damon/pgidle_hack [2] https://github.com/sjp38/linux/tree/damon/master 4. More future usecases While Idle Page Tracking has tight coupling with base primitives (PG_Idle and page table Accessed bits), DAMON is designed to be extensible for many use cases and address spaces. If you need some special address type or want to use special h/w access check primitives, you can write your own primitives for that and configure DAMON to use those. Therefore, if your use case could be changed a lot in future, using DAMON could be better. Can I use both Idle Page Tracking and DAMON? -------------------------------------------- Yes, though using them concurrently for overlapping memory regions could result in interference to each other. Nevertheless, such use case would be rare or makes no sense at all. Even in the case, the noise would bot be really significant. So, you can choose whatever you want depending on the characteristics of your use cases. More Information ================ We prepared a showcase web site[1] that you can get more information. There are - the official documentations[2], - the heatmap format dynamic access pattern of various realistic workloads for heap area[3], mmap()-ed area[4], and stack[5] area, - the dynamic working set size distribution[6] and chronological working set size changes[7], and - the latest performance test results[8]. [1] https://damonitor.github.io/_index [2] https://damonitor.github.io/doc/html/latest-damon [3] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.0.png.html [4] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html [5] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.2.png.html [6] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html [7] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html [8] https://damonitor.github.io/test/result/perf/latest/html/index.html Baseline and Complete Git Trees =============================== The patches are based on the latest -mm tree, specifically v5.14-rc1-mmots-2021-07-15-18-47 of https://github.com/hnaz/linux-mm. You can also clone the complete git tree: $ git clone git://github.com/sjp38/linux -b damon/patches/v34 The web is also available: https://github.com/sjp38/linux/releases/tag/damon/patches/v34 Development Trees ----------------- There are a couple of trees for entire DAMON patchset series and features for future release. - For latest release: https://github.com/sjp38/linux/tree/damon/master - For next release: https://github.com/sjp38/linux/tree/damon/next Long-term Support Trees ----------------------- For people who want to test DAMON but using LTS kernels, there are another couple of trees based on two latest LTS kernels respectively and containing the 'damon/master' backports. - For v5.4.y: https://github.com/sjp38/linux/tree/damon/for-v5.4.y - For v5.10.y: https://github.com/sjp38/linux/tree/damon/for-v5.10.y Amazon Linux Kernel Trees ------------------------- DAMON is also merged in two public Amazon Linux kernel trees that based on v5.4.y[1] and v5.10.y[2]. [1] https://github.com/amazonlinux/linux/tree/amazon-5.4.y/master/mm/damon [2] https://github.com/amazonlinux/linux/tree/amazon-5.10.y/master/mm/damon Git Tree for Diff of Patches ============================ For easy review of diff between different versions of each patch, I prepared a git tree containing all versions of the DAMON patchset series: https://github.com/sjp38/damon-patches You can clone it and use 'diff' for easy review of changes between different versions of the patchset. For example: $ git clone https://github.com/sjp38/damon-patches && cd damon-patches $ diff -u damon/v33 damon/v34 Sequence Of Patches =================== First three patches implement the core logics of DAMON. The 1st patch introduces basic sampling based hotness monitoring for arbitrary types of targets. Following two patches implement the core mechanisms for control of overhead and accuracy, namely regions based sampling (patch 2) and adaptive regions adjustment (patch 3). Now the essential parts of DAMON is complete, but it cannot work unless someone provides monitoring primitives for a specific use case. The following two patches make it just work for virtual address spaces monitoring. The 4th patch makes 'PG_idle' can be used by DAMON and the 5th patch implements the virtual memory address space specific monitoring primitives using page table Accessed bits and the 'PG_idle' page flag. Now DAMON just works for virtual address space monitoring via the kernel space api. To let the user space users can use DAMON, following four patches add interfaces for them. The 6th patch adds a tracepoint for monitoring results. The 7th patch implements a DAMON application kernel module, namely damon-dbgfs, that simply wraps DAMON and exposes DAMON interface to the user space via the debugfs interface. The 8th patch further exports pid of monitoring thread (kdamond) to user space for easier cpu usage accounting, and the 9th patch makes the debugfs interface to support multiple contexts. Three patches for maintainability follows. The 10th patch adds documentations for both the user space and the kernel space. The 11th patch provides unit tests (based on the kunit) while the 12th patch adds user space tests (based on the kselftest). Finally, the last patch (13th) updates the MAINTAINERS file. This patch (of 13): DAMON is a data access monitoring framework for the Linux kernel. The core mechanisms of DAMON make it - accurate (the monitoring output is useful enough for DRAM level performance-centric memory management; It might be inappropriate for CPU cache levels, though), - light-weight (the monitoring overhead is normally low enough to be applied online), and - scalable (the upper-bound of the overhead is in constant range regardless of the size of target workloads). Using this framework, hence, we can easily write efficient kernel space data access monitoring applications. For example, the kernel's memory management mechanisms can make advanced decisions using this. Experimental data access aware optimization works that incurring high access monitoring overhead could again be implemented on top of this. Due to its simple and flexible interface, providing user space interface would be also easy. Then, user space users who have some special workloads can write personalized applications for better understanding and optimizations of their workloads and systems. === Nevertheless, this commit is defining and implementing only basic access check part without the overhead-accuracy handling core logic. The basic access check is as below. The output of DAMON says what memory regions are how frequently accessed for a given duration. The resolution of the access frequency is controlled by setting ``sampling interval`` and ``aggregation interval``. In detail, DAMON checks access to each page per ``sampling interval`` and aggregates the results. In other words, counts the number of the accesses to each region. After each ``aggregation interval`` passes, DAMON calls callback functions that previously registered by users so that users can read the aggregated results and then clears the results. This can be described in below simple pseudo-code:: init() while monitoring_on: for page in monitoring_target: if accessed(page): nr_accesses[page] += 1 if time() % aggregation_interval == 0: for callback in user_registered_callbacks: callback(monitoring_target, nr_accesses) for page in monitoring_target: nr_accesses[page] = 0 if time() % update_interval == 0: update() sleep(sampling interval) The target regions constructed at the beginning of the monitoring and updated after each ``regions_update_interval``, because the target regions could be dynamically changed (e.g., mmap() or memory hotplug). The monitoring overhead of this mechanism will arbitrarily increase as the size of the target workload grows. The basic monitoring primitives for actual access check and dynamic target regions construction aren't in the core part of DAMON. Instead, it allows users to implement their own primitives that are optimized for their use case and configure DAMON to use those. In other words, users cannot use current version of DAMON without some additional works. Following commits will implement the core mechanisms for the overhead-accuracy control and default primitives implementations. Link: https://lkml.kernel.org/r/20210716081449.22187-1-sj38.park@gmail.com Link: https://lkml.kernel.org/r/20210716081449.22187-2-sj38.park@gmail.comSigned-off-by:
-
