Since commit 4005d1ba ("ASoC: soc-dai: don't call PCM audio ops if
the stream is not supported") HDMI playback is broken with avs driver.
This happens because for HDMI stream (unlike generic HDA one)
channels_min for stream is not set when creating PCMs. Fix this by
setting the value based on first available converter.

Fixes: 4005d1ba ("ASoC: soc-dai: don't call PCM audio ops if the stream is not supported")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240112113349.2905328-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

There was a typo in oxygen mixer code that didn't update the right
channel value properly for the capture volume.  Let's fix it.

This trivial fix was originally reported on Bugzilla.

Fixes: a3601560 ("[ALSA] oxygen: add front panel controls")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=156561
Link: https://lore.kernel.org/r/20240112111023.6208-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

There's a use case that playback stream of a loopback cable works on
RW_INTERLEAVED mode while capture stream works on MMAP_INTERLEAVED mode:

aplay -Dhw:Loopback,0,0 S32_48K_2ch.wav;
arecord -Dplughw:Loopback,1,0 -fS32_LE -r16000 -c2 cap.wav;

The plug plugin handles only slave PCM support MMAP mode. Not only plug
plugin but also other plugins like direct plugins(dmix/dsnoop/dshare)
work on MMAP access mode. In this case capture stream is the slave
PCM works on MMAP_INTERLEAVED mode. However loopback_check_format()
rejects this access setting and return:

arecord: pcm_read:2240: read error: Input/output error

To fix it a function called is_access_interleaved() is introduced to
get if access is interleaved mode. If both access of capture stream and
playback stream is interleaved mode loopback_check_format() will allow
this kind of access setting.

Fixes: 46249456 ("ALSA: aloop: Add support for the non-interleaved access mode")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20240111025219.2678764-1-chancel.liu@nxp.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

GCC 13.2.0 reported the warning of the print format specifier:

conf.c: In function ‘sysfs_get’:
conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \
			but argument 3 has type ‘int’ [-Wformat=]
  181 |                 ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n",
      |                                                                       ~^
      |                                                                        |
      |                                                                        char *
      |                                                                       %d

The fix passes strerror(errno) as it was intended, like in the sibling error
exit message.

Fixes: aba51cd0 ("selftests: alsa - add PCM test")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-5-mirsad.todorovac@alu.unizg.hrSigned-off-by: Takashi Iwai <tiwai@suse.de>

GCC 13.2.0 compiler issued the following warning:

mixer-test.c:350:80: warning: format ‘%ld’ expects argument of type ‘long int’, \
			      but argument 5 has type ‘unsigned int’ [-Wformat=]
  350 |                         ksft_print_msg("%s.%d value %ld more than item count %ld\n",
      |                                                                              ~~^
      |                                                                                |
      |                                                                                long int
      |                                                                              %d
  351 |                                        ctl->name, index, int_val,
  352 |                                        snd_ctl_elem_info_get_items(ctl->info));
      |                                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                        |
      |                                        unsigned int

Fixing the format specifier in call to ksft_print_msg() according to the
compiler suggestion silences the warning.

Fixes: 10f2f194 ("kselftest: alsa: Validate values read from enumerations")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-4-mirsad.todorovac@alu.unizg.hrSigned-off-by: Takashi Iwai <tiwai@suse.de>

The GCC 13.2.0 compiler issued the following warning:

mixer-test.c: In function ‘ctl_value_index_valid’:
mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \
			      but argument 5 has type ‘long int’ [-Wformat=]
  322 |                         ksft_print_msg("%s.%d value %lld more than maximum %lld\n",
      |                                                                            ~~~^
      |                                                                               |
      |                                                                               long long int
      |                                                                            %ld
  323 |                                        ctl->name, index, int64_val,
  324 |                                        snd_ctl_elem_info_get_max(ctl->info));
      |                                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                        |
      |                                        long int

Fixing the format specifier as advised by the compiler suggestion removes the
warning.

Fixes: 3f48b137 ("kselftest: alsa: Factor out check that values meet constraints")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-3-mirsad.todorovac@alu.unizg.hrSigned-off-by: Takashi Iwai <tiwai@suse.de>

Minor fix in the number of arguments to error reporting function in the
test program as reported by GCC 13.2.0 warning.

mixer-test.c: In function ‘find_controls’:
mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args]
  169 |                         ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The number of arguments in call to ksft_exit_fail_msg() doesn't correspond
to the format specifiers, so this is adjusted resembling the sibling calls
to the error function.

Fixes: b1446bda ("kselftest: alsa: Check for event generation when we write to controls")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-2-mirsad.todorovac@alu.unizg.hrSigned-off-by: Takashi Iwai <tiwai@suse.de>

Sparse reports an endian mismatch.
The amplifier expects the calibration data as big-endian.
Use the __be32 type to express endianness better.

Fixes: c3ca4458 ("ALSA: hda/tas2781: add TAS2563 support for 14ARB7")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401072137.Oc7pQgRW-lkp@intel.com/Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3852ff28ea7d5d8f2086d8dd78aeff8d1d984991.1704748435.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>

This enables the mute and mic-mute LEDs on the HP Envy X360 13-ay0xxx
convertibles.
The quirk 'ALC245_FIXUP_HP_X360_MUTE_LEDS' already exists and is now
enabled for this device.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216197Signed-off-by: Tom Jason Schwanke <tom@catboys.cloud>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/651b26e9-e86b-45dd-aa90-3e43d6b99823@catboys.cloudSigned-off-by: Takashi Iwai <tiwai@suse.de>

When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards,
the headset type detection circuit will recognize the headset type as CTIA.
At this point, plugout and plugin the headset will get the correct headset
type as OMTP.
The reason for the failure of headset type recognition is that the sound
card creation will enable the VREF voltage of the headset mic, which
interferes with the headset type automatic detection circuit. Plugout and
plugin the headset will restart the headset detection and get the correct
headset type.
The patch is disable the VREF voltage when the headset is not present, and
will enable the VREF voltage when the headset is present.
Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://lore.kernel.org/r/20240108110235.3867-1-bo.liu@senarytech.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.8

This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases.  Highlights include:

 - Enhanced support for N:M CPU:CODEC mappings in the core and in
   audio-graph-card2.
 - Support for falling back to older SOF IPC versions where firmware for
   new versions is not available.
 - Support for notification of control changes generated by SOF firmware
   with IPC4.
 - Device tree support for describing parts of the card which can be
   active over suspend (for very low power playback or wake word use
   cases).
 - ACPI parsing support for the ES83xx driver, reducing the number of
   quirks neede for x86 systems.
 - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
   SM8250, SM8550, SM8650 and X1E80100.
 - Removal of Freescale MPC8610 support, the SoC is no longer supported
   by Linux.

Prepare for 6.8 merge.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec.
Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF'
to fix mute and mic-mute LEDs.
Signed-off-by: Siddhesh Dharme <siddheshdharme18@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240104060736.5149-1-siddheshdharme18@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.7-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.7

I recently got a LibreTech Sapphire board for my CI and while
integrating it found and fixed some issues, including crashes for the
enum validation.  There's also a couple of patches adding quirks for
another x86 laptop from Hans and an error handling fix for the Freescale
rpmsg driver.

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.

Fixes: c8609f38 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.

Fixes: af2618a2 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: c8609f38 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: af2618a2 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
   the hdac driver is probed at this point

During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.

On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl

The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:

1. snd_hdac_device_register()
   the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
   will be a NOP as the module is already loaded

Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:

1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()

This way at the hdac driver probe all parameters will be set in all cases.

Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4a ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304Signed-off-by: Takashi Iwai <tiwai@suse.de>

When CONFIG_SPI is disabled, the driver produces unused-variable warning:

sound/pci/hda/cs35l41_hda_property.c: In function 'generic_dsd_config':
sound/pci/hda/cs35l41_hda_property.c:181:28: error: unused variable 'spi' [-Werror=unused-variable]
  181 |         struct spi_device *spi;
      |                            ^~~
sound/pci/hda/cs35l41_hda_property.c:180:27: error: unused variable 'cs_gpiod' [-Werror=unused-variable]
  180 |         struct gpio_desc *cs_gpiod;
      |                           ^~~~~~~~

Avoid these by turning the preprocessor contionals into equivalent C code,
which also helps readability.

Fixes: 916d0517 ("ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240103102606.3742476-1-arnd@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The ac97_bus_type structure is no longer declared in this file:

sound/ac97/bus.c: In function 'ac97_codec_add':
sound/ac97/bus.c:112:27: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'bus_type'?
  112 |         codec->dev.bus = &ac97_bus_type;
      |                           ^~~~~~~~~~~~~
      |                           bus_type
sound/ac97/bus.c:112:27: note: each undeclared identifier is reported only once for each function it appears in
sound/ac97/bus.c: In function 'snd_ac97_codec_driver_register':
sound/ac97/bus.c:191:28: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'ac97_bus_reset'?
  191 |         drv->driver.bus = &ac97_bus_type;

Include the header that contains the declaration and make sure the definition
is const but not static.

Fixes: 66e82d21 ("ALSA: mark all struct bus_type as const")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240103102544.3715055-1-arnd@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull updates for CS35L41 codec for HP models.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This adds overrides for a series of notebooks using a common config
taken from HP's proprietary Windows driver.

This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20240102214821.3394810-1-lorenz@brun.oneSigned-off-by: Takashi Iwai <tiwai@suse.de>

The 14ARB7 has two tas2563 amplifier on i2c.
Connect it to the tas2781 driver.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>

The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7
laptop. It has two TAS2563 amplifier. Add the PNP ID
and calibration functions to handle them.

ACPI excerpt:

Scope (_SB.I2CD)
{
    Device (TAS)
    {
        Name (_HID, "INT8866")  // _HID: Hardware ID
        Name (_UID, Zero)  // _UID: Unique ID
        Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
        {
            Name (RBUF, ResourceTemplate ()
            {
                I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
                    AddressingMode7Bit, "\\_SB.I2CD",
                    0x00, ResourceConsumer, , Exclusive,
                    )
                I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80,
                    AddressingMode7Bit, "\\_SB.I2CD",
                    0x00, ResourceConsumer, , Exclusive,
                    )
                GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000,
                    "\\_SB.GPIO", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0020
                    }
             })
             Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
        }

        Method (_STA, 0, NotSerialized)  // _STA: Status
        {
            Return (0x0F)
        }
    }
}
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>

Make the global i2c address configurable to support compatible amplifiers
with different global i2c address.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>

Make calibration functions configurable to support different calibration
data storage modes.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>

There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.

[ confirmed that the new entries are for new models that have no
  proper name, so the strings are left as "HP" which will be updated
  eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull CS35L41 codec updates for Lenovo laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add driver properties on 4 models of this laptop serie since they don't
have _DSD in the ACPI table
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114312.22118-1-doriancruveiller@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Link up the realtek audio chip to the cirrus cs35l41 sound amplifier chip
on 4 models of the Lenovo legion slim 7 gen 8 (2023). These models are
16IRH8 (2 differents subsystem id) and 16APH8 (2 differents subsystem ids).

Subsystem ids list:
 - 17AA38B4
 - 17AA38B5
 - 17AA38B6
 - 17AA38B7
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114001.19855-1-doriancruveiller@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Make the amp available immediately after a module
load to avoid having to wait for a PCM hook action.
(eg. unloading & loading the module while listening
music)
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/7f2f65d9212aa16edd4db8725489ae59dbe74c66.1703895108.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Now that the driver core can properly handle constant struct bus_type,
move all of the sound subsystem struct bus_type structures as const,
placing them into read-only memory which can not be modified at runtime.

Note, this fixes a duplicate definition of ac97_bus_type, which somehow
was declared extern in a .h file, and then static as a prototype in a .c
file, and then properly later on in the same .c file.  Amazing that no
compiler warning ever showed up for this.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Dawei Li <set_pte_at@outlook.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkhSigned-off-by: Takashi Iwai <tiwai@suse.de>

On ARM64 platforms, SND_ARM shouldn't be selectable, but enabling
SND_SOC_MMP_SSPA will enable SND_ARM and cause build errors if
SND_ARMAACI is enabled (which it is by default). Since the SSPA driver
doesn't depend on AACI nor PXA2XX_LIB, remove this false dependency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310230518.zs9Qpg3j-lkp@intel.com/Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20231226200025.30870-1-duje.mihanovic@skole.hrSigned-off-by: Mark Brown <broonie@kernel.org>

This patch makes sure that the workqueue is completed before the system suspends.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231229092922.853-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.

Fixes: b65c4662 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull Scarlett2 USB audio mixer extensions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the Direct button on the Solo Gen 4 is held for 3 seconds, the
PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer
Outputs E and F. This patch adds the corresponding ALSA control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/8c67c6131c459588ac4edab11e1fbc40a8297328.1703612638.git.g@b4.vu

Add new Focusrite Scarlett Gen 4 USB IDs, notification arrays, config
sets, and device info data.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b33526d3b7a56bb2c86aa4eb2137a415bd23f1ce.1703612638.git.g@b4.vu