* pci/hotplug:
  PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit

* pci/resource:
  PCI: Disable all BAR sizing for devices with non-compliant BARs
  x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
  PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs

b84106b4 ("PCI: Disable IO/MEM decoding for devices with non-compliant
BARs") disabled BAR sizing for BARs 0-5 of devices that don't comply with
the PCI spec.  But it didn't do anything for expansion ROM BARs, so we
still try to size them, resulting in warnings like this on Broadwell-EP:

  pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref]

Move the non-compliant BAR check from __pci_read_base() up to
pci_read_bases() so it applies to the expansion ROM BAR as well as
to BARs 0-5.

Note that direct callers of __pci_read_base(), like sriov_init(), will now
bypass this check.  We haven't had reports of devices with broken SR-IOV
BARs yet.

[bhelgaas: changelog]
Fixes: b84106b4 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andi Kleen <ak@linux.intel.com>

Commit b8941571 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having
non-compliant BARs") marked Home Agent 0 & PCU has having non-compliant
BARs.  Home Agent 1 also has non-compliant BARs.

Mark Home Agent 1 as having non-compliant BARs so the PCI core doesn't
touch them.

The problem with these devices is documented in the Xeon v4 specification
update:

  BDF2          PCI BARs in the Home Agent Will Return Non-Zero Values
                During Enumeration

  Problem:      During system initialization the Operating System may access
                the standard PCI BARs (Base Address Registers).  Due to
                this erratum, accesses to the Home Agent BAR registers (Bus
                1; Device 18; Function 0,4; Offsets (0x14-0x24) will return
                non-zero values.

  Implication:  The operating system may issue a warning.  Intel has not
                observed any functional failures due to this erratum.

Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
Fixes: b8941571 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andi Kleen <ak@linux.intel.com>

Resource flags are exposed to userspace via the sysfs "resource" file.
lspci reads the sysfs file to determine resource properties.

Add a "BAR Equivalent Indicator" flag so lspci can distinguish between
[virtual] and [enhanced] resources.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sean O. Stalley <sean.stalley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We cache the PCI_EXP_SLTCAP_HPC bit in pci_dev->is_hotplug_bridge on device
probe, so there's no need to read it again on allocation of port service
devices.

No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

* pci/dpc:
  PCI: Add Downstream Port Containment driver
  PCI: Add Downstream Port Containment portdrv service type
  PCI: Widen portdrv service type from 4 bits to 8 bits

* pci/resource:
  alpha/PCI: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO
  PCI: Supply CPU physical address (not bus address) to iomem_is_exclusive()

* pci/thunderbolt:
  thunderbolt: Fix double free of drom buffer

Merge branches 'pci/host-armada', 'pci/host-designware', 'pci/host-hv', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-thunder' and 'pci/host-vmd' into next

* pci/host-armada:
  PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller
  dt-bindings: pci: add DT binding for Marvell Armada 7K/8K PCIe controller

* pci/host-designware:
  PCI: designware: Remove incorrect RC memory base/limit configuration
  PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc()

* pci/host-hv:
  PCI: hv: Report resources release after stopping the bus

* pci/host-imx6:
  ARM: dts: imx6qp: Specify imx6qp version of PCIe core
  PCI: imx6: Implement reset sequence for i.MX6+
  PCI: imx6: Use enum instead of bool for variant indicator
  PCI: imx6: Add DT property for link gen, default to Gen1
  PCI: imx6: Add reset-gpio-active-high boolean property to DT
  ARM: dts: imx6: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora
  PCI: imx6: Add initial imx6sx support
  PCI: imx6: Factor out ref clock enable
  Revert "PCI: imx6: Add support for active-low reset GPIO"

* pci/host-keystone:
  PCI: keystone: Remove unnecessary goto statement
  PCI: keystone: Add error IRQ handler

* pci/host-mvebu:
  PCI: mvebu: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops
  PCI: mvebu: Constify mvebu_pcie_pm_ops structure

* pci/host-rcar:
  PCI: rcar: Select PCI_MSI_IRQ_DOMAIN

* pci/host-thunder:
  PCI: thunder: Don't clobber read-only bits in bridge config registers

* pci/host-vmd:
  PCI: Remove return values from pcie_port_platform_notify() and relatives
  PCI/ACPI: Allow all PCIe services on non-ACPI host bridges

Add driver for the PCI Express Downstream Port Containment extended
capability.  DPC is an optional capability to contain uncorrectable errors
below a port.

For more information on DPC, please see PCI Express Base Specification
Revision 4, section 7.31, or view the PCI-SIG DPC ECN here:

  https://pcisig.com/sites/default/files/specification_documents/ECN_DPC_2012-02-09_finalized.pdf

When a DPC event is triggered, the hardware disables downstream links, so
the DPC driver schedules removal for all devices below this port.  This may
happen concurrently with a PCIe hotplug driver if enabled.  When all
downstream devices are removed and the link state transitions to disabled,
the DPC driver clears the DPC status and interrupt bits so the link may
retrain for a newly connected device.

[bhelgaas: clear (not set) DPC_CTL bits on remove, whitespace cleanup]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>

Add the Downstream Port Containment (PCIE_PORT_SERVICE_DPC) portdrv service
type, available if the device has the DPC extended capability.

[bhelgaas: split to separate patch, changelog]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The names of port service devices previously used one nibble to encode the
port type and another nibble to encode the service type.  We're about to
add a fifth service type, so change device names to use one *byte* to
encode the service type.

For example, a hotplug port service on a downstream bridge was previously
called "pcie24" and is now called "pcie204".  The "2" encodes the device
type (PCI_EXP_TYPE_DOWNSTREAM - 4), and the "4" (now "04") encodes the
service (PCIE_PORT_SERVICE_HP).

Based on Lukas Wunner's patch:
https://github.com/l1k/linux/commit/b688d6e4873ab082e5916b1a993bc1d38c6f4178

[bhelgaas: split to separate patch, expand changelog]
Based-on-patch-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Currently dw_pcie_setup_rc() configures memory base and memory limit in the
type1 configuration header for the root complex.  In doing so it uses the
CPU address (pp->mem_base) rather than the bus address (pp->mem_bus_addr).
This is wrong and it is useless since the configuration is overwritten
later on when pci_bus_assign_resources() is called.

Remove this configuration from dw_pcie_setup_rc().
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>

Kernel hang is observed when pci-hyperv module is release with device
drivers still attached.  E.g., when I do 'rmmod pci_hyperv' with BCM5720
device pass-through-ed (tg3 module) I see the following:

 NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [rmmod:2104]
 ...
 Call Trace:
  [<ffffffffa0641487>] tg3_read_mem+0x87/0x100 [tg3]
  [<ffffffffa063f000>] ? 0xffffffffa063f000
  [<ffffffffa0644375>] tg3_poll_fw+0x85/0x150 [tg3]
  [<ffffffffa0649877>] tg3_chip_reset+0x357/0x8c0 [tg3]
  [<ffffffffa064ca8b>] tg3_halt+0x3b/0x190 [tg3]
  [<ffffffffa0657611>] tg3_stop+0x171/0x230 [tg3]
  ...
  [<ffffffffa064c550>] tg3_remove_one+0x90/0x140 [tg3]
  [<ffffffff813bee59>] pci_device_remove+0x39/0xc0
  [<ffffffff814a3201>] __device_release_driver+0xa1/0x160
  [<ffffffff814a32e3>] device_release_driver+0x23/0x30
  [<ffffffff813b794a>] pci_stop_bus_device+0x8a/0xa0
  [<ffffffff813b7ab6>] pci_stop_root_bus+0x36/0x60
  [<ffffffffa02c3f38>] hv_pci_remove+0x238/0x260 [pci_hyperv]

The problem seems to be that we report local resources release before
stopping the bus and removing devices from it and device drivers may try to
perform some operations with these resources on shutdown.  Move resources
release report after we do pci_stop_root_bus().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jake Oshins <jakeo@microsoft.com>

I.MX6Quad Plus has a slightly different version of PCIe core than reqular
i.MX6Quad.
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

I.MX6+ has a dedicated bit for resetting PCIe core, which should be used
instead of a regular reset sequence since using the latter will hang the
SoC.

This commit is based on c34068d48273e24d392d9a49a38be807954420ed from
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.gitTested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Use enumerated type instead of a boolean flag to specify the variant of
the PCIe IP block (6Q, 6SX, etc).  This patch has zero functional impact,
however it makes the code easier to extend for the case of more than 2
possible variants of an IP block (of which there are).

[bhelgaas: rewrap comment, remove extra blank line]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

The 32-bit addressing modes in the I/O and Prefetchable Memory registers
are required to be read-only.  Since the underlying access method allows
them to be set, emulate their read-only nature and always set them.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

If tb_drom_read() fails, sw->drom is freed but not set to NULL.  sw->drom
is then freed again in the error path of tb_switch_alloc().

The bug can be triggered by unplugging a thunderbolt device shortly after
it is detected by the thunderbolt driver.

Clear sw->drom if tb_drom_read() fails.

[bhelgaas: add Fixes:, stable versions of interest]
Fixes: 343fcb8c ("thunderbolt: Fix nontrivial endpoint devices.")
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.17+
CC: Lukas Wunner <lukas@wunner.de>

The R-Car PCIe driver requires the use of IRQ domains for its MSI code:

  drivers/pci/host/pcie-rcar.c:635:9: error: implicit declaration of function 'irq_find_mapping' [-Werror=implicit-function-declaration]
  drivers/pci/host/pcie-rcar.c:666:8: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration]
  ...

Add a Kconfig select to ensure that the feature is always enabled.

This is not consistent with what the other drivers do at the moment, but I
have another patch that changes them to do it like this one, which is more
logical.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

The Marvell Armada 7K/8K SoCs integrate a PCIe controller from Synopsys.
Add a new driver that provides the small glue needed to use the existing
Designware driver to make it work on Marvell Armada 7K/8K SoCs.

The MSI support will be enabled at a later point.

[bhelgaas: use dev_dbg(), dw_pcie_wait_for_link()]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This commit adds the Device Tree binding documentation that allows to
describe the PCIe controller found in Marvell Armada 7K/8K SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <rob@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The alpha pci_mmap_resource() is used for both IORESOURCE_MEM and
IORESOURCE_IO resources, but iomem_is_exclusive() is only applicable for
IORESOURCE_MEM.

Call iomem_is_exclusive() only for IORESOURCE_MEM resources, and do it
earlier to match the generic version of pci_mmap_resource().

Fixes: 10a0ef39 ("PCI/alpha: pci sysfs resources")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>

iomem_is_exclusive() requires a CPU physical address, but on some arches we
supplied a PCI bus address instead.

On most arches, pci_resource_to_user(res) returns "res->start", which is a
CPU physical address.  But on microblaze, mips, powerpc, and sparc, it
returns the PCI bus address corresponding to "res->start".

The result is that pci_mmap_resource() may fail when it shouldn't (if the
bus address happens to match an existing resource), or it may succeed when
it should fail (if the resource is exclusive but the bus address doesn't
match it).

Call iomem_is_exclusive() with "res->start", which is always a CPU physical
address, not the result of pci_resource_to_user().

Fixes: e8de1481 ("resource: allow MMIO exclusivity for device drivers")
Suggested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Arjan van de Ven <arjan@linux.intel.com>

Merge branches 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/ntb', 'pci/thunderbolt' and 'pci/virtualization' into next

* pci/enumeration:
  x86/PCI: Refine PCI support check in pcibios_init()

* pci/hotplug:
  PCI: acpiphp_ibm: Avoid uninitialized variable reference

* pci/misc:
  PCI: Fix spelling errors

* pci/ntb:
  PCI: Add DMA alias quirk for mic_x200_dma
  PCI: Add support for multiple DMA aliases
  PCI: Move informational printk to pci_add_dma_alias()
  PCI: Add pci_add_dma_alias() to abstract implementation

* pci/thunderbolt:
  thunderbolt: Support 1st gen Light Ridge controller
  thunderbolt: Fix typos and magic number
  PCI: Add Intel Thunderbolt device IDs

* pci/virtualization:
  PCI: Work around Intel Sunrise Point PCH incorrect ACS capability
  PCI: Reverse standard ACS vs device-specific ACS enabling
  PCI: Mark Intel i40e NIC INTx masking as broken

Fix the misuse of goto statement in ks_pcie_get_irq_controller_info() as
simple return is more appropriate for this function.  While at it add an
error log for absence of interrupt controller node.

[bhelgaas: drop "ret" altogether since we always know the return value]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>

Freescale has stated [1] that the LVDS clock source of the IMX6 does not
pass the PCI Gen2 clock jitter test, therefore unless an external Gen2
compliant external clock source is present and supplied back to the IMX6
PCIe core via LVDS CLK1/CLK2 you can not claim Gen2 compliance.

Add a DT property to specify Gen1 vs Gen2 and check this before allowing a
Gen2 link.

We default to Gen1 if the property is not present because at this time
there are no IMX6 boards in mainline that 'input' a clock on LVDS
CLK1/CLK2.

In order to be Gen2 compliant on IMX6 you need to:

 - Have a Gen2 compliant external clock generator and route that clock back
   to either LVDS CLK1 or LVDS CLK2 as an input (see IMX6SX-SabreSD
   reference design).

 - Specify this clock in the PCIe node in the DT (i.e.,
   IMX6QDL_CLK_LVDS1_IN or IMX6QDL_CLK_LVDS2_IN instead of
   IMX6QDL_CLK_LVDS1_GATE which configures it as a CLK output).

[1] https://community.freescale.com/message/453209Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Zhu Richard <Richard.Zhu@freescale.com>
CC: Akshay Bhat <akshay.bhat@timesys.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Shawn Guo <shawnguo@kernel.org>

Currently the reset-gpio DT property which controls the PCI bus device
reset signal defaults to active-low reset sequence (L=reset state,
H=operation state) plus the code in reset function isn't GPIO polarity
aware - it doesn't matter if the defined reset-gpio is active-low or
active-high, it will always result into active-low reset sequence.

I've tried to fix it properly and change the reset-gpio reset sequence to
be polarity-aware, but this patch has been accepted and then reverted as it
has introduced few backward incompatible issues:

1. Some DTBs, for example, imx6qdl-sabresd, don't define reset-gpio
polarity correctly:

  reset-gpio = <&gpio7 12 0>;

which means that it's defined as active-high, but in reality it's
active-low; thus it wouldn't work without a DTS fix.

2. The logic in the reset function is inverted:

	gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0)
	msleep(100);
	gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);

so even if some of the i.MX6 boards had reset-gpio polarity defined
correctly in their DTSes, they would stop working.

As we can't break old DTBs, we can't fix them, so we need to introduce this
new DT reset-gpio-active-high boolean property so we can support boards
with active-high reset sequence.

This active-high reset sequence is for example needed on Apalis SoMs, where
GPIO1_IO28, used to PCIe reset is not connected directly to PERST# PCIe
signal, but it's ORed with RESETBMCU coming off the PMIC, and thus is
inverted, active-high.

Tested-by: Tim Harvey <tharvey@gateworks.com>	# Gateworks Ventana boards (which have active-low PERST#)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>

Adding reset-gpio-active-high boolean DT binding property, which we need to
make PCIe working on Apalis SoMs and not break old DTBs. While at it, I've
fixed comment and GPIO polarity.

On Apalis SoMs the GPIO1_IO28 used to PCIe reset is not connected directly
to PERST# PCIe signal, but it's ORed with RESETBMCU coming off the PMIC,
and thus is inverted, active-high.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add initial PCIe support for the imx6 SoC derivate imx6sx.  PCI MSI support
is untested as the necessary suspend/resume quirk is not included in this
patch.

This patch is heavily based on patches by Richard Zhu.

[bhelgaas: factor out refclk enable, fix adjacent typos in imx6q-pcie.txt]
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>

Factor out ref clock enable to make it cleaner to add imx6sx support.  No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>

Intel Sunrise Point root ports implement ACS but use dwords for the
capability and control registers, putting the control register at the wrong
offset.

Use quirks to enable and test ACS for these devices, which match the
standard functions modulo the broken control register offset.

Note that lspci assumes devices implement ACS per spec, so it shows invalid
ACS data for these devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The original thought was that if a device implemented ACS, then surely
we want to use that... well, it turns out that devices can make an ACS
capability so broken that we still need to fall back to quirks.

Reverse the order of ACS enabling to give quirks first shot at it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

All of the i40e (XL710/X710) 10/20/40GbE NICs lack support for indicating
INTx is asserted via the interrupt bit in the PCI status register.  The
DisINTx bit in the command register is functional, causing these devices to
be incorrectly detected as supporting INTx masking.  Quirk them to properly
indicate no INTx masking support.

Device IDs copied from i40e_devids.h.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: John Ronciak <john.ronciak@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>

If ibm_get_table_from_acpi() fails then "table" isn't initialized.  Check
for failure so we don't reference "table" unless it's been initialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Keystone PCI hardware generates error interrupts at RC using a platform IRQ
instead of a standard MSI or legacy IRQ.  Add a simple error handler that
logs the fatal interrupt status to the console.

[bhelgaas: s/node/dev->of_node/, tidy comments, return irqreturn_t directly]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>

The MIC x200 NTB forwards DMA transactions upstream using multiple alien
RIDs.  These RIDs have to be added as aliases to the DMA device to allow
buffer access when the IOMMU is enabled.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>

Also consider raw_pci_ext_ops when validating if a system has PCI support.
This leads to proper resource allocation via pcibios_resource_survey() in
the case where PCI config space is exclusively accessed through MMCONFIG.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Solve IOMMU support issues with PCIe non-transparent bridges that use
Requester ID look-up tables (RID-LUT), e.g., the PEX8733.

The NTB connects devices in two independent PCI domains.  Devices separated
by the NTB are not able to discover each other.  A PCI packet being
forwared from one domain to another has to have its RID modified so it
appears on correct bus and completions are forwarded back to the original
domain through the NTB.  The RID is translated using a preprogrammed table
(LUT) and the PCI packet propagates upstream away from the NTB.  If the
destination system has IOMMU enabled, the packet will be discarded because
the new RID is unknown to the IOMMU.  Adding a DMA alias for the new RID
allows IOMMU to properly recognize the packet.

Each device behind the NTB has a unique RID assigned in the RID-LUT.  The
current DMA alias implementation supports only a single alias, so it's not
possible to support mutiple devices behind the NTB when IOMMU is enabled.

Enable all possible aliases on a given bus (256) that are stored in a
bitset.  Alias devfn is directly translated to a bit number.  The bitset is
not allocated for devices that have no need for DMA aliases.

More details can be found in the following article:
http://www.plxtech.com/files/pdf/technical/expresslane/RTC_Enabling%20MulitHostSystemDesigns.pdfSigned-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>

One of the quirks that adds DMA aliases logs an informational message in
dmesg.  Move that to pci_add_dma_alias() so all users log the message
consistently.  No functional change intended (except extra message).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Add a pci_add_dma_alias() interface to encapsulate the details of adding an
alias.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Now that pcie_port_acpi_setup() always returns 0, make it and its callers
void functions and stop checking the return values.

[bhelgaas: changelog]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>