- 06 Apr, 2019 19 commits
-
-
Sven Schnelle authored
While working on kretprobes for PA-RISC I was wondering while the kprobes sanity test always fails on kretprobes. This is caused by returning gpr20 instead of gpr28. Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+
-
Helge Deller authored
Revert parts of commit 97d7e2e3 ("parisc: Use F_EXTEND() macro in iosapic code"). It breaks booting the 32-bit kernel on some machines. Reported-by:
Sven Schnelle <svens@stackframe.org> Tested-by:
Sven Schnelle <svens@stackframe.org> Fixes: 97d7e2e3 ("parisc: Use F_EXTEND() macro in iosapic code") Signed-off-by:
Helge Deller <deller@gmx.de>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kernel/sysctl.c: fix out-of-bounds access when setting file-max mm/util.c: fix strndup_user() comment sh: fix multiple function definition build errors MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM mm: writeback: use exact memcg dirty counts psi: clarify the units used in pressure files mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd() hugetlbfs: fix memory leak for resv_map mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX() lib/lzo: fix bugs for very short or empty input include/linux/bitrev.h: fix constant bitrev kmemleak: powerpc: skip scanning holes in the .bss section lib/string.c: implement a basic bcmp
-
Will Deacon authored
Commit 32a5ad9c ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9c ("sysctl: handle overflow for file-max") Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Christian Brauner <christian@brauner.io> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
The kerneldoc misdescribes strndup_user()'s return value. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Many of the sh CPU-types have their own plat_irq_setup() and arch_init_clk_ops() functions, so these same (empty) functions in arch/sh/boards/of-generic.c are not needed and cause build errors. If there is some case where these empty functions are needed, they can be retained by marking them as "__weak" while at the same time making builds that do not need them succeed. Fixes these build errors: arch/sh/boards/of-generic.o: In function `plat_irq_setup': (.init.text+0x134): multiple definition of `plat_irq_setup' arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here arch/sh/boards/of-generic.o: In function `arch_init_clk_ops': (.init.text+0x118): multiple definition of `arch_init_clk_ops' arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kbuild test robot <lkp@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tomer Maimon authored
Add Tali Perry as Nuvoton NPCM maintainer, replace Brendan Higgins Nuvoton NPCM reviewer with Benjamin Fair. Link: http://lkml.kernel.org/r/20190328235752.334462-2-tmaimon77@gmail.comSigned-off-by:
Tomer Maimon <tmaimon77@gmail.com> Reviewed-by:
Brendan Higgins <brendanhiggins@google.com> Reviewed-by:
Benjamin Fair <benjaminfair@google.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Joe Perches <joe@perches.com> Cc: Avi Fishman <avifishman70@gmail.com> Cc: Patrick Venture <venture@google.com> Cc: Nancy Yuen <yuenn@google.com> Cc: Tali Perry <tali.perry1@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tomer Maimon authored
In the process of upstreaming architecture support for ARM/NUVOTON NPCM include/dt-bindings/clock/nuvoton,npcm7xx-clks.h was renamed include/dt-bindings/clock/nuvoton,npcm7xx-clock.h without updating MAINTAINERS. This updates the MAINTAINERS pattern to match the new name of this file. Link: http://lkml.kernel.org/r/20190328235752.334462-1-tmaimon77@gmail.com Fixes: 6a498e06 ("MAINTAINERS: Add entry for the Nuvoton NPCM architecture") Signed-off-by:
Brendan Higgins <brendanhiggins@google.com> Signed-off-by:
Tomer Maimon <tmaimon77@gmail.com> Reported-by:
Joe Perches <joe@perches.com> Reviewed-by:
Benjamin Fair <benjaminfair@google.com> Cc: Avi Fishman <avifishman70@gmail.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Nancy Yuen <yuenn@google.com> Cc: Patrick Venture <venture@google.com> Cc: Tali Perry <tali.perry1@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Thelen authored
Since commit a983b5eb ("mm: memcontrol: fix excessive complexity in memory.stat reporting") memcg dirty and writeback counters are managed as: 1) per-memcg per-cpu values in range of [-32..32] 2) per-memcg atomic counter When a per-cpu counter cannot fit in [-32..32] it's flushed to the atomic. Stat readers only check the atomic. Thus readers such as balance_dirty_pages() may see a nontrivial error margin: 32 pages per cpu. Assuming 100 cpus: 4k x86 page_size: 13 MiB error per memcg 64k ppc page_size: 200 MiB error per memcg Considering that dirty+writeback are used together for some decisions the errors double. This inaccuracy can lead to undeserved oom kills. One nasty case is when all per-cpu counters hold positive values offsetting an atomic negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32). balance_dirty_pages() only consults the atomic and does not consider throttling the next n_cpu*32 dirty pages. If the file_lru is in the 13..200 MiB range then there's absolutely no dirty throttling, which burdens vmscan with only dirty+writeback pages thus resorting to oom kill. It could be argued that tiny containers are not supported, but it's more subtle. It's the amount the space available for file lru that matters. If a container has memory.max-200MiB of non reclaimable memory, then it will also suffer such oom kills on a 100 cpu machine. The following test reliably ooms without this patch. This patch avoids oom kills. $ cat test mount -t cgroup2 none /dev/cgroup cd /dev/cgroup echo +io +memory > cgroup.subtree_control mkdir test cd test echo 10M > memory.max (echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo) (echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100) $ cat memcg-writeback-stress.c /* * Dirty pages from all but one cpu. * Clean pages from the non dirtying cpu. * This is to stress per cpu counter imbalance. * On a 100 cpu machine: * - per memcg per cpu dirty count is 32 pages for each of 99 cpus * - per memcg atomic is -99*32 pages * - thus the complete dirty limit: sum of all counters 0 * - balance_dirty_pages() only sees atomic count -99*32 pages, which * it max()s to 0. * - So a workload can dirty -99*32 pages before balance_dirty_pages() * cares. */ #define _GNU_SOURCE #include <err.h> #include <fcntl.h> #include <sched.h> #include <stdlib.h> #include <stdio.h> #include <sys/stat.h> #include <sys/sysinfo.h> #include <sys/types.h> #include <unistd.h> static char *buf; static int bufSize; static void set_affinity(int cpu) { cpu_set_t affinity; CPU_ZERO(&affinity); CPU_SET(cpu, &affinity); if (sched_setaffinity(0, sizeof(affinity), &affinity)) err(1, "sched_setaffinity"); } static void dirty_on(int output_fd, int cpu) { int i, wrote; set_affinity(cpu); for (i = 0; i < 32; i++) { for (wrote = 0; wrote < bufSize; ) { int ret = write(output_fd, buf+wrote, bufSize-wrote); if (ret == -1) err(1, "write"); wrote += ret; } } } int main(int argc, char **argv) { int cpu, flush_cpu = 1, output_fd; const char *output; if (argc != 2) errx(1, "usage: output_file"); output = argv[1]; bufSize = getpagesize(); buf = malloc(getpagesize()); if (buf == NULL) errx(1, "malloc failed"); output_fd = open(output, O_CREAT|O_RDWR); if (output_fd == -1) err(1, "open(%s)", output); for (cpu = 0; cpu < get_nprocs(); cpu++) { if (cpu != flush_cpu) dirty_on(output_fd, cpu); } set_affinity(flush_cpu); if (fsync(output_fd)) err(1, "fsync(%s)", output); if (close(output_fd)) err(1, "close(%s)", output); free(buf); } Make balance_dirty_pages() and wb_over_bg_thresh() work harder to collect exact per memcg counters. This avoids the aforementioned oom kills. This does not affect the overhead of memory.stat, which still reads the single atomic counter. Why not use percpu_counter? memcg already handles cpus going offline, so no need for that overhead from percpu_counter. And the percpu_counter spinlocks are more heavyweight than is required. It probably also makes sense to use exact dirty and writeback counters in memcg oom reports. But that is saved for later. Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.comSigned-off-by:
Greg Thelen <gthelen@google.com> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> [4.16+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Waiman Long authored
The output of the PSI files show a bunch of numbers with no unit. The psi.txt documentation file also does not indicate what units are used. One can only find out by looking at the source code. The units are percentage for the averages and useconds for the total. Make the information easier to find by documenting the units in psi.txt. Link: http://lkml.kernel.org/r/20190402193810.3450-1-longman@redhat.comSigned-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Aneesh Kumar K.V authored
With some architectures like ppc64, set_pmd_at() cannot cope with a situation where there is already some (different) valid entry present. Use pmdp_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PMD entries. This is similar to commit cae85cb8 ("mm/memory.c: fix modifying of page protection by insert_pfn()") We also do similar update w.r.t insert_pfn_pud eventhough ppc64 don't support pud pfn entries now. Without this patch we also see the below message in kernel log "BUG: non-zero pgtables_bytes on freeing mm:" Link: http://lkml.kernel.org/r/20190402115125.18803-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by:
Chandan Rajendra <chandan@linux.ibm.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Kravetz authored
When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked. Programs to reproduce: mount -t hugetlbfs nodev hugetlbfs mknod hugetlbfs/dev b 0 0 exec 30<> hugetlbfs/dev umount hugetlbfs/ resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations. Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Reported-by:
Yufen Yu <yuyufen@huawei.com> Suggested-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jann Horn authored
Symmetrically to VM_FAULT_SET_HINDEX(), we need a force-cast in VM_FAULT_GET_HINDEX() to tell sparse that this is intentional. Sparse complains about the current code when building a kernel with CONFIG_MEMORY_FAILURE: arch/x86/mm/fault.c:1058:53: warning: restricted vm_fault_t degrades to integer Link: http://lkml.kernel.org/r/20190327204117.35215-1-jannh@google.com Fixes: 3d353901 ("mm: create the new vm_fault_t type") Signed-off-by:
Jann Horn <jannh@google.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Rodgman authored
For very short input data (0 - 1 bytes), lzo-rle was not behaving correctly. Fix this behaviour and update documentation accordingly. For zero-length input, lzo v0 outputs an end-of-stream marker only, which was misinterpreted by lzo-rle as a bitstream version number. Ensure bitstream versions > 0 require a minimum stream length of 5. Also fixes a bug in handling the tail for very short inputs when a bitstream version is present. Link: http://lkml.kernel.org/r/20190326165857.34613-1-dave.rodgman@arm.comSigned-off-by:
Dave Rodgman <dave.rodgman@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
clang points out with hundreds of warnings that the bitrev macros have a problem with constant input: drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] u8 crc = bitrev8(data->val_status & 0x0F); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8' __constant_bitrev8(__x) : \ ~~~~~~~~~~~~~~~~~~~^~~~ include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8' u8 __x = x; \ ~~~ ^ Both the bitrev and the __constant_bitrev macros use an internal variable named __x, which goes horribly wrong when passing one to the other. The obvious fix is to rename one of the variables, so this adds an extra '_'. It seems we got away with this because - there are only a few drivers using bitrev macros - usually there are no constant arguments to those - when they are constant, they tend to be either 0 or (unsigned)-1 (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and give the correct result by pure chance. In fact, the only driver that I could find that gets different results with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver for fairly rare hardware (adding the maintainer to Cc for testing). Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de Fixes: 556d2f05 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Cc: Yalin Wang <yalin.wang@sonymobile.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Catalin Marinas authored
Commit 2d4f5671 ("KVM: PPC: Introduce kvm_tmp framework") adds kvm_tmp[] into the .bss section and then free the rest of unused spaces back to the page allocator. kernel_init kvm_guest_init kvm_free_tmp free_reserved_area free_unref_page free_unref_page_prepare With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the result, kmemleak scan will trigger a panic when it scans the .bss section with unmapped pages. This patch creates dedicated kmemleak objects for the .data, .bss and potentially .data..ro_after_init sections to allow partial freeing via the kmemleak_free_part() in the powerpc kvm_free_tmp() function. Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.comSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Qian Cai <cai@lca.pw> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by:
Qian Cai <cai@lca.pw> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Avi Kivity <avi@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Desaulniers authored
A recent optimization in Clang (r355672) lowers comparisons of the return value of memcmp against zero to comparisons of the return value of bcmp against zero. This helps some platforms that implement bcmp more efficiently than memcmp. glibc simply aliases bcmp to memcmp, but an optimized implementation is in the works. This results in linkage failures for all targets with Clang due to the undefined symbol. For now, just implement bcmp as a tailcail to memcmp to unbreak the build. This routine can be further optimized in the future. Other ideas discussed: * A weak alias was discussed, but breaks for architectures that define their own implementations of memcmp since aliases to declarations are not permitted (only definitions). Arch-specific memcmp implementations typically declare memcmp in C headers, but implement them in assembly. * -ffreestanding also is used sporadically throughout the kernel. * -fno-builtin-bcmp doesn't work when doing LTO. Link: https://bugs.llvm.org/show_bug.cgi?id=41035 Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13 Link: https://github.com/ClangBuiltLinux/linux/issues/416 Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.comSigned-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Reported-by:
Adhemerval Zanella <adhemerval.zanella@linaro.org> Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
James Y Knight <jyknight@google.com> Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Two queue_limits stacking fixes: disable discards if underlying driver does. And propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors. - Fix that reverts a DM core limit that wasn't needed given that dm-crypt was already updated to impose an equivalent limit. - Fix dm-init to properly establish 'const' for __initconst array. - Fix deadlock in DM integrity target that occurs when overlapping IO is being issued to it. And two smaller fixes to the DM integrity target. * tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix deadlock with overlapping I/O dm: disable DISCARD if the underlying storage no longer supports it dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors dm: revert 8f50e358 ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE") dm init: fix const confusion for dm_allowed_targets array dm integrity: make dm_integrity_init and dm_integrity_exit static dm integrity: change memcmp to strncmp in dm_integrity_ctr
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: - Fix clang printk format errors (Louis Taylor) - Declare structure static to fix sparse warning (Wang Hai) - Limit user DMA mappings per container (CVE-2019-3882) (Alex Williamson) * tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio: vfio/type1: Limit DMA mappings per container vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static vfio/pci: use correct format characters
-
- 05 Apr, 2019 21 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "x86 fixes for overflows and other nastiness" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: nVMX: fix x2APIC VTPR read intercept KVM: x86: nVMX: close leak of L0's x2APIC MSRs (CVE-2019-3887) KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow kvm: svm: fix potential get_num_contig_pages overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Fix unwind_frame() in the context of pseudo NMI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix wrong check of on_sdei_stack in nmi context
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull syscall-get-arguments cleanup and fixes from Steven Rostedt: "Andy Lutomirski approached me to tell me that the syscall_get_arguments() implementation in x86 was horrible and gcc certainly gets it wrong. He said that since the tracepoints only pass in 0 and 6 for i and n repectively, it should be optimized for that case. Inspecting the kernel, I discovered that all users pass in 0 for i and only one file passing in something other than 6 for the number of arguments. That code happens to be my own code used for the special syscall tracing. That can easily be converted to just using 0 and 6 as well, and only copying what is needed. Which is probably the faster path anyway for that case. Along the way, a couple of real fixes came from this as the syscall_get_arguments() function was incorrect for csky and riscv. x86 has been optimized to for the new interface that removes the variable number of arguments, but the other architectures could still use some loving and take more advantage of the simpler interface" * tag 'trace-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: syscalls: Remove start and number from syscall_set_arguments() args syscalls: Remove start and number from syscall_get_arguments() args csky: Fix syscall_get_arguments() and syscall_set_arguments() riscv: Fix syscall_get_arguments() and syscall_set_arguments() tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments() ptrace: Remove maxargs from task_current_syscall()
-
Mikulas Patocka authored
dm-integrity will deadlock if overlapping I/O is issued to it, the bug was introduced by commit 724376a0 ("dm integrity: implement fair range locks"). Users rarely use overlapping I/O so this bug went undetected until now. Fix this bug by correcting, likely cut-n-paste, typos in ranges_overlap() and also remove a flawed ranges_overlap() check in remove_range_unlocked(). This condition could leave unprocessed bios hanging on wait_list forever. Cc: stable@vger.kernel.org # v4.19+ Fixes: 724376a0 ("dm integrity: implement fair range locks") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Marc Orr authored
Referring to the "VIRTUALIZING MSR-BASED APIC ACCESSES" chapter of the SDM, when "virtualize x2APIC mode" is 1 and "APIC-register virtualization" is 0, a RDMSR of 808H should return the VTPR from the virtual APIC page. However, for nested, KVM currently fails to disable the read intercept for this MSR. This means that a RDMSR exit takes precedence over "virtualize x2APIC mode", and KVM passes through L1's TPR to L2, instead of sourcing the value from L2's virtual APIC page. This patch fixes the issue by disabling the read intercept, in VMCS02, for the VTPR when "APIC-register virtualization" is 0. The issue described above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Test VMX's virtualize x2APIC mode w/ nested". Signed-off-by:
Marc Orr <marcorr@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Fixes: c992384b ("KVM: vmx: speed up MSR bitmap merge") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Marc Orr authored
The nested_vmx_prepare_msr_bitmap() function doesn't directly guard the x2APIC MSR intercepts with the "virtualize x2APIC mode" MSR. As a result, we discovered the potential for a buggy or malicious L1 to get access to L0's x2APIC MSRs, via an L2, as follows. 1. L1 executes WRMSR(IA32_SPEC_CTRL, 1). This causes the spec_ctrl variable, in nested_vmx_prepare_msr_bitmap() to become true. 2. L1 disables "virtualize x2APIC mode" in VMCS12. 3. L1 enables "APIC-register virtualization" in VMCS12. Now, KVM will set VMCS02's x2APIC MSR intercepts from VMCS12, and then set "virtualize x2APIC mode" to 0 in VMCS02. Oops. This patch closes the leak by explicitly guarding VMCS02's x2APIC MSR intercepts with VMCS12's "virtualize x2APIC mode" control. The scenario outlined above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Add leak scenario to virt_x2apic_mode_test". Note, it looks like this issue may have been introduced inadvertently during a merge---see 15303ba5. Signed-off-by:
Marc Orr <marcorr@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Rientjes authored
This ensures that the address and length provided to DBG_DECRYPT and DBG_ENCRYPT do not cause an overflow. At the same time, pass the actual number of pages pinned in memory to sev_unpin_memory() as a cleanup. Reported-by:
Cfir Cohen <cfir@google.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Rientjes authored
get_num_contig_pages() could potentially overflow int so make its type consistent with its usage. Reported-by:
Cfir Cohen <cfir@google.com> Cc: stable@vger.kernel.org Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mel/linuxLinus Torvalds authored
Pull mm/compaction fixes from Mel Gorman: "The merge window for 5.1 introduced a number of compaction-related patches. with intermittent reports of corruption and functional issues. The bugs are due to sloopy checking of zone boundaries and a corner case where invalid indexes are used to access the free lists. Reports are not common but at least two users and 0-day have tripped over them. There is a chance that one of the syzbot reports are related but it has not been confirmed properly. The normal submission path is with Andrew but there have been some delays and I consider them urgent enough that they should be picked up before RC4 to avoid duplicate reports. All of these have been successfully tested on older RC windows. This will make this branch look like a rebase but in fact, they've simply been lifted again from Andrew's tree and placed on a fresh branch. I've no reason to believe that this has invalidated the testing given the lack of change in compaction and the nature of the fixes" * tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux: mm/compaction.c: abort search if isolation fails mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints
-
Greg Kroah-Hartman authored
The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt (VMware) authored
After removing the start and count arguments of syscall_get_arguments() it seems reasonable to remove them from syscall_set_arguments(). Note, as of today, there are no users of syscall_set_arguments(). But we are told that there will be soon. But for now, at least make it consistent with syscall_get_arguments(). Link: http://lkml.kernel.org/r/20190327222014.GA32540@altlinux.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by:
Dmitry V. Levin <ldv@altlinux.org> Reported-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Pretty quiet week, just some amdgpu and i915 fixes. i915: - deadlock fix - gvt fixes amdgpu: - PCIE dpm feature fix - Powerplay fixes" * tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm: drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug drm/i915/gvt: Correct the calculation of plane size drm/amdgpu: remove unnecessary rlc reset function on gfx9 drm/i915: Always backoff after a drm_modeset_lock() deadlock drm/i915/gvt: do not let pin count of shadow mm go negative drm/i915/gvt: do not deliver a workload if its creation fails drm/amd/display: VBIOS can't be light up HDMI when restart system drm/amd/powerplay: fix possible hang with 3+ 4K monitors drm/amd/powerplay: correct data type to avoid overflow drm/amd/powerplay: add ECC feature bit drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several hash table refcount fixes in batman-adv, from Sven Eckelmann. 2) Use after free in bpf_evict_inode(), from Daniel Borkmann. 3) Fix mdio bus registration in ixgbe, from Ivan Vecera. 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni. 5) ila rhashtable corruption fix from Herbert Xu. 6) Don't allow upper-devices to be added to vrf devices, from Sabrina Dubroca. 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork. 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype, from Alexander Lobakin. 9) Missing IDR checks in mlx5 driver, from Aditya Pakki. 10) Fix false connection termination in ktls, from Jakub Kicinski. 11) Work around some ASPM issues with r8169 by disabling rx interrupt coalescing on certain chips. From Heiner Kallweit. 12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo Abeni. 13) Fully initialize sockaddr_in structures in SCTP, from Xin Long. 14) Various BPF flow dissector fixes from Stanislav Fomichev. 15) Divide by zero in act_sample, from Davide Caratti. 16) Fix bridging multicast regression introduced by rhashtable conversion, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) ibmvnic: Fix completion structure initialization ipv6: sit: reset ip header pointer in ipip6_rcv net: bridge: always clear mcast matching struct on reports and leaves libcxgb: fix incorrect ppmax calculation vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x sch_cake: Make sure we can write the IP header before changing DSCP bits sch_cake: Use tc_skb_protocol() helper for getting packet protocol tcp: Ensure DCTCP reacts to losses net/sched: act_sample: fix divide by zero in the traffic path net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop net: hns: Fix sparse: some warnings in HNS drivers net: hns: Fix WARNING when remove HNS driver with SMMU enabled net: hns: fix ICMP6 neighbor solicitation messages discard problem net: hns: Fix probabilistic memory overwrite when HNS driver initialized net: hns: Use NAPI_POLL_WEIGHT for hns driver net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() flow_dissector: rst'ify documentation ipv6: Fix dangling pointer when ipv6 fragment net-gro: Fix GRO flush when receiving a GSO packet. flow_dissector: document BPF flow dissector environment ...
-
Thomas Falcon authored
Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Tested-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "I dropped the ball a bit here: these patches should all probably have been part of rc2, but I wanted to get around to properly testing them in the various configurations (qemu32, qeum64, unleashed) first. Unfortunately I've been traveling and didn't have time to actually do that, but since these fix concrete bugs and pass my old set of tests I don't want to delay the fixes any longer. There are four independent fixes here: - A fix for the rv32 port that corrects the 64-bit user accesor's fixup label address. - A fix for a regression introduced during the merge window that broke medlow configurations at run time. This patch also includes a fix that disables ftrace for the same set of functions, which was found by inspection at the same time. - A modification of the memory map to avoid overlapping the FIXMAP and VMALLOC regions on systems with small memory maps. - A fix to the module handling code to use the correct syntax for probing Kconfig entries. These have passed my standard test flow, but I didn't have time to expand that testing like I said I would" * tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW) RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area RISC-V: Always compile mm/init.c with cmodel=medany and notrace riscv: fix accessing 8-byte variable from RV32
-
Nikolay Aleksandrov authored
We need to be careful and always zero the whole br_ip struct when it is used for matching since the rhashtable change. This patch fixes all the places which didn't properly clear it which in turn might've caused mismatches. Thanks for the great bug report with reproducing steps and bisection. Steps to reproduce (from the bug report): ip link add br0 type bridge mcast_querier 1 ip link set br0 up ip link add v2 type veth peer name v3 ip link set v2 master br0 ip link set v2 up ip link set v3 up ip addr add 3.0.0.2/24 dev v3 ip netns add test ip link add v1 type veth peer name v1 netns test ip link set v1 master br0 ip link set v1 up ip -n test link set v1 up ip -n test addr add 3.0.0.1/24 dev v1 # Multicast receiver ip netns exec test socat UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork - # Multicast sender echo hello | nc -u -s 3.0.0.2 224.224.224.224 5588 Reported-by: liam.mcbirnie@boeing.com Fixes: 19e3a9c9 ("net: bridge: convert multicast to generic rhashtable") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix up the intel_pstate driver after recent changes to prevent it from printing pointless messages and update the turbostat utility (mostly fixes and new hardware support). Specifics: - Make intel_pstate only load on Intel processors and prevent it from printing pointless failure messages (Borislav Petkov). - Update the turbostat utility: * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava). * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin Walton). * Support for Intel Icelake and for systems with more than one die per package (Len Brown). * Cleanups (Len Brown)" * tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq/intel_pstate: Load only on Intel hardware tools/power turbostat: update version number tools/power turbostat: Warn on bad ACPI LPIT data tools/power turbostat: Add checks for failure of fgets() and fscanf() tools/power turbostat: Also read package power on AMD F17h (Zen) tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL tools/power turbostat: Do not display an error on systems without a cpufreq driver tools/power turbostat: Add Die column tools/power turbostat: Add Icelake support tools/power turbostat: Cleanup CNL-specific code tools/power turbostat: Cleanup CC3-skip code tools/power turbostat: Restore ability to execute in topology-order
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Prevent stale GPE events from triggering spurious system wakeups from suspend-to-idle (Furquan Shaikh)" * tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clear status of GPEs before enabling them
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2019-04-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only one fix for DSC (backoff after drm_modeset_lock deadlock) and GVT's fixes including vGPU display plane size calculation, shadow mm pin count, error recovery path for workload create and one kerneldoc fix. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com
-