- 09 Nov, 2022 5 commits
-
-
Rakesh Sankaranarayanan authored
KSZ8563 have three port interrupts: PTP, PHY and ACL. Add port_nirq as 3 for KSZ8563 inside ksz_chip_data. Signed-off-by:
Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rakesh Sankaranarayanan authored
Add status validation for port register write inside lan937x_change_mtu. ksz_pwrite and ksz_pread api's are updated with return type int (Reference patch mentioned below). Update lan937x_change_mtu with status validation for ksz_pwrite16(). Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220826105634.3855578-6-o.rempel@pengutronix.de/Signed-off-by:
-
Rakesh Sankaranarayanan authored
add device irq in i2c probe function. Signed-off-by:
-
Rakesh Sankaranarayanan authored
Add KSZ9563 inside ksz_switch_chips structure with port_nirq as 3. KSZ9563 use KSZ9893 switch parameters but port_nirq count is 3 for KSZ9563 whereas 2 for KSZ9893. Add KSZ9563 inside ksz_switch_chips as a separate member and from device tree map compatible string into KSZ9563 inside ksz_spi.c and ksz9477_i2c.c. Global Chip ID 1 and 2 registers read value 9893, select sku based on Global Chip ID 4 Register which read 0x1c for KSZ9563. Signed-off-by:
-
Yoshihiro Shimoda authored
Coverity reported that the error path in rswitch_gwca_queue_alloc_skb() has an issue to cause endless loop. So, fix the issue by changing variables' types from u32 to int. After changed the types, rswitch_tx_free() should use rswitch_get_num_cur_queues() to calculate number of current queues. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527147 ("Control flow issues") Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221107081021.2955122-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 08 Nov, 2022 20 commits
-
-
Yang Li authored
Make the description of @policy to @p in nla_policy_len() to clear the below warnings: lib/nlattr.c:660: warning: Function parameter or member 'p' not described in 'nla_policy_len' lib/nlattr.c:660: warning: Excess function parameter 'policy' description in 'nla_policy_len' Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2736Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20221107062623.6709-1-yang.lee@linux.alibaba.comSigned-off-by:
-
Paolo Abeni authored
Michael Chan says: ==================== bnxt_en: Updates This small patchset adds an improvement to the configuration of ethtool RSS tuple hash and a PTP improvement when running in a multi-host environment. ==================== Link: https://lore.kernel.org/r/1667780192-3700-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Pavan Chebbi authored
When using a PHC that is shared between multiple hosts, in order to achieve consistent timestamps across all hosts, we need to isolate the PHC from any host making frequency adjustments. This patch adds a non-real time mode for this purpose. The implementation is based on a free running NIC hardware timer which is used as the timestamper time-base. Each host implements individual adjustments to a local timecounter based on the NIC free running timer. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Edwin Peer authored
Hardware is unable to realize all legal firmware interface state values for hash_type. For example, if 4-tuple TCP_IPV4 hash is enabled, 4-tuple UDP_IPV4 hash must also be enabled. By providing the bits the user intended to change instead of the possible illegal intermediate states, the firmware is able to make better compromises when deciding which bits to ignore. With this new mechansim, we can now report the actual configured hash back to the user. Add bnxt_hwrm_update_rss_hash_cfg() to report the actual hash after user configuration. Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
-
Edwin Peer authored
Extract common code into a new function. This will avoid duplication in the next patch, which changes the update algorithm for both the P5 and legacy code paths. No functional changes. Signed-off-by:
-
Paolo Abeni authored
Xin Long says: ==================== net: add helper support in tc act_ct for ovs offloading Ilya reported an issue that FTP traffic would be broken when the OVS flow with ct(commit,alg=ftp) installed in the OVS kernel module, and it was caused by that TC didn't support the ftp helper offloaded from OVS. This patchset is to add the helper support in act_ct for OVS offloading in kernel net/sched. The 1st and 2nd patches move some common code into nf_conntrack_helper from openvswitch so that they could be used by net/sched in the 4th patch (Note there are still some other common code used in both OVS and TC, and I will extract it in other patches). The 3rd patch extracts another function in net/sched to make the 4th patch easier to write. The 4th patch adds this feature in net/sched. The user space part will be added in another patch, and with it these OVS flows (FTP over SNAT) can be used to test this feature: table=0, in_port=veth1,tcp,tcp_dst=2121,ct_state=-trk \ actions=ct(table=1, nat), normal table=0, in_port=veth2,tcp,ct_state=-trk actions=ct(table=1, nat) table=0, in_port=veth1,tcp,ct_state=-trk actions=ct(table=0, nat) table=0, in_port=veth1,tcp,ct_state=+trk+rel actions=ct(commit, nat),normal table=0, in_port=veth1,tcp,ct_state=+trk+est actions=veth2" table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+new \ actions=ct(commit, nat(src=7.7.16.1), alg=ftp),normal" table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+est actions=veth2" table=1, in_port=veth2,tcp,ct_state=+trk+est actions=veth1" ==================== Link: https://lore.kernel.org/r/cover.1667766782.git.lucien.xin@gmail.comSigned-off-by: -
Xin Long authored
This patch is to add helper support in act_ct for OVS actions=ct(alg=xxx) offloading, which is corresponding to Commit cae3a262 ("openvswitch: Allow attaching helpers to ct action") in OVS kernel part. The difference is when adding TC actions family and proto cannot be got from the filter/match, other than helper name in tb[TCA_CT_HELPER_NAME], we also need to send the family in tb[TCA_CT_HELPER_FAMILY] and the proto in tb[TCA_CT_HELPER_PROTO] to kernel. Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to make the err path simple by calling tcf_ct_params_free(), so that it won't cause problems when more members are added into param and need freeing on the err path. Acked-by:
-
Xin Long authored
Move ovs_ct_add_helper from openvswitch to nf_conntrack_helper and rename as nf_ct_add_helper, so that it can be used in TC act_ct in the next patch. Acked-by:
-
Xin Long authored
Move ovs_ct_helper from openvswitch to nf_conntrack_helper and rename as nf_ct_helper so that it can be used in TC act_ct in the next patch. Note that it also adds the checks for the family and proto, as in TC act_ct, the packets with correct family and proto are not guaranteed. Acked-by:
-
Gal Pressman authored
Similar to what we do with the hash indirection table [1], when network flow classification rules are forwarding traffic to channels greater than the requested number of channels, fail the operation. Without this, traffic could be directed to channels which no longer exist (dropped) after changing number of channels. [1] commit d4ab4286 ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}") Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.comSigned-off-by:
-
Jakub Kicinski authored
The previous attempt to augment carrier_down (see Link) was not met with much enthusiasm so let's do the simple thing of exposing what some devices already maintain. Add a common ethtool statistic for link going down. Currently users have to maintain per-driver mapping to extract the right stat from the vendor-specific ethtool -S stats. carrier_down does not fit the bill because it counts a lot of software related false positives. Add the statistic to the extended link state API to steer vendors towards implementing all of it. Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly) enic also have a counter for this but I leave the implementation to their maintainers. Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.orgReviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jakub Kicinski authored
YueHaibing says: ==================== net: txgbe: Fix two bugs in txgbe_calc_eeprom_checksum Fix memleak and unsigned comparison bugs in txgbe_calc_eeprom_checksum ==================== Link: https://lore.kernel.org/r/20221105080722.20292-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
The error checks on checksum for a negative error return always fails because it is unsigned and can never be negative. Fixes: 049fe536 ("net: txgbe: Add operations to interact with firmware") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
eeprom_ptrs should be freed before returned. Fixes: 049fe536 ("net: txgbe: Add operations to interact with firmware") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-11-04 (ixgbe, ixgbevf, igb) This series contains updates to ixgbe, ixgbevf, and igb drivers. Daniel Willenson adjusts descriptor buffer limits to be based on what hardware supports instead of using a generic, least common value for ixgbe. Ani removes local variable for ixgbe, instead returning conditional result directly. Yang Li removes unneeded semicolon for ixgbe. Jan adds error messaging when VLAN errors are encountered for ixgbevf. Kees Cook prevents a potential use after free condition and explicitly rounds up q_vector allocations so that allocations can be correctly compared to ksize() for igb. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igb: Proactively round up to kmalloc bucket size igb: Do not free q_vector unless new one was allocated ixgbevf: Add error messages on vlan error ixgbe: Remove unneeded semicolon ixgbe: Remove local variable ixgbe: change MAX_RXD/MAX_TXD based on adapter type ==================== Reviewed-by:
-
Tao Chen authored
Fix coverity issue 'Resource leak'. We should clean the skb resource if nlmsg_put/append failed. Fixes: 738136a0 ("netlink: split up copies in the ack construction") Signed-off-by:
Tao Chen <chentao.kernel@linux.alibaba.com> Link: https://lore.kernel.org/r/bff442d62c87de6299817fe1897cc5a5694ba9cc.1667638204.git.chentao.kernel@linux.alibaba.comSigned-off-by:
-
Roman Gushchin authored
Implement live mac addr change for the macb ethernet driver. Signed-off-by:
Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by:
-
Russell King (Oracle) authored
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
lan966x_phylink.c doesn't make use of anything from linux/sfp.h, so remove this unnecessary include. Signed-off-by:
-
- 07 Nov, 2022 15 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== genetlink: support per op type policies While writing new genetlink families I was increasingly annoyed by the fact that we don't support different policies for do and dump callbacks. This makes it hard to do proper input validation for dumps which usually have a lot more narrow range of accepted attributes. There is also a minor inconvenience of not supporting different per_doit and post_doit callbacks per op. This series addresses those problems by introducing another op format. v3: - minor fixes to patch 12 after I took it for a spin with a real family - adjust commit msg in patch 8 v2: https://lore.kernel.org/all/20221102213338.194672-1-kuba@kernel.org/ - wait for net changes to propagate - restore the missing comment in patch 1 - drop extra space in patch 3 - improve commit message in patch 4 v1: https://lore.kernel.org/all/20221018230728.1039524-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Prove that the split ops work. Sadly we need to keep bug-wards compatibility and specify the same policy for dump as do, even tho we don't parse inputs for the dump. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Let families to hook in the new split ops. They are more flexible and should not be much larger than full ops. Each split op is 40B while full op is 48B. Devlink for example has 54 dos and 19 dumps, 2 of the dumps do not have a do -> 56 full commands = 2688B. Split ops would have taken 2920B, so 9% more space while allowing individual per/post doit and per-type policies. Signed-off-by:
-
Jakub Kicinski authored
All dumpers use the iterators now, inline the cmd by index stuff into iterator code. Reviewed-by:
-
Jakub Kicinski authored
We can't put the full iterator in the struct ctrl_dump_policy_ctx because dump context is statically sized by netlink core. Allocate it dynamically. Rename policy to dump_map to make the logic a little easier to follow. Signed-off-by:
-
Jakub Kicinski authored
Subsequent changes will expose split op structures to users, so walking the family ops with just an index will get harder. Add a structured iterator, convert the simple cases. Policy dumping needs more careful conversion. Signed-off-by:
-
Jakub Kicinski authored
All callers go via genl_get_cmd_split() now, so rename it to genl_get_cmd() remove the original. Reviewed-by:
-
Jakub Kicinski authored
Pass do and dump versions of the op to ctrl_dumppolicy_put_op() so that it can provide a different policy index for the two. Since we now look at policies, and those are set appropriately there's no need to look at the GENL_DONT_VALIDATE_DUMP flag. Signed-off-by:
-
Jakub Kicinski authored
Separate adding doit and dumpit policies for CTRL_CMD_GETPOLICY. This has no effect until we actually allow do and dump to come from different sources as netlink_policy_dump_add_policy() does deduplication. Signed-off-by:
-
Jakub Kicinski authored
Now that genl_get_cmd_split() is informed what type of callback user is trying to access (do or dump) we can check that this callback is indeed available and return an error early. Signed-off-by:
-
Jakub Kicinski authored
Set the policy and maxattr pointers based on validation flags. genl_family_rcv_msg_attrs_parse() will do nothing and return NULL if maxattrs is zero, so no behavior change is expected. Signed-off-by:
-
Jakub Kicinski authored
We currently have two forms of operations - small ops and "full" ops (or just ops). The former does not have pointers for some of the less commonly used features (namely dump start/done and policy). The "full" ops, however, still don't contain all the necessary information. In particular the policy is per command ID, while do and dump often accept different attributes. It's also not possible to define different pre_doit and post_doit callbacks for different commands within the family. At the same time a lot of commands do not support dumping and therefore all the dump-related information is wasted space. Create a new command representation which can hold info about a do implementation or a dump implementation, but not both at the same time. Use this new representation on the command execution path (genl_family_rcv_msg) as we either run a do or a dump and don't have to create a "full" op there. Signed-off-by:
-
Jakub Kicinski authored
Move the private fields down to form a "private section". Use the kdoc "private:" label comment thing to hide them from the main kdoc comment. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Jakub Kicinski authored
The code at the top of ctrl_dumppolicy() dumps mappings between ops and policies. It supports dumping both the entire family and single op if dump is filtered. But both of those cases are handled inside a loop, which makes the logic harder to follow and change. Refactor to split the two cases more clearly. Signed-off-by:
-
David S. Miller authored
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: Add suspend/resume support This series enables PM_SLEEP(suspend/resume) support to the am65-cpsw network driver. Dual-emac and Switch mode are tested to work with suspend/resume on AM62-SK platform. It can be verified on the following branch https://github.com/rogerq/linux/commits/for-v6.2/am62-cpsw-lpm-1.0 ==================== Signed-off-by:
-
