commit 6934da92 upstream.

There is a use-after-free possibility in __ext4_journal_stop() in the
case that we free the handle in the first jbd2_journal_stop() because
we're referencing handle->h_err afterwards. This was introduced in
9705acd6 and it is wrong. Fix it by
storing the handle->h_err value beforehand and avoid referencing
potentially freed handle.

Fixes: 9705acd6Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 33d14975 upstream.

Unlike comments and expectation of callers journal_clean_one_cp_list()
returned 1 not only if it freed the transaction but also if it freed
some buffers in the transaction. That could make
__jbd2_journal_clean_checkpoint_list() skip processing
t_checkpoint_io_list and continue with processing the next transaction.
This is mostly a cosmetic issue since the only result is we can
sometimes free less memory than we could. But it's still worth fixing.
Fix journal_clean_one_cp_list() to return 1 only if the transaction was
really freed.

Fixes: 50849db3Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 0305cd5f upstream.

When truncating a file to a smaller size which consists of an inline
extent that is compressed, we did not discard (or made unusable) the
data between the new file size and the old file size, wasting metadata
space and allowing for the truncated data to be leaked and the data
corruption/loss mentioned below.
We were also not correctly decrementing the number of bytes used by the
inode, we were setting it to zero, giving a wrong report for callers of
the stat(2) syscall. The fsck tool also reported an error about a mismatch
between the nbytes of the file versus the real space used by the file.

Now because we weren't discarding the truncated region of the file, it
was possible for a caller of the clone ioctl to actually read the data
that was truncated, allowing for a security breach without requiring root
access to the system, using only standard filesystem operations. The
scenario is the following:

   1) User A creates a file which consists of an inline and compressed
      extent with a size of 2000 bytes - the file is not accessible to
      any other users (no read, write or execution permission for anyone
      else);

   2) The user truncates the file to a size of 1000 bytes;

   3) User A makes the file world readable;

   4) User B creates a file consisting of an inline extent of 2000 bytes;

   5) User B issues a clone operation from user A's file into its own
      file (using a length argument of 0, clone the whole range);

   6) User B now gets to see the 1000 bytes that user A truncated from
      its file before it made its file world readbale. User B also lost
      the bytes in the range [1000, 2000[ bytes from its own file, but
      that might be ok if his/her intention was reading stale data from
      user A that was never supposed to be public.

Note that this contrasts with the case where we truncate a file from 2000
bytes to 1000 bytes and then truncate it back from 1000 to 2000 bytes. In
this case reading any byte from the range [1000, 2000[ will return a value
of 0x00, instead of the original data.

This problem exists since the clone ioctl was added and happens both with
and without my recent data loss and file corruption fixes for the clone
ioctl (patch "Btrfs: fix file corruption and data loss after cloning
inline extents").

So fix this by truncating the compressed inline extents as we do for the
non-compressed case, which involves decompressing, if the data isn't already
in the page cache, compressing the truncated version of the extent, writing
the compressed content into the inline extent and then truncate it.

The following test case for fstests reproduces the problem. In order for
the test to pass both this fix and my previous fix for the clone ioctl
that forbids cloning a smaller inline extent into a larger one,
which is titled "Btrfs: fix file corruption and data loss after cloning
inline extents", are needed. Without that other fix the test fails in a
different way that does not leak the truncated data, instead part of
destination file gets replaced with zeroes (because the destination file
has a larger inline extent than the source).

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _scratch_mount "-o compress"

  # Create our test files. File foo is going to be the source of a clone operation
  # and consists of a single inline extent with an uncompressed size of 512 bytes,
  # while file bar consists of a single inline extent with an uncompressed size of
  # 256 bytes. For our test's purpose, it's important that file bar has an inline
  # extent with a size smaller than foo's inline extent.
  $XFS_IO_PROG -f -c "pwrite -S 0xa1 0 128"   \
          -c "pwrite -S 0x2a 128 384" \
          $SCRATCH_MNT/foo | _filter_xfs_io
  $XFS_IO_PROG -f -c "pwrite -S 0xbb 0 256" $SCRATCH_MNT/bar | _filter_xfs_io

  # Now durably persist all metadata and data. We do this to make sure that we get
  # on disk an inline extent with a size of 512 bytes for file foo.
  sync

  # Now truncate our file foo to a smaller size. Because it consists of a
  # compressed and inline extent, btrfs did not shrink the inline extent to the
  # new size (if the extent was not compressed, btrfs would shrink it to 128
  # bytes), it only updates the inode's i_size to 128 bytes.
  $XFS_IO_PROG -c "truncate 128" $SCRATCH_MNT/foo

  # Now clone foo's inline extent into bar.
  # This clone operation should fail with errno EOPNOTSUPP because the source
  # file consists only of an inline extent and the file's size is smaller than
  # the inline extent of the destination (128 bytes < 256 bytes). However the
  # clone ioctl was not prepared to deal with a file that has a size smaller
  # than the size of its inline extent (something that happens only for compressed
  # inline extents), resulting in copying the full inline extent from the source
  # file into the destination file.
  #
  # Note that btrfs' clone operation for inline extents consists of removing the
  # inline extent from the destination inode and copy the inline extent from the
  # source inode into the destination inode, meaning that if the destination
  # inode's inline extent is larger (N bytes) than the source inode's inline
  # extent (M bytes), some bytes (N - M bytes) will be lost from the destination
  # file. Btrfs could copy the source inline extent's data into the destination's
  # inline extent so that we would not lose any data, but that's currently not
  # done due to the complexity that would be needed to deal with such cases
  # (specially when one or both extents are compressed), returning EOPNOTSUPP, as
  # it's normally not a very common case to clone very small files (only case
  # where we get inline extents) and copying inline extents does not save any
  # space (unlike for normal, non-inlined extents).
  $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar

  # Now because the above clone operation used to succeed, and due to foo's inline
  # extent not being shinked by the truncate operation, our file bar got the whole
  # inline extent copied from foo, making us lose the last 128 bytes from bar
  # which got replaced by the bytes in range [128, 256[ from foo before foo was
  # truncated - in other words, data loss from bar and being able to read old and
  # stale data from foo that should not be possible to read anymore through normal
  # filesystem operations. Contrast with the case where we truncate a file from a
  # size N to a smaller size M, truncate it back to size N and then read the range
  # [M, N[, we should always get the value 0x00 for all the bytes in that range.

  # We expected the clone operation to fail with errno EOPNOTSUPP and therefore
  # not modify our file's bar data/metadata. So its content should be 256 bytes
  # long with all bytes having the value 0xbb.
  #
  # Without the btrfs bug fix, the clone operation succeeded and resulted in
  # leaking truncated data from foo, the bytes that belonged to its range
  # [128, 256[, and losing data from bar in that same range. So reading the
  # file gave us the following content:
  #
  # 0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
  # *
  # 0000200 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a
  # *
  # 0000400
  echo "File bar's content after the clone operation:"
  od -t x1 $SCRATCH_MNT/bar

  # Also because the foo's inline extent was not shrunk by the truncate
  # operation, btrfs' fsck, which is run by the fstests framework everytime a
  # test completes, failed reporting the following error:
  #
  #  root 5 inode 257 errors 400, nbytes wrong

  status=0
  exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit d14053b3 upstream.

The VT-d specification says that "Software must enable ATS on endpoint
devices behind a Root Port only if the Root Port is reported as
supporting ATS transactions."

We walk up the tree to find a Root Port, but for integrated devices we
don't find one — we get to the host bridge. In that case we *should*
allow ATS. Currently we don't, which means that we are incorrectly
failing to use ATS for the integrated graphics. Fix that.

We should never break out of this loop "naturally" with bus==NULL,
since we'll always find bridge==NULL in that case (and now return 1).

So remove the check for (!bridge) after the loop, since it can never
happen. If it did, it would be worthy of a BUG_ON(!bridge). But since
it'll oops anyway in that case, that'll do just as well.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 696d8b70 upstream.

In case when the interrupt happened for the second eDMA the channel
number was incorrectly passed to the client driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 8039d87d upstream.

Currently the clone ioctl allows to clone an inline extent from one file
to another that already has other (non-inlined) extents. This is a problem
because btrfs is not designed to deal with files having inline and regular
extents, if a file has an inline extent then it must be the only extent
in the file and must start at file offset 0. Having a file with an inline
extent followed by regular extents results in EIO errors when doing reads
or writes against the first 4K of the file.

Also, the clone ioctl allows one to lose data if the source file consists
of a single inline extent, with a size of N bytes, and the destination
file consists of a single inline extent with a size of M bytes, where we
have M > N. In this case the clone operation removes the inline extent
from the destination file and then copies the inline extent from the
source file into the destination file - we lose the M - N bytes from the
destination file, a read operation will get the value 0x00 for any bytes
in the the range [N, M] (the destination inode's i_size remained as M,
that's why we can read past N bytes).

So fix this by not allowing such destructive operations to happen and
return errno EOPNOTSUPP to user space.

Currently the fstest btrfs/035 tests the data loss case but it totally
ignores this - i.e. expects the operation to succeed and does not check
the we got data loss.

The following test case for fstests exercises all these cases that result
in file corruption and data loss:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner
  _require_btrfs_fs_feature "no_holes"
  _require_btrfs_mkfs_feature "no-holes"

  rm -f $seqres.full

  test_cloning_inline_extents()
  {
      local mkfs_opts=$1
      local mount_opts=$2

      _scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # File bar, the source for all the following clone operations, consists
      # of a single inline extent (50 bytes).
      $XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
          | _filter_xfs_io

      # Test cloning into a file with an extent (non-inlined) where the
      # destination offset overlaps that extent. It should not be possible to
      # clone the inline extent from file bar into this file.
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo

      # Doing IO against any range in the first 4K of the file should work.
      # Due to a past clone ioctl bug which allowed cloning the inline extent,
      # these operations resulted in EIO errors.
      echo "File foo data after clone operation:"
      # All bytes should have the value 0xaa (clone operation failed and did
      # not modify our file).
      od -t x1 $SCRATCH_MNT/foo
      $XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io

      # Test cloning the inline extent against a file which has a hole in its
      # first 4K followed by a non-inlined extent. It should not be possible
      # as well to clone the inline extent from file bar into this file.
      $XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2

      # Doing IO against any range in the first 4K of the file should work.
      # Due to a past clone ioctl bug which allowed cloning the inline extent,
      # these operations resulted in EIO errors.
      echo "File foo2 data after clone operation:"
      # All bytes should have the value 0x00 (clone operation failed and did
      # not modify our file).
      od -t x1 $SCRATCH_MNT/foo2
      $XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io

      # Test cloning the inline extent against a file which has a size of zero
      # but has a prealloc extent. It should not be possible as well to clone
      # the inline extent from file bar into this file.
      $XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3

      # Doing IO against any range in the first 4K of the file should work.
      # Due to a past clone ioctl bug which allowed cloning the inline extent,
      # these operations resulted in EIO errors.
      echo "First 50 bytes of foo3 after clone operation:"
      # Should not be able to read any bytes, file has 0 bytes i_size (the
      # clone operation failed and did not modify our file).
      od -t x1 $SCRATCH_MNT/foo3
      $XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io

      # Test cloning the inline extent against a file which consists of a
      # single inline extent that has a size not greater than the size of
      # bar's inline extent (40 < 50).
      # It should be possible to do the extent cloning from bar to this file.
      $XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4

      # Doing IO against any range in the first 4K of the file should work.
      echo "File foo4 data after clone operation:"
      # Must match file bar's content.
      od -t x1 $SCRATCH_MNT/foo4
      $XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io

      # Test cloning the inline extent against a file which consists of a
      # single inline extent that has a size greater than the size of bar's
      # inline extent (60 > 50).
      # It should not be possible to clone the inline extent from file bar
      # into this file.
      $XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5

      # Reading the file should not fail.
      echo "File foo5 data after clone operation:"
      # Must have a size of 60 bytes, with all bytes having a value of 0x03
      # (the clone operation failed and did not modify our file).
      od -t x1 $SCRATCH_MNT/foo5

      # Test cloning the inline extent against a file which has no extents but
      # has a size greater than bar's inline extent (16K > 50).
      # It should not be possible to clone the inline extent from file bar
      # into this file.
      $XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6

      # Reading the file should not fail.
      echo "File foo6 data after clone operation:"
      # Must have a size of 16K, with all bytes having a value of 0x00 (the
      # clone operation failed and did not modify our file).
      od -t x1 $SCRATCH_MNT/foo6

      # Test cloning the inline extent against a file which has no extents but
      # has a size not greater than bar's inline extent (30 < 50).
      # It should be possible to clone the inline extent from file bar into
      # this file.
      $XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7

      # Reading the file should not fail.
      echo "File foo7 data after clone operation:"
      # Must have a size of 50 bytes, with all bytes having a value of 0xbb.
      od -t x1 $SCRATCH_MNT/foo7

      # Test cloning the inline extent against a file which has a size not
      # greater than the size of bar's inline extent (20 < 50) but has
      # a prealloc extent that goes beyond the file's size. It should not be
      # possible to clone the inline extent from bar into this file.
      $XFS_IO_PROG -f -c "falloc -k 0 1M" \
                      -c "pwrite -S 0x88 0 20" \
                      $SCRATCH_MNT/foo8 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8

      echo "File foo8 data after clone operation:"
      # Must have a size of 20 bytes, with all bytes having a value of 0x88
      # (the clone operation did not modify our file).
      od -t x1 $SCRATCH_MNT/foo8

      _scratch_unmount
  }

  echo -e "\nTesting without compression and without the no-holes feature...\n"
  test_cloning_inline_extents

  echo -e "\nTesting with compression and without the no-holes feature...\n"
  test_cloning_inline_extents "" "-o compress"

  echo -e "\nTesting without compression and with the no-holes feature...\n"
  test_cloning_inline_extents "-O no-holes" ""

  echo -e "\nTesting with compression and with the no-holes feature...\n"
  test_cloning_inline_extents "-O no-holes" "-o compress"

  status=0
  exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 0ad95472 upstream.

Commit cb7323ff ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called => NSM rpc client created,
	nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
	dereference of *ln->nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 35a92fe8 upstream.

Andrew was seeing a race occur when an OPEN and OPEN_DOWNGRADE were
running in parallel. The server would receive the OPEN_DOWNGRADE first
and check its seqid, but then an OPEN would race in and bump it. The
OPEN_DOWNGRADE would then complete and bump the seqid again.  The result
was that the OPEN_DOWNGRADE would be applied after the OPEN, even though
it should have been rejected since the seqid changed.

The only recourse we have here I think is to serialize operations that
bump the seqid in a stateid, particularly when we're given a seqid in
the call. To address this, we add a new rw_semaphore to the
nfs4_ol_stateid struct. We do a down_write prior to checking the seqid
after looking up the stateid to ensure that nothing else is going to
bump it while we're operating on it.

In the case of OPEN, we do a down_read, as the call doesn't contain a
seqid. Those can run in parallel -- we just need to serialize them when
there is a concurrent OPEN_DOWNGRADE or CLOSE.

LOCK and LOCKU however always take the write lock as there is no
opportunity for parallelizing those.
Reported-and-Tested-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ kamal: backport to 3.19-stable: context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit bc27a539 upstream.

Writing invalid command to QSPI_SPI_CMD_REG will terminate current
transfer and de-assert the chip select. This has to be done before
calling spi_finalize_current_message(). Because
spi_finalize_current_message() will mark the end of current message
transfer and schedule the next transfer. If the chipselect is not
de-asserted before calling spi_finalize_current_message() then the next
transfer will overlap with the previous transfer leading to data
corruption.
__spi_pump_message() can be called either from kthread worker context or
directly from the calling process's context. It is possible that these
two calls can race against each other. But race is serialized by
checking whether master->cur_msg == NULL (pointer to msg being handled
by transfer_one() at present). The master->cur_msg is set to NULL when
spi_finalize_current_message() is called on that message, which means
calling spi_finalize_current_message() allows __spi_sync() to pump next
message in calling process context.
Now if spi-ti-qspi calls spi_finalize_current_message() before we
terminate transfer at hardware side, if __spi_pump_message() is called
from process context then the successive transactions can overlap.

Fix this by moving writing invalid command to QSPI_SPI_CMD_REG to
before calling spi_finalize_current_message() call.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit ec791d14 upstream.

Add a quirk to clear the GUSB2PHYCFG.ENBLSLPM bit, which controls
whether the PHY receives the suspend signal from the controller.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 690fb371 upstream.

This patch allows the dwc3 driver to run on the new Synopsys USB 3.1
IP core, albeit in USB 3.0 mode only.

The Synopsys USB 3.1 IP (DWC_usb31) retains mostly the same register
interface and programming model as the existing USB 3.0 controller IP
(DWC_usb3). However the GSNPSID and version numbers are different.

Add checking for the new ID to pass driver probe.

Also, since the DWC_usb31 version number is lower in value than the
full GSNPSID of the DWC_usb3 IP, we set the high bit to identify
DWC_usb31 and to ensure the values are higher.

Finally, add a documentation note about the revision numbering scheme.
Any future revision checks (for STARS, workarounds, and new features)
should take into consideration how it applies to both the 3.1/3.0 IP.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit e8095a25 upstream.

This adds the PCI product ID for the Synopsys USB 3.1 IP core
(DWC_usb31) on a HAPS-based PCI development platform.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 41adc59c upstream.

This ID is for the Synopsys DWC_usb3 core with AXI interface on PCIe
HAPS platform. This core has the debug registers mapped at a separate
BAR in order to support enhanced hibernation.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 72e1eed8 upstream.

If IMA_LOAD_X509 is enabled, either directly or indirectly via
IMA_APPRAISE_SIGNED_INIT, certificates are loaded onto the IMA
trusted keyring by the kernel via key_create_or_update(). When
the KEY_ALLOC_TRUSTED flag is provided, certificates are loaded
without first verifying the certificate is properly signed by a
trusted key on the system keyring.  This patch removes the
KEY_ALLOC_TRUSTED flag.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 7e312103 upstream.

IOMMU-based dma_mmap() implementation lacked proper support for offset
parameter used in mmap call (it always assumed that mapping starts from
offset zero). This patch adds support for offset parameter to IOMMU-based
implementation.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 371f0f08 upstream.

dma_mmap() function in IOMMU-based dma-mapping implementation lacked
a check for valid range of mmap parameters (offset and buffer size), what
might have caused access beyond the allocated buffer. This patch fixes
this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit e77b675f upstream.

Commit 72daceb9 ("net: rfkill: gpio: Add default GPIO driver mappings
for ACPI") removed possibility to request GPIO by table index for non-ACPI
platforms without changing its users. As result "shutdown" GPIO request
will fail if request for "reset" GPIO succeeded or "reset" will be
requested instead of "shutdown" if "reset" wasn't defined. Fix it by
making gpiod_lookup_table use con_id's instead of indexes.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: 72daceb9 (net: rfkill: gpio: Add default GPIO driver mappings for ACPI)
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit a8077734 upstream.

When trying to use v4l2_ctrl_g_ctrl_int64() to retrieve a
V4L2_CTRL_TYPE_INTEGER64 type value the internal helper function
get_ctrl() would prematurely exit because for this control type
the 'is_int' flag is not set. This would result in v4l2_ctrl_g_ctrl_int64
always returning 0.

Also v4l2_ctrl_g_ctrl_int64() is reading and returning the 32bit value
member instead of the 64bit version, so fixing that as well.

This patch extends the condition check to allow the V4L2_CTRL_TYPE_INTEGER64
type to continue processing instead of exiting.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 35204e2e upstream.

Array controls weren't skipped when only V4L2_CTRL_FLAG_NEXT_CTRL was
provided (so no V4L2_CTRL_FLAG_NEXT_COMPOUND was set). This is wrong
since arrays are also considered compound controls (i.e. with more than
one value), and applications that do not know about arrays will not
be able to handle such controls.

Fix the test to include arrays.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b2f73922 upstream.

So the /proc/PID/stat 'wchan' field (the 30th field, which contains
the absolute kernel address of the kernel function a task is blocked in)
leaks absolute kernel addresses to unprivileged user-space:

        seq_put_decimal_ull(m, ' ', wchan);

The absolute address might also leak via /proc/PID/wchan as well, if
KALLSYMS is turned off or if the symbol lookup fails for some reason:

static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns,
                          struct pid *pid, struct task_struct *task)
{
        unsigned long wchan;
        char symname[KSYM_NAME_LEN];

        wchan = get_wchan(task);

        if (lookup_symbol_name(wchan, symname) < 0) {
                if (!ptrace_may_access(task, PTRACE_MODE_READ))
                        return 0;
                seq_printf(m, "%lu", wchan);
        } else {
                seq_printf(m, "%s", symname);
        }

        return 0;
}

This isn't ideal, because for example it trivially leaks the KASLR offset
to any local attacker:

  fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35)
  ffffffff8123b380

Most real-life uses of wchan are symbolic:

  ps -eo pid:10,tid:10,wchan:30,comm

and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat:

  triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1
  open("/proc/30833/wchan", O_RDONLY)     = 6

There's one compatibility quirk here: procps relies on whether the
absolute value is non-zero - and we can provide that functionality
by outputing "0" or "1" depending on whether the task is blocked
(whether there's a wchan address).

These days there appears to be very little legitimate reason
user-space would be interested in  the absolute address. The
absolute address is mostly historic: from the days when we
didn't have kallsyms and user-space procps had to do the
decoding itself via the System.map.

So this patch sets all numeric output to "0" or "1" and keeps only
symbolic output, in /proc/PID/wchan.

( The absolute sleep address can generally still be profiled via
  perf, by tasks with sufficient privileges. )
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
[ kamal: backport to 3.19-stable: proc_pid_wchan context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit e5bae867 upstream.

If we fail to allocate a partition structure in the middle of the partition
creation process, the already allocated partitions are never removed, which
means they are still present in the partition list and their resources are
never freed.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 2502d0ef upstream.

The CPU_MAP register is duplicated for each CPUs at different addresses,
each instance being at a different address.

However, the code so far was using CONFIG_NR_CPUS to initialise the CPU_MAP
registers for each registers, while the SoCs embed at most 4 CPUs.

This is especially an issue with multi_v7_defconfig, where CONFIG_NR_CPUS
is currently set to 16, resulting in writes to registers that are not
CPU_MAP.

Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 655e9780 upstream.

Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match
compatible ioctls on ARM64 kernels without breaking AMD64 some fields
should be aligned using compat_s64 type and in one case struct should be
unpacked.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
[hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 79b568b9 upstream.

hid_connect adds various strings to the buffer but they're all
conditional. You can find circumstances where nothing would be written
to it but the kernel will still print the supposedly empty buffer with
printk. This leads to corruption on the console/in the logs.

Ensure buf is initialized to an empty string.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[dvhart: Initialize string to "" rather than assign buf[0] = NULL;]
Cc: Jiri Kosina <jikos@kernel.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit d69bbf88 ]

Only cpu seeing dst refcount going to 0 can safely
dereference dst->flags.

Otherwise an other cpu might already have freed the dst.

Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 30f7ea1c ]

There is a race conditions between packet_notifier and packet_bind{_spkt}.

It happens if packet_notifier(NETDEV_UNREGISTER) executes between the
time packet_bind{_spkt} takes a reference on the new netdevice and the
time packet_do_bind sets po->ifindex.
In this case the notification can be missed.
If this happens during a dev_change_net_namespace this can result in the
netdevice to be moved to the new namespace while the packet_sock in the
old namespace still holds a reference on it. When the netdevice is later
deleted in the new namespace the deletion hangs since the packet_sock
is not found in the new namespace' &net->packet.sklist.
It can be reproduced with the script below.

This patch makes packet_do_bind check again for the presence of the
netdevice in the packet_sock's namespace after the synchronize_net
in unregister_prot_hook.
More in general it also uses the rcu lock for the duration of the bind
to stop dev_change_net_namespace/rollback_registered_many from
going past the synchronize_net following unlist_netdevice, so that
no NETDEV_UNREGISTER notifications can happen on the new netdevice
while the bind is executing. In order to do this some code from
packet_bind{_spkt} is consolidated into packet_do_dev.

import socket, os, time, sys
proto=7
realDev='em1'
vlanId=400
if len(sys.argv) > 1:
   vlanId=int(sys.argv[1])
dev='vlan%d' % vlanId

os.system('taskset -p 0x10 %d' % os.getpid())

s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto)
os.system('ip link add link %s name %s type vlan id %d' %
          (realDev, dev, vlanId))
os.system('ip netns add dummy')

pid=os.fork()

if pid == 0:
   # dev should be moved while packet_do_bind is in synchronize net
   os.system('taskset -p 0x20000 %d' % os.getpid())
   os.system('ip link set %s netns dummy' % dev)
   os.system('ip netns exec dummy ip link del %s' % dev)
   s.close()
   sys.exit(0)

time.sleep(.004)
try:
   s.bind(('%s' % dev, proto+1))
except:
   print 'Could not bind socket'
   s.close()
   os.system('ip netns del dummy')
   sys.exit(0)

os.waitpid(pid, 0)
s.close()
os.system('ip netns del dummy')
sys.exit(0)
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 4ee3bd4a ]

This fixes the following lockdep warning:

 [ INFO: inconsistent lock state ]
 4.3.0-rc7+ #1197 Not tainted
 ---------------------------------
 inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage.
 sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes:
  (&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a
 {IN-SOFTIRQ-R} state was registered at:
   [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0
   [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4
   [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae
   [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116
   [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a
   [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5
   [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465
   [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633
   [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15
   [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d
   [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f
   [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e
   [<ffffffff8195bfef>] ip6_output+0x91/0xe5
   [<ffffffff819792ae>] dst_output_sk+0x47/0x4c
   [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82
   [<ffffffff8197981e>] mld_sendpack+0x189/0x266
   [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223
   [<ffffffff810de581>] call_timer_fn+0xfb/0x28c
   [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1

Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 2a189f9e ]

In ipv6_add_dev, when addrconf_sysctl_register fails, we do not clean up
the dev_snmp6 entry that we have already registered for this device.
Call snmp6_unregister_dev in this case.

Fixes: a317a2f1 ("ipv6: fail early when creating netdev named all or default")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 8fa677d2 ]

Under low memory conditions, tcp_sk_init() and icmp_sk_init()
can both iterate on all possible cpus and call inet_ctl_sock_destroy(),
with eventual NULL pointer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit b2663a4f ]

When the IP stack passes SKBs the sfc driver puts them in 2 different TX
queues (called partners), one for checksummed and one for not checksummed.
If the SKB has xmit_more set the driver will delay pushing the work to the
NIC.

When later it does decide to push the buffers this patch ensures it also
pushes the partner queue, if that also has any delayed work. Before this
fix the work in the partner queue would be left for a long time and cause
a netdev watchdog.

Fixes: 70b33fb0 ("sfc: add support for skb->xmit_more")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 4ece9009 ]

sit0 device allocates its percpu storage twice :
- One time in ipip6_tunnel_init()
- One time in ipip6_fb_tunnel_init()

Thus we leak 48 bytes per possible cpu per network namespace dismantle.

ipip6_fb_tunnel_init() can be much simpler and does not
return an error, and should be called after register_netdev()

Note that ipip6_tunnel_clone_6rd() also needs to be called
after register_netdev() (calling ipip6_tunnel_init())

Fixes: ebe084aa ("sit: Use ipip6_tunnel_init as the ndo_init function.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 70910791 ]

The lt4112 is a HP branded Huawei me906e modem. Like other Huawei
modems, it does not have a fixed interface to function mapping.
Instead it uses a Huawei specific scheme: functions are mapped by
subclass and protocol.

However, the HP vendor ID is used for modems from many different
manufacturers using different schemes, so we cannot apply a generic
vendor rule like we do for the Huawei vendor ID.

Replace the previous lt4112 entry pointing to an arbitrary interface
number with a device specific subclass + protocol match.
Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch>
Tested-by: Martin Hauke <mardnh@gmx.de>
Fixes: bb2bdeb8 ("qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 44f49dd8 ]

Fixes the following kernel BUG :

BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758
caller is __this_cpu_preempt_check+0x13/0x15
CPU: 0 PID: 2758 Comm: bash Tainted: P           O   3.18.19 #2
 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000
 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800
 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8
Call Trace:
[<ffffffff81482b2a>] dump_stack+0x52/0x80
[<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1
[<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15
[<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c
[<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e
[<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c
[<ffffffff810553fc>] ? get_parent_ip+0x11/0x42
[<ffffffff810e6974>] ? pollwake+0x4d/0x51
[<ffffffff81058ac0>] ? default_wake_function+0x0/0xf
[<ffffffff810553fc>] ? get_parent_ip+0x11/0x42
[<ffffffff810613d9>] ? __wake_up_common+0x45/0x77
[<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32
[<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53
[<ffffffff8139a519>] ? sock_def_readable+0x71/0x75
[<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55
[<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41
[<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86
[<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d
[<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b
[<ffffffff810d5738>] ? new_sync_read+0x82/0xaa
[<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99
[<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32
[<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f
[<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf
[<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3
[<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e
Signed-off-by: Ani Sinha <ani@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit e6dbe1eb ]

priv->hwts_*_en indicate if timestamping is enabled/disabled at run
time. But  priv->dma_cap.time_stamp  and priv->dma_cap.atime_stamp
indicates HW is support for PTPv1/PTPv2.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 8ce675ff ]

Either of pskb_pull() or pskb_trim() may fail under low memory conditions.
If rds_tcp_data_recv() ignores such failures, the application will
receive corrupted data because the skb has not been correctly
carved to the RDS datagram size.

Avoid this by handling pskb_pull/pskb_trim failure in the same
manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and
retry via the deferred call to rds_send_worker() that gets set up on
ENOMEM from rds_tcp_read_sock()
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit f23d538b ]

We don't have fraglist support in TAP_FEATURES. This will lead
software segmentation of gro skb with frag list. Fixes by having
frag list support in TAP_FEATURES.

With this patch single session of netperf receiving were restored from
about 5Gb/s to about 12Gb/s on mlx4.

Fixes a567dd62 ("macvtap: simplify usage of tap_features")
Cc: Vlad Yasevich <vyasevic@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 0db65fcf ]

New device IDs shamelessly lifted from the vendor driver.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 45c8b7b1 ]

The current code for message reassembly is erroneously assuming that
the the first arriving fragment buffer always is linear, and then goes
ahead resetting the fragment list of that buffer in anticipation of
more arriving fragments.

However, if the buffer already happens to be non-linear, we will
inadvertently drop the already attached fragment list, and later
on trig a BUG() in __pskb_pull_tail().

We see this happen when running fragmented TIPC multicast across UDP,
something made possible since
commit d0f91938 ("tipc: add ip/udp media type")

We fix this by not resetting the fragment list when the buffer is non-
linear, and by initiatlizing our private fragment list tail pointer to
the tail of the existing fragment list.

Fixes: commit d0f91938 ("tipc: add ip/udp media type")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 50010c20 ]

This is decrementing the pointer, instead of the value stored in the
pointer.  KASan detects it as an out of bounds reference.
Reported-by: "Berry Cheng 程君(成淼)" <chengmiao.cj@alibaba-inc.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 515c752d upstream.

There was a typo in the original.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=92865Signed-off-by: Maxim Sheviakov <mrader3940@yandex.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>