- 18 Apr, 2011 1 commit
-
-
Bryan Schumaker authored
If we fail to contact the gss upcall program, then no message will be sent to the server. The client still updated the sequence number, however, and this lead to NFS4ERR_SEQ_MISMATCH for the next several RPC calls. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 Apr, 2011 2 commits
-
-
Trond Myklebust authored
Currently, the state manager may continue to try recovering state forever even after the last filesystem to reference that nfs_client has umounted. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
Trond Myklebust authored
Since kernel 2.6.35, the SUNRPC Kerberos support has had an implicit dependency on a number of additional crypto modules. The following patch makes that dependency explicit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 Apr, 2011 6 commits
-
-
Bryan Schumaker authored
While decoding a secinfo reply, I store the list of supported sec flavors on a page accessible through res->flavors. Before reading each new flavor, I do some math to determine if there is enough space left on this page, and I break out of my read look if there isn't. In order to perform this check correctly, I need to use the address of res->flavors, rather than the address of res. When this loop was broken early I lied to the caller and told them that the entire list had been decoded. This could lead to problems if the caller tries to use any the garbage data claiming to be a valid sec flavor. I fixed this by using res->flavors->num_flavors as a counter, incrementing it every time a sec flavor is successfully decoded. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
We were always attempting sec flavor negotiation, even if the user told us a specific sec flavor to use. If that sec flavor fails, we should return an error rather than continuing with sec flavor negotiation. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
nfs4_lookup_root() is already configured to use either RPC_AUTH_UNIX or a user specified flavor (through -o sec=<whatever>). We should use this flavor first, and only attempt negotiation if it fails with -EPERM. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
NFS_MAX_SECFLAVORS should already take into account RPC_AUTH_UNIX and RPC_AUTH_NULL, so we don't need to set aside extra slots for them. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
There can be an infinite loop if gss_create_upcall() is called without the userspace program running. To prevent this, we return -EACCES if we notice that pipe_version hasn't changed (indicating that the pipe has not been opened). Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Weston Andros Adamson authored
mark_inode_dirty_sync() grabs the same inode lock! race conditions between holding the lock in pnfs_set_layoutcommit() and in mark_inode_dirty_sync() can result in a second call to pnfs_layoutcommit_inode(), but this will be a noop as NFS_INO_LAYOUTCOMMIT won't be set in the second call Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 Apr, 2011 31 commits
-
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
The inode was used in an earlier version of the code, but it isn't used anymore. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
We only need to call nfs_mark_request_dirty() once in nfs_writepage_setup(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jesper Juhl authored
In fs/nfs/super.c::nfs_fs_mount() we test for a NULL 'data': ... if (data == NULL || mntfh == NULL) goto out_free_fh; ... and then further down in the function we test 'data' again: ... nfs_fscache_get_super_cookie( s, data ? data->fscache_uniq : NULL, NULL); ... this second check is just dead code since there is no way 'data' could possibly be NULL here. We also rely on a non-NULL 'data' in more than one location between these two tests, further proving the point that the second test is bogus. This patch removes the dead code. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: don't allow mmap'ed pages to be dirtied while under writeback (try #3) [CIFS] Warn on requesting default security (ntlm) on mount [CIFS] cifs: clarify the meaning of tcpStatus == CifsGood cifs: wrap received signature check in srv_mutex cifs: clean up various nits in unicode routines (try #2) cifs: clean up length checks in check2ndT2 cifs: set ra_pages in backing_dev_info cifs: fix broken BCC check in is_valid_oplock_break cifs: always do is_path_accessible check in cifs_mount various endian fixes to cifs Elminate sparse __CHECK_ENDIAN__ warnings on port conversion Max share size is too small Allow user names longer than 32 bytes cifs: replace /proc/fs/cifs/Experimental with a module parm cifs: check for private_data before trying to put it
-
Linus Torvalds authored
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: thinkpad-acpi fails to load with newer Thinkpad X201s BIOS acer-wmi: Fix capitalisation of GUID in module alias sony-laptop: keyboard backlight fixes sony-laptop: only show the handles sysfs file in debug mode samsung-laptop: set backlight type staging: samsung-laptop has moved to platform/x86 samsung-laptop: Samsung R410P backlight driver samsung-laptop: add support for N230 model platform-drivers: x86: pmic: Restore the dropped buslock/unlock sony-laptop: fix early NULL pointer dereference msi-laptop: fix config-dependent build error eeepc-wmi: add keys found on EeePC 1215T asus-wmi: swap input name and phys asus-laptop: remove removed features from feature-removal-schedule.txt
-
Linus Torvalds authored
Gaah. When commit be85bcca reverted the export of file system uuid via /proc/<pid>/mountinfo, it also unintentionally removed the s_uuid field in struct super_block. I didn't mean to do that, since filesystems have been taught to fill it in (and we want to keep it for future re-introduction in the mountinfo file). Stupid of me. This adds it back in. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fetch cell pointer from platform_device->mfd_cell
-
Dave Chinner authored
nfs_scan_commit() is called with the inode->i_lock held, but it then calls __mark_inode_dirty() while still holding the lock. This causes a deadlock. Push the inode->i_lock into nfs_scan_commit() so it can protect only the parts of the code it needs to and can be dropped before the call to __mark_inode_dirty() to avoid the deadlock. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Will Simoneau <simoneau@ele.uri.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 53a7706d ("mlock: do not hold mmap_sem for extended periods of time") changed mlock() to care about the exact number of pages that __get_user_pages() had brought it. Before, it would only care about errors. And that doesn't work, because we also handled one page specially in __mlock_vma_pages_range(), namely the stack guard page. So when that case was handled, the number of pages that the function returned was off by one. In particular, it could be zero, and then the caller would end up not making any progress at all. Rather than try to fix up that off-by-one error for the mlock case specially, this just moves the logic to handle the stack guard page into__get_user_pages() itself, thus making all the counts come out right automatically. Reported-by: Robert Święcki <robert@swiecki.net> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commit 93f1c20b. It turns out that libmount misparses it because it adds a '-' character in the uuid string, which libmount then incorrectly confuses with the separator string (" - ") at the end of all the optional arguments. Upstream libmount (in the util-linux tree) has been fixed, but until that fix actually percolates up to users, we'd better not expose this change in the kernel. Let's revisit this later (possibly by exposing the UUID without any '-' characters in it, avoiding the user-space bug). Reported-by: Dave Jones <davej@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Karel Zak <kzak@redhat.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Keith Packard authored
The new BIOS has a slightly different EC version string. From a1541710300b083a1a9acff2890d721d15ede62b Mon Sep 17 00:00:00 2001 From: Keith Packard <keithp@keithp.com> Date: Sun, 13 Mar 2011 23:46:22 -0700 Subject: [PATCH] thinkpad-acpi: Some BIOS versions don't end in WW, remove check My X201s BIOS version string is 6QET46V1 (1.16 ). The EC version string is 6QHT28WW-1.09. The driver was requiring that both of these have 'WW' in positions 6 and 7. I don't know what the significance of having 'V1' there instead is, but removing the test makes the driver load on my machine. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
wmi:6AF4F258-B401-42Fd-BE91-3D4AC2D7C0D3 needs to be wmi:6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 in module alias for acer-wmi is automatically loaded. Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Marco Chiappero authored
Restore the original state on module removal, set the latest values on resume. When setting the keyboard backlight mode try to turn on/off backlight immediately. [malattia@linux.it: patch taken from a largely modified sony-laptop.c, ported and slightly modified to use defines already available.] Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Mattia Dongili authored
It makes no sense to expose this type of information to userspace unless the driver was explicitly loaded with the debug option. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Michal Marek authored
Cherry-picked from drivers/staging/samsung-laptop/samsung-laptop.c Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Michal Marek authored
Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Alberto Mardegan authored
Here's a trivial patch which adds support to the backlight device found in Samsung R410 Plus laptops. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [mmarek: cherry-picked from staging commit d542f180] Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Greg Kroah-Hartman authored
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [mmarek: cherry-picked from staging commit 0789b003] Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Jeff Layton authored
This is more or less the same patch as before, but with some merge conflicts fixed up. If a process has a dirty page mapped into its page tables, then it has the ability to change it while the client is trying to write the data out to the server. If that happens after the signature has been calculated then that signature will then be wrong, and the server will likely reset the TCP connection. This patch adds a page_mkwrite handler for CIFS that simply takes the page lock. Because the page lock is held over the life of writepage and writepages, this prevents the page from becoming writeable until the write call has completed. With this, we can also remove the "sign_zero_copy" module option and always inline the pages when writing. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Samuel Ortiz authored
In order for MFD drivers to fetch their cell pointer but also their platform data one, an mfd cell pointer is added to the platform_device structure. That allows all MFD sub devices drivers to be MFD agnostic, unless they really need to access their MFD cell data. Most of them don't, especially the ones for IPs used by both MFD and non MFD SoCs. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
* 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Allow PV-OPS kernel to detect whether XSAVE is supported xen: just completely disable XSAVE xen/debug: Don't be so verbose with WARN on 1-1 mapping errors. xen: events: fix error checks in bind_*_to_irqhandler()
-
Steve French authored
Warn once if default security (ntlm) requested. We will update the default to the stronger security mechanism (ntlmv2) in 2.6.41. Kerberos is also stronger than ntlm, but more servers support ntlmv2 and ntlmv2 does not require an upcall, so ntlmv2 is a better default. Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Steve French authored
When the TCP_Server_Info is first allocated and connected, tcpStatus == CifsGood means that the NEGOTIATE_PROTOCOL request has completed and the socket is ready for other calls. cifs_reconnect however sets tcpStatus to CifsGood as soon as the socket is reconnected and the optional RFC1001 session setup is done. We have no clear way to tell the difference between these two states, and we need to know this in order to know whether we can send an echo or not. Resolve this by adding a new statusEnum value -- CifsNeedNegotiate. When the socket has been connected but has not yet had a NEGOTIATE_PROTOCOL request done, set it to this value. Once the NEGOTIATE is done, cifs_negotiate_protocol will set tcpStatus to CifsGood. This also fixes and cleans the logic in cifs_reconnect and cifs_reconnect_tcon. The old code checked for specific states when what it really wants to know is whether the state has actually changed from CifsNeedReconnect. Reported-and-Tested-by: JG <jg@cms.ac> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
While testing my patchset to fix asynchronous writes, I hit a bunch of signature problems when testing with signing on. The problem seems to be that signature checks on receive can be running at the same time as a process that is sending, or even that multiple receives can be checking signatures at the same time, clobbering the same data structures. While we're at it, clean up the comments over cifs_calculate_signature and add a note that the srv_mutex should be held when calling this function. This patch seems to fix the problems for me, but I'm not clear on whether it's the best approach. If it is, then this should probably go to stable too. Cc: stable@kernel.org Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
Minor revision to the original patch. Don't abuse the __le16 variable on the stack by casting it to wchar_t and handing it off to char2uni. Declare an actual wchar_t on the stack instead. This fixes a valid sparse warning. Fix the spelling of UNI_ASTERISK. Eliminate the unneeded len_remaining variable in cifsConvertToUCS. Also, as David Howells points out. We were better off making cifsConvertToUCS *not* use put_unaligned_le16 since it means that we can't optimize the mapped characters at compile time. Switch them instead to use cpu_to_le16, and simply use put_unaligned to set them in the string. Reported-and-acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
Thus spake David Howells: The code that follows this: remaining = total_data_size - data_in_this_rsp; if (remaining == 0) return 0; else if (remaining < 0) { generates better code if you drop the 'remaining' variable and compare the values directly. Clean it up per his recommendation... Reported-and-acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
Commit 522440ed made cifs set backing_dev_info on the mapping attached to new inodes. This change caused a fairly significant read performance regression, as cifs started doing page-sized reads exclusively. By virtue of the fact that they're allocated as part of cifs_sb_info by kzalloc, the ra_pages on cifs BDIs get set to 0, which prevents any readahead. This forces the normal read codepaths to use readpage instead of readpages causing a four-fold increase in the number of read calls with the default rsize. Fix it by setting ra_pages in the BDI to the same value as that in the default_backing_dev_info. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=31662 Cc: stable@kernel.org Reported-and-Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
The BCC is still __le16 at this point, and in any case we need to use the get_bcc_le macro to make sure we don't hit alignment problems. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
Currently, we skip doing the is_path_accessible check in cifs_mount if there is no prefixpath. I have a report of at least one server however that allows a TREE_CONNECT to a share that has a DFS referral at its root. The reporter in this case was using a UNC that had no prefixpath, so the is_path_accessible check was not triggered and the box later hit a BUG() because we were chasing a DFS referral on the root dentry for the mount. This patch fixes this by removing the check for a zero-length prefixpath. That should make the is_path_accessible check be done in this situation and should allow the client to chase the DFS referral at mount time instead. Cc: stable@kernel.org Reported-and-Tested-by: Yogesh Sharma <ysharma@cymer.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Steve French authored
make modules C=2 M=fs/cifs CF=-D__CHECK_ENDIAN__ Found for example: CHECK fs/cifs/cifssmb.c fs/cifs/cifssmb.c:728:22: warning: incorrect type in assignment (different base types) fs/cifs/cifssmb.c:728:22: expected unsigned short [unsigned] [usertype] Tid fs/cifs/cifssmb.c:728:22: got restricted __le16 [usertype] <noident> fs/cifs/cifssmb.c:1883:45: warning: incorrect type in assignment (different base types) fs/cifs/cifssmb.c:1883:45: expected long long [signed] [usertype] fl_start fs/cifs/cifssmb.c:1883:45: got restricted __le64 [usertype] start fs/cifs/cifssmb.c:1884:54: warning: restricted __le64 degrades to integer fs/cifs/cifssmb.c:1885:58: warning: restricted __le64 degrades to integer fs/cifs/cifssmb.c:1886:43: warning: incorrect type in assignment (different base types) fs/cifs/cifssmb.c:1886:43: expected unsigned int [unsigned] fl_pid fs/cifs/cifssmb.c:1886:43: got restricted __le32 [usertype] pid In checking new smb2 code for missing endian conversions, I noticed some endian errors had crept in over the last few releases into the cifs code (symlink, ntlmssp, posix lock, and also a less problematic warning in fscache). A followon patch will address a few smb2 endian problems. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-