- 14 Jan, 2020 1 commit
-
-
Jan Kara authored
commit c70c176f upstream. Make the function available for outside use and fortify it against NULL kobject. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 Jan, 2020 39 commits
-
-
Greg Kroah-Hartman authored
-
Daniele Palmas authored
commit 0d3010fa upstream. This patch adds the following Telit ME910G1 composition: 0x110a: tty, tty, tty, rmnet Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 3e4f8e21 upstream. Amend the endpoint-descriptor sanity checks to detect all duplicate endpoint addresses in a configuration. Commit 0a8fd134 ("USB: fix problems with duplicate endpoint addresses") added a check for duplicate endpoint addresses within a single alternate setting, but did not look for duplicate addresses in other interfaces. The current check would also not detect all duplicate addresses when one endpoint is as a (bi-directional) control endpoint. This specifically avoids overwriting the endpoint entries in struct usb_device when enabling a duplicate endpoint, something which could potentially lead to crashes or leaks, for example, when endpoints are later disabled. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20191219161016.6695-1-johan@kernel.orgSigned-off-by:
-
Eric Dumazet authored
[ Upstream commit 9bbd917e ] There are few cases where the ndo_uninit() handler might be not called if an error happens while device is initialized. Since vlan_newlink() calls vlan_changelink() before trying to register the netdevice, we need to make sure vlan_dev_uninit() has been called at least once, or we might leak allocated memory. BUG: memory leak unreferenced object 0xffff888122a206c0 (size 32): comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s) hex dump (first 32 bytes): 00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00 ......as........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline] [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline] [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline] [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194 [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126 [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181 [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305 [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363 [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline] [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixe: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Petr Machata authored
[ Upstream commit 240ce7f6 ] When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting that band gets dropped. That is incorrect--no Qdisc was explicitly added when PRIO was created, and after removal, none should have to be added either. Fix PRIO by first attempting to create a default Qdisc and only falling back to noop when that fails. This pattern of attempting to create an invisible FIFO, using NOOP only as a fallback, is also seen in other Qdiscs. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit eb8ef2a3 ] Both vlan_dev_change_flags() and vlan_dev_set_egress_priority() can return an error. vlan_changelink() should not ignore them. Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 71130f29 ] Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafc ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d ("vxlan: allow setting ipv6 traffic class") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Pengcheng Yang authored
[ Upstream commit c9655008 ] When we receive a D-SACK, where the sequence number satisfies: undo_marker <= start_seq < end_seq <= prior_snd_una we consider this is a valid D-SACK and tcp_is_sackblock_valid() returns true, then this D-SACK is discarded as "old stuff", but the variable first_sack_index is not marked as negative in tcp_sacktag_write_queue(). If this D-SACK also carries a SACK that needs to be processed (for example, the previous SACK segment was lost), this SACK will be treated as a D-SACK in the following processing of tcp_sacktag_write_queue(), which will eventually lead to incorrect updates of undo_retrans and reordering. Fixes: fd6dad61 ("[TCP]: Earlier SACK block verification & simplify access to them") Signed-off-by:
Pengcheng Yang <yangpc@wangsu.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit be7a7729 ] This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d9e15a27 ] As diagnosed by Florian : If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue() can loop forever in : if (f->credit <= 0) { f->credit += q->quantum; goto begin; } ... because f->credit is either 0 or -2147483648. Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 : This max value should limit risks of breaking user setups while fixing this bug. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
Florian Westphal <fw@strlen.de> Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 47240ba0 ] If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 52cc73e5 ] Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: af0bd4e9 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 96cc4b69 ] Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff6 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff6 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7 ("[NET]: Add macvlan driver") Signed-off-by:
-
Chan Shu Tak, Alex authored
[ Upstream commit af1c0e4e ] When a frame with NULL DSAP is received, llc_station_rcv is called. In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1 when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a NULL XID response is returned unexpectedly, e.g. when the incoming frame is a NULL TEST command. To fix the error, simply remove the conditional operator. A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed. Signed-off-by:
Chan Shu Tak, Alex <alexchan@task.com.hk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Helge Deller authored
[ Upstream commit 75cf9797 ] Fix this compiler warning: kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’: arch/parisc/include/asm/cmpxchg.h:48:3: warning: value computed is not used [-Wunused-value] 48 | ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) arch/parisc/include/asm/atomic.h:78:30: note: in expansion of macro ‘xchg’ 78 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) | ^~~~ kernel/debug/debug_core.c:596:4: note: in expansion of macro ‘atomic_xchg’ 596 | atomic_xchg(&kgdb_active, cpu); | ^~~~~~~~~~~ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit 3b7995a9 ] When I doing fuzzy test, get the memleak report: BUG: memory leak unreferenced object 0xffff88837af80000 (size 4096): comm "memleak", pid 3557, jiffies 4294817681 (age 112.499s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 00 00 00 10 01 00 00 00 00 00 00 01 00 00 00 ............... backtrace: [<000000001c894df8>] bio_alloc_bioset+0x393/0x590 [<000000008b139a3c>] bio_copy_user_iov+0x300/0xcd0 [<00000000a998bd8c>] blk_rq_map_user_iov+0x2f1/0x5f0 [<000000005ceb7f05>] blk_rq_map_user+0xf2/0x160 [<000000006454da92>] sg_common_write.isra.21+0x1094/0x1870 [<00000000064bb208>] sg_write.part.25+0x5d9/0x950 [<000000004fc670f6>] sg_write+0x5f/0x8c [<00000000b0d05c7b>] __vfs_write+0x7c/0x100 [<000000008e177714>] vfs_write+0x1c3/0x500 [<0000000087d23f34>] ksys_write+0xf9/0x200 [<000000002c8dbc9d>] do_syscall_64+0x9f/0x4f0 [<00000000678d8e9a>] entry_SYSCALL_64_after_hwframe+0x49/0xbe If __blk_rq_map_user_iov() is failed in blk_rq_map_user_iov(), the bio(s) which is allocated before this failing will leak. The refcount of the bio(s) is init to 1 and increased to 2 by calling bio_get(), but __blk_rq_unmap_user() only decrease it to 1, so the bio cannot be freed. Fix it by calling blk_rq_unmap_user(). Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 8d558f02 ] We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a ("stmmac: Move the STMicroelectronics driver") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Alexander Shishkin authored
[ Upstream commit 92ca7da4 ] Commit: ccbebba4 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") skips the PT/LBR exclusivity check on CPUs where PT and LBRs coexist, but also inadvertently skips the active_events bump for PT in that case, which is a bug. If there aren't any hardware events at the same time as PT, the PMI handler will ignore PT PMIs, as active_events reads zero in that case, resulting in the "Uhhuh" spurious NMI warning and PT data loss. Fix this by always increasing active_events for PT events. Fixes: ccbebba4 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") Reported-by:
Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lkml.kernel.org/r/20191210105101.77210-1-alexander.shishkin@linux.intel.comSigned-off-by:
-
Thomas Hebb authored
[ Upstream commit 272a7210 ] NULL expressions are taken to always be true, as implemented by the expr_is_yes() macro and by several other functions in expr.c. As such, they ought to be valid inputs to expr_eq(), which compares two expressions. Signed-off-by:
Thomas Hebb <tommyhebb@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Andreas Kemnade authored
[ Upstream commit 62a1923c ] platform device aliases were missing, preventing autoloading of module. Fixes: 811b7006 ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators") Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.infoSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Shengjiu Wang authored
[ Upstream commit 556672d7 ] According to user manual, it is required that FLL_LAMBDA > 0 in all cases (Integer and Franctional modes). Fixes: 9a76f1ff ("ASoC: Add initial WM8962 CODEC driver") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Aditya Pakki authored
[ Upstream commit 6fc232db ] In rfkill_register, the struct rfkill pointer is first derefernced and then checked for NULL. This patch removes the BUG_ON and returns an error to the caller in case rfkill is NULL. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.eduSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Cristian Birsan authored
[ Upstream commit 858ce8ca ] Display the return code as decimal integer. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit ee699f89 ] Driver doesn't calculate total number of PFs configured on a given engine correctly which messed up resources in the PFs loaded on that engine, leading driver to exceed configuration of resources (like vlan filters etc.) beyond the limit per engine, which ended up with asserts from the firmware. Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 7113f796 ] Parity error from the hardware will cause PF to lose the state of their VFs due to PF's internal reload and hardware reset following the parity error. Restrict any configuration request from the VFs after the parity as it could cause unexpected hardware behavior, only way for VFs to recover would be to trigger FLR on VFs and reload them. Signed-off-by:
-
Mike Rapoport authored
[ Upstream commit 8fabc623 ] Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G. If a system has more physical memory than this limit, the swiotlb buffer is not addressable because it is allocated from memblock using top-down mode. Force memblock to bottom-up mode before calling swiotlb_init() to ensure that the swiotlb buffer is DMA-able. Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.orgSigned-off-by:
-
Daniel T. Lee authored
[ Upstream commit bba1b2a8 ] Previously, when this sample is added, commit 1c47910e ("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and 'sys_write' has been used without no prefixes. But currently there are no exact symbols with these under kallsyms and this leads to failure. This commit changes exact compare to substring compare to keep compatible with exact symbol or prefixed symbol. Fixes: 1c47910e ("samples/bpf: add perf_event+bpf example") Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.comSigned-off-by:
-
Tomi Valkeinen authored
[ Upstream commit c6b16761 ] The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit a841e285 ] The driver forgets to call pci_release_regions() in probe failure and remove. Add the missed calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.comSigned-off-by:
-
Phil Sutter authored
[ Upstream commit 16416655 ] With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is undefined for the signed 32-bit value 1. Avoid this by declaring 1 as unsigned. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 2a76352a ] Currently we add individual copy of same OPP table for each CPU within the cluster. This is redundant and doesn't reflect the reality. We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init() anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online() ->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug operations. It also may cause issues when the vexpress_spc_cpufreq driver is built as a module. Since ve_spc_clk_init is built-in device initcall, we should be able to use the same topology_core_cpumask to set the opp sharing cpumask via dev_pm_opp_set_sharing_cpus and use the same later in the driver via dev_pm_opp_get_sharing_cpus. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit ff397be6 ] efi_graphics_output_protocol::query_mode() returns info in callee-allocated memory which must be freed by the caller, which we aren't doing. We don't actually need to call query_mode() in order to obtain the info for the current graphics mode, which is already there in gop->mode->info, so just access it directly in the setup_gop32/64() functions. Also nothing uses the size of the info structure, so don't update the passed-in size (which is the size of the gop_handle table in bytes) unnecessarily. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit dbd89c30 ] If we've found a usable instance of the Graphics Output Protocol (GOP) with a framebuffer, it is possible that one of the later EFI calls fails while checking if any support console output. In this case status may be an EFI error code even though we found a usable GOP. Fix this by explicitly return EFI_SUCCESS if a usable GOP has been located. Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit 6fc3cec3 ] If we don't find a usable instance of the Graphics Output Protocol (GOP) because none of them have a framebuffer (i.e. they were all PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return EFI_SUCCESS even though we didn't find a usable GOP. Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are found, allowing the caller to probe for UGA instead. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 18a110b0 ] Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10 based kernel. Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is NULL. The nfnl socket was set to NULL by netns destruction running on another cpu. The exiting network namespace calls the relevant destructors in the following order: 1. ctnetlink_net_exit_batch This nulls out the event callback pointer in struct netns. 2. nfnetlink_net_exit_batch This nulls net->nfnl socket and frees it. 3. nf_conntrack_cleanup_net_list This removes all remaining conntrack entries. This is order is correct. The only explanation for the crash so ar is: cpu1: conntrack is dying, eviction occurs: -> nf_ct_delete() -> nf_conntrack_event_report \ -> nf_conntrack_eventmask_report -> notify->fcn() (== ctnetlink_conntrack_events). cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback. b. gets interrupted. cpu2: runs netns exit handlers: a runs ctnetlink destructor, event cb pointer set to NULL. b runs nfnetlink destructor, nfnl socket is closed and set to NULL. cpu1: c. resumes and trips over NULL net->nfnl. Problem appears to be that ctnetlink_net_exit_batch only prevents future callers of nf_conntrack_eventmask_report() from obtaining the callback. It doesn't wait of other cpus that might have already obtained the callbacks address. I don't see anything in upstream kernels that would prevent similar crash: We need to wait for all cpus to have exited the event callback. Fixes: 9592a5c0 ("netfilter: ctnetlink: netns support") Signed-off-by:
-
Marco Elver authored
[ Upstream commit 1a365e82 ] This fixes various data races in spinlock_debug. By testing with KCSAN, it is observable that the console gets spammed with data races reports, suggesting these are extremely frequent. Example data race report: read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2: debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline] do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112 __raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline] _raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873 get_partial_node mm/slub.c:1870 [inline] <snip> write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3: debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline] do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline] _raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191 spin_unlock_irqrestore include/linux/spinlock.h:393 [inline] free_debug_processing+0x1b3/0x210 mm/slub.c:1214 __slab_free+0x292/0x400 mm/slub.c:2864 <snip> As a side-effect, with KCSAN, this eventually locks up the console, most likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug -> KCSAN detects data race -> kcsan_print_report() -> printk lock -> deadlock. This fix will 1) avoid the data races, and 2) allow using lock debugging together with KCSAN. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Marco Elver <elver@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.comSigned-off-by:
-
Aleksandr Yashkin authored
[ Upstream commit 9e5f1c19 ] The ram_core.c routines treat przs as circular buffers. When writing a new crash dump, the old buffer needs to be cleared so that the new dump doesn't end up in the wrong place (i.e. at the end). The solution to this problem is to reset the circular buffer state before writing a new Oops dump. Signed-off-by:
Aleksandr Yashkin <a.yashkin@inango-systems.com> Signed-off-by:
Nikolay Merinov <n.merinov@inango-systems.com> Signed-off-by:
Ariel Gilman <a.gilman@inango-systems.com> Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com Fixes: 896fc1f0 ("pstore/ram: Switch to persistent_ram routines") [kees: backport to v4.9] Link: https://lore.kernel.org/stable/157831399811194@kroah.comSigned-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dmitry Vyukov authored
commit 31b35f6b upstream. It is completely unused and implemented only on x86. Remove it. Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
SeongJae Park authored
[ Upstream commit f9bd84a8 ] For each I/O request, blkback first maps the foreign pages for the request to its local pages. If an allocation of a local page for the mapping fails, it should unmap every mapping already made for the request. However, blkback's handling mechanism for the allocation failure does not mark the remaining foreign pages as unmapped. Therefore, the unmap function merely tries to unmap every valid grant page for the request, including the pages not mapped due to the allocation failure. On a system that fails the allocation frequently, this problem leads to following kernel crash. [ 372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40 [ 372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0 [ 372.012562] Oops: 0002 [#1] SMP [ 372.012566] Modules linked in: act_police sch_ingress cls_u32 ... [ 372.012746] Call Trace: [ 372.012752] [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40 [ 372.012759] [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback] ... [ 372.012802] [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback] ... Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset This commit fixes this problem by marking the grant pages of the given request that didn't mapped due to the allocation failure as invalid. Fixes: c6cc142d ("xen-blkback: use balloon pages for all mappings") Reviewed-by:
David Woodhouse <dwmw@amazon.de> Reviewed-by:
Maximilian Heyne <mheyne@amazon.de> Reviewed-by:
Paul Durrant <pdurrant@amazon.co.uk> Reviewed-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
SeongJae Park <sjpark@amazon.de> Signed-off-by:
-
