Skip to content

L
linux
Switch branch/tag
  1. 19 Dec, 2015 1 commit
  3. 15 Dec, 2015 1 commit
    • Charlie Mooney's avatar
      Input: elan_i2c - set input device's vendor and product IDs · 3eab4588
      Charlie Mooney authored 
      Previously the "vendor" and "product" IDs for the elan_i2c driver simply
reported 0000.  This patch modifies the elan_i2c driver to include the
Elan vendor ID and the touchpad's product id under
input/input*/{vendor,product}.

Specifically, this is to allow us to apply a generic Elan gestures config
that will apply to all Elan touchpads on ChromeOS.  These configs  match to
input devices in various ways, but one major way is by matching on vendor
ID.  Adding this patch allows the default Elan touchpad config to be
applied to Elan touchpads in this kernel by matching on devices that have
vendor ID 04f3.

Note that product ID is also available via custom sysfs entry "product_id"
as well.
Signed-off-by: default avatarCharlie Mooney <charliemooney@chromium.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      3eab4588
  5. 12 Dec, 2015 1 commit
  7. 11 Dec, 2015 1 commit
    • Javier Martinez Canillas's avatar
      Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload · b7d21058
      Javier Martinez Canillas authored 
      The Atmel maxtouch DT binding documents that the compatible string for
the device is "atmel,maxtouch" and the I2C core always reports a module
alias of the form i2c:alias where alias is the compatible string model:

$ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent
MODALIAS=i2c:maxtouch

But there isn't maxtouch entry in the I2C device ID table so when the
i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the
alias with a module to load:

$ modinfo atmel_mxt_ts | grep alias
alias:          of:N*T*Catmel,maxtouch
alias:          i2c:mXT224
alias:          i2c:atmel_mxt_tp
alias:          i2c:atmel_mxt_ts
alias:          i2c:qt602240_ts

So add the maxtouch entry to the I2C device ID table to allow the module
to be autoloaded when the device is registered via OF.
Signed-off-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      b7d21058
  9. 03 Dec, 2015 1 commit
  11. 02 Dec, 2015 2 commits
  13. 17 Nov, 2015 5 commits
  15. 13 Nov, 2015 1 commit
  17. 09 Nov, 2015 1 commit
  19. 06 Nov, 2015 1 commit
  21. 05 Nov, 2015 2 commits
  23. 03 Nov, 2015 4 commits
  25. 31 Oct, 2015 1 commit
  27. 28 Oct, 2015 1 commit
    • Stephen Chandler Paul's avatar
      Input: add userio module · 5523662e
      Stephen Chandler Paul authored 
      Debugging input devices, specifically laptop touchpads, can be tricky
without having the physical device handy. Here we try to remedy that
with userio. This module allows an application to connect to a character
device provided by the kernel, and emulate any serio device. In
combination with userspace programs that can record PS/2 devices and
replay them through the /dev/userio device, this allows developers to
debug driver issues on the PS/2 level with devices simply by requesting
a recording from the user experiencing the issue without having to have
the physical hardware in front of them.
Signed-off-by: default avatarStephen Chandler Paul <cpaul@redhat.com>
Reviewed-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      5523662e
  29. 27 Oct, 2015 3 commits
    • David Herrmann's avatar
      Input: evdev - add event-mask API · 06a16293
      David Herrmann authored 
      Hardware manufacturers group keys in the weirdest way possible. This may
cause a power-key to be grouped together with normal keyboard keys and
thus be reported on the same kernel interface.

However, user-space is often only interested in specific sets of events.
For instance, daemons dealing with system-reboot (like systemd-logind)
listen for KEY_POWER, but are not interested in any main keyboard keys.
Usually, power keys are reported via separate interfaces, however,
some i8042 boards report it in the AT matrix. To avoid waking up those
system daemons on each key-press, we had two ideas:
 - split off KEY_POWER into a separate interface unconditionally
 - allow filtering a specific set of events on evdev FDs

Splitting of KEY_POWER is a rather weird way to deal with this and may
break backwards-compatibility. It is also specific to KEY_POWER and might
be required for other stuff, too. Moreover, we might end up with a huge
set of input-devices just to have them properly split.

Hence, this patchset implements the second idea: An event-mask to specify
which events you're interested in. Two ioctls allow setting this mask for
each event-type. If not set, all events are reported. The type==0 entry is
used same as in EVIOCGBIT to set the actual EV_* mask of filtered events.
This way, you have a two-level filter.

We are heavily forward-compatible to new event-types and event-codes. So
new user-space will be able to run on an old kernel which doesn't know the
given event-codes or event-types.
Signed-off-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      06a16293
    • Javier Martinez Canillas's avatar
      Input: snvs_pwrkey - remove duplicated semicolon · 9ace41ad
      Javier Martinez Canillas authored 
      Remove the unneded semicolon since it is clearly a typo error.
Signed-off-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      9ace41ad
    • Hans de Goede's avatar
      Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits · 19556219
      Hans de Goede authored 
      commit 92bac83d ("Input: alps - non interleaved V2 dualpoint has
separate stick button bits") assumes that all alps v2 non-interleaved
dual point setups have the separate stick button bits.

Later we limited this to Dell laptops only because of reports that this
broke things on non Dell laptops. Now it turns out that this breaks things
on the Dell Latitude D600 too. So it seems that only the Dell Latitude
D420/430/620/630, which all share the same touchpad / stick combo,
have these separate bits.

This patch limits the checking of the separate bits to only these models
fixing regressions with other models.
Reported-and-tested-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Tested-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-By: default avatarPali Rohár <pali.rohar@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      19556219
  31. 26 Oct, 2015 4 commits
  33. 23 Oct, 2015 3 commits
  35. 19 Oct, 2015 1 commit
  37. 18 Oct, 2015 1 commit
    • Randy Dunlap's avatar
      Input: sur40 - add dependency on VIDEO_V4L2 · c8a1978e
      Randy Dunlap authored 
      Fix build errors due to missing Kconfig dependency.

drivers/built-in.o: In function `sur40_disconnect':
sur40.c:(.text+0x22be6e): undefined reference to `video_unregister_device'
sur40.c:(.text+0x22be77): undefined reference to `v4l2_device_unregister'
drivers/built-in.o: In function `sur40_process_video':
sur40.c:(.text+0x22c1d4): undefined reference to `v4l2_get_timestamp'
drivers/built-in.o: In function `sur40_probe':
sur40.c:(.text+0x22ca82): undefined reference to `v4l2_device_register'
sur40.c:(.text+0x22cb1a): undefined reference to `v4l2_device_unregister'
sur40.c:(.text+0x22cbf7): undefined reference to `video_device_release_empty'
sur40.c:(.text+0x22cc53): undefined reference to `__video_register_device'
sur40.c:(.text+0x22cc90): undefined reference to `video_unregister_device'
drivers/built-in.o: In function `sur40_vidioc_querycap':
sur40.c:(.text+0x22ccb0): undefined reference to `video_devdata'
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      c8a1978e
  39. 17 Oct, 2015 1 commit
    • Vladimir Zapolskiy's avatar
      Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock · 32470060
      Vladimir Zapolskiy authored 
      If common clock framework is configured, the driver generates a warning,
which is fixed by this change:

    root@devkit3250:~# cat /dev/input/touchscreen0
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 720 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
    Modules linked in: sc16is7xx snd_soc_uda1380
    CPU: 0 PID: 720 Comm: cat Not tainted 4.3.0-rc2+ #199
    Hardware name: LPC32XX SoC (Flattened Device Tree)
    Backtrace:
    [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
    [<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
    [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
    [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
    [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
    [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
    [<>] (clk_enable) from [<>] (lpc32xx_setup_tsc+0x18/0xa0)
    [<>] (lpc32xx_setup_tsc) from [<>] (lpc32xx_ts_open+0x14/0x1c)
    [<>] (lpc32xx_ts_open) from [<>] (input_open_device+0x74/0xb0)
    [<>] (input_open_device) from [<>] (evdev_open+0x110/0x16c)
    [<>] (evdev_open) from [<>] (chrdev_open+0x1b4/0x1dc)
    [<>] (chrdev_open) from [<>] (do_dentry_open+0x1dc/0x2f4)
    [<>] (do_dentry_open) from [<>] (vfs_open+0x6c/0x70)
    [<>] (vfs_open) from [<>] (path_openat+0xb4c/0xddc)
    [<>] (path_openat) from [<>] (do_filp_open+0x40/0x8c)
    [<>] (do_filp_open) from [<>] (do_sys_open+0x124/0x1c4)
    [<>] (do_sys_open) from [<>] (SyS_open+0x2c/0x30)
    [<>] (SyS_open) from [<>] (ret_fast_syscall+0x0/0x38)
Signed-off-by: default avatarVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      32470060
  41. 16 Oct, 2015 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7