- 10 Mar, 2010 5 commits
-
-
Jassi Brar authored
Rather than having the multiple definitions of the same clocks, define them in one common place and refer by SoC specific names. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Jassi Brar authored
Add missing semicolon after s3c2412_i2s_delay Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Barry Song authored
No point in duplicating this structure layout in each driver. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Cliff Cai authored
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Chaithrika U S authored
On TI DM6467 EVM, S/PDIF DIT codec fails to open as it is unable to install hardware params. This dummy codec has no set_fmt and set_sysclk implementations and calls from the application to these functions cause errors. This patch adds a new hardware params callback function for S/PDIF transciever codec. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 Mar, 2010 1 commit
-
-
Kuninori Morimoto authored
Signed-off-by: Phil Edworthy <Phil.Edworthy@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 Mar, 2010 3 commits
-
-
Mark Brown authored
Currently during pop/click debug we're inserting a delay both after every log message we generate and at explicit points in the sequence, slowing things down even further than they need to be especially when many writes get coalesced by the sequence generation code. Remove the per-printk delay and ensure that we have explicit delays where we say we want them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The flag is no longer used in the code so it just wastes a bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
I2C only at the minute. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 04 Mar, 2010 1 commit
-
-
Mark Brown authored
Report the current FIFO depth when delay is queried. The FIFO is only 16 frames deep so the latency will be at most a couple of miliseconds (and we tend to end up reporting zero most of the time) but it may help some applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 03 Mar, 2010 7 commits
-
-
Mark Brown authored
The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Avoids machine files having to peer into sound/soc which is a bit rude and icky. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The driver name gets used by dev_() logging so use something a bit more idiomatic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
The delay callback can be used by the core to query the delay on the dai caused by FIFO or delay in the platform side. In case if both CPU and CODEC dai has FIFO the delay reported by each will be added to form the full delay on the chain. If none of the dai has FIFO, than the delay will be kept as zero. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Peter Ujfalusi authored
Create a soc level wrapper for pcm_pointer callback. This will facilitate the soc level handling of different HW buffers in the audio path. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Peter Ujfalusi authored
My editor removes the tailing spaces, which causes problems when changing the soc-core.c Removing the space. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 Feb, 2010 1 commit
-
-
Jassi Brar authored
If we are to have a snd_soc_dai i.e, cpu_dai and codec_dai, shared among two or more dai_links we need to log the number of active users of the dai. For that, we change semantics of the snd_soc_dai.active flag from indicator to reference counter. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 Feb, 2010 3 commits
-
-
jassi brar authored
In order for having snd_soc_dais shared among two or more dai_links, remove the relatively global runtime field from the struct snd_soc_dai Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
jassi brar authored
Currently only the atmel driver make use of snd_soc_dai.runtime field. If the dais are to be shared among two or more dai_links, the field must be got rid of. So, in atmel driver reach the substream via dai_link->pcm so as to not depend of snd_soc_dai.runtime field. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
jassi brar authored
Passing pointer to relevant dai_link provides easier reach to the ASoC tree in suspend/resume of snd_soc_platform. It also provides direct access to the dai at the other end of the dai_link. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 Feb, 2010 2 commits
-
-
Mark Brown authored
Fixes a warning. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
Disable the amplifiers for the headset outputs, and do not select routings by default to the headset outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 Feb, 2010 4 commits
-
-
Peter Ujfalusi authored
OSCSET calculation was not correct in case of 44.1KHz sampling rate. With small adjustment both 48 and 44.1 KHz calculation now gives the correct value. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Peter Ujfalusi authored
In repeated playback the FIFOFLUSH bit remained set, and never has been cleared. Clear it during the setup phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Provide a sysfs file allowing userspace to inspect and change the pmdown_time setting at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Make the pmdown_time a per-card setting rather than a global one, initialised before the card initialisation runs. This allows cards to override the default setting if it makes sense to do so (for example, due to an unavoidable pop). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 12 Feb, 2010 2 commits
-
-
Mark Brown authored
The WM2000 is a low power, high quality handset receiver speaker driver with Wolfson myZone
™ Ambient Noise Cancellation (ANC). It provides enhanced voice communication quality in a noisy environment if the handset acoustics are designed appropriately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> -
Guennadi Liakhovetski authored
Audio on Migo-R cannot work if CONFIG_SH_DMA_API=y, but compilation should not break anyway. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 Feb, 2010 1 commit
-
-
Thomas Weber authored
This patch expands the omap3beagle sound soc for the beagle board clone DevKit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 Feb, 2010 4 commits
-
-
Paul Menzel authored
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Peter Ujfalusi authored
The serial interface (TDM/I2S) for the audio block have been constantly enabled. Introduce a new DAPM_SUPPLY for handling the AIF_EN bit, so the interface is only enabled, when there is a need for it. For example when only the analog loopback is enabled, there is no need to keep the serial interface active. I have added the persons who contributed to the Voice path of twl4030 codec driver, so they might have the ability to test this patch, and send an update for the Voice path, if it is necessary Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Daniel Mack authored
Enable the bulk regulators at probe time so we can safely disable them again when going to suspend without confusing the reference counter. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
This patch adds sound support for Phytec PhyCORE / PhyCARD modules in AC97 mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 Feb, 2010 3 commits
-
-
Grazvydas Ignotas authored
Pandora's external DAC is connected to VSIM TWL4030 supply, so let's start switching it too to save more power. Also DAC got it's own DAPM handler. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Grazvydas Ignotas authored
Pandora's external DAC is using 256*Fs output from the TWL4030 codec, and TWL4030 needs to have APLL enabled for it's 256*Fs output to function. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 Feb, 2010 3 commits
-
-
Peter Ujfalusi authored
The module unloading path had several problems: - it freed up the private structure twice - it freed up the codec structure, which was allocated as part of the private structure - it did not freed up the reg_cache - it did not unregistered the dais and the codec Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The WM8912 is a DAC only device register compatible with the WM8904 CODEC with ADC portions omitted. Support it within the WM8904 driver based on the configured I2C device name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Handle the output PGAs as part of the output powerup since they can never be powered separately and reorder things so that we remove the output shorts after both line and headphone outputs have been brought up, minimising the opportunity for any issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-