- 08 Feb, 2006 1 commit
-
-
Michael S. Tsirkin authored
Fix the following race scenario: - Device is up. - Port event or set mcast list triggers ipoib_mcast_stop_thread, this cancels the query and waits on mcast "done" completion. - Completion is called and "done" is set. - Meanwhile, ipoib_mcast_send arrives and starts a new query, re-initializing "done". Fix this by adding a "multicast started" bit and checking it before starting a send-only join. Signed-off-by:Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
- 03 Feb, 2006 1 commit
-
-
Ralph Campbell authored
Fix handling of directed route SMPs with a beginning or ending LID routed part. Signed-off-by:
Ralph Campbell <ralphc@pathscale.com> Signed-off-by:
Hal Rosenstock <halr@voltaire.com> Signed-off-by:
-
- 01 Feb, 2006 38 commits
-
-
Randy Dunlap authored
Remove lots of trailing whitespace. Nothing else. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
- Add info that structs, unions, enums, and typedefs are supported. - Add doc about "private:" and "public:" tags for struct fields. - Fix some typos. - Remove some trailing whitespace. Signed-off-by:
-
Martin Waitz authored
Update some parameter descriptions to actually match the code. Signed-off-by:
Martin Waitz <tali@admingilde.org> Signed-off-by:
-
Martin Waitz authored
Fix the syntax of some kernel-doc comments Signed-off-by:
-
Martin Waitz authored
kernel-doc errored out because it could not understand the new __copy_to_user definition. Now we allow return types with four words. Signed-off-by:
-
Manuel Lauss authored
Some time before 2.6.15, a third DDC channel was added to i810fb. On systems where these ddc pins are not connected, the probe takes about 10 seconds. Add a boot/module option for i810fb to explicitly probe for the 3rd ddc bus if needed. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Andriy Skulysh authored
This adds support for the hp680 backlight, as found in the hp6xx series of sh devices. Signed-off-by:
Andriy Skulysh <askulysh@image.kiev.ua> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
-
Antonino A. Daplas authored
When moving the cursor by writing to /dev/vcs*, the old cursor image is not erased. Fix by hiding the cursor first before moving the cursor to the new position. Signed-off-by:
-
Jeff Mahoney authored
When a filesystem has been converted from 3.5.x to 3.6.x, we need an extra check during file write to make sure we are not trying to make a 3.5.x file > 2GB. Signed-off-by:
Chris Mason <mason@suse.com> Signed-off-by:
-
Chris Mason authored
reiserfs: journal_transaction_should_end should increase the count of blocks allocated so the transaction subsystem can keep new writers from creating a transaction that is too large. Signed-off-by:
-
Chris Mason authored
write_ordered_buffers should handle dirty non-uptodate buffers without a BUG() Signed-off-by:
-
Chris Mason authored
In data=journal mode, reiserfs writepage needs to make sure not to trigger transactions while being run under PF_MEMALLOC. This patch makes sure to redirty the page instead of forcing a transaction start in this case. Also, calling filemap_fdata* in order to trigger io on the block device can cause lock inversions on the page lock. Instead, do simple batching from flush_commit_list. Signed-off-by:
-
Chris Mason authored
The b_private field in buffer heads needs to be zero filled when the buffers are allocated. Thanks to Nathan Scott for finding this. It was causing problems on systems with both XFS and reiserfs. Signed-off-by:
-
Chris Mason authored
After a transaction has closed but before it has finished commit, there is a window where data=ordered mode requires invalidatepage to pin pages instead of freeing them. This patch fixes a race between the invalidatepage checks and data=ordered writeback, and it also adds a check to the reiserfs write_ordered_buffers routines to write any anonymous buffers that were dirtied after its first writeback loop. That bug works like this: proc1: transaction closes and a new one starts proc1: write_ordered_buffers starts processing data=ordered list proc1: buffer A is cleaned and written proc2: buffer A is dirtied by another process proc2: File is truncated to zero, page A goes through invalidatepage proc2: reiserfs_invalidatepage sees dirty buffer A with reiserfs journal head, pins it proc1: write_ordered_buffers frees the journal head on buffer A At this point, buffer A stays dirty forever Signed-off-by: -
Christoph Hellwig authored
Use the generic_permission code with a proper wrapper and callback instead of having a local copy. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by:
-
Christoph Hellwig authored
This function is completely unused since the xattr permission checking changes. Remove it and fold __reiserfs_permission into reiserfs_permission. Signed-off-by:
-
Diego Calleja authored
According to http://bugzilla.kernel.org/show_bug.cgi?id=5778 fs/reiserfs/file.c is missing this check. Signed-off-by:
Diego Calleja <diegocg@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by:
-
Pekka Enberg authored
This patch replaces yield and retry loop with __GFP_NOFAIL in alloc_journal_list(). Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
Remove kmalloc() wrapper from fs/reiserfs/. Please note that a reiserfs /proc entry format is changed because kmalloc statistics is removed. Signed-off-by:
-
Paul E. McKenney authored
Updates to in-tree RCU documentation based on comments over the past few months. Signed-off-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Pat Gefre authored
Use EXPORT_SYMBOL_GPL in ioc3 shim layer. Signed-off-by:
Patrick Gefre <pfg@sgi.com> Signed-off-by:
-
Davi Arnaut authored
Add a missing return check from strnlen_user and fixes a off-by-one when terminating the string with zero. Signed-off-by:
Davi Arnaut <davi.arnaut@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Add missing memory constraint to stcrw() inline assembly. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
Fix modalias for ccw devices: cu_type should be in capitals as well. Signed-off-by:
Cornelia Huck <cohuck@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by:
-
Heiko Carstens authored
New default configuration. Signed-off-by:
-
Horst Hummel authored
The sleep_on function clears a running cqr without waiting for the related interrupt. This can lead to a panic at the time the interrupt is processed because the related memory might already be freed. Wait for clear-interrupt and de-queue cqr prior to return. Signed-off-by:
Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Horst Hummel authored
The open_count is increased for every opener, that includes the blkdev_get in dasd_scan_partitions. This tampers the open_count in BIODASDINFO. Hide the internal open from user-space. Signed-off-by:
-
Peter Oberparleiter authored
The return code of ccw_device_probe_console() is not properly handled. It should only return a valid ccw device pointer or a error value converted by ERR_PTR. Fix the console driver code to check with IS_ERR instead against NULL. Signed-off-by:
-
Jan Glauber authored
Remove useless s390 define from hangcheck-timer, remove wrong definition of a TOD second and other s390 ifdefs. Use monotonic_clock instead. Add hangcheck-timer option, copied from drivers/char/Kconfig. This is ugly but unless we have a big Kconfig cleanup we cannot include drivers/char/Kconfig... Signed-off-by:
Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by:
-
Jan Glauber authored
Add monotonic_clock interface, used by the hangcheck-timer. On s390 this is the same as sched_clock(). Signed-off-by:
-
Jan Glauber authored
The least significant bit of the TOD clock value returned by get_clock is the 4096th part of a microsecond. To get to nanoseconds the value needs to be divided by 4096 and multiplied with 1000. The current method multiplies first and then shifts the value to make the result as precise as possible. The disadvantage is that the multiplication with 1000 will overflow shortly after 52 days. sched_clock is used by the scheduler for time stamp deltas, if an overflow occurs between two time stamps the scheduler will get confused. With the patch the problem occurs only after approx. one year, so the chance to run into this overflow is extremly low. Signed-off-by:
-
Heiko Carstens authored
- Remove all CVS generated information like e.g. revision IDs from drivers/s390 and include/asm-s390 (none present in arch/s390). - Add newline at end of arch/s390/lib/Makefile to avoid diff message. Acked-by:
Andreas Herrmann <aherrman@de.ibm.com> Acked-by:
Frank Pavlic <pavlic@de.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Olaf Hering <olh@suse.de> Olaf reported UML doesn't build for him with a clear analisys of what happened - we're using NR_CPUS in files linked against glibc headers. Seems like it defines CONFIG_SMP but not CONFIG_NR_CPUS, so we get CONFIG_NR_CPUS undeclared. The fix is to move the declaration away from that header file and move it in asm-um headers, and to add that header where needed. Signed-off-by:Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Fix some simple sparse warnings - a lot more staticness and a misplaced __user. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In a recent fixup i386 code was copied raw to x86_64 subarch to make it compile again. Here there are some little fixups and resyncs needed for it (mainly for cleanliness sake) - I did an audit and found the rest of the code to be safe. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Fixes a bug introduced in commit e32dacb9 - index is initialized based on syscall before syscall is calculated. I'm bothering with this mainly because it gives a correct warning when the config option is enabled, even if the code is for a almost unused debugging option. Signed-off-by:
-
